My GF bought me one. Costs less than $50. Now into deep into the hobby. Bought every upgrade for the chassis and motors. Chasis upgrades cost around $100. Bought accessories costing around $70. I might buy more accessories in the future. Also will be re-painting the whole body and buying some more stickers. Hahaha!
Hello . Fantastic upgrade and review ! I ordered most of the stuff you showed from Aliexpress but the link to the ESC is dead. I found another link to the Dumborc transmitter + ESC . Can you tell me which model is correct for the MN82 ? Thanks ! X6PM-350 X6F X6PM-350 BL3FG X6PM-350 BL3F X6PM-350 X6FP X6PM-350 X6DCG X6PM-350 X6DC X6PM-350 X6FG X6PM-350 X6F X6PM-350 X6FG X6PM-350 X4FMG X6PM-350 X4FM as you can see it's confusing lol - was there a similar model number to any of these on your ESC ? Thanks again .
I did this upgrade, and it was excellent. But with the extra weight, and on very steep climbs, the original battery (500mAh) only lasts 12 minutes. What should I do to improve this? just change the battery? what type? or engine too? But will the board withstand these upgrades? Which model did you exchange for? Can you send me the link and which models?
1500 mah batteries are what a friend and I switched to. But this does not give power, only more playtime. For more power you want a bigger motor. I haven't got one yet but a 370 brushless motor seems like the go to. But you'll want to invest in a soldering iron and some solder for this an future electronic stuff.
do you think mn82 is better than wpl c74 (suzuki jimny) ? im going to buy my first ever crawler and i am between mn82 and c74, 1/12 vs 1/10 but wich one is better?
Boas! Parabéns pelo Canal! Uma pergunta simples... para colocar mais um conjunto de leds (barra leds, etc) que necessito? À algum cabo ou adaptador que necessite comprar para ligar à placa de circuito? Reparo que tem uma saida de 6 pins sem nada ligado...
Hello! I just wanna ask either the channel or anyone here with the metal axles, did the rear axle come with bearings inside? Because reports from other people say that the rear axle binds and breaks due to the absence of bearings which have a slot in there. Thanks!
I have purchased the axle upgrade from AliExpress recently, and the bearings came along along. The screws are still an issue, you may need spares, I'm new to this hobby recently, and I was able to make it work.
Hi, can you help me? I bought ESC and 370 31T motor. Same as yours. My problem is, how can i plug the Neebrc 370 31T? The cable is bigger than the plug of ESC. Thank you. Hope you can help me
Gostava de saber qual o plug certo para o ESC. e que fizesses um videos com "como montar motor esc e o que ter em atenção" ha muita falta de informação. Obrigado pelos videos❤
Belos upgrades! Agora o Toyota trepa um pinheiro se for preciso. 😛 PS: o motor tem 34 "turns", não "teeth". 😉 São as "voltas" de fio de cobre que tem em determinada parte do interior. :) Já ganhaste mais um subscritor! :)
@@CarsTrucks4Fun one more question what steering servo are you using can i get the link? I buy a 21g servo but its big the size of the new servo cannot fit in my mn82… can i get the link? Thank you sir!!!
How much height did you win with this metal upgrade? Did you also change the chassis for a metal chassis? I think the original mn82 is too light and need upgrades to have more height and with that, increase traction.
Hello, greetings. I have a question maybe you can help me…. I bought an RC MN82, I wanted more power and I bought a 370 motor for that model, but it didn't work for me, could it be that the motor is defective or I have to make another configuration, thank you.
Não consegues fazer um video a mudar a esc? Queria pôr um motor 370 no meu, mas não entendo nada de RC. Com uma esc diferente dá para usar o comando original? Obrigado
Those axles are very pretty but I sure wish they were the same width as the stock ones. The wheels sit out too far for my liking. Do you know if there is any companies that sell metal axles of the same exact dimensions as the factory plastic ones?
Har har mahadev Jai shree ram Jai mata di Jai shree krishna Jai shree mahakal Jai shree Ganesh Jai shree kartikey Jai shree Hanuman Jai shree Vishnu dev Jai shree shyam Jai shree Balaji Jai shree Brahma dev Jai shree kal bhairav baba ki jai radhe radhe❤
@@CarsTrucks4Fun And in yor case the shocks perform better than in my mn128 due to the extra weight of the metal parts. This is an extremely good looking rc and for 150eur totalwith upgrades you can get a super scale 1\12. If only they sold 1\10 scale...would be ideal because most accessories are for 1\10
Depends on the shocks, I'm using the 1/18 TRX4M and the springs are a bit weak, 0.6mm diameter, if you have the cheapest shorty one, it's kind of useless and it only has 7mm travel, also depends on the body/battery weight
Maybe you need to use lighter weight oil also, and play with the piston position when closing the cap, either fully extended, mid way or full compression, it will behave differently
My GF bought me one. Costs less than $50.
Now into deep into the hobby.
Bought every upgrade for the chassis and motors. Chasis upgrades cost around $100. Bought accessories costing around $70. I might buy more accessories in the future.
Also will be re-painting the whole body and buying some more stickers.
Hahaha!
I bought a bunch of stuff to mod mine! I want to see more of this truck!
This is what I’ve always wanted my little yota to be like! Great video and thank you for the links to the parts!
Awesome crawling video and great rig with all those upgrades!
WoW 😮🤩😍
Belos Upgrades e que fantástica partilha de informação meu Amigo 🐼👌🏻
Obrigado.
Forte Abraço Amigo!!!!
Já fiquei com ideias HéHéHé 😂
Гарний тюнінг,шини мягкі дуже добра прохідність 👌👌👍😊
Super nice video. The car it's only the body of the stock rig. But nice to see whats possible.👍💪
You are awesome dude thanks for everythink we have learn from u rc god u are!
If I am not mistaken but did those upgrades cost at least three times more than the actual truck?
It does, upgrades of JJRCs, WPLs, and MNs are usually twice the cost of the original trucks.
@@aces6262 😲 wow! We have ordered two so I think will be leaving them stock, probably not at all 😂🤦
You’re missing the point
@@DaddyDaughterRC-sw2zbmy c24 build ended up being over $300
Bloody hell... 😂@@aces6262
You have a cool cellection, i am just starting with rc cars
First one i had was wltoys 12428 it was super fun for cheap
nice done, can not wait tell see the new motor video.
A perfect modification! Thanks for your information.
Man I need that sticker on that car body. From where did you get it?
the stickers come with the model
got my like. excellent video. friend, did you cut the shock absorber springs?
No
Which plug does your ESC have ?
Upgradenya keren, mobilnya akhirnya bisa melewati semua rintangan
can you share 3d printed part? (wheel hub adapter for injora rim)
Superbe video, je n'avais pas bien vue les upgrade 👌
What size is that figurine? Did you have to ampute it lol
its 1/12 scale with no legs
Did you change the rear shocks? If you didn't, it is possible to change them?
Please send link of rear shocks.
It is possible to change but the improvments are not very high. So i dont change mines. I will upload a link in this comment for the shocks
Does the adapter for fitting the rims to the axles come with the rims, or did you buy it separately?
he said he print them in 3d printer but I am sure you can find them online
Thank’s bro.
I can get tou the stl file
Very cool! What's the approximate top speed of this pickup? Can it go up to 10 km/h?
Yes
Hello . Fantastic upgrade and review ! I ordered most of the stuff you showed from Aliexpress but the link to the ESC is dead. I found another link to the Dumborc transmitter + ESC . Can you tell me which model is correct for the MN82 ? Thanks !
X6PM-350 X6F
X6PM-350 BL3FG
X6PM-350 BL3F
X6PM-350 X6FP
X6PM-350 X6DCG
X6PM-350 X6DC
X6PM-350 X6FG
X6PM-350 X6F
X6PM-350 X6FG
X6PM-350 X4FMG
X6PM-350 X4FM
as you can see it's confusing lol - was there a similar model number to any of these on your ESC ? Thanks again .
thanks for the update about the links. everything is working now and transmitter model on description
I did this upgrade, and it was excellent. But with the extra weight, and on very steep climbs, the original battery (500mAh) only lasts 12 minutes. What should I do to improve this? just change the battery? what type? or engine too? But will the board withstand these upgrades? Which model did you exchange for? Can you send me the link and which models?
All the links are in the description
How much weight did you earn?
1500 mah batteries are what a friend and I switched to. But this does not give power, only more playtime. For more power you want a bigger motor. I haven't got one yet but a 370 brushless motor seems like the go to. But you'll want to invest in a soldering iron and some solder for this an future electronic stuff.
Where can I buy this kit?
@@philipshields2131i saw there arę 5000 mAh betteries, will it be allright for stock mn82 ?
do you think mn82 is better than wpl c74 (suzuki jimny) ? im going to buy my first ever crawler and i am between mn82 and c74, 1/12 vs 1/10 but wich one is better?
both can be heavily modified but if you are looking for rock crawling go for c74 and if you want a trail truck go with mn82
Wow wow wow bro..❤❤❤..nice!
Boas! Parabéns pelo Canal!
Uma pergunta simples... para colocar mais um conjunto de leds (barra leds, etc) que necessito? À algum cabo ou adaptador que necessite comprar para ligar à placa de circuito?
Reparo que tem uma saida de 6 pins sem nada ligado...
Hello! I just wanna ask either the channel or anyone here with the metal axles, did the rear axle come with bearings inside?
Because reports from other people say that the rear axle binds and breaks due to the absence of bearings which have a slot in there. Thanks!
I have purchased the axle upgrade from AliExpress recently, and the bearings came along along. The screws are still an issue, you may need spares, I'm new to this hobby recently, and I was able to make it work.
Hi friend can you tell me where i can buy that tires and wheels pls😅🙏
link on the video description
Hi, can you help me? I bought ESC and 370 31T motor. Same as yours. My problem is, how can i plug the Neebrc 370 31T? The cable is bigger than the plug of ESC. Thank you. Hope you can help me
Send me fotos
@@CarsTrucks4Fun already fixed it bro, i cut the ESC plug and change it to bigger size. Thank you for replying bro
thats so cool
Where can I buy a metal front and rear bumper for this model?
i think is not available right now
Gostava de saber qual o plug certo para o ESC. e que fizesses um videos com "como montar motor esc e o que ter em atenção" ha muita falta de informação.
Obrigado pelos videos❤
Belos upgrades! Agora o Toyota trepa um pinheiro se for preciso. 😛
PS: o motor tem 34 "turns", não "teeth". 😉 São as "voltas" de fio de cobre que tem em determinada parte do interior. :)
Já ganhaste mais um subscritor! :)
What battery do you have in this RC ??
I would like to ask the tire size of your rig sir?? Planning to put those tires on my mn82 too but can i get the tire size? Is it 57mm
64mm
@@CarsTrucks4Fun one more question what steering servo are you using can i get the link? I buy a 21g servo but its big the size of the new servo cannot fit in my mn82… can i get the link? Thank you sir!!!
What if you only use a 2,65 mm offset wheels instead of the 3,75 mm offset wheels you installed?
Does it cause any problems?
Can you share a link for the motor please?
Already on description
Where do you find these beautiful locations?
Hi. Have you tried an 370 motor with that esc? I bought that 1060 esc and my motor (370) quickly became hot. I can't even touch it. Thanks.
How much height did you win with this metal upgrade?
Did you also change the chassis for a metal chassis?
I think the original mn82 is too light and need upgrades to have more height and with that, increase traction.
Eu acredito que faltou relacionar ou mencionar sobre a bateria, se manteve a mesma ou se usou uma diferente!
Mesma bateria
The Battery is type JST connector, 7.4v
Hello, greetings. I have a question maybe you can help me….
I bought an RC MN82, I wanted more power and I bought a 370 motor for that model, but it didn't work for me, could it be that the motor is defective or I have to make another configuration, thank you.
I think you need a better esc
Is that gardan gear like mn 99, easy to broken ?
What tires you install?
Super upgradé et jolie vidéo👌
Não consegues fazer um video a mudar a esc?
Queria pôr um motor 370 no meu, mas não entendo nada de RC. Com uma esc diferente dá para usar o comando original?
Obrigado
Has the servo caused you problems?
No. Just fine for me
Where can I buy this kit?
@@אלקנהברוך-ז3צ link on description
@@CarsTrucks4Fun There are three.. which one? And is there an Ali Express way?
What size rims and what tires?
Links are in the discription of the video
Rim size 15, Tyre brand RADAR RENEGADE RT+ MT
how much running time do get with a full charged battery?
How much did you spend in total? Thank you for the video.
Are the parts linked?
link on the video description
Can you pls tell me what are the parts pls
@@SethDoronila link on description
Friend, is the diameter of your tire 64mm or 70mm? I would really appreciate it if you could tell me.
70mm will not fit I think they are 64mm
64mm
Boas o site injora e português?
Nao. Mas podes comprar sem problemas
Those axles are very pretty but I sure wish they were the same width as the stock ones. The wheels sit out too far for my liking. Do you know if there is any companies that sell metal axles of the same exact dimensions as the factory plastic ones?
you can use smaller spacers I guess?
Does this make the WHINE go away?
What size injora rims?
is a link on the description for that
Awesome 😍
That 1.0 tires get too much weight from the rigs, see how it handles terrain. they literally sliding and not much grip.
What inch size rims?
Link on description
i got one but cant get it to run....btterys are on in controller and car, and lights on but it only turns, it doesnt run,, how do i get it to run?
You have to bind the RC to the Transmitter.
Nice truck
cool mates.
thanks
❤obrigado amigo. Gran video😊
@@santiagovazquez2050 obrigado eu por assistir
Har har mahadev
Jai shree ram
Jai mata di
Jai shree krishna
Jai shree mahakal
Jai shree Ganesh
Jai shree kartikey
Jai shree Hanuman
Jai shree Vishnu dev
Jai shree shyam
Jai shree Balaji
Jai shree Brahma dev
Jai shree kal bhairav baba ki jai
radhe radhe❤
The motor still stock?
Yes.
STL pls
Updated in Description
Those back tires look like they're rubbing
Yes but 1000% money invested...Those oil filled shocks have too stiff springs. I had to cut mine to softem them up.
Ok 100% then
@@CarsTrucks4Fun And in yor case the shocks perform better than in my mn128 due to the extra weight of the metal parts. This is an extremely good looking rc and for 150eur totalwith upgrades you can get a super scale 1\12. If only they sold 1\10 scale...would be ideal because most accessories are for 1\10
Depends on the shocks, I'm using the 1/18 TRX4M and the springs are a bit weak, 0.6mm diameter, if you have the cheapest shorty one, it's kind of useless and it only has 7mm travel, also depends on the body/battery weight
Maybe you need to use lighter weight oil also, and play with the piston position when closing the cap, either fully extended, mid way or full compression, it will behave differently
Those are not oil filled
🇧🇷🚜👍
FOR ANYONE WONDERING ABOUT THE BATTERY
Tu és tuga...😂😂😂
👌
@@CarsTrucks4Fun o meu chegou hoje...
مرحبا صديقي هل يمكنك مساعدتي لم أعرف كيف اقوم بوزن عمود الإلتفاف في الأمام لقد جننت
Emyen 82
Tu és português desculpa la
I'm afraid not...
DONT MAKE YOUR RC CAR METAL NOT EVEN 1 PART IT WILL MAKE IT SLOW AND WEAKER
It weighs down the bottom which makes it have more grip and makes it less top heavy
ه٢ يهصظ😊قتص
CHAPUZAS
Which battery did you use? What means without giro?
ruclips.net/video/uEETQqIJjnk/видео.html