@@joshuamoriarty5698 I assume they are seatbelt and weight sensor/airbag wires. Could unplugging them cause an issue with the airbag system? I just need to clean underneath so I won't unplugged them anyway.
Thanks for very much informative videos. I have a problem with the driver’s side electric seat of Accord 2004, while adjusting its back it feels on right side after reaching to certain position. I’m not sure but looks like there is an issue with the right-side joint which connects seat and its back. Any help? Thanks
some other video said that some of the wires on the bottom are for the side air bag and that you should disconnect the batter before removing the clips. something to maybe think about if you do this
Could you avoid removing the seat by removing the seat side cover, unbolting the seat belt receiver and then snake the new control cord under the seat to the electric plug?
No worries lil bro, those "bolts" have a technical name and that is "hex head cap screws" ...so you're fine calling them screws...or play it safe and call them fasteners like you were doing. One small thing, for me personally anyway, I'd rather hear you call the socket "14mm" rather than "#14". If you're under the hood of a vehicle and said "hey pass me that #10 wrench, I'd definitely be looking at you funny lol. But if you say hey pass me that 10 millimeter wrench, Id know exactly what you want.
Can you please do a video to replace the driver side "bottom" seat for a Honda Accord LX. The seat is a power seat. My bottom seat cushion is ripped and is showing the inside foam. Thanks in advance. If you can, please let me know if you can hit me up on email
When he was calling the bolts "screws" this led me to think that if this kid who doesn't know a "screw" from a bolt can do this, ANYONE can do this job.
I'm so proud of you Aiman!
Thank you, i needed this to fully detail my car!
Same reason I am here!
Same😂
Same !
Same 🙂👍🏽
Hell yea. My favorite you tube diyer! I just saw your video on how to staighten front of the car after collision. You rock youngster
YESSS. THANK YOU. THIS IS THE VIDEO NOBODY ELSE CAN MAKE 🙏🏾🙏🏾🙏🏾🙏🏾
Bro you remind me of me when I was a kid. Good job
Don't forget to disconnect the battery! Anything with the yellow plugs deals with airbags 😶
Was about to comment the same thing!
thanks bro
Biig legend 🙌 thank you
Great video! To the point, easy to follow, good energy and information. Thanks!
Very nice work -- this helps me know how to do my Honda Pilot seat. Props and thanks!
I used an extension like a real man
An American named Aiman. A very typical Malaysian name here. Thanks for the tutorial!
Nice work. Isn't it a good idea to remove the negative terminal of the battery before unplugging wires?
There are no super unsafe live wires popping out, those caps he presses to get them out contain them so you should be ok unless you dont have them
@@joshuamoriarty5698 I assume they are seatbelt and weight sensor/airbag wires. Could unplugging them cause an issue with the airbag system? I just need to clean underneath so I won't unplugged them anyway.
Great video, especially since I've got the exact same car. :D
Thanks!!!
awesome video! Very informative.
Thanks for very much informative videos.
I have a problem with the driver’s side electric seat of Accord 2004, while adjusting its back it feels on right side after reaching to certain position. I’m not sure but looks like there is an issue with the right-side joint which connects seat and its back.
Any help?
Thanks
Awesome vid man very helpful
Very helpful thanks
some other video said that some of the wires on the bottom are for the side air bag and that you should disconnect the batter before removing the clips. something to maybe think about if you do this
You are awesome 😎 can’t wait to take the seats out my car
Me too! I need to deep clean it, this makes that a breeze and so much easier to achieve full cleaning :)
I NEEDED THIS
Thank you!!!
Nice job!
Nice video kid thank you and the person who is helping you 😊😊😊😊LOT of Love be careful when you handle all this things and lots of BLESS 😊😊😊😊😊😊
Great video little man
Lol Nice work kid good video
Ahhhhh I neeed this! Thank you!
Is that 1/4 14mm socket?
Thanks bro!
Good job kid! Great video keep up the content.
You are so amazing, thank you:)
Thank you, I appreciate it! :)
Thanks
Can you link the tools you are using
How you change the bolt on it to remove from bracket
Can you drive the car without seat installed?
Thank you sir
Good video!
Very informative. Thanks much brother 😄
“A very wide bride” 😂
Thank you dawg. I'm broke as hell I'm trying to get these few quarters under here 😢..😂😂😂😂 might as well clean this MF too 👍🏾
Thanks bro 👍 lol.
Hold it like a bride 👰♀ 😂😂☝️☝️🤣🤣🤣🤣🤣
Could you avoid removing the seat by removing the seat side cover, unbolting the seat belt receiver and then snake the new control cord under the seat to the electric plug?
Your Milwaukee may not be strong enough but mine is 😂😂😂
he's the "weight reduction bro!" kind😂😂
No worries lil bro, those "bolts" have a technical name and that is "hex head cap screws" ...so you're fine calling them screws...or play it safe and call them fasteners like you were doing.
One small thing, for me personally anyway, I'd rather hear you call the socket "14mm" rather than "#14". If you're under the hood of a vehicle and said "hey pass me that #10 wrench, I'd definitely be looking at you funny lol. But if you say hey pass me that 10 millimeter wrench, Id know exactly what you want.
You didn’t mention the bolts holding the seatbelt, that’s like the most important part lol
"Hold it like a bride"
*gets stuck*
"A very wide bride"
🙏🏾🙏🏾🙏🏾
😂 "A very wide bride"
Can you please do a video to replace the driver side "bottom" seat for a Honda Accord LX. The seat is a power seat. My bottom seat cushion is ripped and is showing the inside foam. Thanks in advance. If you can, please let me know if you can hit me up on email
Fun fact: Aiman is really 48.
LIKE A BRIDE 🤣 A LITTLE WIDE ONE 🤣🤣🤣🤣
You're gonna break everything
A very wide bride... 😁😁😁
Very wide bride 😂
When he was calling the bolts "screws" this led me to think that if this kid who doesn't know a "screw" from a bolt can do this, ANYONE can do this job.
🤨 Really?.....You're petty 🙄
Big bride 😂
Should of fold the seat Back 😂