FR-S BRZ 6 Minute Axle Removal
HTML-код
- Опубликовано: 19 окт 2024
- 6 minutes from tools on to axle out.
The last time I replaced axles, I dropped the diff to gain enough clearance. This time I tried freeing the hub leaving only the toe link and the upper arm in place. Worked great, and could in a pinch be done at the track by jacking up one side of the car at a time.
Tools used:
10mm socket for abs sensor
12mm socket for brake line bracket
17mm sockets and wrenches for the arms
32mm socket for the hub nut
hammer and 1" brass pin
Pry bar
I've replaced the axles in the past but
Assembly is reverse of disassembly (but a much bigger PITA)
Great video! Here from drivingdaily New subscriber!!
Nice! Really I just wanted to see how fast I could pull an axle.
Just subbed, drivingdaily sent me over to you ✌🏻✌🏻✌🏻
Axle! Nice work...💪