The Ikea here in Frisco, TX has a peg board with the led lights on it on display in the show room. Made me want to do one then I found your vid. I just painted my office so I'm going to run some conduit to hide the power cable and then paint over it with the left over paint.
Love, love, LOVE the light strips idea. I've thought of this but love to actually see it. Your explanations & tips were great! Glad I saw this just before and not just after I finish my project!!
Great Video, thank you so much for the video, Can you please provide the link of that hook in which you hanged the Hagibis RGB led.... i need exactly in black .... waiting for your reply
That was sick also the fact that you have 210 subscribers I thought you had more because everything was professional the lighting, the camera, and the microphone it was so perfect continue your dream and continue doing youtube great work
Hi, new subscriber here. Can you tell me where you found the white holders next to the scissors on the bottom row? I’ve looked everywhere with no luck. Thank you.
Technically this version does have a white and warm light selection, but it is not very good, it has a blueish hue. The Govee RGBWW models have a proper white and warm light.
Have thought about this...wall anchor will determine the main load yes. I wouldn’t push it, as the pegboard material is just fiberboard and the joint is just a finger screw. I’ve seen a redditor mount a whole set of paintball guns. Those things are relatively heavy? but well distributed.
@@DNChromatic guess when ikea gets them back in stock where i live, ill just have to get one to try it out :) maybe i can screw the metal rail directly into a timber support. If there is a will, theres a way :)
Thanks a lot for the great video! I might skip the LED strips and go for a bigger light behind after providing enough space behind. Trying to collect ideas :)
They are actually just budget RGB video light wands . I found them here (affiliate link) geni.us/n8dU. Keep in mind they don't have a built in magnet, I added my own magnetic strips to the back. It's light enough that magnet tape can hold them up. Other video lights with magnet you can search nanlite pavotube
Great vid.. In the planning phase for me now... btw, I had a similar issue with the dots showing a bit more than wanted on the back of a large wall mirror rgb project. Ended up putting spacers behind the mirror and that led to a nice glow with minimal dots showing now. You may want to steal that idea???? ;)
hi could you tell me what the rail things you put on wall to hang peg boards do they come with peg boards and also what are the light hanging on them look like mini light sabers??
Where did you get those magnet lights from the beginning?!
The Ikea here in Frisco, TX has a peg board with the led lights on it on display in the show room. Made me want to do one then I found your vid. I just painted my office so I'm going to run some conduit to hide the power cable and then paint over it with the left over paint.
Like the sound of that.
Love, love, LOVE the light strips idea. I've thought of this but love to actually see it. Your explanations & tips were great! Glad I saw this just before and not just after I finish my project!!
Great Video, thank you so much for the video, Can you please provide the link of that hook in which you hanged the Hagibis RGB led.... i need exactly in black .... waiting for your reply
I tried something like this www.amazon.com/Magnetic-Strips-Adhesive-Backing-Kitchen/dp/B087Z8QNZ2/
Certainly, stands out. You've inspired me to mimic this setup on my boring wall.
Found your channel through the algorithm! Keep it up brother!
Love this build. I've got a ton of LIFX strips in my office currently and might try something similar with a pegboard.
Lifx would definitely look better as they have more accurate whites and yellows.
love those posters at 1:07! Where'd you get them?
I think these are from displate, Metal posters
Maybe see if diffuser strips make a difference with the led dots? Luv the leds behind the pegboard along with the music mode!
Yes it’s a good idea, 👍🏼it didn’t improve much for me, however it could be the paint finish.
Found this during a meal right before shopping at IKEA. Sick idea🔥
That was sick also the fact that you have 210 subscribers I thought you had more because everything was professional the lighting, the camera, and the microphone it was so perfect continue your dream and continue doing youtube great work
🙏 thanks for the comment. I still have a lot to improve on.
He has definitely grown alot more than that
This is so cool! You've really inspired me to dive into LED strip lights!
Los accesorios del panel que usas ¿son los originales de IKEA? Aqui en España no estan algunos de ellos. Un saludo
What lightbars are those that you have on the peg board?
Really nice man..keep it up!
Hi, new subscriber here. Can you tell me where you found the white holders next to the scissors on the bottom row? I’ve looked everywhere with no luck. Thank you.
Are they not selling these anymore? Here’s the best I could find. ebay.to/3Nmc2j2
Thank you.
I have a tv in garage man cave. I would like to put this around tv. Do u think it will be a good idea to cut it nd fit it on wall around tv?
thank you. I was looking for how to install but you showed so much more! I thought for sure you'd put a the black pegboard, but this looks awesome.
Great!
Is this white light here: 04:24 ?
I am looking for rgb strip but white color is required for me
Technically this version does have a white and warm light selection, but it is not very good, it has a blueish hue. The Govee RGBWW models have a proper white and warm light.
what is that grey long thing that appears at 5:00? and how did you mount it?
I think you are referring to the IKEA SKADIS shelf?
I was here for the pegboard, I would never understand the compulsion to add stripclub lights to everything.
ahahahahah me too
led makes everything better! ,love it might do one too! liked and subbed./
Great idea👍👍
thank you for your tips🙏🏻 I will do it also on my peg board🤩👍🏻
Very nice. I am definitely going to use your ideas to inspire my own set up/video. Thanks!
Great set up!
Look good. Is there room on top for more panels?
Great stuff!!
Amazon link changed and connectors it’s goes to is single color only 😭
Noted, I believe there are quite a few others that have the same number of pins.
Ya - 4 pin led connector by supernight looks right
Great Video thank you very much
Love the set up and the video 😍✌️
what sort of weight to you reckon that pegboard could take? guessing the weak point is the wall anchors?
Have thought about this...wall anchor will determine the main load yes. I wouldn’t push it, as the
pegboard material is just fiberboard and the joint is just a finger screw. I’ve seen a redditor mount a whole set of paintball guns. Those things are relatively heavy? but well distributed.
@@DNChromatic guess when ikea gets them back in stock where i live, ill just have to get one to try it out :) maybe i can screw the metal rail directly into a timber support. If there is a will, theres a way :)
you deserve so much more fame out of this video ❤
Did the hooks come with the board?
I bought the corner pieces but there’s only 2 pins will it still work?
nice video, well done!
Nice project! i love it.
Can you please provide a link or the name to the light bars ?
Here you go Budget Light Wand - geni.us/n8dU
Thanks a lot for the great video! I might skip the LED strips and go for a bigger light behind after providing enough space behind. Trying to collect ideas :)
Looks really good 👌
Can you tell me what thos magnets lights you had in the begining of the vid?
They're actually budget RGB wands I found on Amazon. www.amazon.com/dp/B08CDN7YSM/. But they're not magnetic, I had to add magnets myself.
what is the size of these pegboards?
Cool video well done. Looking at doing something sinilar
Love how clean this looks!
Awesome Video, can you give me a link, or a name for those dope magnetic Lamps which you sticked on the wall at the beginning? 😅
They are actually just budget RGB video light wands . I found them here (affiliate link) geni.us/n8dU. Keep in mind they don't have a built in magnet, I added my own magnetic strips to the back. It's light enough that magnet tape can hold them up. Other video lights with magnet you can search nanlite pavotube
Great vid.. In the planning phase for me now... btw, I had a similar issue with the dots showing a bit more than wanted on the back of a large wall mirror rgb project. Ended up putting spacers behind the mirror and that led to a nice glow with minimal dots showing now. You may want to steal that idea???? ;)
It’s possible. I am looking into some diffusers too.
Thanks for sharing with us.
Brilliant!
looks good but a video tip is to get more focus. its alot of blur and its better to focus on a objekt in video than like your hand holding the item
Definitely. Thanks for the tip.
Maybe use a level first. Sorry it’s my OCD.
I use this to strap my laptop standing up towards the wall, then I have a stationary computer in front of it.]
can't wait to put all my guns on display
tyty
👌💯
No one has ever used the “Music mode” change my mind
“Skådis”
hai sbagliato tutto. I led dovevano essere rivolti di 90° verso l'interno in modo da illuminare tutti i pannelli e i fori avrebbero diffuso luce.
for the love of god bro turn the focus thing off. i got a headache from this because half of the video was blurry
to bad idea XD
What are those 2 led lights you put up at the start of the video ?
Light wands from Amazon. I have a link in my kit.co list. Or you can search light wand photography.
hi could you tell me what the rail things you put on wall to hang peg boards do they come with peg boards and also what are the light hanging on them look like mini light sabers??