Hey lee, do you happen to have a ls3 I could buy off a you for cheap I have a 95 Silverado my second project and I need an engine for it and what's better than a 5.7 a ls3 Soo lmk
@chadlustig I'm not talking about those, those I don't mind as much because they can easily be skipped past, I'm talking about the youtube sponsored ads. The ones you have to wait until you can skip them.
Quick tip for you. If you hold the clutch in and put the gas pedal to the floor, the car goes into “clear flood mode”. This cuts the fuel system so you can turn it over without starting. It’s a good thing to use if you’re priming the motor as well. If you have an auto car you can mash the brake pedal and gas at the same time and it will do the same thing. Works on all ford vehicles at least since 2005ish from my experience. 20:54
Dont know about manuals but pretty sure you just have to push the gas pedal all the way woth no brakes. Also i think its for drive by wire vehicles only
@@hank1556 standards won’t crank unless the clutch pedal is all the way down. Ford went to DBW in 05/06 for the most part. It’s been a while since I did it on my 06 f 150 so it probably doesn’t need the brake pedal.
@@hank1556 Unless the manual has a no clutch start override for off-roading then I'd imagine the clutch is pushed with the fuel pedal to get the circuit closed from the clutch start safety
100% its the rear main seal, bad backfire will cause this. When you lost that intake cap when it blew off was the same time the rear main seal blew out. i will put money on it.
@@danerasmussen6468depending on your age and a a couple other factors talking about going between 6 cylinder and 8 cylinder engine could be the difference of a couple hundred dollars a month m, which would add up to $1000s every year/ 6 months depending of your policy
The silver and red boss 302 got hit by a North Myrtle Beach police sergeant he was drunk driving we was there it happened at mustang week 2023 he hit it in a jeep the mustang was in mint condition till that
The Hoss 302 lives on. It's a bummer, but you know it's all part of it. Hopefully not a cracked block, and just a rear main seal. Still awesome. Thanks Ray
Just bought a new to me 2012 GT/CS off a good friend of mine two days ago for dirt cheap because the Coyote has a rod knock. Thanks to this video and the first one done on this car, I know roughly what to expect and what upgrades to do while the engine is out. Thanks, Lee!
Lee, love your channel and as a very long time supporter and as a 45 year collision shop owner/retired, I believe it’s time for you to invest in at least a used unibody frame bench and a measuring system which can be picked up used very reasonably. Yes, I can see just how talented you guys are with your forklift but your life and beloved projects. would be so much happier 😊
On a second watch I was thinking it is a good thing you changed over the dash/key/wiring… that way you keep the red key and the track tuning that ford made for the Boss 302. I have a 13 Boss and a friend just bought a used 12. His didn’t come with the red key and we have to do a bunch of things to get a new one. The red key is what makes the Boss a BOSS! Also… not sure if the Laguna Secas shocks and struts survived… but you should use those in the Hoss… the LS did have different suspension than the regular Boss. I regret I should have bought the LS suspension when I had a chance.
Lee said he has to swap over the entire electrical system…..I immediately think oh god, I’m praying for his sanity to stay intact ( hopefully it goes a lot smoother than the demon )
Yeah those boring parts that he skips are more important than what people think, you can’t just throw something together and half ass explain the build then expect people or viewers to fill in the blanks on challenges you had to overcome during the build.
I really enjoy this series because my mom had a boss and apparently loved driving it fast. She unfortunately passed when i was a very young kiddo but she lives on in my heart. Apparently she rolled her's 4 times 😆 I think she enjoyed it. One day man, one day imma get a boss to honor her.
Hoss 302 nice , I had a 1988 strawberry red mustang 5.0 5 speed back in the day , bought it brand new an had HOSS’ N placed on the windshield drove it for 3 yrs never had an issue then traded for a 1991 LX notch back crystal blue 5 speed an man I loved it , drove it 5 yrs an 230,000 miles an sold it of 5500 bucks in 96 an had few more fox bodys an now old an drive a f150 97 step side stx truck so hope y’all get oil leak fix cheap ❤the car man
the little yellow connector on the passenger side is for the curtain airbags. It runs down the A pilar only on the passenger's side and connects right under the dash. I know this because I just changed the ac blend door actuator in my f150 and remember the same plug.
This is the first of your long videos I've really watched. I enjoyed it a lot. Sorry to see you've got an oil leak that's going to require some disassembly. Unless there is a block issue, I agree with your preliminary assessment of it being the rear main seal. I hope to see a followup video on it.
I’m a ford mechanic but don’t quote me on this but ford uses the same harness in different trim levels so that plug could be for a higher optioned mustang.
Man, if i were more on-time to this video, I could have answered every single question. I converted my ‘14 V6 auto into a Boss 302 literally a year before.
Some gloss black skirts and mirrors would make it look so good, match all the nice black on it 💪🏼 just any of the bland black plastics, i did it to my BA falcon and it's literally nigĥt and day. So SO much better. as another red/black ford owner, i love the build man.
Tech here, when you have brak fluid on anything, water works soooooo much better than just using brake clean. It's funny to say but I'm telling you it works.
I repaired one years ago easiest way to do this. Clip it from rear to front with florist and windshield posts and it came out beautiful rather than go through all that with this trying to repair things for Clips would be the deal. Trust me on that. Good luck with it Barry. 1:13
That one plug may be for running lights behind the head light switch you push in turn it and it pulls out than you can plug it in now I may be wrong just had something similar happen with me
Pretty cool man, I would love to be able to take 2 or 3 cars and make one but that is a little out of my range to even attempt. Maybe one day. It was really cool to see this and the transformation.
Guys guys!! You should've sectioned the cars and put them together.. right behind the shifter to retain all the necessary stuff to use the shifter and also have the proper vin for the boss 302 not to mention the entire wire harness.. would've saved you soon much time and headache... In my opinion anyway
That ngauge is a turning jewel hopefully it's a Lund ngauge and is still supported and probably the best coyote tuner if it's HP well you're shit out of luck and it's unsupported. That ngauge holds the performance and stock tune but also shows you every sensor and run diagnostic plus data logging for future tunes.
12:33 Please for the love of God, remove those damned vampire taps and repair the wire to prevent corrosion, and electrical gremlins. Those things are terrible.
Guessing the H pipe tapers down due to the side pipes. Wonder if widening might create too much negative pressure for the side pipes to function properly, or even for the setup in general
I just wanted to give you guys a heads up. There's this new invention called gloves ! You're going to find it really helpful when it comes to handling glass 😅
Use code LIFELEE to get 55% off your first month at drift.co drft.info/3Y73dCq
You took what almost everyone would say was two piles of junk, and made an awesome car. F n A Cotton, F n A.
just ordered! thank you!
Not a ford fan but this was bad ass build @LeeC
Hey lee, do you happen to have a ls3 I could buy off a you for cheap I have a 95 Silverado my second project and I need an engine for it and what's better than a 5.7 a ls3 Soo lmk
Gladly welcome you to the mustang club, these cars are just fun to drive and enjoyable. Just do me a favor and watch out for the crowds 😂😂😂
Let's talk about how much we appreciate the ad free videos!
there's an ad 20mins into the vid wdym
Thank you adblock
@chadlustig I'm not talking about those, those I don't mind as much because they can easily be skipped past, I'm talking about the youtube sponsored ads. The ones you have to wait until you can skip them.
@@pat30185 ah gotcha
@@pat30185 your right....love it.....its NORMAL now in sad youtube 2024 ad filled nightmare world..!!! YAY....Thats A W...(INNER).!
Quick tip for you. If you hold the clutch in and put the gas pedal to the floor, the car goes into “clear flood mode”. This cuts the fuel system so you can turn it over without starting. It’s a good thing to use if you’re priming the motor as well. If you have an auto car you can mash the brake pedal and gas at the same time and it will do the same thing. Works on all ford vehicles at least since 2005ish from my experience. 20:54
Dont know about manuals but pretty sure you just have to push the gas pedal all the way woth no brakes. Also i think its for drive by wire vehicles only
@@hank1556 standards won’t crank unless the clutch pedal is all the way down. Ford went to DBW in 05/06 for the most part. It’s been a while since I did it on my 06 f 150 so it probably doesn’t need the brake pedal.
@@hank1556 Unless the manual has a no clutch start override for off-roading then I'd imagine the clutch is pushed with the fuel pedal to get the circuit closed from the clutch start safety
100% its the rear main seal, bad backfire will cause this. When you lost that intake cap when it blew off was the same time the rear main seal blew out. i will put money on it.
I think you’re right.
Always wanted to do this. With the insurance rates of a 6 cylinder car. That’s a BIG WIN LEE!
Ya bc saving $12 a month really adds up
And then they pay you out for a v6 car 💀💀
Don’t crash, hard ask in a mustang
@@danerasmussen6468depending on your age and a a couple other factors talking about going between 6 cylinder and 8 cylinder engine could be the difference of a couple hundred dollars a month m, which would add up to $1000s every year/ 6 months depending of your policy
The silver and red boss 302 got hit by a North Myrtle Beach police sergeant he was drunk driving we was there it happened at mustang week 2023 he hit it in a jeep the mustang was in mint condition till that
I’ve got a Silver Ingot Boss LS and seeing that wrecked LS made me sick! Did get some great parts that made your Hoss build though.
Sounds like police to me
The Hoss 302 lives on. It's a bummer, but you know it's all part of it. Hopefully not a cracked block, and just a rear main seal. Still awesome. Thanks Ray
Just bought a new to me 2012 GT/CS off a good friend of mine two days ago for dirt cheap because the Coyote has a rod knock. Thanks to this video and the first one done on this car, I know roughly what to expect and what upgrades to do while the engine is out. Thanks, Lee!
Nice pick up! Good luck!
@@LeeC I want to buy the Hoss!
Lee, love your channel and as a very long time supporter and as a 45 year collision shop owner/retired, I believe it’s time for you to invest in at least a used unibody frame bench and a measuring system which can be picked up used very reasonably. Yes, I can see just how talented you guys are with your forklift but your life and beloved projects. would be so much happier 😊
On a second watch I was thinking it is a good thing you changed over the dash/key/wiring… that way you keep the red key and the track tuning that ford made for the Boss 302.
I have a 13 Boss and a friend just bought a used 12. His didn’t come with the red key and we have to do a bunch of things to get a new one.
The red key is what makes the Boss a BOSS!
Also… not sure if the Laguna Secas shocks and struts survived… but you should use those in the Hoss… the LS did have different suspension than the regular Boss.
I regret I should have bought the LS suspension when I had a chance.
Lee said he has to swap over the entire electrical system…..I immediately think oh god, I’m praying for his sanity to stay intact ( hopefully it goes a lot smoother than the demon )
yes...
S197s are super easy though. Especially since there isnt much difference in the harnesses
Facts😂‼️😮💨
17:00 I know they're not soldered from the factory but it adds a nice little professional touch if you do it.
The videos this man makes are so fast paced I thought I was almost at the end of it, and it was going to be multi part. Nope, I’m only 15 minutes in.
fast paced but filled with all the important info. I love how he skips over the boring parts.
Yeah those boring parts that he skips are more important than what people think, you can’t just throw something together and half ass explain the build then expect people or viewers to fill in the blanks on challenges you had to overcome during the build.
@@justinw523 Yea cus he never shows the challenges he has to overcome...
Day 1 of me asking for a Manual Chrysler 300 hellcat build
I really enjoy this series because my mom had a boss and apparently loved driving it fast. She unfortunately passed when i was a very young kiddo but she lives on in my heart. Apparently she rolled her's 4 times 😆 I think she enjoyed it. One day man, one day imma get a boss to honor her.
i have a 2012 gt/cs that i’m building, this series definitely made me fall in love with the channel!
ScrapLifeLee you and your crew make cars remarkable.
Hoss 302 nice , I had a 1988 strawberry red mustang 5.0 5 speed back in the day , bought it brand new an had HOSS’ N placed on the windshield drove it for 3 yrs never had an issue then traded for a 1991 LX notch back crystal blue 5 speed an man I loved it , drove it 5 yrs an 230,000 miles an sold it of 5500 bucks in 96 an had few more fox bodys an now old an drive a f150 97 step side stx truck so hope y’all get oil leak fix cheap ❤the car man
Definitely worth the time and money.. I think it's AC negative you need to weld aluminum. Not all tig welders are for aluminum.
the little yellow connector on the passenger side is for the curtain airbags. It runs down the A pilar only on the passenger's side and connects right under the dash. I know this because I just changed the ac blend door actuator in my f150 and remember the same plug.
19:01 hearing those sounds make me feel like a proud 2012 mustang owner
“These things really like to yell at you” 😂 can’t stress it enough
💯 ❤ 💯 ❤ #Mustangs4life
nice hope oil leak is easy Like a goofy hose or something that's not hooked up for like an oil cooler.
Best of luck.
Bellissima ford mustang distrutta 😮😮😮❤❤❤🎉🎉🎉
It’s turning out beautiful 🤧
This is the first of your long videos I've really watched. I enjoyed it a lot. Sorry to see you've got an oil leak that's going to require some disassembly. Unless there is a block issue, I agree with your preliminary assessment of it being the rear main seal. I hope to see a followup video on it.
BUUUUUUURRRRR
I swear mustangs are the only ford vehicle they made this way, simple to work on and straight to the point.
Can’t wait for the 3rd installment on the Ho$$!!
Honestly I’d love to watch a whole “Chrysler 300 swap” series Low key. I’d loved to see y’all’s run on a track!
Always have been a big Mustang fan... It's so disheartening to see these beautiful cars totaled and wrecked like this!!!
Another great vids guys, love the format of not going on month after month…. great to just binge watch a few and go from start to finish! perfect 🍺👍
You have to admit Ford Engineering for the win on this one.
Amazed that you took 3 vehicles and made one bad ars Mustang! Stay with it and lets see it on the track!!
I’m a ford mechanic but don’t quote me on this but ford uses the same harness in different trim levels so that plug could be for a higher optioned mustang.
The best line of your video that made me laugh out loud was “ Lower their property value by dragging this bucket in their shop” freaking classic
This has been one of favorite builds! Good content!
Man, if i were more on-time to this video, I could have answered every single question. I converted my ‘14 V6 auto into a Boss 302 literally a year before.
Some gloss black skirts and mirrors would make it look so good, match all the nice black on it 💪🏼 just any of the bland black plastics, i did it to my BA falcon and it's literally nigĥt and day. So SO much better.
as another red/black ford owner, i love the build man.
Tech here, when you have brak fluid on anything, water works soooooo much better than just using brake clean. It's funny to say but I'm telling you it works.
I was wondering if you guys are gonna do a video on the new gt500 cftp on copart that just got added
Panel gaps are normal. My 2016 is gapped all to hell 😂. Good job ford. Just found this channel. Awesome stuff. Thanks.
I repaired one years ago easiest way to do this. Clip it from rear to front with florist and windshield posts and it came out beautiful rather than go through all that with this trying to repair things for Clips would be the deal. Trust me on that. Good luck with it Barry. 1:13
Some of the text came out wrong. It should’ve said floors all the way up underneath the dash.
All that hard work and at the end of the day it is still a Ford 😉 😉Except for that Battery terminal, that will outlast the car
Where did the red hood come from? 🤔
First time to channel. This is really great stuff. The kind of pacing i love in yt videos
What a huge change! Great looking car
Turned out to be a nice looking car.
Man... This looks and sounds amazing and drives amazing too
Yay no more nasty tuner content 🎉
I'm glad you fixed it ❤
I see a demon 170 engine in the back???? 3:50
Crazy amount of work, nice!
6:37. Reminds me of the spine scene in Predator.
Congratulations, you all did an awesome job with the boss 302. 👌👍
21:05 whatttt🤯
8:26 shifters a bit limp 😅😂
18:10 nahhh it was low key tryna jump scare you 💀
42:35 wait fr I though that was a stock feature 😂
That one plug may be for running lights behind the head light switch you push in turn it and it pulls out than you can plug it in now I may be wrong just had something similar happen with me
I’m just not a fan of red…just don’t make it look like Ed ‘s Bugatti 🤣
Pretty cool man, I would love to be able to take 2 or 3 cars and make one but that is a little out of my range to even attempt. Maybe one day. It was really cool to see this and the transformation.
Quickly becoming one of my go to channels.
6 minute club
I really appreciate your content!
MORE MUSTANG VIDEOS!!!!
Good video tattoos 👏
I WANT YOUR JOB❤❤❤
Iv been waiting all day
Right on time !!!!! LFG
Here in 2 minutes 😮❤
I love this channel ❤
You Gus are absolutely rocking this build. 😊
those wheels are fantastic
Love your videos
Finally dude
Hell yeah my brother
Guys guys!! You should've sectioned the cars and put them together.. right behind the shifter to retain all the necessary stuff to use the shifter and also have the proper vin for the boss 302 not to mention the entire wire harness.. would've saved you soon much time and headache... In my opinion anyway
You make great content … don’t change!!
I appreciate that!
Lee, you're one of the best! Keep up the good work!
That one connecter my be for your head light and running light selector you push it in turn it and pull it out and plug the plug in
You the best bro
I stumbled upon your channel from my recommendations and truly appreciate your channel for 7 months now.... awesome channel
Add a procharger
That ngauge is a turning jewel hopefully it's a Lund ngauge and is still supported and probably the best coyote tuner if it's HP well you're shit out of luck and it's unsupported. That ngauge holds the performance and stock tune but also shows you every sensor and run diagnostic plus data logging for future tunes.
I saw a similar prob on a focus changing a trans 2 large connectors witch were identical plugs side by side were plugged incorrectly dame ford
You have the dream job Lee..
I have a 2013 pw boss 302 and this was a cool series enjoyed the content
12:33 Please for the love of God, remove those damned vampire taps and repair the wire to prevent corrosion, and electrical gremlins. Those things are terrible.
Man I love these videos always worth the wait
Yes!!!!
Guessing the H pipe tapers down due to the side pipes. Wonder if widening might create too much negative pressure for the side pipes to function properly, or even for the setup in general
finally, I've been waiting for this video
Love the hoss bro
3:48 what demon 170 engine
I saw that too I think he got it from this stripped dodge demon 170 in copart
You found a way to make a mustang somewhat interesting. I'm here for the ho$$
I just wanted to give you guys a heads up. There's this new invention called gloves ! You're going to find it really helpful when it comes to handling glass 😅
Great swaps all the time…👍🏻👍🏻👍🏻…😎
Love it I'm not a big ford person but I like what u all r doing
8:29 every guy when he wakes up in the morning
The car looks the nuts