I use several of these cheap little guns for my smart repair business, I normally get 6 months to a year out of them and chuck them away. It may sound strange, but their is quite a big difference between one budget gun and another
Finally I find honest on RUclips ITS ALL ABOUT THE PAINTER!!!! If you can afford million dollar spray gun go for it but keep in mind thata not going to make you a good painter.... I use to use ONLY SATA SPRAY GUNS until I bought cheap gun for sealer it was a 150 dollars in 2014 and to be honest I was so impressed with the gun that I started spraying base and clear with the gun and 1 month later sold all my 8 SATAS in my cabinet I only use Protek 5000 for base and 4500 for clearcoat and to be honest with you this are the best spray gun that I had ever use... since then I had try all new spray guns from sata and iwata but i dont think they are any better than my cheap guns
Thank you so much for giving in an honest try. To hear you say the finish turned out flawless is amazing! I've been learning with four cheapo guns, one of which is the one you used here. I see how they do require more careful setup but this is actually beneficial to learning.
No problem at all we did this just to show cheap guns can do the job with proper setup and knowledge although it is harder and won’t last at all for the workflow we have and because of build quality but it can be done
I use Parkside gun from Lidl . Also 10 pounds. Only real issue it has is the clear coat quality. No matter what settings it has some orange peel. For small jobs of paint and primer is very good
that same gun was around a few years ago but now it seems to be improved, the fan is actually way better now. They use the same body but improve the air cap etc.
Mobihel is exactly the same as standox and spies hecker. We have a spies hecker scheme and have a list of the cross reference tinters. I would say that some of the colours have different formulas in the three brands. Believe standox are no long formulating in solvent, and the mobihel have a high pigment range of formulations for low covering colours.
yes im aware its the same as standox and can cross over but i cant agree that it has a high pigment some colours are terrible for coverage but being the budget brand of the brands it what you expect really
Tonys_Refinishing ask your supplier if they have up to date tinters. I did a newish Vauxhall on Friday, two formulas for standard shade but use a different white tinter. I mixed 100ml of both, thought it would be a good idea to compare colours. The HP formula covered in one coat, not sure the other would ever of covered. Ask your supplier to check for you. Noticed a big difference on a lot of silvers.
Doesn't wiping the panel with the tack cloth after painting affect the paint job? or does the paint dry almost instantly? i cant seem to see any smears of paint but surely the paint doesn't dry that quick. Great job by the way im glad if found your channel.
When I did this video it was at the hottest point run the summer last year mate so yeah it really does dry that fast int hay heat the booth was running around 35c at the height of summer last year , and thanks lee for watching and joining us
I bought this gun for no good reason other than it was cheap. Never thought I would find a review on it😅 It's been tossed in the can, but I did a little spraying with it
Hi Tony, I can only afford cheap guns, around £30 because I'm just a hobbyist, but that is not the problem. I don't understand why you would paint and clear coat an alloy wheel without removing the balance weights. Don't you do the inside of the wheel? Even if you don't, when you re seat the tyre it will never be balanced because of movement of the tyre and the paint you have removed and replaced so the existing weights will have to be removed breaking the seal of the paint and clear coat inviting corrosion. I would be pleased to hear your thoughts. Thanks, Mark. IMI High performance wheel and tyre fitters.
Hi mark my answer to that is honest and simple , it’s not my business here and not my call regardless of my feelings about it my hand are tied , personally I totally agree with you but it’s the bosses call not mine
Great video, I know nothing about spraying might I ask what the cloth was you were rubbing the panel down with between colour sprays? As the paint didn't look like it was smearing or rubbing off.. Sorry I'm new to this.
Great video, Tony! I have a question for you.. Can both a Volkswagen LA7W Standox solvent base (+60% of acrylic thinner) and the next 2K anti-scratch clear coat (mixing ratio: 2:1+10% of acrylic thinner) be sprayed with a H-2000 mini gun having a 0.5 mm tip? Or is it required a bigger tip? I have to do only a little spot repair. Thanks a lot!
Спасибо за замечательную демонстрацию. Как заменитель краски в балончиках - он великолепен. Пистолет, который красит лучше пластмассовой крышки балона по цене одного балона с клаской. Для не профи, эпизодических подкрасов прекрасно подойдет.
Hello Tony, great content, probably the clearest and most informative on RUclips! I keep watching the Anglia series over and over simply because I just love watching it! Could you please tell me how many litres of 2k primer and 2k direct gloss this job used? Doors, bonnet and boot included. Also, if you don't mind, could you please tell me how many litres you would have used if you had done a full respray? i.e. interior, underside, engine bay and boot space included. Thank you in advance should you get back to me.
This is a great video for those who don't paint every day and doesn't what to spend hundredths of dollars on a professional spray gun. The job you did was very clean and a the orange peel was minimum that for shore was totally impressive. I kind of liked your final review by dumbing the gun at the trash, very wise decision indeed. Next time using a gun like that try to use a cheaper tipe of vehicle. Lol peace...
Good video tony. Watching makes me realise how much I miss my crappy sealey guns 😂 I got them when I first started in the trade and to be honest once i was a competent painter I used to smash out some awesome finishes with them. But now I'm a devilbiss man through and through 😂
Yes mate one hundred percent but there is a cheaper gun I'm loving at the moment for blow ins and that's the ani r150 great bit of kit for it's price and just have it solely as an alloy gun just as the fans not as big as I'd like for doing say a blow In on a bumper
It would be good to see you do a video of plastic welding on a bumper just to show the diy guys that replacing the bumper isn't always necessary. Just a video I think would be good to see and see how others do it as there's many ways of doing
i dont do much of that tbh mate my main job is prep and paint rather than repairs ect in this new shop not that im not a strong repairer but they need my skills for paint more than anything
Great vid bud, know I'm a bit late to the show. 😅 You reckon this would be any good for water based candy paint and finishing? I'm just looking to mod consoles and controllers and need a wider spray pattern than my usual airbrush.
Good effort into the cheap gun demo.... I just hope this video does not give viewers the WRONG impression on what a cheap gun is good for VERSUS a professional doing a professional job with a cheapy gun lol! These guns have a very short life span even if taken care of properly, and I mean reallly high maintenance just to make it last 1 year with moderate use. From one painter to another, we both know if you made that a (daily sprayer) it would not last 1 year unless it was used for liquid mask to where the gun "rarely" gets taken apart to clean it bcs running water through it does the job. Its the disassembly and cleaning that wares the gun out to the point that the threads do not seal anymore, the seals leak air and the needle wares out at the trigger seal bcs the needle is made of a lesser grade metal than higher quality guns. Im not hating on yo at all lol, My gripe is that you did wayyyy too nice of a job with that cheap gun and toooo many newbies are going to try and paint their car with that gun lol. Still, Great job on the vid but remember your a pro lol and any newbies wanting to learn to paint cars, They are going to need a better gun than that bcs they will be over expecting from that gun and they wont come close to doing what you did...... as a disclosure lol I highly suggest ANYONE whos thinking of painting their car after seeing this vid, guys.... at least spend $100-$150 on a more (USER FRIENDLY) spray gun and it will last you long enough to possibly make some money with a more promising gun.
Well you certainly went to town with that reply mate and not sure if you watched e video all the way through but I did explain every point you just made in that comment , it won’t last it’s cheap and even threw it in the bin at the end not sure if you made it all the way through the video but tbh you’ve just pretty much repeated what I said in the video
Thanks, the, silver painted, bumpers on my VW transporter are kind of crazed due to various bumps ( none by me!) and I would like to re-do them but I'm pretty sure simply painting over will not work well.
Bloody hell mate how could you throw such a high quality gun in the bin, come on Tony it's far superior to the gti pro lite and the likes of the 4600 extreme! you must have loads of money to chuck around 😱🤣 this vid just shows that it's the pro behind the gun that makes a great finish 👊👍 so when are you going to throw one of your Sagola's in my bin? 😏😂
I think you will find it says the same on the Sagola 4600 so if you want I can dispose of all yours just send them over and I will get rid of them for you, I'm just good that way! 🤣🤣😎👍
the quality paint & clear is not cheap. I don`t see the reason to use cheap paint guns due to poor inconsistent atomization. In the end one will pay more in redoing the job not to mention the final quality. yes a pro painter can work with a poor gun due to immediate reaction and tuning of the spray pattern / pressures / distances , but an amator will not deal easy with potential problem related with a poor gun. there are middle price/quality guns like ANI , Airgunsa , DeVilbiss GPi , DeVilbiss FLG5 , etc that can return decent quality and last much longer than any 10 dollar gun :)
This was a review we were asked by viewers to do to compare a cheap gun to our usual expensive guns so diy guys ect could see the difference of what they could achieve at hone if they wanted , by no means does this mean I promote this gun as you would have seen at the end of the video I binned it
Honestly any gun really is to much for that size compressor but you could get away with a small gun like this on one may take abit of letting things charge back up every now and again though
Hi mate been a few years since I made this video but I think your probably referring to the tack cloth mate we use to pick up dust off the paints surface in order to try and keep it clean
after using the gun in this video, are you still using it for something else? because I want to try it, maybe I use it in a small field or don't need a good touch, maybe the gun can be used
Great vid Tony... I've got the GTI Pro Lite with a TE10 1.3, I saw a previous video of yours reviewing the Sagola 3300 GTO 1.3 and was wondering what your opinion would be out the these two guns as the best all rounder gun? Bangin job on that £10 gun 👍 PS. Just subscribed.
Personally I’d go for the sagola mate a lot better built than the devilbiss tbh and with the offer pmpsupplies our sponsors have on of 25% off and sagola product atm they are a cheap gun for the money too , the code of your interested is sagalosale it’s valid till end of March
@@TonysRefinishingTV thanks for the prompt reply. I'm a novice at this and just started out this age old passion of mine at the age of 50 lol. I've only subscribed to your channel and The Gunman, he's the one who inspired me to get back into spraying, but your Sagola review has made me re-think twice about the gun I should have bought. I'll have to wait a while though as I've gotta low start budget. But thanks for your advice, much appreciated mate, and keep up the good work 👌
Hi Tony i have a similar gun 0.8 and want to spray my fiesta wing i have a 50 litre compressor. Can it be done as i have a fear of cocking up Can i use cellulose rather than 2k as doing at home. What did you use in the bottle at beginning to wash boot down. Cheers Tony
50 litre you will struggle even with a mini gun tbh mate, i used panel wipe to clean the boot down and yes you could use cellulose but with a mask you would be ok for a small job like a wing at home buddy
Graham, Sorry I have got to disagree with Tony. The size of the tank is not neccesarily the limiting factor. If the CFM or more accurately the "free air delivery" of the pump is sufficient you can spray anything with any gun. I have done literally hundreds of paint jobs using a compressor with a 50 litre tank but the pump is 14cfm with a free air delivery of something like 11cfm. It's the capacity of the pump that matters mate.
As I do with cheap brushes as they are not worth even trying to clean them. My coach painting brushes, however, are mollycoddled and in a special container.
I know this is an old video.. but I'm just starting out the hard way . Can anyone tell me how do you alter a base coat to make it closer shade to the original vehicles paint job.. my Max Mayer colour as per vehicle paint code is slightly darker.. is it just thin it with blending thinners and do a blend coat beyond the filler repair
You can’t just go off the paint code there are probabky about 5 shades of each colour the best thing is to take a part along with the paint code to a paint supplier to have it matched to the correct shade
Hi Tony here's a suggestion for the next cheapy to review... www.machinemart.co.uk/p/tg2-professional-touch-up-gun/ I use mine as a primer gun, 1.8mm tip, great for high build 2K primer. Regards. Dave
do you mean synthetic non-sand primer (primer sealer)? because I did just that today with that very gun and it sprayed really nice, i did reduce it 4:1.
@@TonysRefinishingTV I was thinking of getting the 3m PPS setup for a cheap gun or devilbiss flg5, I have a 50l compressor and only doing small parts but more waterbased paint
This is a very bad gun..need a lot of effort to achieve a good finish .only a very good painter can achieve a good finish with this gun with lots of effort
![Megan Thee Stallion - Mamushi (Remix) [feat. TWICE] [Official Audio]](http://i.ytimg.com/vi/5c0_u9PsrsQ/mqdefault.jpg)
I use several of these cheap little guns for my smart repair business, I normally get 6 months to a year out of them and chuck them away. It may sound strange, but their is quite a big difference between one budget gun and another
Just goes to show if your good at your job you can make anything work. Good job
Finally I find honest on RUclips ITS ALL ABOUT THE PAINTER!!!! If you can afford million dollar spray gun go for it but keep in mind thata not going to make you a good painter.... I use to use ONLY SATA SPRAY GUNS until I bought cheap gun for sealer it was a 150 dollars in 2014 and to be honest I was so impressed with the gun that I started spraying base and clear with the gun and 1 month later sold all my 8 SATAS in my cabinet I only use Protek 5000 for base and 4500 for clearcoat and to be honest with you this are the best spray gun that I had ever use... since then I had try all new spray guns from sata and iwata but i dont think they are any better than my cheap guns
Thank you so much for giving in an honest try. To hear you say the finish turned out flawless is amazing! I've been learning with four cheapo guns, one of which is the one you used here. I see how they do require more careful setup but this is actually beneficial to learning.
No problem at all we did this just to show cheap guns can do the job with proper setup and knowledge although it is harder and won’t last at all for the workflow we have and because of build quality but it can be done
I use Parkside gun from Lidl . Also 10 pounds. Only real issue it has is the clear coat quality. No matter what settings it has some orange peel. For small jobs of paint and primer is very good
Aslong as it does what you need buddy then that’s fine though
I have one of these ... ! I fill it with thinners to clean my Devillbis !
lol thats gotta be the best reply yet buddy
I kid you not, I do the same exact thing 😂
that same gun was around a few years ago but now it seems to be improved, the fan is actually way better now. They use the same body but improve the air cap etc.
Experience is key you get what you pay for nice job i have tried a few and struggled
Thanks Doug and it just comes down to experience mate that’s all we do this day in day out
Mobihel is exactly the same as standox and spies hecker. We have a spies hecker scheme and have a list of the cross reference tinters. I would say that some of the colours have different formulas in the three brands. Believe standox are no long formulating in solvent, and the mobihel have a high pigment range of formulations for low covering colours.
yes im aware its the same as standox and can cross over but i cant agree that it has a high pigment some colours are terrible for coverage but being the budget brand of the brands it what you expect really
Tonys_Refinishing ask your supplier if they have up to date tinters. I did a newish Vauxhall on Friday, two formulas for standard shade but use a different white tinter. I mixed 100ml of both, thought it would be a good idea to compare colours. The HP formula covered in one coat, not sure the other would ever of covered.
Ask your supplier to check for you. Noticed a big difference on a lot of silvers.
Doesn't wiping the panel with the tack cloth after painting affect the paint job? or does the paint dry almost instantly? i cant seem to see any smears of paint but surely the paint doesn't dry that quick. Great job by the way im glad if found your channel.
When I did this video it was at the hottest point run the summer last year mate so yeah it really does dry that fast int hay heat the booth was running around 35c at the height of summer last year , and thanks lee for watching and joining us
I bought this gun for no good reason other than it was cheap. Never thought I would find a review on it😅 It's been tossed in the can, but I did a little spraying with it
Lol we did it for a laugh tbh just to prove it’s more the painter than a gun
Hi Tony, I can only afford cheap guns, around £30 because I'm just a hobbyist, but that is not the problem. I don't understand why you would paint and clear coat an alloy wheel without removing the balance weights. Don't you do the inside of the wheel? Even if you don't, when you re seat the tyre it will never be balanced because of movement of the tyre and the paint you have removed and replaced so the existing weights will have to be removed breaking the seal of the paint and clear coat inviting corrosion. I would be pleased to hear your thoughts. Thanks, Mark. IMI High performance wheel and tyre fitters.
Hi mark my answer to that is honest and simple , it’s not my business here and not my call regardless of my feelings about it my hand are tied , personally I totally agree with you but it’s the bosses call not mine
Great video, I know nothing about spraying might I ask what the cloth was you were rubbing the panel down with between colour sprays? As the paint didn't look like it was smearing or rubbing off.. Sorry I'm new to this.
We wait for the base to fully dry and then use a tack cloth to remove any dust off the surface
Great video, Tony! I have a question for you.. Can both a Volkswagen LA7W Standox solvent base (+60% of acrylic thinner) and the next 2K anti-scratch clear coat (mixing ratio: 2:1+10% of acrylic thinner) be sprayed with a H-2000 mini gun having a 0.5 mm tip? Or is it required a bigger tip? I have to do only a little spot repair. Thanks a lot!
Tony, can you do a vid on spraying flake. I am spraying my bike fairing and want to use flake.
There’s a video on metal flake on the channel mate
@@TonysRefinishingTV Cheers mate, got a flake gun on your advice, Hope for the best.
Спасибо за замечательную демонстрацию.
Как заменитель краски в балончиках - он великолепен.
Пистолет, который красит лучше пластмассовой крышки балона по цене одного балона с клаской.
Для не профи, эпизодических подкрасов прекрасно подойдет.
I am using this chineese Hvlp spray gun for morr then 10 times but gives me excellent results.
Hello Tony, great content, probably the clearest and most informative on RUclips! I keep watching the Anglia series over and over simply because I just love watching it! Could you please tell me how many litres of 2k primer and 2k direct gloss this job used? Doors, bonnet and boot included. Also, if you don't mind, could you please tell me how many litres you would have used if you had done a full respray? i.e. interior, underside, engine bay and boot space included. Thank you in advance should you get back to me.
This is a great video for those who don't paint every day and doesn't what to spend hundredths of dollars on a professional spray gun. The job you did was very clean and a the orange peel was minimum that for shore was totally impressive. I kind of liked your final review by dumbing the gun at the trash, very wise decision indeed. Next time using a gun like that try to use a cheaper tipe of vehicle. Lol peace...
lol i dont see why i should use one on a cheaper motor if it can put the finish out even if its abit tougher than surely its up to the job lol
To spray car panel, should I use nozzle 0.8 or 1.0 with this gun? What nozzle size is better for painting car?
Love your videos keep up the GOOD work
Thanks man
When you were spraying the clear it looked like the fan was a bit top heavy, still the end result was great 👍🏻
That’s the issue with cheap guns though mate they spray paint in a fashion but that’s about it
my star, 0.8 gun lays it down flat just like that. beautiful mirror finish- just takes longer.
Great review Tony, keep the vids coming.
thanks
Great work.
Thank you! Cheers!
Hi so what is the best gun you can buy for £100 to £150 for spraying panels at home
Low cost gun with strong compressor will make it work for sure
Wy you wiping that cloth over it ? Is that a special cloth for dust or somthing ?
Great video by the way that £10 gun is now £27
Thanks buddy and wow that’s some serious inflation right there a lot of things in our industry have gone up a lot recently
Good video tony. Watching makes me realise how much I miss my crappy sealey guns 😂 I got them when I first started in the trade and to be honest once i was a competent painter I used to smash out some awesome finishes with them. But now I'm a devilbiss man through and through 😂
LOL Had one or two of them myself a very very long time ago haha god dam im so glad weve moved to nicer brands arent you lol
Yes mate one hundred percent but there is a cheaper gun I'm loving at the moment for blow ins and that's the ani r150 great bit of kit for it's price and just have it solely as an alloy gun just as the fans not as big as I'd like for doing say a blow In on a bumper
used one myself mate had one a year or so back there good little guns for sure , i mainly use my sata for wheels these days and blow ins
It would be good to see you do a video of plastic welding on a bumper just to show the diy guys that replacing the bumper isn't always necessary. Just a video I think would be good to see and see how others do it as there's many ways of doing
i dont do much of that tbh mate my main job is prep and paint rather than repairs ect in this new shop not that im not a strong repairer but they need my skills for paint more than anything
Great vid bud, know I'm a bit late to the show. 😅
You reckon this would be any good for water based candy paint and finishing?
I'm just looking to mod consoles and controllers and need a wider spray pattern than my usual airbrush.
Yeah should be ok for stuff like that mate when you’ve got some half decent money to spend though look at an lph80 from iwata
great vid tony , would love to see some wheel touch ups or full recolours .👍👍
Kind regards Simon
wheel video coming next buddy
Good effort into the cheap gun demo.... I just hope this video does not give viewers the WRONG impression on what a cheap gun is good for VERSUS a professional doing a professional job with a cheapy gun lol! These guns have a very short life span even if taken care of properly, and I mean reallly high maintenance just to make it last 1 year with moderate use. From one painter to another, we both know if you made that a (daily sprayer) it would not last 1 year unless it was used for liquid mask to where the gun "rarely" gets taken apart to clean it bcs running water through it does the job. Its the disassembly and cleaning that wares the gun out to the point that the threads do not seal anymore, the seals leak air and the needle wares out at the trigger seal bcs the needle is made of a lesser grade metal than higher quality guns. Im not hating on yo at all lol, My gripe is that you did wayyyy too nice of a job with that cheap gun and toooo many newbies are going to try and paint their car with that gun lol. Still, Great job on the vid but remember your a pro lol and any newbies wanting to learn to paint cars, They are going to need a better gun than that bcs they will be over expecting from that gun and they wont come close to doing what you did...... as a disclosure lol I highly suggest ANYONE whos thinking of painting their car after seeing this vid, guys.... at least spend $100-$150 on a more
(USER FRIENDLY) spray gun and it will last you long enough to possibly make some money with a more promising gun.
Well you certainly went to town with that reply mate and not sure if you watched e video all the way through but I did explain every point you just made in that comment , it won’t last it’s cheap and even threw it in the bin at the end not sure if you made it all the way through the video but tbh you’ve just pretty much repeated what I said in the video
I use these for primer...and contact adhesive. Not for base or clear. I prefer euro pros...they are much better and affordable.
Para pequeños trabajos como llantas , la recomiendas ?
Hello Tony, could you do something about repainting plastic bumpers that have got a bit battered, Ta.
IM SURE I CAN WHEN ONE COMES IN MATE YES
Thanks, the, silver painted, bumpers on my VW transporter are kind of crazed due to various bumps ( none by me!) and I would like to re-do them but I'm pretty sure simply painting over will not work well.
How I wish to learn and be one of you,how and where I can do some course?
Great video mate , so a company called Italco do one of these for £60.00 will that be better than the very cheap version or the same
Not sure mate tbh never used one of theres im afraid
Bloody hell mate how could you throw such a high quality gun in the bin, come on Tony it's far superior to the gti pro lite and the likes of the 4600 extreme! you must have loads of money to chuck around 😱🤣 this vid just shows that it's the pro behind the gun that makes a great finish 👊👍 so when are you going to throw one of your Sagola's in my bin? 😏😂
🤣🤣🤣🤣🤣 it said single use on the box I swear
I think you will find it says the same on the Sagola 4600 so if you want I can dispose of all yours just send them over and I will get rid of them for you, I'm just good that way! 🤣🤣😎👍
Nice video info n ur job awesome
Thankyou
the quality paint & clear is not cheap. I don`t see the reason to use cheap paint guns due to poor inconsistent atomization. In the end one will pay more in redoing the job not to mention the final quality. yes a pro painter can work with a poor gun due to immediate reaction and tuning of the spray pattern / pressures / distances , but an amator will not deal easy with potential problem related with a poor gun. there are middle price/quality guns like ANI , Airgunsa , DeVilbiss GPi , DeVilbiss FLG5 , etc that can return decent quality and last much longer than any 10 dollar gun :)
This was a review we were asked by viewers to do to compare a cheap gun to our usual expensive guns so diy guys ect could see the difference of what they could achieve at hone if they wanted , by no means does this mean I promote this gun as you would have seen at the end of the video I binned it
Why did you clean it right before you chucked it into the garbage?
lol habit i guess mate you get into that routine when your spraying everyday
Good job dude. Would this gun be too much for a Stanley 24ltr compressor from screwfix? Being hvlp.Was looking at lvlp......
Honestly any gun really is to much for that size compressor but you could get away with a small gun like this on one may take abit of letting things charge back up every now and again though
Tonys_Refinishing . The biggest things I am doing is bike tanks and the odd helmet.
Hi Tony great channel very in formative can I ask what the rag was for looked like u where wiping the paint off
Hi mate been a few years since I made this video but I think your probably referring to the tack cloth mate we use to pick up dust off the paints surface in order to try and keep it clean
@@TonysRefinishingTV that’s the one bud does that not disturb the paint?
No as once it’s dry then it’s safe to tack buddy with no issues the key is just making sure you’ve flashed it off enough not rushing ect
Great review Tony, any chance you can do a video on the prep work and spraying of BMW Mini headlight plastic trim surround :)
lol thats abit specific mate haha, is it a chrome surround your looking to paint a different colour?
Yep, looking to paint them black
ok ill see if i can get hold of one mate to paint
Excellent job, well done
Thanks
Let's face it ... Tony could get great results painting with a vacuum cleaner.
Lol that’s funny mate
I just wnt 2 know😅what is the best psi setting for this type of spray gun?
Probably around 35-40psi thee cheaper guns take a lot more to atomise the paint properly
after using the gun in this video, are you still using it for something else?
because I want to try it, maybe I use it in a small field or don't need a good touch, maybe the gun can be used
When I finished this video as you saw at the end it went in the bin , it stayed there
maybe if the item is still there or you keep it, if you are willing to give it to me, for me to try it. ^_^
It went in the bin mate I’m afraid and that was a long time ago too now
oh thank you, sir
Great vid Tony... I've got the GTI Pro Lite with a TE10 1.3, I saw a previous video of yours reviewing the Sagola 3300 GTO 1.3 and was wondering what your opinion would be out the these two guns as the best all rounder gun?
Bangin job on that £10 gun 👍
PS. Just subscribed.
Personally I’d go for the sagola mate a lot better built than the devilbiss tbh and with the offer pmpsupplies our sponsors have on of 25% off and sagola product atm they are a cheap gun for the money too , the code of your interested is sagalosale it’s valid till end of March
@@TonysRefinishingTV thanks for the prompt reply. I'm a novice at this and just started out this age old passion of mine at the age of 50 lol. I've only subscribed to your channel and The Gunman, he's the one who inspired me to get back into spraying, but your Sagola review has made me re-think twice about the gun I should have bought. I'll have to wait a while though as I've gotta low start budget. But thanks for your advice, much appreciated mate, and keep up the good work 👌
Abu Boo Hoo thanks man and also welcome to the channel buddy
Hey tony how u doing cheers from mexico am about to get a new gun and am betwen the iwata w 400 or gti prolite which one u think is the best
W400 is the best all round gun one setup will do everything if you go for the prolite you would need to order extra setups for it to do the same jobs
Thanks tony have a good day
Hi Tony i have a similar gun 0.8 and want to spray my fiesta wing i have a 50 litre compressor.
Can it be done as i have a fear of cocking up
Can i use cellulose rather than 2k as doing at home.
What did you use in the bottle at beginning to wash boot down.
Cheers Tony
50 litre you will struggle even with a mini gun tbh mate, i used panel wipe to clean the boot down and yes you could use cellulose but with a mask you would be ok for a small job like a wing at home buddy
Sorry Tony but are you saying that if i use cellulose and my mini gun i could get away with spraying a wing at home or i'll struggle regardless.
I Mean as in you will struggle with a 50 litre compressor sorry should have been clearer it may just not have enough of a tnak thats all
Ok thanx Tony
Graham, Sorry I have got to disagree with Tony. The size of the tank is not neccesarily the limiting factor. If the CFM or more accurately the "free air delivery" of the pump is sufficient you can spray anything with any gun. I have done literally hundreds of paint jobs using a compressor with a 50 litre tank but the pump is 14cfm with a free air delivery of something like 11cfm. It's the capacity of the pump that matters mate.
I sprayed all my kitchen cabinet doors with this exact spraygun................... and then threw it in the bin!
MARK FINN the wife or the spray gun?
As I do with cheap brushes as they are not worth even trying to clean them.
My coach painting brushes, however, are mollycoddled and in a special container.
I just want to know how to make fake candy paint? Can i just mix base and clearcoat?
Hi no that would be a bad idea you can buy dyes to tint clearcoat instead as a form of candy
@@TonysRefinishingTV its hard to find candy paint in my city we have only 1 panit shop and there paint was limited
Looks good to me bud
I know this is an old video.. but I'm just starting out the hard way . Can anyone tell me how do you alter a base coat to make it closer shade to the original vehicles paint job.. my Max Mayer colour as per vehicle paint code is slightly darker.. is it just thin it with blending thinners and do a blend coat beyond the filler repair
Plus it's a metallic colour... Dark blue... Great video btw
You can’t just go off the paint code there are probabky about 5 shades of each colour the best thing is to take a part along with the paint code to a paint supplier to have it matched to the correct shade
Why did you end up throwing away the spray so well and cheaply?
It won’t last next time it’ll spray worse and worse till it dies
@@TonysRefinishingTV Thank you very much for your help. So what do you think about the auarita H2000 small spray?
A good painter can make a shit gun work.
True buddy
me refiero si tienes un extractor que te mete aire en la cabina y otro que saca
Yameira Moren
Una cabina profesional tiene que tener uno para meter aire ala cabina y otro para sacarlo
This kind of gun, you can find everywhere. It lasts about one job.
yep sure does
Alejandro no yo las e visto y muchas sólo con motor que aporta aire y la salida por el piso
Wow,nice
Thanks buddy
Hola buenas tu cabina tiene uno o dos motores?
No sé lo que quieres decir, pero si te refieres a motores no estoy seguro, ya que este es un stand profesional totalmente sellado
sand blast the gun frame and/or sand and polish it-
I guess with inflation the price is now £29 🙃
The Gunman try it a couple of sec, you paint a couple min, this is a much long review, never be affraid!
never afraid to try something but i know the gun that he was using for that review and i agree with him i wouldnt have used it on that car either
yes and he through it in the garbage, but here we see what it can really do!
£26 as of May 2021
Hi Tony here's a suggestion for the next cheapy to review... www.machinemart.co.uk/p/tg2-professional-touch-up-gun/ I use mine as a primer gun, 1.8mm tip, great for high build 2K primer. Regards. Dave
omg lol hate suction guns lol and thats got a huge tip for whats supposed to be a touch up gun lol
Surprised no one has given you grief for having a vape in a flamable fume heavy environment.
So basically that gun is good if you only paint once in a while I gotcha
Hey Tony
A good spray painter can make a decent finish with any spray gun
This spray gun is junk
it defintely was junk but not any gun i cant agree there some guns have there limits even for the best sprayers
never use plastic primer on it, trust me 😂
lol well its in the bin never to be used again believe me
do you mean synthetic non-sand primer (primer sealer)? because I did just that today with that very gun and it sprayed really nice, i did reduce it 4:1.
That guns £26 now
Not much I can do about that I’m afraid
@@TonysRefinishingTV lol definately I know the videos 3 years old and price goes up, any suggestions for a DIY for a setup? Thanks
Setup?
@@TonysRefinishingTV I was thinking of getting the 3m PPS setup for a cheap gun or devilbiss flg5, I have a 50l compressor and only doing small parts but more waterbased paint
Mate and lph80 if you could stretch to that mate ?
This is a very bad gun..need a lot of effort to achieve a good finish .only a very good painter can achieve a good finish with this gun with lots of effort
2 years later - £23
You can still ger them for £10
£10 for a spray gun lololol insane how is that made so cheep