Ok thanks a lot, maybe that guy used a thick VND / CPL filter that could have caused vignetting on the ultra wide angle lens. Happy to hear that you didn’t have issues with one of yours. Looking forward to receiving my parcel now!
Thank you for the video! I'm waiting to pick up my order. ) As soon as I receive my order, I will immediately order a set of FX filters. I hope that in the future you will improve the grip. ;)
I can't unscrew the inner ring to use the IP13/14 adapter - it seems like its locked in place real tight. Any suggetions? EDIT: Ok, I swear it was not possible to unscrew - however I just tried again and it just flew of the filter with the first touch :D
I have the 12 Pro Max Polarpro grip (love it) and will be upgrading to the 16 when launched. I will have a thin usb cable attached to an SSD enclosure on the MagSafe point. Will the grip have a gap that could sit on top of the usb cable? If no gap at all I’ll need to weigh my options 😢
I ordered the iPhone 15 VND filter. The box it ships in is pretty big compared to the filter itself. The filter also comes with a front cover. Would it be an idea to develop a rear cover that fits the back of the filter (and also the back of the 67mm adapter). That way the total package would remain small and I could just slip the filter in my jeans pocket. The box is a little too big for that. Cheers!
Will these cases fit the iPhone 14 Pro? I have the light chaser setup for the 14 pro, but the case in my opinion is 👎, I like the looks of these much better. Hope to hear back, thank you.
Would like to know if i already bought the 67mm can i thread the 13/14 mist vnd or i have to necessarly buy the 13/14 adapter to use it with the litechaser 15?
Can you please provide me the specification and the part number of the ricon mat box adapter and the black case that goes on top of the 67mm to 82mm lenses case? Thanks a lot.
You will need a 67 to 82mm step up ring and then you can mount the recon onto our LCP 15 67mm Filter adapter: www.polarpro.com/products/step-up-rings/?variant=67mm-82mm www.polarpro.com/products/iphone-15-filter-adaptor/
One suggestion for the future iteration/upgrade of the Bluetooth shutter release: please upgrade the physical button to a softer action button. For those of us who use the Bluetooth shutter button for photography, the hard click or actuation of the shutter button really does cause camera shake.
I’ve got a 15 Pro Max, and the photos look blurry around the outside, particularly towards the bottom. I do have cheap lens protectors (my iPhone XS lens got cracked, so taking no chances). However I’m open to ditching these cheap lens protectors. Will using this help? I’ve seen people online moaning that their 15 pro max also take blurry photos. Is this a defect in this model?
The 67mm adapter has some production issue. It’s not compatible with 3rd party filters. It threads on just fine but the wide angle lens clips a tiny bit into the corner of your picture. Tried 3 different 2 in 1 filters so far.
The Adapter itself does not vignette, or when our filters are installed does not vignette. If you use super thick filters that we don't make we cant control those results
Hi, an early reviewer of the LiteChaser Pro 15 in a YT video (ruclips.net/user/results?search_query=litechaser+pro+15) said that the 67mm filter holder is not correctly centered which makes the filter frame visible when using the ultra wide angle lens. Just by offsetting it by 1 or 2 millimeters, it seems to solve the issue but unfortunately the filter mount can’t be locked anymore that way. Did that guy get an early prototype or what? I’d be surprised if it was not something you tested when designing that part and it’d be terribly disappointing if the UW lens was not fully usable with a VND threaded on it. Thanks for your answer on that issue. I'm looking forward to receiving my order but I'm a bit nervous about that now..
The Adapter itself does not vignette, or when our filters are installed does not vignette. If you use super thick filters that we don't make we cant control those results
Ok thanks a lot, maybe that guy used a thick VND / CPL filter that could have caused vignetting on the ultra wide angle lens. Happy to hear that you didn’t have issues with one of yours. Looking forward to receiving my parcel now!
Yeeeaahh! Been waiting for this! Thanks Jeff!
You got it!
Thank you for the video! I'm waiting to pick up my order. ) As soon as I receive my order, I will immediately order a set of FX filters.
I hope that in the future you will improve the grip. ;)
Nice. The desert one looks very cool. Allmost regret ordering the black case 😊
The Desert one is clean
Hoping this ships on time, barely ordered mine today.
Nice you will love it
Looking good!
So you need a 67mm Filter Adaptor to add the Litechaser 15 case?
If you are trying to connect a 67mm filter you will need that part
I can't unscrew the inner ring to use the IP13/14 adapter - it seems like its locked in place real tight. Any suggetions?
EDIT: Ok, I swear it was not possible to unscrew - however I just tried again and it just flew of the filter with the first touch :D
I have the 12 Pro Max Polarpro grip (love it) and will be upgrading to the 16 when launched. I will have a thin usb cable attached to an SSD enclosure on the MagSafe point. Will the grip have a gap that could sit on top of the usb cable? If no gap at all I’ll need to weigh my options 😢
Oh yah that’s a good idea for the 16
Great review. I have a question: what filter would you recommend for the iPhone 15 Pro Max? What size and with what adjustment range?
Cp and the VND are most popular
@@PolarProFilters Thank you very much
I ordered the iPhone 15 VND filter. The box it ships in is pretty big compared to the filter itself. The filter also comes with a front cover. Would it be an idea to develop a rear cover that fits the back of the filter (and also the back of the 67mm adapter). That way the total package would remain small and I could just slip the filter in my jeans pocket. The box is a little too big for that. Cheers!
Good feedback, appreciate you sending it our way
Just ordered the set up with CP and VND filters.
Nice! What color did you go with?
Is there enough clearance with the 67mm adapter to allow a magsafe mount to fully connect? I have the Moment tripod mount specifically.
Not sure, we don’t have that mount
@PolarProFilters When do you expect to have the 15 Pro Max kit in any European Amazon stores?
No ETA from our end, that is dependent on our EU distributors
Will these cases fit the iPhone 14 Pro? I have the light chaser setup for the 14 pro, but the case in my opinion is 👎, I like the looks of these much better. Hope to hear back, thank you.
These only fit the IP15, the 14’s are a different size
Will the 67mm adapter allow for other filters to fit on it such as Freewell? Or is it only able to use PolarPro?
Any 67mm works
Would like to know if i already bought the 67mm can i thread the 13/14 mist vnd or i have to necessarly buy the 13/14 adapter to use it with the litechaser 15?
Yes you need the 13/14 Adapter if you are trying to use the 13/14 filters on the LCP 15 Case
Hi, is there any set up in the PolarPro ecosystem that would allow me to use an nd filter with the Iphone 15's ultra wide angle lens ?
Yes, you would use the IP15 67mm filter adapter and thread on a 67mm ND filter
Can you please provide me the specification and the part number of the ricon mat box adapter and the black case that goes on top of the 67mm to 82mm lenses case? Thanks a lot.
You will need a 67 to 82mm step up ring and then you can mount the recon onto our LCP 15 67mm Filter adapter:
www.polarpro.com/products/step-up-rings/?variant=67mm-82mm
www.polarpro.com/products/iphone-15-filter-adaptor/
Can we use the 67mm ND filter for iPhone 15 pro max instead of the small 13 and 14 ND filter, Is there an any difference between them in quality?
Yes, and assuming you are talking about all our ND filters, they are the same glass.
Does the 67mm adapter come with the light chaser 15 + Defender kit ? Thanks
The LiteChaser 15 and Defender come with the LiteChaser and Defender. You add on anything else you want individually
One suggestion for the future iteration/upgrade of the Bluetooth shutter release: please upgrade the physical button to a softer action button. For those of us who use the Bluetooth shutter button for photography, the hard click or actuation of the shutter button really does cause camera shake.
Love it
I’ve got a 15 Pro Max, and the photos look blurry around the outside, particularly towards the bottom. I do have cheap lens protectors (my iPhone XS lens got cracked, so taking no chances). However I’m open to ditching these cheap lens protectors. Will using this help? I’ve seen people online moaning that their 15 pro max also take blurry photos. Is this a defect in this model?
The IP15 Pro Max should take really sharp photos
I know the grip from the Lite Chaser 12 won't work on my 15 Pro - but will the shutter? Thanks.
The BT shutter will work with the IP15
Any way to make use of my filters from my Lite Chaser 12 set-up? Thanks.
No, the IP12 filters are too small and will vignette on the IP15 system
Sorry for the dumb Q, can you use these filters/lens for photography too?
Yah the CP and UV are pretty popular for Photo use
Is the VND filter compatible with iPhone 15 Pro Max 3x and 5x zoom ?
Yes
How do you remove the top part of the grip in order to put the bluetooth button on?
3:45 in this video to install / remove. The top part of the grip pops off.
Are you guys going to make some for android phones ?
No plans at the moment
Hey, your website won't let me create a login... I want to buy...?
Shoot oliver@polarpro.com an email. you can also check out without creating an account and we can link it later
The 67mm adapter has some production issue. It’s not compatible with 3rd party filters. It threads on just fine but the wide angle lens clips a tiny bit into the corner of your picture. Tried 3 different 2 in 1 filters so far.
The Adapter itself does not vignette, or when our filters are installed does not vignette. If you use super thick filters that we don't make we cant control those results
Hi, an early reviewer of the LiteChaser Pro 15 in a YT video (ruclips.net/user/results?search_query=litechaser+pro+15) said that the 67mm filter holder is not correctly centered which makes the filter frame visible when using the ultra wide angle lens. Just by offsetting it by 1 or 2 millimeters, it seems to solve the issue but unfortunately the filter mount can’t be locked anymore that way. Did that guy get an early prototype or what? I’d be surprised if it was not something you tested when designing that part and it’d be terribly disappointing if the UW lens was not fully usable with a VND threaded on it. Thanks for your answer on that issue. I'm looking forward to receiving my order but I'm a bit nervous about that now..
The Adapter itself does not vignette, or when our filters are installed does not vignette. If you use super thick filters that we don't make we cant control those results
"LiteChaser" OR "LightChaser" 😉
Title updated thanks! Haha