There's a lot of lack of knowledge about studio one i noticed on some of the comments i was having many questions at one point i had to stop doing this dream of recording my own songs for about a year with a lot a frustration but i found this great tutorials from HRME and now I'm recording a lot songs and other musicians are asking me if i made all my music out of studio one (effects , eq comp, etc) studio one is a real professional daw ..
Thank you making this tutorial. I am on Studio 3.5 Artist . I had thought about upgrading but the bottom line is making a song. Too many beginners upgrade before mastering the basics. Thank you.
Such a good video, and thanks for being so thorough. You sounded great! I'm a synthpop artist, dropped everything to play guitar for 8 years and now I'm ready to record electric into my Studio One DAW. This video has been incredibly helpful. I'll check out your bass video too. Thanks again!
Thanks for the very helpful video. Studio One is rich and sophisticated program with so many features. Getting around in the program can be quite challenging. Your explanations are clear and to the point. Really appreciate it
Great video ... and thank you for making such a good substantive video ... clear ... concise ... and not so long like many other channels ... the great thing about this type of instructional video is that "any" person could easily understand the lesson to make music .... thank you again ... great work!!
Hello. this video is great but at the same time confused me. The end cable plugged in the guitar obviously is a instrument cable TRS, but I see the end of the cable plugged in the Input 1 of the interface is a XLR Canon cable?? Do you have a D/I in the floor? or the cable is one end TRS and the other end XLR?
I just plugged my regular 1/4" guitar plug into Mic/Instr (Ch 2) on my Quantum 2626 and it worked. Like others, I was worried that there'd be a problem because Ch1 has a Mic connected that uses 48V Phantom power and, on the 2626, a switch turns phantom power on for Ch1,2,3,4 all together. I've now read (and confirmed) that a 1/4" plug plugged into the combination XLR/1/4" connectors does NOT see the 48V out and does NOT affect the guitar input signal in any way.
hi, Can you please help me with ampire issue. I cant hear the ampire effect while playing guitar. I hear only plain sound without any effect. What may be the reason ? Take care
And what about studio one doesn´t recognize that you plucked in a guitar. I have this problem. I have connected it with a normal 6,33mm klinke cable with my focusrite solo. Do i have to use an xlr cable to play it in my daw or what do i have to do ? Thanks for any help
I've tried using the amps in the app... Just not for me especially when I am looking for a sound that match the B tuning for a really heavy tone... So I think I will just use a mic to amp for the sound that I already have. Thanx for the tips though.
I have a guitar plugged into input 1 on the front of the audio box and the main going out to a speaker. I followed this but don't hear the effect of the ampire that I dragged over into my inserts as shown
You need this gear: two XLR cables, two guitar (1/4” TS) cables, and a simple DI box ($40 at Sweetwater). Plus an amp and a mic. Plug your guitar into the DI in. Run a second 1/4” TS cable from the DI pass-through to your amp. Run an XLR cable from the back of the DI box into one of the AudioBox inputs. Mic your guitar amp; plug the mic’s XLR cable into the AudioBox’s second input. You now have two tracks: a live mic’d amp and an all-in-the-box full-digital signal. Or maybe I misunderstood you. Did you want to mic your guitar amp or a vocal?
thx much but please help :) > i added Ampire but guitar has no effects. what exactly do i do after i drag Ampire into middle of my screen next to my inputs? do you have another video to detail this?
Please Help!!!! im using studio one 6 as my DAW, I just bought a presonus audiobox USB interface and connected it as the how to's said. I'm not getting a signal from the guitar at all but i am on the interface. Ive tried both input 1 and 2 just to see if one was maybe broken but the clip light is working when the guitar is connected to the interface
I don't know what i am doing wrong: i was recording okay, then at some point (must have changed something) the volume of the recording became very low, and now i can see the signal on the track being recorded but i don't hear anything. I was digging the settings, changing stuff, played with knobs and - nada. Any hints...? Thanks.
My input meter is dark instead of blue, any idea why?also, when i use any of the inputs in the front (I have the1824c) the signal starts to distortion and glitch after I play for a couple of minutes until it´s inaudible, already updated the firmware on the universal control and tried all the latency set ups and nothing works. Any help would be appreciated .
For some reason, my output says stereo w no other options. I can hear my guitar, but when recording there are no waves showing up. Does anyone have a possible solution?
Getting latency. the bufferdevice block size at 32. i even went to 16. stil getting latency. on imac 2020 6 core. studio one 6. is there a feature to get low latency.
Using Studio 4.6 and cannot expand the inserts. I'm able to drag the Ampire interface, but had to adapt a little. Also, my rhythm track is fine, but I made a lead track and can't get the volume right.
Hmm..so..the guitar is plugged in and your using headphones to hear the guitar and drums. When you playback the track with drums..is what you are hearing coming thru on the headphones..or do you have to switch settings to hear the tracks come out to the monitors? I'd like to record at night, with headphones on and then listen to what I recorded on my monitors during the day. I guess my question is..when you record-is it with headphones only? Thanks. very informative for this noobie.
Hey sir thanks that it was extremely helpful, I used have cakewalk sonar started having some issues with the drum loops and whatnot after a while I got discouraged watching this video it kind of made me want to try out this studio one DAW it looks that it's got more features and is more friendly user controls, great video !! 👍👍👍😎😎
Got my guitar running through an eleven rack into studio one. Sounds fine when playing and recording, but sounds like crap (like the treble is turned to 47 out of 10) once I export it to, well, anything. Tried a variety of settings in the export screen, highly doubt the problem is there. Any other ideas?
I have recently recorded 4 tracks (3 guitar + 1 bass) everything went fine, no to little latency at all. Then I started recording the guitar solo, also it sounds great and on time when I play and record. However now when I listen to what I recorded it's like one bar to late in relation to the other tracks. It doesn't matter what I do it keeps getting delayed somewhere in the recording process so the end result turns out bad. I use the old Studio One 2 program from 2014. I have recorded other songs with none of these problems, so it's strange it kind of came out of nowhere. BR and great content!
I'm new to all this. I bought audiobox usb 96 to play online on jamkazam (blues electric guitar). wasn't really interested in the recording part. but i decided to explore it. These tutorials are just fantastic. Great content, well explained, in small chunks. Well done!!
I’m having too much guitar tones come in the mix vs the ampire tones I set. There isn’t a dry knob on the amps. How can I dial down the guitar sound without messing up my ampire setting?
Great job on this detailed walk through. Thanks!!! I can record and hear my guitar (clear) but my sound doesn't change a bit by using different ampire presets (sound settings, amps etc and even the "Red light dist" ). I was so sure to have installed everything right like your previous videos... Since 3 days too desperate
I just purchased the Presonus AR8 USB (it's not the newest model the usb-c but it was cheaper as last year's model). I downloaded the Studio One that came with it. Anyway do you know why the Ampire will drag over to a track and it will open, but there are no presets in there and nothing really seems to work with it? So you know why this would be?
Coulda used you a few years ago, but you are helping rt now with everything...I could have used this last night in arranging..had to go old school, but now I have these vids saved for future reference..Good teaching style...I've read the manual a lot,but it is mostly a bit vague..
Can you do a lesson on how to import drum and bass tracks? I plan to use a VST like EZ Drummer to build drum tracks around my recorded guitar riffs and also to either record bass tracks or import bass riffs.
My ampire only has default options for cabinets and presets. It also has no gain knob???? Basically I can only record super distorted guitar which sucks because I am a jazz player.... anyone know to solve this problem?
Got a nice Studio 24c recently, recording using a Audio-Technica Athm20x as my tracking hesdphones. For some reason, the guitar picks up the sound coming from my headphones. When I unplug the headphones to record, this doesn't happen. Anyone has any idea of what's going on?
Do you have to monitor through Studio One when you're recording? This works great when you only have a couple of tracks, but otherwise I'm getting a lot of latency. I've tried a bunch of buffer settings, dropout settings etc. I notice you have an Apollo interface in the background. I mix/monitor through one of those, but I can't record using an amp sim unless I monitor through Studio One and the latency makes it impossible to play. What do I do? Thx.
Hi, i just cant fix the latency with the presonus..tried overall latency reduction to zero, 64 buffer, delay on the track, probably everythin...what do you suggest to do? its so annoying when recording vocals to listen latency...
Hello I tried this but when I open Ampire I haven't got any guitar effect I have only default guitar. And I also can't start playing my guitar I don't know why. Can it be problem becouse I have usb microphone wich is not plugged in my interface ?
thanks for your video, is there a way to give time before starting to record, start recording immediately and do not have time to prepare. something like 3, 2, 1, go.-..-
Help!!! An old cool edit to Adobe Audition user for years. I'm a guitar player and use studio one 5 for record and picking out guitar parts buy stretching and going to certain area's in the track but hard to navigate. Any help out there to highlight tra quickly.
In terms of sonic qualities, how important would you say is, how high the gain level is set on audio input? Is it better if you can turn it up more before clipping (better sonic qualities) or is it just a "knob" that is giving you pretty much the same audio quality across all levels no matter how much you turn it up. The reason I'm asking is because my Scarlett solo gain turns up to around 1/4 before it starts clipping. I'm wondering If I am loosing something of my sound quality because I don't use guitar with less powered pickups that would allow Scarlett to open up its input gain more. I hope this makes sense, English is my second language. Thanks. Great video btw.
So I want to use condensor mic and guitar on my 1810c. Do I need to connect the guitar to the line inputs on the back? Sadly there's no way to only turn on phantom power for some of the pres it's all or none.
The problem with this by the way is I can't easily adjust the knob from the front... this is pushing me towards the focusrite which has instrument mode, and separate phantom power circuits.
@@michaelpal7641 Block size is basically the delay time (in samples) between input and output. Lower = less delay/latency, but increases CPU usage (which can distort the audio if it's too demanding of the CPU).
Great video, I'm deciding between this interface, the Focusrite 2i2 3rd gen and the Audient 4. But this one has a great plus which is the VST software. Can it be used in Ableton?
Hi there, thank u for sharing the tutorial..anyway can you help me to advise setting studio one for recording using real amp and effect, so I don't need to put plug- ins, so I can get my own real amp and pedal sound precisely... Thank u and have a good day..
Hey, I have a question, when I use a guitar and try to record I can hear the guitar before I activate the plugin but when I do I can barely hear the effect. Just some hum along with the low guitar sound. I hear some very low distortion no matter the gain settings and no matter which amp but, when I turn it up it's peaking like crazy, so when I adjust the levels and try to record I really don't hear the effect while playing. I'm trying to figure out what the issue is?! Going thru Audio Box USB96. 3 different guitars and it occurs when I try and record with the Bass also! Studio One 5 Artist? Suggestions?
When engaging a high gain head, I still can listen to a clear guitar tone at the same time I listen to the high gain tone(as soon as I plug my guitar I can listen to it even if I'm not pressing the speaker button)
Been using studio one for a little while now and run into a problem whilst recording my guitar. I’m using an electric directly plugged into my Studio24C interface and somehow it’s picking up other signals. I’m wearing headphones, have the input dial at 0 and my guitar volume at 0 yet I can faintly hear my drum track playing in the recording. Has anyone else had this problem and know how to fix it?
The only thing I am missing that you did not mention all these things are for the professional version these presets are not in artist version at least my 6.5 artist preset list is blank
I'm getting some intermittent crackling and noise when using Ampire plug-ins etc. If I use no 'stomp box effects' plug ins etc i.e. clean guitar, it's clear. Does anyone know where the crackling is coming from?
I am having an issue with playback on my studio monitors. I am only hearing my guitar through my headphones as well as the recorded playback. How can I get my playback through my monitors but my live feed through my headphones??!?! Anyone with help on this would be greatly appreciated!
Only able to hear empire, with effects, On stereo mode. Once I switch mono My tone immediately switches back to a clean sound. Does anyone know what’s going on? Thank you
David. I bought a CLA Wave Guitar Plugin and am using it with Studio One Artist that came with my AudioBox by Presonus. I'm not impressed with the sounds it makes but I liaised with CLA and they said 'Artist' won't hold it, and that I'd have to go for Professional which is a hell of a lot more money! Any insights or support most welcome. Thanks.
Nah. You can check this yourself if you have a meter. But phantom power only gets applied to balanced (xlr) lines. It doesn't get applied to 1/4" lines because there just literally is no connection for it.
I was thinking that the interfaces like this shouldn't take a hi-z guitar input directly in because it's a mic-preamp. Shouldn't we be going through a DI box to drop the signal to a mic level? I see you're going in with an XLR cable, but you seemed to suggest you plug guitar right in? #confused
Good video. Question, if you want a Mic and Guitar recording at once (so using 2 inputs) , and you need phantom power for Mic, I guess, this is not possible?
Thank you for the tutorial! Very helpful! A little problem though..When I'm playing my guitar and recording, I can completely hear the sound from my headphones L and R. But when I playback the recorded track, I can only hear it from R side. Did I miss a step somewhere in the settings?
How do you lower latency/lag during playback? Been wondering this. I don’t have the Presonus Audiobox I have the Scarlett 2i2 but ice read that you’re supposed to do lower the sample rate in daw and/or interface software. Any advice I’d really appreciate it!
Not sample rate, you want to lower the buffer size. That's the "Device Block" setting in Studio One, as well as the "dropout protection" setting. The lower you set them, the lower the latency. - Joe Gilder
When I record a guitar and I made a mistake in the middle and I want just to fix a small part of it, when I click in record the sound that I have recorded its muted, but I like to listen to it, is possible to do it?
Honestly the first minute of this video gave me way more questions than it did answers. I bought a Studio 24c and I didn't realize I needed an amp plugin, nor that I needed to plug my headphones into IT, not my computer, and since my headphone jack doesn't fit anywhere, I feel kinda screwed. Also, what kinda amp plugins are there that come with the Studio 24c? cuz I don't see the ampire in there at all. I just want to be able to hear my guitar on my computer man!
Using the Audio Box 2 on a PC with 6 gig of RAM, I have yet to find a way to play with the monitor that does not produce a ton of latency, creating a slap echo in the phones and making the track out of sync with the tracks being played back. Did you go over the settings for getting zero latency?
latency has some to do with RAM but mostly with CPU processing power. If you open Universal Control with Studio One closed you can set the appropriate Block size to monitor while playing. If you set the block size super low, say 32 samples, it'll be processing the sound in near real time, but unless you have a powerful CPU, you will not get any sound at all. The higher the Block size say 4096, will give more time for your CPU to process the sound, but you will hear an audible latency when monitoring. The key is to set the Block size to a point in which latency is a non issue, and your computer can handle it. If you have a CORE i5 processor that may be in the 128 to 256 Block size range. Once you're done recording, save your session, and change the block size to something much higher so that you can work on your track and not kill your CPU. Also, close all other apps whilst recording.
There's a lot of lack of knowledge about studio one i noticed on some of the comments i was having many questions at one point i had to stop doing this dream of recording my own songs for about a year with a lot a frustration but i found this great tutorials from HRME and now I'm recording a lot songs and other musicians are asking me if i made all my music out of studio one (effects , eq comp, etc) studio one is a real professional daw ..
A heartfelt "Thanks!" from a new user of Studio One! Your videos are the answer to a prayer!
Thank you making this tutorial. I am on Studio 3.5 Artist . I had thought about upgrading but the bottom line is making a song. Too many beginners upgrade before mastering the basics. Thank you.
You have the gift of teaching. Thank you!
Such a good video, and thanks for being so thorough. You sounded great! I'm a synthpop artist, dropped everything to play guitar for 8 years and now I'm ready to record electric into my Studio One DAW. This video has been incredibly helpful. I'll check out your bass video too. Thanks again!
Excellent instructions and just what I needed to get started recording my guitar tracks. Thank you.
is there a video showing how to record using external amps, like tube amps?
Thanks for the very helpful video. Studio One is rich and sophisticated program with so many features. Getting around in the program can be quite challenging. Your explanations are clear and to the point. Really appreciate it
Great video ... and thank you for making such a good substantive video ... clear ... concise ... and not so long like many other channels ... the great thing about this type of instructional video is that "any" person could easily understand the lesson to make music .... thank you again ... great work!!
Loved your tutorial! My Presonus 24c just arrived and you video just made me play awesomely in just a few hours! Thank you
Crystal clear tutorial, wonderfully explained.
I second that.
Hello. this video is great but at the same time confused me. The end cable plugged in the guitar obviously is a instrument cable TRS, but I see the end of the cable plugged in the Input 1 of the interface is a XLR Canon cable?? Do you have a D/I in the floor? or the cable is one end TRS and the other end XLR?
I was thinking exactly the same...
Pretty sure he's using a TRS to XLR adapter?
ALBERTO GARCIA The interface inputs allow either XLR and TRS to be used in the same input.
@@StephenFosterUK Yeah, he should have spoken to that, TRS to TRS capable. But a GREAT course for a noob!
I just plugged my regular 1/4" guitar plug into Mic/Instr (Ch 2) on my Quantum 2626 and it worked. Like others, I was worried that there'd be a problem because Ch1 has a Mic connected that uses 48V Phantom power and, on the 2626, a switch turns phantom power on for Ch1,2,3,4 all together. I've now read (and confirmed) that a 1/4" plug plugged into the combination XLR/1/4" connectors does NOT see the 48V out and does NOT affect the guitar input signal in any way.
hi, Can you please help me with ampire issue.
I cant hear the ampire effect while playing guitar. I hear only plain sound without any effect.
What may be the reason ?
Take care
great video, a help, if I don't want to play with headphones, only using my monitors, how should be the Mixer knob configuration?
And what about studio one doesn´t recognize that you plucked in a guitar. I have this problem. I have connected it with a normal 6,33mm klinke cable with my focusrite solo. Do i have to use an xlr cable to play it in my daw or what do i have to do ? Thanks for any help
I've tried using the amps in the app... Just not for me especially when I am looking for a sound that match the B tuning for a really heavy tone... So I think I will just use a mic to amp for the sound that I already have. Thanx for the tips though.
I have a guitar plugged into input 1 on the front of the audio box and the main going out to a speaker. I followed this but don't hear the effect of the ampire that I dragged over into my inserts as shown
what if id like to record at the same time with an electric guitar and a condenser mic?
You need this gear: two XLR cables, two guitar (1/4” TS) cables, and a simple DI box ($40 at Sweetwater). Plus an amp and a mic.
Plug your guitar into the DI in. Run a second 1/4” TS cable from the DI pass-through to your amp. Run an XLR cable from the back of the DI box into one of the AudioBox inputs. Mic your guitar amp; plug the mic’s XLR cable into the AudioBox’s second input. You now have two tracks: a live mic’d amp and an all-in-the-box full-digital signal.
Or maybe I misunderstood you. Did you want to mic your guitar amp or a vocal?
thx much but please help :) > i added Ampire but guitar has no effects. what exactly do i do after i drag Ampire into middle of my screen next to my inputs? do you have another video to detail this?
What happens if you got no presets on empire ?
Thank you for the introduction video. Is there a way to set up the Audio Box USB 96 Studio for video conferencing?
Please Help!!!! im using studio one 6 as my DAW, I just bought a presonus audiobox USB interface and connected it as the how to's said. I'm not getting a signal from the guitar at all but i am on the interface. Ive tried both input 1 and 2 just to see if one was maybe broken but the clip light is working when the guitar is connected to the interface
I don't know what i am doing wrong: i was recording okay, then at some point (must have changed something) the volume of the recording became very low, and now i can see the signal on the track being recorded but i don't hear anything. I was digging the settings, changing stuff, played with knobs and - nada. Any hints...? Thanks.
My input meter is dark instead of blue, any idea why?also, when i use any of the inputs in the front (I have the1824c) the signal starts to distortion and glitch after I play for a couple of minutes until it´s inaudible, already updated the firmware on the universal control and tried all the latency set ups and nothing works. Any help would be appreciated .
For some reason, my output says stereo w no other options. I can hear my guitar, but when recording there are no waves showing up. Does anyone have a possible solution?
Justin Esmer I’m having the same problem with my organ. The sound is beautiful but no waves
Hey there. Under default I have no amp choices. Is it because I have Artist and not Pro again?
An excellent video to learn the fundamentals on recording an instrument in Studio One. Thanks.
Getting latency. the bufferdevice block size at 32. i even went to 16. stil getting latency. on imac 2020 6 core. studio one 6. is there a feature to get low latency.
Using Studio 4.6 and cannot expand the inserts. I'm able to drag the Ampire interface, but had to adapt a little. Also, my rhythm track is fine, but I made a lead track and can't get the volume right.
Hmm..so..the guitar is plugged in and your using headphones to hear the guitar and drums.
When you playback the track with drums..is what you are hearing coming thru on the headphones..or do you have to switch settings to hear the tracks come out to the monitors?
I'd like to record at night, with headphones on and then listen to what I recorded on my monitors during the day. I guess my question is..when you record-is it with headphones only? Thanks. very informative for this noobie.
Hey sir thanks that it was extremely helpful, I used have cakewalk sonar started having some issues with the drum loops and whatnot after a while I got discouraged watching this video it kind of made me want to try out this studio one DAW it looks that it's got more features and is more friendly user controls, great video !! 👍👍👍😎😎
Got my guitar running through an eleven rack into studio one. Sounds fine when playing and recording, but sounds like crap (like the treble is turned to 47 out of 10) once I export it to, well, anything. Tried a variety of settings in the export screen, highly doubt the problem is there.
Any other ideas?
How do you do put the drums like that ? With the intro/verse/chrous and outro names
Your studio is such a vibe
I have recently recorded 4 tracks (3 guitar + 1 bass) everything went fine, no to little latency at all. Then I started recording the guitar solo, also it sounds great and on time when I play and record. However now when I listen to what I recorded it's like one bar to late in relation to the other tracks. It doesn't matter what I do it keeps getting delayed somewhere in the recording process so the end result turns out bad. I use the old Studio One 2 program from 2014. I have recorded other songs with none of these problems, so it's strange it kind of came out of nowhere.
BR and great content!
update your software lol
I'm new to all this. I bought audiobox usb 96 to play online on jamkazam (blues electric guitar). wasn't really interested in the recording part. but i decided to explore it. These tutorials are just fantastic. Great content, well explained, in small chunks. Well done!!
I wish I had teachers like yu in grade school,yu have a gift🙏🏾❤
The word is spelled "you".
@@dirtpipedan ty ass pipe, ty-thank yu
I’m having too much guitar tones come in the mix vs the ampire tones I set. There isn’t a dry knob on the amps. How can I dial down the guitar sound without messing up my ampire setting?
Great job on this detailed walk through. Thanks!!!
I can record and hear my guitar (clear) but my sound doesn't change a bit by using different ampire presets (sound settings, amps etc and even the "Red light dist" ). I was so sure to have installed everything right like your previous videos...
Since 3 days too desperate
same here . someone help ?
I just purchased the Presonus AR8 USB (it's not the newest model the usb-c but it was cheaper as last year's model). I downloaded the Studio One that came with it. Anyway do you know why the Ampire will drag over to a track and it will open, but there are no presets in there and nothing really seems to work with it? So you know why this would be?
I keep running into the issue of I can hear my guitar through my headphones but when I press record it doesn't register any sound.
The version of ampire shown in this video is not available in the free version of studio one that comes with the audio interface, sadly.
Coulda used you a few years ago, but you are helping rt now with everything...I could have used this last night in arranging..had to go old school, but now I have these vids saved for future reference..Good teaching style...I've read the manual a lot,but it is mostly a bit vague..
Can you do a lesson on how to import drum and bass tracks? I plan to use a VST like EZ Drummer to build drum tracks around my recorded guitar riffs and also to either record bass tracks or import bass riffs.
I can't get sound through ampire I can only play something clean then add the effect what am I doing wrong?
My ampire only has default options for cabinets and presets. It also has no gain knob???? Basically I can only record super distorted guitar which sucks because I am a jazz player.... anyone know to solve this problem?
Got a nice Studio 24c recently, recording using a Audio-Technica Athm20x as my tracking hesdphones.
For some reason, the guitar picks up the sound coming from my headphones. When I unplug the headphones to record, this doesn't happen. Anyone has any idea of what's going on?
Do you have to monitor through Studio One when you're recording? This works great when you only have a couple of tracks, but otherwise I'm getting a lot of latency. I've tried a bunch of buffer settings, dropout settings etc. I notice you have an Apollo interface in the background. I mix/monitor through one of those, but I can't record using an amp sim unless I monitor through Studio One and the latency makes it impossible to play. What do I do? Thx.
Hi, i just cant fix the latency with the presonus..tried overall latency reduction to zero, 64 buffer, delay on the track, probably everythin...what do you suggest to do? its so annoying when recording vocals to listen latency...
Hello I tried this but when I open Ampire I haven't got any guitar effect I have only default guitar. And I also can't start playing my guitar I don't know why. Can it be problem becouse I have usb microphone wich is not plugged in my interface ?
Thank you from a still struggling new Studio One user. Very informative and helpful.
After 4 months of a subscription to this software, I still don't know what I'm doing and am convinced this is $15/month I could be wasting elsewhere.
thanks for your video, is there a way to give time before starting to record, start recording immediately and do not have time to prepare. something like 3, 2, 1, go.-..-
Help!!! An old cool edit to Adobe Audition user for years. I'm a guitar player and use studio one 5 for record and picking out guitar parts buy stretching and going to certain area's in the track but hard to navigate. Any help out there to highlight tra quickly.
In terms of sonic qualities, how important would you say is, how high the gain level is set on audio input? Is it better if you can turn it up more before clipping (better sonic qualities) or is it just a "knob" that is giving you pretty much the same audio quality across all levels no matter how much you turn it up. The reason I'm asking is because my Scarlett solo gain turns up to around 1/4 before it starts clipping. I'm wondering If I am loosing something of my sound quality because I don't use guitar with less powered pickups that would allow Scarlett to open up its input gain more. I hope this makes sense, English is my second language. Thanks. Great video btw.
someone help me! my ampire shows no presents, there’s only “default” available :(
How come I only have a default amp with too much drive? My amp that pops up is different only one row of knobs...
So I want to use condensor mic and guitar on my 1810c. Do I need to connect the guitar to the line inputs on the back? Sadly there's no way to only turn on phantom power for some of the pres it's all or none.
The problem with this by the way is I can't easily adjust the knob from the front... this is pushing me towards the focusrite which has instrument mode, and separate phantom power circuits.
Does it come with reverb and delay- good ones? So I don’t need to buy again 3rd party vst 😝
Great video, you've simplified what's often a complicated procedure. Btw, you might want to change the device block size, as you're getting latency.
Change device block size? Higher or lower? Still trying to understand this setting(s)
@@michaelpal7641 Block size is basically the delay time (in samples) between input and output. Lower = less delay/latency, but increases CPU usage (which can distort the audio if it's too demanding of the CPU).
what about using my own amp i have it working but hear a static feedback that it also records with my guitar
My ampire only has default as an option is that normal?
Great video, I'm deciding between this interface, the Focusrite 2i2 3rd gen and the Audient 4. But this one has a great plus which is the VST software. Can it be used in Ableton?
Hi there, thank u for sharing the tutorial..anyway can you help me to advise setting studio one for recording using real amp and effect, so I don't need to put plug- ins, so I can get my own real amp and pedal sound precisely...
Thank u and have a good day..
Hey, I have a question, when I use a guitar and try to record I can hear the guitar before I activate the plugin but when I do I can barely hear the effect.
Just some hum along with the low guitar sound.
I hear some very low distortion no matter the gain settings and no matter which amp but, when I turn it up it's peaking like crazy, so when I adjust the levels and try to record I really don't hear the effect while playing.
I'm trying to figure out what the issue is?!
Going thru Audio Box USB96.
3 different guitars and it occurs when I try and record with the Bass also!
Studio One 5 Artist?
Suggestions?
not able to monitor sound no sound going to studio one. but can hear the un prossessed sound on the presonus
I am getting severe latency when I hit the monitor button when recording via asio/USB with the Spark 40 amp.
Any suggestions?
When engaging a high gain head, I still can listen to a clear guitar tone at the same time I listen to the high gain tone(as soon as I plug my guitar I can listen to it even if I'm not pressing the speaker button)
Been using studio one for a little while now and run into a problem whilst recording my guitar. I’m using an electric directly plugged into my Studio24C interface and somehow it’s picking up other signals. I’m wearing headphones, have the input dial at 0 and my guitar volume at 0 yet I can faintly hear my drum track playing in the recording. Has anyone else had this problem and know how to fix it?
The only thing I am missing that you did not mention all these things are for the professional version these presets are not in artist version at least my 6.5 artist preset list is blank
What type of cable did you use?
Do you have to download ampire effects ?
I'm getting some intermittent crackling and noise when using Ampire plug-ins etc. If I use no 'stomp box effects' plug ins etc i.e. clean guitar, it's clear. Does anyone know where the crackling is coming from?
if you've got an acoustic guitar how do you plugged it into your audio box?
thank you kindly my friend , very educational you helped me
my plugins are not working and when i click the record button its not working either
I am having an issue with playback on my studio monitors. I am only hearing my guitar through my headphones as well as the recorded playback. How can I get my playback through my monitors but my live feed through my headphones??!?! Anyone with help on this would be greatly appreciated!
Are you plugging the guitar into the mic jack or instr jack?
How can I have the sound thru the amp speaker and not from the headphones? I use Boss Katana as interface..pls help
Only able to hear empire, with effects, On stereo mode. Once I switch mono My tone immediately switches back to a clean sound. Does anyone know what’s going on? Thank you
More importantly, there is a delay between when I hit the strings, and I hear the sound. Any thoughts?
Thank you, mate! Finally someone who can explain so even an idiot like me understands. I´m gonna follow you from now.
Why am i getting a clean signal ? I tryin to get high gain.. what am i doing wrong?
can i go thru my pedalboard then into the audiobox?
David. I bought a CLA Wave Guitar Plugin and am using it with Studio One Artist that came with my AudioBox by Presonus. I'm not impressed with the sounds it makes but I liaised with CLA and they said 'Artist' won't hold it, and that I'd have to go for Professional which is a hell of a lot more money! Any insights or support most welcome. Thanks.
What happen if im using a condenser mic in input1 and I want to put a guitar in the input2? the 48V is going to burn my guitar?
I don't think the phantom power affects line inputs
Nah. You can check this yourself if you have a meter. But phantom power only gets applied to balanced (xlr) lines. It doesn't get applied to 1/4" lines because there just literally is no connection for it.
Does ampire have bass settings?
Very helpful vid. Btw how do you get it to sound through the speakers? I keep getting feedback.. I have a yamaha mg12xu mixer.
I was thinking that the interfaces like this shouldn't take a hi-z guitar input directly in because it's a mic-preamp. Shouldn't we be going through a DI box to drop the signal to a mic level? I see you're going in with an XLR cable, but you seemed to suggest you plug guitar right in? #confused
My Mac doesn’t even recognise the interface is plugged in but there is power coming through the interface can anyone help I am so stuck with this
I do not understand the mix knob at all. Can you please explain
Good video. Question, if you want a Mic and Guitar recording at once (so using 2 inputs) , and you need phantom power for Mic, I guess, this is not possible?
Thank you so much for your help. I bought the Audio box and I don’t know. But from now I know how to record the Guitar. 👍
Thank you for the tutorial! Very helpful!
A little problem though..When I'm playing my guitar and recording, I can completely hear the sound from my headphones L and R. But when I playback the recorded track, I can only hear it from R side. Did I miss a step somewhere in the settings?
Make the audio track mono, before recording.
Oh man. Thank you for the upload. Very informative. Good pointers. I'm subscribing!
Why do you have to record on mono and not stereo ?
Great video but sadly there are no presets on my ampire plug in.!!
How do you lower latency/lag during playback? Been wondering this. I don’t have the Presonus Audiobox I have the Scarlett 2i2 but ice read that you’re supposed to do lower the sample rate in daw and/or interface software. Any advice I’d really appreciate it!
Not sample rate, you want to lower the buffer size. That's the "Device Block" setting in Studio One, as well as the "dropout protection" setting. The lower you set them, the lower the latency. - Joe Gilder
PreSonus Audio Electronics awesome thank you very much
When I record a guitar and I made a mistake in the middle and I want just to fix a small part of it, when I click in record the sound that I have recorded its muted, but I like to listen to it, is possible to do it?
Bruno Rafael Claro don’t cheat and practice more ! C’m’on!
Thanks man, this really helped me out
Honestly the first minute of this video gave me way more questions than it did answers. I bought a Studio 24c and I didn't realize I needed an amp plugin, nor that I needed to plug my headphones into IT, not my computer, and since my headphone jack doesn't fit anywhere, I feel kinda screwed. Also, what kinda amp plugins are there that come with the Studio 24c? cuz I don't see the ampire in there at all. I just want to be able to hear my guitar on my computer man!
Using the Audio Box 2 on a PC with 6 gig of RAM, I have yet to find a way to play with the monitor that does not produce a ton of latency, creating a slap echo in the phones and making the track out of sync with the tracks being played back. Did you go over the settings for getting zero latency?
latency has some to do with RAM but mostly with CPU processing power. If you open Universal Control with Studio One closed you can set the appropriate Block size to monitor while playing. If you set the block size super low, say 32 samples, it'll be processing the sound in near real time, but unless you have a powerful CPU, you will not get any sound at all. The higher the Block size say 4096, will give more time for your CPU to process the sound, but you will hear an audible latency when monitoring. The key is to set the Block size to a point in which latency is a non issue, and your computer can handle it. If you have a CORE i5 processor that may be in the 128 to 256 Block size range. Once you're done recording, save your session, and change the block size to something much higher so that you can work on your track and not kill your CPU. Also, close all other apps whilst recording.