This 30 Year Old CNC Will Never be the Same | GIACO
HTML-код
- Опубликовано: 5 мар 2019
- 😍😍😍 Kinetic Driver: kinetic-driver.backerkit.com/...
This CNC used to run with magnetic tape or manual feed. Now thigs are more like this millennium... And I love it!!!
⇒ INSTAGRAM:
goo.gl/Af9Yf7
⇒ FACEBOOK:
goo.gl/v4bs3R
Musci at the end thing: • Shave and a Haircut (t...
▬▬▬▬▬▬▬▬▬▬ஜ۩۞۩ஜ▬▬▬▬▬▬▬▬▬▬
▶ SUBSCRIBE to my RUclips Channel: goo.gl/zCVrvj
⇒ Twitter to tell me stuff: goo.gl/DvrjpM
▶ If you enjoy my video, please consider to SHARE on your favorite social! It’s the best way to really help me out!
⇒ INSTAGRAM:
goo.gl/Af9Yf7
⇒ FACEBOOK:
goo.gl/v4bs3R - Хобби
Cool! Give that CNC a really good clean. I wanna see it shine for the first cut in its new home.
came here to tell them to get the IPA out ... it'd clean up really nice ;)
LOL at "So it doesn't work without the battery, that's crazy!"
Perhaps remove the way covers and clean them nicely from all the gunk that has accumulated in the last 30years. And see if there is any galling/fretting. And check if all the oil piping is in good order.
Next thing is to level the bed. Otherwise it won't cut accurately.
I wouldn't use these machines for too much fine 3D interpolation , aka Fusion360 stuff. These machines aren't build for it, they like beefy cuts, no small stuff. Lots of repetitive small movements will displace/push out the oil out of the machine ways and you'll end up with worn out ways, ie a trashed machine.
The air pressure is to clean out the cooling canals in tools if they have so they dont fill up the toolchanger with liquid.
Its for some more stuff but this is one of them.
"How about shipping?"
SAVAGE
So excited to see more just like this!
oh that is so coool! It looks really complicated but you all seem to be going in the right direction, with tentative steps. Good luck guys!
Awesome! Its incredible to see older equipment modified to work with modern devices. Sweet upload!
That’s a pretty sweet machine! 👍🏼👍🏼 glad you got it working
So cool to see that old beast in motion! Nice work, men!
I love these things, I currently have to figure out how to talk to an old thing of tech, it is so satisfying when you get the first message that makes sense!
What's so hard to do? Learn the language, likly Fortran, or update it to current technology.
I love Fanuc management, i've been pogramming on Mori Seiki, old lathe cnc machine with Fanuc 2 years and it's fantastic :)
Giaco those karcher floor sweepers are great, I've just got one for my warehouse and I'm already considering butchering a cheap roomba to make it drive itself around the floor at midnight.
just use an APM flight controller in rover mode.
Who else kept checking the timeline not wanting the video to be over.. :-) That is awesome Giaco! Cant wait to see it make shavings!!!
Awesome work guys! Can't wait to see some projects coming out of the new 'factory'.
That thing is a monster! Can't wait to see what you do with it!
The compressed air through the spindle is a purge to blow chips and grit off of the taper during tool changes.
Thats super awesome!
love your videos
The control panel is beautiful
Coming close on 500k congrats
It's ALIVE , It's ALIVE .. So very happy for your progress and better put a fence or barrier on that ABYSS on the second floor . We don't want to lose anybody !!!!!!! Wish I could be there to help ... Stay well my friend .. Bela Vide
It's aliiiiiiive! And while I love that it can work from a new computer, all those old switches and knobs on the control panel are just fantastic.
Agreed, something about that control panel presses all the right button for me.
Only missing a Norwegian there and Scandinavia is represented! Skål!
ooh glad to see one of the machines running. cant wait till the fancy montages when u making stuff with it,.
The drone flying got me thinking of Davids time working for Flitetest, when he used to say "I landed it". David (if you read this), this shop looks perfect for flying around in with one of your small tricopters!
There is another page that should state work offsets or wcs and that is where you set your zero for your x y z axis. If you have the manual look up work coordinate system and it should be in there. I have a Fanuc 10t lathe so everything is very similar on the control.
love your vids cant wait for my maker knife to come
SOOO GREAT! nice to see😀🍀
I have an old (1980s) Hurco CNC milling machine. I just don't what to do with it? Retrofit/update might be an optician?
Nice work ON THE MILL!! Also... this is the first time a giaco video Has given me motion sickness! LOL
Damn. That was quick, Giaco! :D
Color display! I'm so jealous! Seeing that first bit of g-code loading into the machine is so satisfying.
It really is!!! :)
Spettacolo puro vederla che si muove !!!! :-D
I would like to ask the camera you used to capture this video. Many thanks!
Big machines = Awesome!
the compressed air is to blow the chips out of the spindle so when you change tools you don't get shit stuck between the spindle taper and the tool holder.
David Windestal! Can't wait to see more rocket stuff.
Looks like an old Fanuc 10/11. They had tape capabilities, but that was kind of a leftover from early days. Most shops were converted to RS232 by the time F10/11s came around. If that panel happens to have the manual ABS/Inc switch on it, make sure you leave it on ABS! Couldn't tell you how many service calls I made on machines that still had that stupid switch. Some were pretty severe crashes....
Awesome! So how much did this mill cost? Weight, voltage it runs on, specs?
great video! I want to see more projects soon! Love your stuff keep it up, you're a big inspo for my vids :)
Que calidad!! :D
Thants exactly the same way i started to work wiht my xcarve :D
The music style sounds like the music on Lasse Gjertsen's videos.
Very exciting moments... for a CNC geek like me. Haha!
i love this machine to be retrofit with masso controller or centroid cnc controller
Ooooooooooooooooooooooooooooooo it's aliiiiiiiiiiiiiiive!!!! Can't wait to see that behemoth spitting out parts! It would be funny to make something super tiny and delicate with it.
Hey can you link the webside of the danish guys? Im really interested in their RS232 device!
PS: Your machine needs the compressed air to clean the taper during the toolchange, every liitle chip on the taper can destroy it.
Write to sjoner
Hes here on yt
Any new video with that machine. want to see it work
i was waiting for the drip feed...? does it work ?
What is the app and hardware you are using to interface the VMC? Is it generic or only for that machine?
funny stuff. love that you are all going at it, trying to learn all these new equipment. Giaco will you be at makers central shameless plugging the maker knife like you did in this video 😂
Waiting for my Maker Knife is like waiting for the new Tool ... album
Hello you think you can help me with a old Hardinge with fanuc 21i-t controller
Say it with me... Antenna orientation is important...
Hahahahaha yup
More please.
I just want to say I say you have a nest outdoor cam. I think that’s really amazing. I work for nest!
❤️ Send some camera over... :)))
the air is to keep the taper clear of chips.good luck holding any precision after you got a chip booger in the clamping area.
Holy crap that's a big machine.
Good boy!
Sweet! We've got some old stuff modified with floppy emulators so we can use USB. Only issue is that the USB has to be formatted into 1.44MB partitions. Old stuff can work great with some workarounds. Congrats! I'll bet it's a great feeling to watch it move under power.
That is a pain in the ass. Drip feeding over RS232 is the way to go.
@@ianwhatmough150 For our applications it works fine. No computer required at the machine. $50 investment 5 year ago. Zero complaints.
Fanuc should of kept making control like this one for all machines nice big screen and u can see code ahead
looks like a Fanuc control. you can easily just slap more memory chips in it.
Video went by fastest than I realized
Hopefully? lol... Drip Feed or Trickle Feed. Congratulations Giaco.
Will it be used both for wood and metal? If everything goes well with this machine you could clean it (and give it a new paint job) and add something useful on a CNC : a camera linked to a raspberry pi. You could then see on a screen what's happening and even stream it!
9:11 looks like 50 year old spacecrafts powering up
solution for your squatter problem: invite a couple car guys over and have them anti-lag or 2 step their cars inside your building. lol. the squatters will think there is gun fire and will surely make them run. try it.
on second thought, might not be a good idea. the accumulating fumes could gas them out and actually may kill them lol. I'm sure you don't want any murder charges in the new show, just yet.
Looks like fanuc 15 .IT IS ?
i love the kitamore (the cnc) it looks so awesome it's a bit adam savage style ;)
where does your music comes from ?
and its a nice video
*Kitamura.
@@zaprodk thanks i dont now how to type it
@@fredraketfpv Well, now you do :)
does anyone have docs about an old Huron SBX ?
Cosa c'era in quel buco al secondo piano?
Switch and lever is at your place?
Yes.
Do you have the post processor for Fusion 360 or whatever CAM platform you are using?
Nope
@@GiacoWhatever Hopefully a generic post will work. It might be problematic to code a post from scratch or modify a generic post. Be careful that the tool spindle orientation is working before you run a tapping cycle
@@ianwhatmough150 I don't think it should be that problematic to modify a generic post since we have the manuals and can figure out the feature set reasonably easy. It mostly seems like it's a bit finicky in how the G-code is formatted, in which case modifying the post processor should be easy. Though, since it's a fairly common controller I think the odds of finding a post processor that works without hacking it to pieces manually are pretty decent.
I think I recognize the voice from flite test, but not the epic beard. Is David Windestal hiding under there?
I thaught the same exact thing!! Haha. Yep its him
CNC is a Kitamura Bridgecenter-8
i have a fully rebuild deckel fp3a cnc for sale if you need another one, it has a new mach 3 control stuff so can work with any cad/cam program. and is converted by phillips to mill 3 axis simultaneously. located in the south of the netherlands.
Deckel FP-NC with Mach3 is trash. You'll loose all the accuracy without using glass scales. Leave and use them with the Dialog4/11, they are great controls
@@hinz1 its never had glass scales, this one was chanced by phillips to run a num control with 0.005mm accuracy. But num is difficult to program
Ich sehe ein schattenmacher fan
I would plot for the yaw in there.
I would be terrified of crashing that monster too lol!. and everyone who ever ran a cnc machine knows crashes are inevitable!
We got a CNC at work, but can't get it going😭
Denmark 💕
Time for a retrofit
7:20 my face when i'm trying to learn arduino.
That handheld camera business makes me sick.
11:46 Turkish flag on the hat is an unexpected surprise. greetings from turkey btw ;)
The guy in the grey sweater at the beginning super thick
giaco, that voice of the bearded one in the video, is that the intern from flite test, I can't remember his name but the voice, the voice, .......
That index finger next to the main line during power up.
That freaked me out. Please never do that.
It's a Fanuc 11M on a Kitty. Easy control to run, easy to program and easy to DNC.
Do you know why when I jog it it doesn’t show the right measurement on screen?
@@GiacoWhatever What screen are you referencing? ABS, REL OR MACHINE?
Terry Moore all of them... they are in mm but it moves a lot more tgan it’s showing
@@GiacoWhatever Home the machine look in the POS page, select REL and preset the machine to XYZ 0 in Relative, then go to MDI and command G20 for inch mode and try again.
BTW, those old 10/11M controls required a mnemonic command to set tools and fixture offsets unless you see the Measure and Measure+ softkeys in the Work offset and Tool offset pages.
This is rad, but what the heck are you planning on making with such a massive machine?
Massive, pssh
A Mavic when you got the man who practically invented drone filming already in the house...?
long life to katimura a new freand
Make more nerf guns
👍
14:30 me too XD
Was the audio wonky or is it just me
Sorry to say but older Cnc’s do not run adaptive toolpaths well at all. Very jerky, not smooth and very slow.
Where’s AvE when ya need him!?
AVE can barely use a brand new machine that works out of the box
@@highvoltagefeathers He said he knew someone that actually codes for CNCs.
Mi fa strano vedere degli Italiani fare video in inglese, ma capisco che il mondo evolve... Mettete una bella Tricolore su quelle pareti, mi raccomando!
Oh man , I with you guys put some Styrofoam there to cut it. Just to see it ..