How to Replace Sway Bar Link 2000-2005 Buick LeSabre
HTML-код
- Опубликовано: 21 окт 2024
- Buy Now!
New Sway Bar Link Set from 1AAuto.com 1aau.to/ib/1ASF...
New Sway Bar Link from 1AAuto.com 1aau.to/ia/1ASS...
Sway bar links connect the sway bar (stabilizer bar) to other suspension components. They have a movable joint that can be damaged or wear out over time. When that happens, the joints get loose, and rattle. This video shows you how to install new TRQ sway bar links on your 2000-2005 Buick LaSabre.
This repair was done on a 2004 Buick LeSabre Limited 3.8L and the process should be similar on the following vehicles:
2000 Buick LeSabre
2001 Buick LeSabre
2002 Buick LeSabre
2003 Buick LeSabre
2004 Buick LeSabre
2005 Buick LeSabre
Tools you will need:
• Pry Bar 1aau.to/op7/1AX...
• 14mm Wrench 1aau.to/ora/1AX...
• 15mm Socket 1aau.to/o2n/1AX...
• 19mm Socket
• 1/2 Inch Impact Gun 1aau.to/ofb/1AX...
• Socket Driver
• Torque Wrench 1aau.to/oGA/1AX...
• Gloves 1aau.to/ohZ/1AX...
• Paper Towels 1aau.to/ojt/1AX...
Subscribe: / @trq
Check out our playlist:
Buick LeSabre 8th Gen 2000-2005: • Buick LeSabre 8th Gen ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Definitely not the link to the exact part
It's very helpful to put a jack underneath the control arm and raise that up. This will push the whole link assembly up so that you can see enough of the threads from the bolt exposed for the nut to grab.
Another tid bit folks. Before installing the sway bar link. Give the bolt a good coating of grease or brake lube. It'll add years to those links ;)
I love how this channel is so professional and safe but my guy just throws a chrome socket on an impact 😂 1:00
How do I know if I need new sway bars?
What is the correct ft/lbs?
What to do with no nut, they’re just missing
Cost for sway bar for 2003 buick lesarbe limited
I am asking for the price
I went to change my oil sending switch and saw the sway bar link with the top missing and I was like 💀💀💀💀
Guy in video does not know how to torque lug nuts. His method can cause uneven tension. Always loosen each nut slightly below the target torque pressure and then tighten to the correct ft lbs. If you don’t loosen first it’s entirely possible to have a lug nut tightened well beyond your target goal ft lbs and the torque wrench clicks off at the correct number when in truth it doesn’t tell you that you’re way too tight.
Can you explain what you mean by tighten to correct ft lbs?
Isn't double clicking bad? 😅😂
O