Not sure how I wound up seeing this video, but I found it quite fascinating. I love stuff like this. Great content, interesting, and good teaching. Thanks!
Thank you for sharing. Both methods are great depending on what one is going for. But I prefer the stitch attachment method for longevity and durability of the patch on the cap. I would make the patch with a bean stitch at the outer edges, then use a heat n bond lite at the back of my patch, align it at the centre of my cap and iron it on. Then using the free arm part of my computerised sewing machine, I would use satin stitch all around the edges of the patch to secure it to the cap and also give it a clean finish. Another way is to make sure I have the file in my embroidery machine or usb stick with the patch edge having an initial bean stitch finish as the last stitch. Then I create a satin stitch to finish up the patch attachment on the cap using the file in the embroidety machine. Having the original file in the machine will help with proper alignment and placement of the satin stitch on the patch and the cap.
Love your videos. We have been using the 1502 for 5 years but just started heat pressing patches on hats. The only issue we seem to have is leaving the indented / platen pattern, like a rectangle on the front of the hat. It is very difficult to get rid of it. Mostly on the 112 hats. Any suggestions?
Hi there! For the caps, you can try using these pillows before you press them on the heat press! Adding teflon paper on the top will make it look cleaner as well. www.amazon.com/Pillow-Pressing-Transfer-Resistant-Pillows/dp/B07SYJWW56/ref=asc_df_B07SYJWW56/?tag=hyprod-20&linkCode=df0&hvadid=366402393359&hvpos=&hvnetw=g&hvrand=3872075219214876505&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1015049&hvtargid=pla-795307238611&psc=1&tag=&ref=&adgrpid=76467134295&hvpone=&hvptwo=&hvadid=366402393359&hvpos=&hvnetw=g&hvrand=3872075219214876505&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1015049&hvtargid=pla-795307238611
You could but then you have the need to be very precise and ofc the patch is not stiff, so there is a great possibility that the patch itself will move
Thank you for watching! Every embroidery project requires some sort of stabilizer. There are very few instances where you won’t need backing, like when embroidering stuffed animals. Some stuffed animals can be bought pre-made for machine embroidery, and will not require backing.
9:42 … Hi, I love your videos, I'm new to this, could you show me how to make the circle to embroider the patch, how do I make the circle to be exactly the size of the patch? Thank you very much.
Hi there, thanks so much for watching. This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery
Hi! We recommend using an industrial-strength fabric glue or an iron-on adhesive like HeatnBond Ultrahold. Another option is to sew the patch onto the hat to ensure it stays in place securely. If you prefer an adhesive solution, make sure to follow the application instructions carefully, including the proper heat settings and pressing time, to achieve the best results.
The longevity of a glued-on patch largely depends on factors like the type of adhesive used, the fabric it’s applied to, and how the item is cared for (e.g., washing and drying). Generally, patches attached with high-quality fabric glue can last through several washes and regular wear, typically staying secure for a few months to a few years.
Hi Lance, there are various way on reducing this. Use a lower temperature: Lower the temperature of your heat press to the minimum required to activate the adhesive on your transfer material. Excessive heat can cause scorching and leave marks on the fabric. Pre-press the garment: Pre-pressing the garment for a few seconds before applying the transfer material can help to remove moisture and wrinkles, allowing for smoother application and reducing the risk of marks. Adjust pressure settings: Adjust the pressure settings on your heat press to ensure even pressure across the entire surface of the garment. Too much pressure can cause indentations, while too little pressure may result in incomplete transfers.
Hi there, thanks so much for watching. This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery
@@ricomatv right, that's the reason for my comment. Is that an actual wholesale price you get for that cap, and if so, at what bulk amount. That's important info for determining cost, your margin, and capital overlay. I have yet to find a price that cheap for a small business and especially below 12 dozen or more.
Great Vidieo! Did you use polyester thread? I tried it myself and the polyester-thread began to melt and became flat and shiny... Doesn't look as nice as yours...
Hi Stacy! You can find lots of options on Amazon. We linked the link below for you to check out some options! www.amazon.com/HeatnBond-UltraHold-Iron-Adhesive-Inches/dp/B000Y0083K/ref=asc_df_B000Y0083K/?tag=hyprod-20&linkCode=df0&hvadid=193987317966&hvpos=&hvnetw=g&hvrand=9782893350890125590&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1015049&hvtargid=pla-307218345982&psc=1
You barely show any of the digitizing or tacking it down. I can't tell if it start from the top or bottom. Did you use the Applique option, or did you manually add the run for tack down, and then manually add the satin for the border?
Hi Jonathan! This tutorial doesn't particular focus on digitizing but we have plenty of tutorials in which we go into depth on how to digitize patches. ruclips.net/video/YUyxfSS8emI/видео.html
is there any way to attach a patch with the embroidery machine onto a cap that you don't have the original file for? i tried it by putting the dimensions of the patch into chroma but it was a disaster haha.
That’d be tough because you’re essentially estimating where your outline stitch will land on the patch. It will be much harder to do vs if you had the patch design file. It could be done but will probably take more trial and error. Would recommend using the heat transfer method in that case.
Need this service I have embroidery machine need someone to out line my patches so I can embroidery them on & make patch for me point me right Direction please 💰
Hi there, thanks so much for watching. This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery
Seems like you need a little more education you say it’ll last longer The stitched embroidery that can be true because it’s stitched but the Proper Heat Press Hotronix does embroidery patches and you Can’t Remove Patch not even with a plier it will brutally take so much force that it will eventually come off but who is going to use a plier so the Heat Hat Press Patch will last just as long as the stitched. No disrespect but you can see proof of that on channel S & S Active Wear. Love You guys but Hat Heat Press is the Only Way.
@@katgilbert9194 well I have the 360IQ Hotronix Hat Press which heats from the bottom at 320 and 280 on Top and forget about it once it dries you literally have to add much muscle to take off. There’s a video RUclips S & S Activewear where the CEO of S & S tries with pliers to take off the Lakers EmbroideryPatch which was Heat Pressed by the 360 IQ.
1st. Logic and industry standard knowledge is stitching is more permanent than adhesive. I’m not even going to waste my time going into the physics and chemistry to prove it…But if you don’t have access to a sewing machine heat n bond is a great alternative. Ricoma is doing us a solid even showing us the process. Do what you can with the tools at hand.
Not sure how I wound up seeing this video, but I found it quite fascinating. I love stuff like this. Great content, interesting, and good teaching. Thanks!
Glad you enjoyed it!
Thank you for sharing. Both methods are great depending on what one is going for. But I prefer the stitch attachment method for longevity and durability of the patch on the cap.
I would make the patch with a bean stitch at the outer edges, then use a heat n bond lite at the back of my patch, align it at the centre of my cap and iron it on. Then using the free arm part of my computerised sewing machine, I would use satin stitch all around the edges of the patch to secure it to the cap and also give it a clean finish.
Another way is to make sure I have the file in my embroidery machine or usb stick with the patch edge having an initial bean stitch finish as the last stitch. Then I create a satin stitch to finish up the patch attachment on the cap using the file in the embroidety machine. Having the original file in the machine will help with proper alignment and placement of the satin stitch on the patch and the cap.
Hi Annie! Thank you so much for telling us about the technique you use, we truly appreciate it!
Love your videos. We have been using the 1502 for 5 years but just started heat pressing patches on hats. The only issue we seem to have is leaving the indented / platen pattern, like a rectangle on the front of the hat. It is very difficult to get rid of it. Mostly on the 112 hats. Any suggestions?
Hi there! For the caps, you can try using these pillows before you press them on the heat press! Adding teflon paper on the top will make it look cleaner as well.
www.amazon.com/Pillow-Pressing-Transfer-Resistant-Pillows/dp/B07SYJWW56/ref=asc_df_B07SYJWW56/?tag=hyprod-20&linkCode=df0&hvadid=366402393359&hvpos=&hvnetw=g&hvrand=3872075219214876505&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1015049&hvtargid=pla-795307238611&psc=1&tag=&ref=&adgrpid=76467134295&hvpone=&hvptwo=&hvadid=366402393359&hvpos=&hvnetw=g&hvrand=3872075219214876505&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1015049&hvtargid=pla-795307238611
Can you just do a satin stitch border to attach the patch and not do the satin stitch on the patch before hand?
You could but then you have the need to be very precise and ofc the patch is not stiff, so there is a great possibility that the patch itself will move
Last but not least, it would take a lot more time to align everything
Yes you could, you would need to make sure the patch is held in place maybe with adhesives or a tack down stitch first
Nice video! Where can i find that adhesive sheet to put on some patches?
Hi there! You can purchase it through Amazon! (:
Also what type of material do you recommend for patches?
We recommend using twill fabric!
What type of fabric did you use to make the patches?
Is it a specific type or just regular black fabric?
Hi there! There are a variety of different options you can choose from. We recommend using Twill or Polyester.
Awesome video - Just wondered why you didn't use stabiliser backing under the fabric for the badges?
Thank you for watching! Every embroidery project requires some sort of stabilizer. There are very few instances where you won’t need backing, like when embroidering stuffed animals. Some stuffed animals can be bought pre-made for machine embroidery, and will not require backing.
Have you done a label and used the embroider machine to create a thick border? do you have a video on that?
Hi Chad! Great suggestion, we will pass this down to the team (:
What is the brand of the adhesive sheet you are using? Can you use heat n bond Ultra ?
Absolutely!
@@ricomatv thank you !
I'm using heat n bond ultra hold, my temp and time is set at 380 and 30 and my patches still want stick. What am I doing wrong??
Hi there, please send us an email so we can help: service@ricoma.com
9:42 … Hi, I love your videos, I'm new to this, could you show me how to make the circle to embroider the patch, how do I make the circle to be exactly the size of the patch? Thank you very much.
Hi there, thanks so much for watching. This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery
So I ordered the heat and bond adhesive and not even a week later the patch is falling off the hat. What do you recommend I use for adhesive?
Hi! We recommend using an industrial-strength fabric glue or an iron-on adhesive like HeatnBond Ultrahold. Another option is to sew the patch onto the hat to ensure it stays in place securely. If you prefer an adhesive solution, make sure to follow the application instructions carefully, including the proper heat settings and pressing time, to achieve the best results.
Just asking but what if I heat press the patch and then add a couple stitches hand sewed to keep it in place would that work?
That's an interesting idea! But, we've never tried that method. Thanks for watching our video!
If you use the good adhesive it says not to try to sew through it because it can break needles.
What type of Paper did I heat downward on the Patch before u heat on the cap plz?
How long does the glued on patch stay glued on please?
The longevity of a glued-on patch largely depends on factors like the type of adhesive used, the fabric it’s applied to, and how the item is cared for (e.g., washing and drying). Generally, patches attached with high-quality fabric glue can last through several washes and regular wear, typically staying secure for a few months to a few years.
15:20 The indentation marks in the hat caused by the lower platen. How can you avoid those heat press lower platen marks that are clearly visible?
Hi Lance, there are various way on reducing this.
Use a lower temperature: Lower the temperature of your heat press to the minimum required to activate the adhesive on your transfer material. Excessive heat can cause scorching and leave marks on the fabric.
Pre-press the garment: Pre-pressing the garment for a few seconds before applying the transfer material can help to remove moisture and wrinkles, allowing for smoother application and reducing the risk of marks.
Adjust pressure settings: Adjust the pressure settings on your heat press to ensure even pressure across the entire surface of the garment. Too much pressure can cause indentations, while too little pressure may result in incomplete transfers.
Video says that the method for using the machine is best for leather patches. Can we get a video on how to do those?
Hi! We have added the link below for one of our videos.
ruclips.net/video/s1oDBrW28AQ/видео.html
What is a cutaway stabilizer when usinf heat press nethod.....and where can we buy the adhesive sheets from?
Hi there, thanks so much for watching. This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery
I don't know much about patches but would like to know the reason why do patches separate than embroidery directly first time onto the cap.
It’s more efficient to do the patches in bulk
Another great method to use. Thanks Ricoma!
Your cap prices are insane. Where are you getting that?
Hi there, we are providing advice when it comes to pricing and it all depends on the work/time/cost of goods.
@@ricomatv right, that's the reason for my comment. Is that an actual wholesale price you get for that cap, and if so, at what bulk amount. That's important info for determining cost, your margin, and capital overlay. I have yet to find a price that cheap for a small business and especially below 12 dozen or more.
Great Vidieo! Did you use polyester thread? I tried it myself and the polyester-thread began to melt and became flat and shiny... Doesn't look as nice as yours...
Thanks for watching! We used 60 weight thread.
Great video, as a fellow youtube creator, please add video chapter tags next time, it allow for easy access.
Thank you for the feedback!
What is the fabric used for embroidering the patch on?
We used regular fabric!
@@ricomatv what is the name of fabric used?
Nice work
Thanks for watching, Cesar!
What brand of adhensive?
Hi! Since we are using heat, you can use the Heat N Bond brand.
What kind of adhesive sheet do you use?
Hi Stacy! You can find lots of options on Amazon. We linked the link below for you to check out some options!
www.amazon.com/HeatnBond-UltraHold-Iron-Adhesive-Inches/dp/B000Y0083K/ref=asc_df_B000Y0083K/?tag=hyprod-20&linkCode=df0&hvadid=193987317966&hvpos=&hvnetw=g&hvrand=9782893350890125590&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1015049&hvtargid=pla-307218345982&psc=1
I would love to promote that ricoma on my youtube channel along side my personal brand.
Thanks!
We got your back!
You barely show any of the digitizing or tacking it down. I can't tell if it start from the top or bottom. Did you use the Applique option, or did you manually add the run for tack down, and then manually add the satin for the border?
Hi Jonathan! This tutorial doesn't particular focus on digitizing but we have plenty of tutorials in which we go into depth on how to digitize patches. ruclips.net/video/YUyxfSS8emI/видео.html
What website you use to purchase the $3.50 hats
Hi there, you can purchase these caps from Otto Caps --->ottocap.com/
This is so cool
Thank you for watching, Mike!
is there any way to attach a patch with the embroidery machine onto a cap that you don't have the original file for? i tried it by putting the dimensions of the patch into chroma but it was a disaster haha.
That’d be tough because you’re essentially estimating where your outline stitch will land on the patch. It will be much harder to do vs if you had the patch design file. It could be done but will probably take more trial and error. Would recommend using the heat transfer method in that case.
Love this!!
Need this service I have embroidery machine need someone to out line my patches so I can embroidery them on & make patch for me point me right Direction please 💰
Hi there, thanks so much for watching. This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery
Love both but going with heat press because lot faster and cheap
Thanks for responding, Ramon!
The stiches didn't quite line up properly on the embroidery method. You should of acknowledged that.
Thanks for letting us know and thank you for watching. Which method would you have picked? Have you ever tried any of them?
👍🏽🔥
Why not just embroider the “patch” right on the hat?
There is a limit to how large a design can be embroidered. The patch can be a little bigger.
Seems like you need a little more education you say it’ll last longer The stitched embroidery that can be true because it’s stitched but the Proper Heat Press Hotronix does embroidery patches and you Can’t Remove Patch not even with a plier it will brutally take so much force that it will eventually come off but who is going to use a plier so the Heat Hat Press Patch will last just as long as the stitched. No disrespect but you can see proof of that on channel S & S Active Wear. Love You guys but Hat Heat Press is the Only Way.
Thank you for the feedback!
What kind of adhesive do you use with your Hotronix press that would make it that strong?
@@katgilbert9194 well I have the 360IQ Hotronix Hat Press which heats from the bottom at 320 and 280 on Top and forget about it once it dries you literally have to add much muscle to take off. There’s a video RUclips S & S Activewear where the CEO of S & S tries with pliers to take off the Lakers EmbroideryPatch which was Heat Pressed by the 360 IQ.
@@RamboBigPapi I saw this video too. I don't think people realize how strong these adhesives are...but I am curious how they last beyond 5 years.
1st. Logic and industry standard knowledge is stitching is more permanent than adhesive. I’m not even going to waste my time going into the physics and chemistry to prove it…But if you don’t have access to a sewing machine heat n bond is a great alternative. Ricoma is doing us a solid even showing us the process. Do what you can with the tools at hand.