good guide but the problem is really making the "little" details on the gun after you modeled it to make it look as realistic as possible. in that gun model because its low poly you cant see much but in actual real images of guns side view the little bumps on the gun. the writings of the model etc. are very hard to make.
Those would be normally done through normal maps, which are actually fairly easy, especially using programs like substance painter. I do agree though, would've been nice to see the method of making holes etc.
if you are going to use this workflow make sure to connect vertices so that you dont have n-gons (faces that have more than 4 sides) since most programs including blender will run into bugs and glitches if you do.
this is nice for beginners, BUT don't get use to this workflow, there's some bad practice involved mainly bad topology. It's good practice to avoid n-gons (faces with more than 4 vertices) and best practice to only have quads (faces with 4 vertices), occasional tris (face with 3 vertices) is okay too.
Amazing... this tutorial teaches so much about blender and the shortcuts and I can make different types of guns with the same process... (Thank you very much)!
The tutorial is very intuitive but im having an issue with the boolean modifier part. It says i cannot use it in edit mode and even if i switch to object mode the apply button will work, but nothing happens.
Don't know if you still need help but you can try applying scale to the objects by pressing "ctrl+a" and then apply scale option. That is usually problem of booleans working incorectly. Other problem could be geometry but if you followed tutorial it should be OK.
@@StarGriii I'm having this issue and none of the suggestions are working. I separated it, applied the modifier to the larger piece, clicked on the smaller piece as the object with all of the parameters, and nothing. I followed the tutorial practically frame by frame and it's not working. I also searched for other solutions and can't find one that works. When I apply the boolean to the smaller-trigger piece I can see it remove the inside portion as it should. But it refuses to work on the middle barrel portion and in the way as shown in the video. If you have any other suggestions that would be awesome. I tried using bool tools too and I couldn't get it to work. www.youtube.com/@justanaverageviewer8142 , did you ever find a solution?
how do i make custom vertices that dont parent to anything. every time i copy one of the points and make a custom shape, it makes it a child of whatever i copied it from. how do i stop this
I like it but it feels a little "rapid fire" when I'm truing to follow along I get lost trying to figure out which key to press. (I'm a full on beginner)
just slow down or replay parts. I hate always having to watch tutorial vids on 2x speed. This guy just does it and if you don't understand what it is he is doing go google it. Most efficient method of learning.
Search in other video, like “how to make a good texturing in blender”. He didn’t add it here bc texturing is even way harder than just making a model ( for my friend sword blocking took 20-30 mins and the whole texturing 3 hours, bc of things like UV unwrap. That’s actually even with photoshop ).
For texturing you'd need to UV unwrap the object and export fbx and import into a software like substance painter or mudbox. You can add materials to select faces however that is bad practice because it wastes texture space for one object
I already know how to model for my video games, but this guy right here got a better approach.
Imagine if he forgot to type in “| blender” into the title
you can find that online as well
are you seriouse?@@BusinessWolf1
yea @@Green_Monster-ni2ru
@@BusinessWolf1yeah its pretty easy to do
😂
good guide but the problem is really making the "little" details on the gun after you modeled it to make it look as realistic as possible. in that gun model because its low poly you cant see much but in actual real images of guns side view the little bumps on the gun. the writings of the model etc. are very hard to make.
Those would be normally done through normal maps, which are actually fairly easy, especially using programs like substance painter. I do agree though, would've been nice to see the method of making holes etc.
GOAT!!!!! This video singlehandedly taught me all the keybinds/shortcuts I'll ever need.
yeah me too
Way too fast man. Its like a how to for people who don't need a how to.
Its not a step by step it just shows you what to do when making a gun
@@edvino1230 Least helpful comment?
Yes, it's the "thing that the bullets come out from".
fun fact: the "thing" that he mentioned is not where it comes from. he mentioned the muzzle, the actual bullet goes into and comes from the chamber
if you are going to use this workflow make sure to connect vertices so that you dont have n-gons (faces that have more than 4 sides) since most programs including blender will run into bugs and glitches if you do.
this is nice for beginners, BUT don't get use to this workflow, there's some bad practice involved mainly bad topology. It's good practice to avoid n-gons (faces with more than 4 vertices) and best practice to only have quads (faces with 4 vertices), occasional tris (face with 3 vertices) is okay too.
NO WAY BRO MAKES THIS JUST LIKE OUTLINING A PICTURE
This would be so perfect is you like edited in the controls you're doing.
Amazing... this tutorial teaches so much about blender and the shortcuts and I can make different types of guns with the same process... (Thank you very much)!
Im trying to model a browning 50 cal for a zombie game and yours has helped A LOT
Your tutorial is amazing!
Ty for the tut
me as beginner blender maker when watching the video into 1 minute be like:what is this sorcery?
when I import it on roblox studio it says "one of the dimensions of the object is bigger than what can be imported" do you know how to fix this ?
looks nice thx for the video
The tutorial is very intuitive but im having an issue with the boolean modifier part. It says i cannot use it in edit mode and even if i switch to object mode the apply button will work, but nothing happens.
Don't know if you still need help but you can try applying scale to the objects by pressing "ctrl+a" and then apply scale option. That is usually problem of booleans working incorectly. Other problem could be geometry but if you followed tutorial it should be OK.
you have to select the part you want to make a hole with and separate it then go to object mode and apply the modifier
@@StarGriii I'm having this issue and none of the suggestions are working. I separated it, applied the modifier to the larger piece, clicked on the smaller piece as the object with all of the parameters, and nothing. I followed the tutorial practically frame by frame and it's not working. I also searched for other solutions and can't find one that works. When I apply the boolean to the smaller-trigger piece I can see it remove the inside portion as it should. But it refuses to work on the middle barrel portion and in the way as shown in the video. If you have any other suggestions that would be awesome. I tried using bool tools too and I couldn't get it to work. www.youtube.com/@justanaverageviewer8142
, did you ever find a solution?
Looks cool but I don't understand exactly what you do with your when you loop cut and bevel. I follow your inputs but its not the same.
BROTHER THOSE KEYBIND IN THe BOTTOM CORNER ARE SO LAGGY
how do i make custom vertices that dont parent to anything. every time i copy one of the points and make a custom shape, it makes it a child of whatever i copied it from. how do i stop this
I like it but it feels a little "rapid fire" when I'm truing to follow along I get lost trying to figure out which key to press. (I'm a full on beginner)
just slow down or replay parts. I hate always having to watch tutorial vids on 2x speed. This guy just does it and if you don't understand what it is he is doing go google it. Most efficient method of learning.
i still dont get it bruv i think im kinda dumb
YOOOO THANK YOU SO MUCH, YOUR OUTLINING TECHNIQUE IS THE BEST, I MADE A NICE GLOCK 17 WITH IT
When i press ctrl + d it only duplicates the end of it.(its really hard im making an m4a1)
it's shift + D
@@spz_mikalash When i do shit D it just duplicates the end can you help me please ? Been trying stuff for an hour now cant find the solution.
Anyone know what hr means by "control b v?
Wait a sec, Was bro playing roblox in the background? 💀💀☠☠
yes and no, also theres no problem with it
@@stomplolof course you say that 💀
why i cant make this hole
how did you make the sight
nice tutorial, thank you!
nice tutorial
the normals part wont show up
how do you manage to sound english and american at the same time
Man i am so bad at modeling i mean i just started but i don't get how you know all of the buttons to scale and stuff.
Superb! Well done.
how is every tutorial so hard for me i quit blender
s am e
Cuz y'all don't know who blender guru is
How to make that top aiming part
11:55 S+Z olmasın S x ne alaka? kafamı çok karıştırdın bu videoda
s+z means it scales on the Z axis, same with s +x and s +y
Thank you!
"Here we go"
bruh so bad tutorial
1. How on 7:10 you have this button i dont have this button
2. if you click or hold E plane making correctly
That's just a personal issue
PLEASE SLOW DOWN
i cant select the faces
U gotta choose the faces
Is this gun copyright and can you give the link to download? Please 😢
there isnt copyright on this, its a picture....... also its a HOW TO DIY
@@mcpraven ok
Bro the model on the thumbnail is literally guns I wanna make.
Am having issue with boolean modifier. Deleting the object noit creating the hole for trigger. Can anyone help me?
For me it says operation not allowed in edit mode
same problem
@@justanaverageviewer8142 do it in object mode
Same
Am I the Only one that is confused at 8:20
Same here
JUST A LITTLE BIT
"the thing the bullets come out from" 💀💀
bruh its a barrel
great vid tho
How to add the textures ?
Search in other video, like “how to make a good texturing in blender”. He didn’t add it here bc texturing is even way harder than just making a model ( for my friend sword blocking took 20-30 mins and the whole texturing 3 hours, bc of things like UV unwrap. That’s actually even with photoshop ).
For texturing you'd need to UV unwrap the object and export fbx and import into a software like substance painter or mudbox. You can add materials to select faces however that is bad practice because it wastes texture space for one object
I found the same reference image😂
am stuck on 1:50 how did you make that thing smaller when i tried doing that it just copied a line and nothing else
You have troubles with extruding inside or with doubling lines?
@@Milkguy33 no sorry i found out how to do it
@@officialmadara k.
Texturing?
for paint how to use?
And here I was thinking it was hard. Phew...
Could you PLEASE!! leave your reference image in the descripcion box! pleaseeee
It's on Google. Search stylized gun
wdym shift bruh
this shift key on your kb
I am stuck with mussel
PLEASE MAKE A LOW POLY GUN PLEASEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
idk if you left enough comments
horrible tutorial moving to fast, not for begginers
bro doesnt explain shit
bruh blender is so bad
u just suck
its easy once you get used to it
I HATE BLENDER RAHHHH
model is faked
nope :)
PLEASE MAKE A LOW POLY GUN PLEASEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
idk if you left enough comments
PLEASE MAKE A LOW POLY GUN PLEASEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
idk if you left enough comments
PLEASE MAKE A LOW POLY GUN PLEASEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
idk if you left enough comments
PLEASE MAKE A LOW POLY GUN PLEASEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
idk if you left enough comments
PLEASE MAKE A LOW POLY GUN PLEASEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
idk if you left enough comments
PLEASE MAKE A LOW POLY GUN PLEASEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
idk if you left enough comments
PLEASE MAKE A LOW POLY GUN PLEASEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
bruh that IS low poly