I'm halfway through and wondering if it's worth it to watch the rest of this to see if you figured out how to use this. The two most important buttons, you ignored. Health report and system selection. That's where everything you are looking for is. Secondly, the mall is not based on what is installed in your device. Walmart doesn't just carry things you don't own. Same here. Those things are for other devices that don't come with them, not for yours which has the stuff you said it doesn't. Maybe if you update it first, you'd see it all. Now if I bail and you figure it out, just know that I don't have a lot of patience.
posso capire dove sbaglia ? ho lo stesso problema , non riesco ad entrare in diagnosi ( del cambio automatico ) della mia auto . mi da errore come nel video
I have a launch X431 V Pro, it works fine on the Asian and Euro cars but can't say for the American cars. I was thinking of upgrading to the pro 5 but now am thinking twice. Thanks for the review
I myself have the launch x 431v+ pro elite and love it. I noticed while you're using the profile you're saying you can't perform any actuation tests or special functions and you didn't realize or see while you're making the video that your modules are saying not equipped you either have a bad wire on the car or you're not connected right with the scanner that's why you can't have access to anything check your car out and make sure all your connections are proper and you'll be able to utilize the scanner as intended
No I was able to connect with the xtool d8 and it worked also for a lot of the thing I can do with the d8 like power balance and actuation test they were all free I didn’t have to pay an extra 108-200
I could do all that with my x431v+pro elite also out of the box. Make sure all updated. Also there are stuff that is in the mall that is already on the unit. I don't know about the Tesla but I have clicked and try to purchase some of them and it actually told me I already have the software. Lol out of the box.
And also every single my autel my snap-on and my launch when I hit common functions a lot of times it doesn't give all the functions. I always go to each module especially if I want to deal with lights and stuff like that. I go to the body module where the lights and everything should be. Try it that way. I guarantee you could do the lights. If they're electric lights you could turn lights on on your dash. I've even opened up and lowered on a 2008 enclave hatch. It's all there you just got to find it
@@johnlove5310 no I know you can go to the correlating modules but the issue I had is it would say the function was not available I know the pro 5 was more or less made for over seas vehicles either was the model I tested was pretty bad….. I ever tried cheaper brands like ancel and they seemed to work better
I just noticed as well your check engine light isn't illuminated in the on key position meaning your vehicle is not communicating. It's not the scanner it's your car
The fact that the VCM wasn’t powering up off of the DLC should’ve been a big red flag. Seems like someone needs to go back to the basics before getting a powerful scan tool.
I'm a professional tech doing full time diagnostics and programming.. Don't let this video turn u off to this tool. While I appreciate the effort taken to provide content, this video is full of misinformation and user error. Fact is the launch/thinkcar etc x431 based scan tools are among the best/highest functioning scan tools avail for the money. I use this exact tool daily and can't recommend it enough. No tool is perfect but this one is a must have.
amico ho lo stesso problema che si presenta nel video , non riesco ad entrare in diagnosi del cambio auotomatico . mi da lo stesso errore .. mi sai dire per quale motivo ?
Thanks for the effort. When I read through their high dollar offerings they didn’t say much about American-made vehicles. They seem to be focused on the Asian market. The whole idea with scanners of not knowing what you’re gonna get until you buy it is a bunch of BS. Send that baby packing back to where it came from. When a potential customer asks ‘can you do such and such?’ Any the reply is ‘maybe’. Game over!
Yes I asked questions over and over and asked hey are these bi directional options included I always got some half as answer and to be completely honest you would spend so much money just to get the functionality of a $200-500 scan tool
@@dieseldawg7132 I feel your pain. Since my last visit to your video I came across a Topdon USA Professional Series website with more information then you’ll normally find. For myself, now I know this technology will not deliver what I need.
I wish there was more in depth youtube reviews of those who did buy the scanners. One thing that does upset me though is that almost all of these aftermarket scan tools are Chinese, meaning partial bias, poor compatibility, but affordable-ish… Unless you buy MAC or Snap-On but that is way out of my range (in my case as a DIY/Hobbyist).
Thanks for your efforts. I got one 4 years ago and always was in a dark place with it… when trying to get info or training, I found out it was mad for the American Market 😵💫 I bought a new subscription some of the things are there but I’m still looking for the CYLINDER BALANCE TEST! A basic function should be free like it was when I first got it 😒 maybe we should them to get it together or no USA market😤 The may have just canceled my subscription 😂😂😂 Thanks for the second opinion.
Was watching just to see if you would figure it out lol. I have x431v+ and expired subscription and it still will do most bi directional controls. Only issue I have had was stallantis sgw issues with new rams. Paid for autoauth to hook up and still need to renew dodge Chrysler for it to read dtc or gain access to bi directional. Also tried with 12+8 and still won’t allow me to had to renew service for those. With it expired it would still connect and read my 17 ram 3500. So for those of you looking yes it works and does a good job of it. Though I did have to use for scan to calibrate a valve body on a 6.7 ford
😂 Come on man. The VCM won’t power up off of the data link connector and no communication with the PCM should tell you that there is an issue on the vehicle side not the scan tool.
After lots of research I’ve decided to go with the Launch Pro3S+ scan tool. It does everything the Launch V+ 4.0 does along with having double the processing power (octal - core ie 8-cores compared to the quad-core ie 4-cores in the V+). My use-cases may be different than yours though so definitely check it out.
I HAVE A LAUNCH X431 V PRO ,,, BUT I CAN'T BELIEVE THAT LAUNCH WOULD MAKE ANYONE HAVE TO PAY FOR THOSE SPECIAL FUNCTIONS. BECAUSE WHEN THE TIME COMES FOR ME TO UPDATE MY SCAN TOOL IF THIS REMAINS THE CASE I WOULDN'T BE BUYING A LAUNCH !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Is this your first scan tool? Why didn't you do the updates before craping on the tool. My x431 pro v+ has all those options you said were missing. I didn't have to have a power cord to use. As mentioned by other posters you don't have the key interests on position. Snap on fan boi.
I was thinking about a launch but I saw in the comments on amazon that they like to nickle and dime you on the special functions... I assumed it was just on the low end model (which fair enough) but nickle and dime you on a 1800$ plus charging you for scan tool to be update.... is robbery...
Snappy on is to dam expensive and American scanner companies are restricted in giving all newer vehicle systems. It’s hit or mis because the dealers will not allow snapon to have everything to keep the new car dealer shops happy.
Yes I’m not very impressed with launch either I have tried other scan tools that are a bit better for American makes, currently uploading a video on the Ancel V6 pro, a lot more functionality… check it out it will be up very soon.
What is tyre called in English? Thank you for the vid. Also, tyre would be correct. "tyre" is (Commonwealth English= England) or "tire" (North American English)
It is indeed a shameful and surprising thing, and what is strange is that other companies provide most of these programs integrated and free of charge with updates, and there are also copied, cheap and even free programs that perform most of the tasks. It seems that this company and its counterparts are asleep in the honeymoon.
good quality elm 327 and a good odb2 app is all you need really for most cars, newer stuff like 2015+ you might need the xtools dongle or launch dongle paired with a good tablet
@@educationaltvshows9950 you sure about that, launch clones like diagzone or xdiag or prodiag has special functions and i have those paired with my Samsung tablet i have multiple odb2 dongles and they have topology
Mate you have a brick that will try to lock you out when your free updates end. Ive have mine for 2 years, I was offered the world and like you got very little in return. Even with the most common vehicles, functions like writing new injector codes etc is not available ('not within range"). Am I going to pay for another 2 years of updates that still wont function? You gotta be joking!
@@antonioespinoza7526 which scan tool are you asking about? The 431 pro 5 was more for Asian cars not that great for the American fleet and diesel was extra money….. as far as the D8 it doesn’t do commercial diesel.
I have launch diagun and upgraded to x431 v+ they said upgraded version. Their is no upgraded any launch scantool they are all they function and limited to access mostly american vehicles. Mostly modules are not supported and you cannot much program keys and keyfob in this scantool you have to buy another piece garbage xprog to do key programming if does do programming. This is too much price for this kind of scantool.
are you a comedian?. Watching this video gives me a headache and sympathy. you don't seem to know how to use the whole tester, but you still make a video about it? ashamed for you. you really don't have to pay separately for the functions, and all the necessary functions can be found if you use the tool correctly.
Be real man! You dont even know how to use it. I own the same scanner and been using it for quite a time now.even bought the x-prog3 now and started programming with it. As for functions you need to enter each module separately to use the functions related to it.
deve installare tutte le patch e aggiornamenti ? altrimenti non funziona ? ho lo stesso problema . ho installato tutto ma non mi comunica non rientro ad entrare nel cambio della mia ferrari 360 modena .
Jesus what a waste of time. Glad i forwarded through most of this. Let's find someone who doesnt know how to use the device at all and have them do a "review" ... great idea... NOT🤦♂️ Seriously, delete this video 😆
I'm halfway through and wondering if it's worth it to watch the rest of this to see if you figured out how to use this. The two most important buttons, you ignored. Health report and system selection. That's where everything you are looking for is. Secondly, the mall is not based on what is installed in your device. Walmart doesn't just carry things you don't own. Same here. Those things are for other devices that don't come with them, not for yours which has the stuff you said it doesn't. Maybe if you update it first, you'd see it all. Now if I bail and you figure it out, just know that I don't have a lot of patience.
He sent it back to the retailer because he hasn’t got a clue what he’s doing lol😂
posso capire dove sbaglia ? ho lo stesso problema , non riesco ad entrare in diagnosi ( del cambio automatico ) della mia auto . mi da errore come nel video
I have a launch X431 V Pro, it works fine on the Asian and Euro cars but can't say for the American cars. I was thinking of upgrading to the pro 5 but now am thinking twice. Thanks for the review
I myself have the launch x 431v+ pro elite and love it. I noticed while you're using the profile you're saying you can't perform any actuation tests or special functions and you didn't realize or see while you're making the video that your modules are saying not equipped you either have a bad wire on the car or you're not connected right with the scanner that's why you can't have access to anything check your car out and make sure all your connections are proper and you'll be able to utilize the scanner as intended
No I was able to connect with the xtool d8 and it worked also for a lot of the thing I can do with the d8 like power balance and actuation test they were all free I didn’t have to pay an extra 108-200
I could do all that with my x431v+pro elite also out of the box. Make sure all updated. Also there are stuff that is in the mall that is already on the unit. I don't know about the Tesla but I have clicked and try to purchase some of them and it actually told me I already have the software. Lol out of the box.
@@johnlove5310 could you upload a video because this one the pro 5 really sucked
And also every single my autel my snap-on and my launch when I hit common functions a lot of times it doesn't give all the functions. I always go to each module especially if I want to deal with lights and stuff like that. I go to the body module where the lights and everything should be. Try it that way. I guarantee you could do the lights. If they're electric lights you could turn lights on on your dash. I've even opened up and lowered on a 2008 enclave hatch. It's all there you just got to find it
@@johnlove5310 no I know you can go to the correlating modules but the issue I had is it would say the function was not available I know the pro 5 was more or less made for over seas vehicles either was the model I tested was pretty bad….. I ever tried cheaper brands like ancel and they seemed to work better
I just noticed as well your check engine light isn't illuminated in the on key position meaning your vehicle is not communicating. It's not the scanner it's your car
The fact that the VCM wasn’t powering up off of the DLC should’ve been a big red flag. Seems like someone needs to go back to the basics before getting a powerful scan tool.
@@Jpilgrim30 yeah it looked like he didnt know what he was doing.he was looking for stuff thats on the activate section over on the function side.
@@frankyv5999 ya really he was wanting to honk the horn
I'm a professional tech doing full time diagnostics and programming.. Don't let this video turn u off to this tool.
While I appreciate the effort taken to provide content, this video is full of misinformation and user error.
Fact is the launch/thinkcar etc x431 based scan tools are among the best/highest functioning scan tools avail for the money. I use this exact tool daily and can't recommend it enough. No tool is perfect but this one is a must have.
Does this device do ECU tuning?
amico ho lo stesso problema che si presenta nel video , non riesco ad entrare in diagnosi del cambio auotomatico . mi da lo stesso errore .. mi sai dire per quale motivo ?
Thanks for the effort. When I read through their high dollar offerings they didn’t say much about American-made vehicles. They seem to be focused on the Asian market. The whole idea with scanners of not knowing what you’re gonna get until you buy it is a bunch of BS. Send that baby packing back to where it came from. When a potential customer asks ‘can you do such and such?’ Any the reply is ‘maybe’. Game over!
Yes I asked questions over and over and asked hey are these bi directional options included I always got some half as answer and to be completely honest you would spend so much money just to get the functionality of a $200-500 scan tool
@@dieseldawg7132 I feel your pain. Since my last visit to your video I came across a Topdon USA Professional Series website with more information then you’ll normally find.
For myself, now I know this technology will not deliver what I need.
I wish there was more in depth youtube reviews of those who did buy the scanners. One thing that does upset me though is that almost all of these aftermarket scan tools are Chinese, meaning partial bias, poor compatibility, but affordable-ish… Unless you buy MAC or Snap-On but that is way out of my range (in my case as a DIY/Hobbyist).
Thanks for your efforts. I got one 4 years ago and always was in a dark place with it… when trying to get info or training, I found out it was mad for the American Market 😵💫 I bought a new subscription some of the things are there but I’m still looking for the CYLINDER BALANCE TEST! A basic function should be free like it was when I first got it 😒 maybe we should them to get it together or no USA market😤 The may have just canceled my subscription 😂😂😂 Thanks for the second opinion.
NOT LAUNCH FOR THE USA, ONLY FOR EU! The seller should’ve informed you about that
Was watching just to see if you would figure it out lol. I have x431v+ and expired subscription and it still will do most bi directional controls. Only issue I have had was stallantis sgw issues with new rams. Paid for autoauth to hook up and still need to renew dodge Chrysler for it to read dtc or gain access to bi directional. Also tried with 12+8 and still won’t allow me to had to renew service for those. With it expired it would still connect and read my 17 ram 3500. So for those of you looking yes it works and does a good job of it. Though I did have to use for scan to calibrate a valve body on a 6.7 ford
😂 Come on man. The VCM won’t power up off of the data link connector and no communication with the PCM should tell you that there is an issue on the vehicle side not the scan tool.
Oh wow. I was thinking about getting that. I have a XTool D8. I was going to get a bigger, more professional tester.
After lots of research I’ve decided to go with the Launch Pro3S+ scan tool. It does everything the Launch V+ 4.0 does along with having double the processing power (octal - core ie 8-cores compared to the quad-core ie 4-cores in the V+).
My use-cases may be different than yours though so definitely check it out.
I HAVE A LAUNCH X431 V PRO ,,, BUT I CAN'T BELIEVE THAT LAUNCH WOULD MAKE ANYONE HAVE TO PAY FOR THOSE SPECIAL FUNCTIONS. BECAUSE WHEN THE TIME COMES FOR ME TO UPDATE MY SCAN TOOL IF THIS REMAINS THE CASE I WOULDN'T BE BUYING A LAUNCH !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Is this still the case
You need the Red Launch the Black one isn't for American cars but the red one is
Is this your first scan tool? Why didn't you do the updates before craping on the tool. My x431 pro v+ has all those options you said were missing. I didn't have to have a power cord to use.
As mentioned by other posters you don't have the key interests on position. Snap on fan boi.
cause he doesnt know what hes talking about
I think he did prior to using it Gee
Your vehicle obd port has an issue or your key is not turned to ON position. You dont need to connect to the cigarette lighter port to power up.
I just got one and it comes with 2 year free updates.
Until you hit the mall nothing is with the free two year update
I was thinking about a launch but I saw in the comments on amazon that they like to nickle and dime you on the special functions... I assumed it was just on the low end model (which fair enough) but nickle and dime you on a 1800$ plus charging you for scan tool to be update.... is robbery...
Thanks for your advice I was thinking about buying one but I change my mind
For a professional shop setting everybody that we deal with stays with autel, there must be a reason.
The main reason is they get them on a truck and are able to make payments.
Awesome. This is the kind of information that people appreciate. Please keep us updated. Keep away from Crappy unboxing videos.
what scanner would you recommend for the price range of $800-1700 ? thanks bro for making the video
He needs the truck pack
Thanks, Find the same thing but not as bad with my X Tool.
you can program keys also
BUYER BEWARE LAUNCH DOES NOT HONOUR IT'S WARRANTY
Sent it right back thank you for your imput
Snappy on is to dam expensive and American scanner companies are restricted in giving all newer vehicle systems. It’s hit or mis because the dealers will not allow snapon to have everything to keep the new car dealer shops happy.
This launch x431 is amazing good but just for European cars not USA
I just buy the x431 pro 3s + that very slow data respond compare with my old Gscan2
Yes I’m not very impressed with launch either I have tried other scan tools that are a bit better for American makes, currently uploading a video on the Ancel V6 pro, a lot more functionality… check it out it will be up very soon.
U should got the one with no ip restrictions
Can this be used to reprogram used toyota keys?
Snap on Scanner WORKS Every time.....just saying.
How to change the mileage with the tablet thank you
So I have the x431 diagun v. I was excited to upgrade to this one but I don't know now. What do you think?
Sorry just seen this honestly I wouldn’t at all I think this is more or less for the European market, not the greatest for American cars !
@@dieseldawg7132 I went with the x431 pro 3s +
@@theone9564worth the upgrade?
posso sapere dove sbaglia ?
ho lo stesso problema
sono un principiante .
fatemi sapere
Wow! That is really sad 😔
$1,800 and rarely works super sad 😢
when you did your update did those features from the mall become available?
Is their anyway to verify mileage with this tool?
Will it do a running power balance
think tool Pros have 34 special functions you can do coding much better scan tool for half of that price
What is tyre called in English?
Thank you for the vid. Also, tyre would be correct. "tyre" is (Commonwealth English= England) or "tire" (North American English)
ma poi hai risolto il problema ?
Does it do throttle relearn for Honda accord?
It is indeed a shameful and surprising thing, and what is strange is that other companies provide most of these programs integrated and free of charge with updates, and there are also copied, cheap and even free programs that perform most of the tasks. It seems that this company and its counterparts are asleep in the honeymoon.
My man doesn’t know how to use a diagnostic tool at all 😂
good quality elm 327 and a good odb2 app is all you need really for most cars, newer stuff like 2015+ you might need the xtools dongle or launch dongle paired with a good tablet
Obd app wont get you half the modules, half the livedata or even half special functions a few hundred tablet will do!
@@educationaltvshows9950 you sure about that, launch clones like diagzone or xdiag or prodiag has special functions and i have those paired with my Samsung tablet i have multiple odb2 dongles and they have topology
@@educationaltvshows9950 k
🤷♂️🤦🏻♂️🤦🏻♂️🤦🏻♂️🤦🏻♂️ LMAO 🤣🤣 THIS REVIEW IS JUST LIKE THE ONE I DID LOL I'M NOT TOO FOND OF LAUNCH ANY LONGER
I got way more functions to work on a $200 xtool a30m and that’s a damn shame!!!!! I can’t believe it’s advertised for American cars…
@@dieseldawg7132 yes sir I know the feeling my launch pros mini has been badass but the more expensive ones suck!!!
@@dieseldawg7132 ruclips.net/video/zCGVku5XKBc/видео.html
@@SMOKEY-JAYS-DIESEL the other day I heard someone make a great comment they said the more you spend the less you get! 😂
@@dieseldawg7132 lmao very true haha 🤣 🤣
Does this do ECU tuning?
do you want to sell it, if yes I want to buy it. do you agree
Mate you have a brick that will try to lock you out when your free updates end. Ive have mine for 2 years, I was offered the world and like you got very little in return. Even with the most common vehicles, functions like writing new injector codes etc is not available ('not within range"). Am I going to pay for another 2 years of updates that still wont function? You gotta be joking!
Mate you haven’t got a scooby doo how to use it 😮 you need a Walmart 10 bucks reader
How much is it??
$1800 way to much for what it does check my video on the d8 x tool
@@dieseldawg7132 work for diesel toyota and china? version latinoamerica
@@antonioespinoza7526 which scan tool are you asking about? The 431 pro 5 was more for Asian cars not that great for the American fleet and diesel was extra money….. as far as the D8 it doesn’t do commercial diesel.
@@dieseldawg7132 X431 5 PRO
A perfect tool to corrupt your car. Disconnect asap. Thanks for posting this.
Hella gutmann users maybe here ?
I have launch diagun and upgraded to x431 v+ they said upgraded version. Their is no upgraded any launch scantool they are all they function and limited to access mostly american vehicles. Mostly modules are not supported and you cannot much program keys and keyfob in this scantool you have to buy another piece garbage xprog to do key programming if does do programming. This is too much price for this kind of scantool.
Is this worth buying???
Damn that's enlightening and annoying at the same time.
I think this guy is more of a tool than the scanner is! 😂. Totally clueless.
are you a comedian?. Watching this video gives me a headache and sympathy. you don't seem to know how to use the whole tester, but you still make a video about it? ashamed for you. you really don't have to pay separately for the functions, and all the necessary functions can be found if you use the tool correctly.
Lmao was feeling the same way
Man u got tons of functions but u don't know how to use it 😂
This is a piece of sheite for that amount of money.
I think you don't have a clue about this scanner.
Not every tool works on every car .... You mega tool may do a cheap car & your cheap reader may do a mega quality car 😂...... Play with it & learn.
Be real man! You dont even know how to use it. I own the same scanner and been using it for quite a time now.even bought the x-prog3 now and started programming with it. As for functions you need to enter each module separately to use the functions related to it.
How do you do that trying to figure it out
deve installare tutte le patch e aggiornamenti ? altrimenti non funziona ?
ho lo stesso problema .
ho installato tutto ma non mi comunica
non rientro ad entrare nel cambio della mia ferrari 360 modena .
Chinese junk for the money you should get all the subscription spend the money and get something that has all applications
Your lost..
X431 pro5👎
Jesus what a waste of time. Glad i forwarded through most of this. Let's find someone who doesnt know how to use the device at all and have them do a "review" ... great idea... NOT🤦♂️ Seriously, delete this video 😆