Lost the remote that came with my LG OLED and bought an OEM replacement one for it. COULD NOT get the pointer to work. Resetting the Magic remote fixed it! Thank you so much !!!
Hey man. I just want to specially thank you for this video. Even before the end, I solved a magic remote issue that has been given me serious concerns with my new TV. The pointer wasn't showing and as soon as I followed one of your instructions, BAAM! The tiny pointer showed up. Thank you so much. This was so helpful.
for me the poiner was not appearing when shaking the remote, but the cursor and other buttons worked fine. Your solution of de-registering and registering the remote back again worked out for me . Thanks !
I discovered by turning off quick start+ my pointer returned after trying so many other things. I think it kept saving the same settings by not turning completely off and staying in standby mode. It seemed to reset the tv, or perhaps just dumb luck. 😂 Maybe it will work for someone else!!
If you've tried everything to get your pointer back, and you're ready to throw the remote through the window, do the following: Go to SETTINGS (gear shaped button on the remote). Select GENERAL. Select ACCESSIBILITY. Turn AUDIO GUIDANCE Off. You're welcome.
That worked perfectly for me. Thank you!! In-laws were house sitting, we came back to hear the audio guidance on, but the pointer / mouse wouldn’t show on the tv. As soon as I turned the audio guidance off, the pointer reappeared. Just like magic. 🙂
Thank you reset helped i was using the tv without the pointer and my second tv with old magic remote was working fine,until now i use to hate the new magic controller but now it works
Wish re-registering it worked for me like it did for everyone else. De-registered it. The remote still worked but I kept seeing "Registration failed" and the sensor + wheel scroll still do not work. Now home + back don't even work. Had to hard factory reset and now my app can't even connect to my TV anymore, but the remote works fully.
Registering the controller worked for only 2 mins, then I stopped using the controller for 30 seconds and the pointer didn't worked again.. I've also changed the batteries to make sure..
The “OK” button on my magic remote stoped working., but the pointer was still working. The only thing that was not working was the ok button so I could not select anything. So I de-registered my remote by holding the home and back buttons until the power button flashed three times. However it flashed more than three time and now the pointer no long appears. End result OK butting and pointer not working and can’t even complete de-register the magic remote.
Hello!!Just came the remote.i've re registered it with the tv and.the only buttons that don't work with my CX are Disney,Rakutten buttons .. should i do anything else or there's no way to function those 2 buttons?
Hey my main select button is broken. Can I use any other button for alternative for ok?? Is there any such option. Alternative button for select/ok button?
The pointer uses Bluetooth while the buttons mostly use Infrared. Bluetooth needs more power so you would expect that to fail first when the batteries are running low.
![LG TV Magic Remote: How to Turn Pointer/Mouse Cursor Off! [Disable on webOS]](http://i.ytimg.com/vi/wGhDCJh_WsI/mqdefault.jpg)
See the full guide: www.lapseoftheshutter.com/lg-magic-remote-cursor-not-working/
Lost the remote that came with my LG OLED and bought an OEM replacement one for it. COULD NOT get the pointer to work. Resetting the Magic remote fixed it! Thank you so much !!!
Thank you so much sir re-registering my remote worked for me ❤. Your still saving lives in 2023❤❤❤
Hey man.
I just want to specially thank you for this video. Even before the end, I solved a magic remote issue that has been given me serious concerns with my new TV. The pointer wasn't showing and as soon as I followed one of your instructions, BAAM! The tiny pointer showed up.
Thank you so much.
This was so helpful.
Re-registrating remote worked for me. ❤ Thank you so much!!
How though? 😂
Thanks a lot brother
Still works after 1 years
That registering the remote is the solution ❤
The software update worked for me, thank you. Wish I saw this video before heading to buy new batteries for nothing 😂
thank you so much, was literally using the cursor then boom it stopped working. was about to lose my mind😂
for me the poiner was not appearing when shaking the remote, but the cursor and other buttons worked fine. Your solution of de-registering and registering the remote back again worked out for me . Thanks !
Mine's not registering back
What's the solution?
Thanks. Worked. Wand not working, so moved wheel up and down then pressed the wheel down and wand appeared. Saved me buying a new one. Cheers.
holding the home & power button saved me! thank you king!!!
Thank you! I got my Tv only 2 weeks and this happened! A hard reset - tv helped it.
Holding down the power button for 10 seconds worked for me!
Quick re-register worked. Seems like that’s the most common issue. Thank you.
Thank you so very much, resetting the remote using Home + Back button helped fix the pointer problem.
First suggestion to scroll worked immediately !! Thanks so much !
Thanks man holding the two buttons was the trick
Good to hear
Same with me
Reseting the remote worked for me, thanks a bunch.
Thanks. The re-registering fixed my remote.
Thanks so much for this! Mine worked after the soft reset on the lg tv. Your awesome!
Option 4 worked for me. thanks!
Thank you! Reregistering the remote sorted it out for me. Huge thanks.
Great!
I discovered by turning off quick start+ my pointer returned after trying so many other things. I think it kept saving the same settings by not turning completely off and staying in standby mode. It seemed to reset the tv, or perhaps just dumb luck. 😂 Maybe it will work for someone else!!
Home and back button worked perfectly 👌 Thanks a lot dude❤
I just removed the batteries and put those back, it worked. Thanks
If you've tried everything to get your pointer back, and you're ready to throw the remote through the window, do the following: Go to SETTINGS (gear shaped button on the remote). Select GENERAL. Select ACCESSIBILITY. Turn AUDIO GUIDANCE Off. You're welcome.
Didn't work
That worked perfectly for me. Thank you!! In-laws were house sitting, we came back to hear the audio guidance on, but the pointer / mouse wouldn’t show on the tv. As soon as I turned the audio guidance off, the pointer reappeared. Just like magic. 🙂
Re-registering the remote solved the pointer issue. Thanks for information. 😊
Great 👍
Same 😃👍
Thank you reset helped i was using the tv without the pointer and my second tv with old magic remote was working fine,until now i use to hate the new magic controller but now it works
Tried new batteries didn't work but re registering remote worked thanks
Thanks! Re-registering helped me.
Thank you! Re-registering fixed it
Thanks man the remote reset work for me. 😅
Thank buddy. Option 4 worked
Wish re-registering it worked for me like it did for everyone else.
De-registered it. The remote still worked but I kept seeing "Registration failed" and the sensor + wheel scroll still do not work. Now home + back don't even work. Had to hard factory reset and now my app can't even connect to my TV anymore, but the remote works fully.
Registering the controller worked for only 2 mins, then I stopped using the controller for 30 seconds and the pointer didn't worked again..
I've also changed the batteries to make sure..
Your Step 1.2.2. Worked.
Thanks
Thanks
Thank you.. i got it resolved
Thank you! Deregistering it worked for me 👍🏼
factoe resetting of remote is the best to me thanks so much brother.
Thanks
Respect mate got there at step 4
How do you make the pointer align to the centre of the tv ?
The “OK” button on my magic remote stoped working., but the pointer was still working. The only thing that was not working was the ok button so I could not select anything. So I de-registered my remote by holding the home and back buttons until the power button flashed three times. However it flashed more than three time and now the pointer no long appears. End result OK butting and pointer not working and can’t even complete de-register the magic remote.
Hello!!Just came the remote.i've re registered it with the tv and.the only buttons that don't work with my CX are Disney,Rakutten buttons .. should i do anything else or there's no way to function those 2 buttons?
Thanku ,re registering remote worked. 🙏🏻 N i was charging the remote batteries from 2 weeks😂
Thank you very much i doing reset control and it work❤
THANKS BROO!!! i was come crazy with remote conrtol.. and i was must reset tv.. later i sworking..
No problem 👍
Resetting the TV worked successfully
Thanks
Your reset instructions did the trick... Thank you so much...
Thanks
Thank you, reset magic remote worked with me
Glad it helped
the tv lg c2 says the remote is not supported by this tv
You're a life saver!
This totally worked……
Thanks 🎉
You're welcome!
1000 благодарности ! рестарт на ТВ и се оправи !
Works reset my remote on my cx
Hey my main select button is broken. Can I use any other button for alternative for ok?? Is there any such option. Alternative button for select/ok button?
I can't find any other button, unfortunately.
Thank you sir the two button reset done the trick
Thankyou this really help me
This remote would work for the TV model UM7600PLB? Gracias
Thank you brother (tuch maza bhau) ❤
Thanks man
Thank you. It is working now👍
Thanks
Thank you
Thank you so much!!! 🎉
You're welcome
Когато е включена функцията - гласово показване на командите - тя е за слепи , и тогава курсорът автоматично изчезва . след малко време .
nr.4 worked
How can you update your TV if the remote ain't working and usb ain't an option 🤦🤦 these are not tips it's common bloody sense.
I think i slapped my remote to hard and now it doesnt work
love you so mucy
Mine is not working only in RUclips
Thanks sir
You're welcome
Thankyou 👍🏻
You're welcome
This remote eats batteries within days after that pointer stops working
The pointer uses Bluetooth while the buttons mostly use Infrared. Bluetooth needs more power so you would expect that to fail first when the batteries are running low.
I WISH my pointer didn't work! It sucks!
Reregistering the remote worked thanks og stackadolla