▶▶ Link to recommend vendor amzn.to/4dguIhm 👉 10% CODE: 6MLP39HN ▶▶ Link FCA bypass cable amzn.to/4diaQut FCA 12+8 Cable Some cool information about FCA AutoAuth www.fcarusa.com/TechSupport/HowTo/how-use-chrysler-bypass-12-8-cable-2018-chrysle
Great Review, i have the Launch X431 v3 which is bigger and has the wireless docking port. That annoying sound is there to remind you to remove the wireless vci and put it back into the docking port. One thing i did find when my 2 free years of updates expired and i did not renew as i only need to go to 2023. If you want to keep using the Launch after the expiry date then you have to log in to your account once a month to enable you to keep using it. Its just their chance to upsell you an update but it did catch me off guard when i went to a friends car that was in a parking lot and i was not able to use the tool as it wanted me to log in. Once i did, all was good. It works well on GM vehicles and when i need more horsepower i use the VCX Nano with GDS2. Lastly in order to use the Launch on GM when using it in Bi directional mode such as special tests, the Vehicle needs to be in service mode otherwise you will get no reading from the scan tool. This applies to GDS2 as well so its not a Launch bug. Keep up the great reviews.
Hello again.Last night my mechanic managed to get the fuel to the rail,finally,measured the fuel pump,3b constantly,so pump now works,he found the fuel pump relay had one of the sockets disconected and lost within the cable forest under the dash,but still didn t fire up.Today starts measuring if there s tension in the injectors.Hope to at least detect the problem today.
Your wish was already recorded, I left a link in the video description ruclips.net/video/uVVCs_zENxI/видео.htmlsi=Ti3Av90CiXCpOGzh Now you only have 2 wishes left
Nice review. I was looking at this one, but went with an autel mx808bt for the wireless vci. I wasn't too worried about initial price, but wanted something with a reasonable update cost and the tier above these models is significantly more expensive per year without adding much functionality
Yes, 200 to 300 is a good price, the best scan tool in that range is this ruclips.net/video/QKNp2bFYcVI/видео.htmlsi=MTjX_VkFfXFIBHhq Add it to your cart and wait for prime day or Black Friday. It comes with 3 years of updates. This x431 pro elite probably won’t make it into the $309 range. Thank you for the feedback about the tool grade.
@@Bluebajanot every 2 years, every year after first 2 years expire, IF you want to stay current with updates. According to Launch x431 you don't have to buy updates and you can keep using the tool as is.... who would buy it otherwise at 250 a year for two years. You may need to log in to your acc every month as someone reported in comments, but I am not 100 %sure on that yet, best ask Launch x431 themselves.
I think it a 8 inch and it should work on really new vehicles. The newest vehicle I used it on was a 2020. Most people don’t work on 2024, 2023, 2022 vehicles as they are under warranty.
Curious what is the highest rated one you've done? I've been looking for the best features and good value. Getting into these fancy ones prices go from reasonable to you must be kidding lol.
For the money Xtool D7s and just know it's always changing as the tools get better and cheaper but the renewal fees for updates continue to climb. That's why I like some the Xtool as they come with 3 years of updates and even if you don't renew you can still use the tool but you will not get additional updates. Unless you are using it for work, it is a good choice for DIY home mechanics.
Honestly, is doesn't really matter. The only place where you can fix a car with a scan tool is youtube. A scan tool can't tell you what's wrong with a car, and it certainly can fix one. Hopefully, it can give you some information that will point you in the right direction. And yes, I know you can get lucky and get a very specific code, buy a part, and it fixes the issue. Most of time that doesn't happen. In the real world, once you put the scan tool down, your real diag starts. If you buy a Walmart scanner for $50-$100, a good DVOM (A multimeter is the tool you're really going to use to diag and repair the vehicle. Never get a cheap one.), the workshop manual and wiring diagrams for your vehicle (or a service like AllData), and a good assortment of diagnostic hand tools, like test leads, wire probes, etc,..., you can do 50x more than if you went out and bought a $2000+ scanner. Bi-directional, in most cases, is for convenience. It can save you some time, but its very rare that you can't fix a problem without the use of a bi-directional scanner. For example, something in your door lock/latch system isn't working. Its a very common problem. You can make a living just doing door latches. Sure, its nice to be able to access parameter identifiers for the door lock and related controls, but what do you do if your ID for the lock/unlock switch doesn't activate the lock? You still have to take the door apart. You'll need the manual and tools for that. You have to check the switch, latch, and all related wires. You'll need your DVOM and wiring diagrams for that. The scan tool maybe gave you a dtc for your door latch, or it just doesn't work and you don't even have a code. At best, you were able to play around with the bi-direction function on your scanner, but you didn't use it to fix your car. Most of the time, that's how it works.
It's so confusing to know which models from Launch do what. There's like a couple dozen versions all for sale at once in 2024. Trying to find info on a CRP 919C that is just released, but the ad does not specify "X431" anywhere.
I like the d7s ruclips.net/video/QKNp2bFYcVI/видео.htmlsi=f8ExiPKEeDbcD_Y6 but if you have a fca vehicle that is 2018 and newer i would get the launch with the bypass cables. If you don’t own a fca vehicle vehicle the d7s d7w are amazing
Hey there.Nice thing to do,this review of the launch tool.Very usefull.Can i use this tool to find out why a MX5 Nb from 2001 cranks but doesn t start?
It can help be part of the solution, but scan tools cannot pin the exact cause unless you know what you are looking for. With a crank no start it’s a process of elimination. Spark Fuel Compression are major and then you need to confirm the vehicle sensors are being read and detect. Other factor, security systems, slow crank. Timing, vehicle history I first put it load tester, test the battery, then I start checking for fuel ( easy, just spray starting fluid into into after the mass air flow sensor) I check for spark( they sell spark plug test lights for $5) And last I check for compression. Start with the battery, see link in short ruclips.net/video/VeNT94t1hIU/видео.htmlsi=Osmk2pOvZH-R6Umd Just because it cranks doesn’t mean anything, Good luck and keep me posted.
I have checked spark,it s there,sensors are good both cam and crankshaft,fuel pump makes noise,but i don t get fuel in the injector ramp or rail.Relays tick when put to the battery.Car worked flawlessly till 3 weeks ago,when it didn t start on the first key in the morning,but at the second key went on ok.A week later after this symptom occured,no start at all.
Is this the North American version or European. My understanding is if it's not the North American version you cannot update through Launch USA. Lauch USA has a list of serial numbers and if yours isn't on the list it needs to be dealt with in China and that goes for warranty issues also. Please correct me If I am wrong. I got this info from Launchs website in Canada.
Very well true I contacted Launch USA with questions about the scanner and my cars and they informed me that they do not sell any scanner on Ebay or at Amazon. They also told me that the scanner will never work as intended because they are not made for the USA market, they pointed to their Products page and their Storefront page. So I almost bought one, as they told me that there will be no warranty or updates, that whoever I bought from will be my contact point to obtain support and whoever is selling them or distributing them at Amazon is not an authorized USA dealer or distributor. They are buying them overseas and reseling them on Amazon. I have the email from Launch USA to prove it. I did not buy the scanner.
I reviewed their earlier products and just feel the quality is not there yet. Look something like instead ruclips.net/video/mf5zDmiEpe8/видео.htmlsi=jbWGMuy2jCkFaZX5 lifetime updates Or this ruclips.net/video/QKNp2bFYcVI/видео.htmlsi=LMusF1Vh4OU7EXiV Go with wired connections as they are cheaper and more reliable.
The d8w is my preference. Here is my review of the d7w ( same thing but smaller) ruclips.net/video/yo_oQ9zS04E/видео.htmlsi=m_WUKv2HtKrHmPpH Best the easier menu system I life the fact that Xtool can be used even after the updates expire without being a brick . You just will will not get any more updates but it will still function.
Hi I have a 2021 Acura TLX and my car needs a Telematics control unit and a new transmission. Which one do you recommend that can program both especially the telematics with the vin of the car. I have the small orange one but that one only helps fixes lights on the dash.
PLEASE show text screens LONGER. They flash so fast we don’t have time to read them with the shadowed fonts with lines going everywhere. Otherwise, good info.
This is best odometer calibration ruclips.net/video/mf5zDmiEpe8/видео.htmlsi=x06Z8vjOWmVPucTm but it limited to adjust to adjust 10k km but you if can do it 8 times which is equal to 80k km. This one has unlimited km adjustments ruclips.net/video/VVfRnyKq8Cs/видео.htmlsi=GH8G8ErO5YMWvgEU but is not very accurate. The odometer is stored in km and converted to miles. This does not work on all vehicles.
Yes, it can make keys but not all keys. It’s pretty easy and here is a video I recorded just to show how easy it is. ruclips.net/video/eO6eAkUjwHg/видео.htmlsi=vPuL-sz2fLJFhP-4 Takes less than 5 minutes per key.
@@RANDOMFIX Oh thank you. I was going to send it back to Amazon unopened. Then, find a honest key maker. I am still amazed at the Gaul of the Ford engineers: You can make a new key but you need 2 working keys. It never stops!
For diy pro I would recommend having two to three great scan tools, one of them being Autel ruclips.net/video/uOc2TMdEQiQ/видео.htmlsi=R-NnYP22B3Yhv6XR or Otofix ( same brand) and one Xtool ruclips.net/video/nTninTEbdYA/видео.htmlsi=JYznv-jfhCRHfs8m And the last one being a backup but should have no yearly fees and the fees can really add up ruclips.net/video/mf5zDmiEpe8/видео.htmlsi=IyM4O6kinUqxeCRu If you working on a just one make of vehicle a laptop and specialized software would be a better choice than a scan tool.
Good question and honestly I’ve never tried. I would guess no for both but to be sure I would email them your vin and ask. The governor is often connected to your tire speed rating so if you are successful please don’t forget to change your tires to z rated tires. Good luck 🍀
Yes, you can but each vehicle is different so email the vin to vendor and ask for a list of supported features. For example, It works on my dodge but not my Toyota.
Yes, the model number and brand is the launch x431 pro elite. As far as the best I would say it really depends on what your are you using it for and if it’s your home or business. For home diy and no yearly fees check out this scan tool ruclips.net/video/mf5zDmiEpe8/видео.htmlsi=nXXh5xCui4FC4IGP
$199 Is that you gotta pay it each yr the199 use it or not or in 5 yrs pay 199 and get the other 4 yrs included? as low use owners dont need constant updates .
Personally I don’t renew myself when the 2 years expires as the tool is stated to work but no need to updates will downloadable at that time. Yeah it’s 199 after the 2 years is up.
You haven't reviewed many Launch products, I can tell by the video. I was duped by a salesman to buy x431 turbo. "Oh, bidirectional(yes), it'll program keys(NOPE! Not with out buying more components), doesn't cost much to keep up to date" < This last part is hilarious. As I also don't know where you are getting your $199 figure from. Because if you would dive a little deeper in the "mall" tab. You would see, depending on manufacturer, it can cost between $100 to $250 for individual manufacturer updates, each year. Or just under $600 for complete updates, each year. This is all after the initial 2 years.
For basic keys what else do you need to purchase. Who duped to by the x431 turbo? I score the scan tools based what’s available on the market as of the time. I got the $199 renewal cost from the vendor, is that between $99 to $250? If you don’t like your scan tool why don’t you return it?
@@RANDOMFIX did you not read my comment. Your $199 comment is misleading. $199 will NOT, update the "whole" of the updates. So it is no good for shops that work on multiple manufacturers. And skipped right over the part, where I mentioned one has to buy more equipment to use all functions of a launch scanner. Including programming keys, TPMS, etc. It is not a inexpensive scanner in the long run. Return it????? I only found out after purchasing the unit,and using for 2 years. That it is stupid expensive for a 1 man shop, like myself. To pay $600 a year for complete updates and the peripherals to do keys and tpms.
Can I offline program my Cvt transmission on Nissan Altima as I changed the valve body to erase the judder code? (P0171) relearn or write the original ip read or re-write?
@@RANDOMFIX That is what I did and Launch USA told me that model you are reviewing is not intended for the USA Market and that it may not work well with USA cars. They also told me that they will not be able to repair it and there will be no warranty, that I would have to contact the person that sold it to me. It seems that whoever is selling this model and brand in Amazon is not an authorized reseller and the units are for other markets as is not a Launch USA product. They also told me that they don't sell their scanners though Amazon or Ebay, then referred me to their USA Dealers to purchase or from their FrontStore. The one selling this at Amazon is Kingbolen, which is not Launch USA. I suggest you contact Launch USA and ask about that model number you purchased and get surprised by their response as I got, I ask as a pre purchase question. I would not use any Launch scanner purchased from Amazon after the information I got.
I want a universal usb link and software that will allow you to tune or change anything that any computer on the car does. But ya know, paywalls and proprietary equipment, plus lazyness, stops that from happening
Bi directional scan tools can send a command to vehicle to activate a certain component instead of just reading information from the vehicle. This really helps on modern vehicles as you can test which part is possibly bad without having to rip apart the vehicle to test the part.
It depends on the vehicle. Like I show in the videos it’s a hit or miss with scan tools when it comes to keys unless you a scan tool that meant just for keys as then you will have more compatibility. I have more success with basic Toyota and Dodge immobilizer keys.
@_Rustam_ why? to make a key for my own vehicle. We don’t more need overlays and more organizations or agencies. For professional locksmith, yes this great. But these fees are never ending and therefore the cost of everything is marked up. The scan tools that have used never asked for any sort of membership or validation. Just my thoughts.
@@RANDOMFIX in my launcher there was information that the test period will last until the end of December 2024. From 2025, any action with the immobilizer will require a NATSF account
I think It states it can code but I haven’t tried it. Thank god I have not needed to do it yet. I don’t want to try it for fun, unnecessarily, or for youtube until that day comes.
I think the x431 PAD V series are the only ones that can actually 'program' ecm's. You can 'code' parameter changes, but not actually change or update ecm software.
@@PRGDR I have the D7W, most of the special functions dont work in the USA for many brands. Most updates are for brands not sold in the usa. Beware. Should not have wasted my $$.
Yes, it can read actual mileage but it’s tricky as you need find in live data and then the actual mileage is recorded in different modules. The best scan tool for odometer fraud detection is this ruclips.net/video/uOc2TMdEQiQ/видео.htmlsi=TsyMvo6MRwGnmC64
Good day mate. I'm looking to buy a used car in Europe. The problem is that most cars there have fake mileage. I don't know which car yet. If you can tell me which scanner ( which can I buy In Australia ) , can read the right mileage from the largest number of the cars. Thanks.
I hear you this a problem everywhere. Beside fake mileage there is also mileage blockers that can purchased for $300 that would even for high line vehicles. You will have to do lots of work including check the hours of the vehicle which can be found on stereo modules. As a car dealer I can spot these vehicles pretty quickly. Here is a short video ruclips.net/video/VDtXIRl2JVc/видео.htmlsi=SD29gSZ2bngK4mWB In America we use carfax or auto checkwith a scan tool and a visual to verify the mileage. We also look for states like Utah where this sort activity is common.
Most cars have fake mileage. What nonsense. Mileage records are easily checked using a service like car vertical. Governments in Europe all have mandatory safety checks either annually or bi annually. It’s easy to track the mileage & look for inconsistency. In the UK the annual MOT test data is a public record on the government’s own website. You can easily see how well a vehicle has been maintained by how many faults are logged on the test.
I am not too sure if Europe but the more expensive the vehicle the more likely the miles can be stopped or even rolled back. Look up mileage blockers and you will be surprised.
My Launch was working until an "update" crashed the system. Now the screen is frozen. The US branch says they don't support their products bought from Amazon. The Chinese phone number doesn't work. The Launch does not even have a reset hole like cheap devices have. There is no support or help available. So a Launch is a waste of your money.
@@RANDOMFIX It is beyond the 30-day return policy of Amazon. So there is no real warranty. The Launch will be replaced by a Innova scanner because it is a U.S. company based in California with a real phone number and email address. Also, I have found Innova equipment to be well-made.
@malcolmmarzo2461 it doesn’t matter if Amazon sold it and it was listed that it had a 1 year warranty or whatever was listed is what you will ask Amazon to honor. This happens to a lot. Even one a $1000 plus scooter and I always get my money back. If Amazon allows them to post information about the warranty then they should honor the post. If Amazon ask you to do any more work just refuse and tell it’s their problem. I have had an incident where it took me 6 plus phone calls but I finally got my money back. Amazon profited and let burden the expense as well.
@@RANDOMFIX Thanks. Social media is one of the ways we can fight back. When Launch U.S.A rejected me I only had one question: Is there a way to reboot from the outside, like you can with an iPod?
Yeah, the dodge motors allow for phaser cleaning. There a total of four, 2 for the intake and 2 for the exhaust. This is not only scan tool that allows for but it’s there.
It makes you get online so I think you will have to new and some new vehicle makes require an active subscription. If you don’t want to pay for undates look at this ThinkCar 689: The Ultimate DIY Tool? Lifetime Updates + More! ruclips.net/video/mf5zDmiEpe8/видео.html
Thanks for the video I can´t believe the innordinate amount of electronicBs in today's cars, it deffies immagination; Thanks Regulators, you command car making, for the tremendous BS sets of wheels I will hold on more and more to my 5 1994 to 2001 cars, LOVE THEM MORE from this video on...
Yeah I hear you on that. I got a new scan tool that I recording a video on that comes with lifetime updates and has fca access so stay tuned to find out if it’s good. The the thinkcar 689
▶▶ Link to recommend vendor amzn.to/4dguIhm
👉 10% CODE: 6MLP39HN
▶▶ Link FCA bypass cable amzn.to/4diaQut FCA 12+8 Cable
Some cool information about FCA AutoAuth
www.fcarusa.com/TechSupport/HowTo/how-use-chrysler-bypass-12-8-cable-2018-chrysle
Great Review, i have the Launch X431 v3 which is bigger and has the wireless docking port. That annoying sound is there to remind you to remove the wireless vci and put it back into the docking port. One thing i did find when my 2 free years of updates expired and i did not renew as i only need to go to 2023. If you want to keep using the Launch after the expiry date then you have to log in to your account once a month to enable you to keep using it. Its just their chance to upsell you an update but it did catch me off guard when i went to a friends car that was in a parking lot and i was not able to use the tool as it wanted me to log in. Once i did, all was good. It works well on GM vehicles and when i need more horsepower i use the VCX Nano with GDS2. Lastly in order to use the Launch on GM when using it in Bi directional mode such as special tests, the Vehicle needs to be in service mode otherwise you will get no reading from the scan tool. This applies to GDS2 as well so its not a Launch bug. Keep up the great reviews.
Yes. We definitely want to see you bypass the gateway.
It's unpublished so enjoy ruclips.net/video/uVVCs_zENxI/видео.html
Hello again.Last night my mechanic managed to get the fuel to the rail,finally,measured the fuel pump,3b constantly,so pump now works,he found the fuel pump relay had one of the sockets disconected and lost within the cable forest under the dash,but still didn t fire up.Today starts measuring if there s tension in the injectors.Hope to at least detect the problem today.
Yeah really want to see you bypass .Thanks for the great video love it
Your wish was already recorded, I left a link in the video description
ruclips.net/video/uVVCs_zENxI/видео.htmlsi=Ti3Av90CiXCpOGzh
Now you only have 2 wishes left
Nice review. I was looking at this one, but went with an autel mx808bt for the wireless vci. I wasn't too worried about initial price, but wanted something with a reasonable update cost and the tier above these models is significantly more expensive per year without adding much functionality
Look at Otofix as its better value Autel unit. Comes with 2 years of updates and has the same software at half the cost.
Nice video i like the fact u grade them at the end. I hope to see more 200-300 dollar scan tools.
Yes, 200 to 300 is a good price, the best scan tool in that range is this ruclips.net/video/QKNp2bFYcVI/видео.htmlsi=MTjX_VkFfXFIBHhq
Add it to your cart and wait for prime day or Black Friday. It comes with 3 years of updates. This x431 pro elite probably won’t make it into the $309 range. Thank you for the feedback about the tool grade.
So every 2 years we have to paid $200 for the updates?
@@Bluebajanot every 2 years, every year after first 2 years expire, IF you want to stay current with updates. According to Launch x431 you don't have to buy updates and you can keep using the tool as is.... who would buy it otherwise at 250 a year for two years.
You may need to log in to your acc every month as someone reported in comments, but I am not 100 %sure on that yet, best ask Launch x431 themselves.
I appreciate you taking the time to review this scan tool. What is the screen size of the tool and what is the newest vehicle it will work on?
I think it a 8 inch and it should work on really new vehicles. The newest vehicle I used it on was a 2020.
Most people don’t work on 2024, 2023, 2022 vehicles as they are under warranty.
Curious what is the highest rated one you've done? I've been looking for the best features and good value. Getting into these fancy ones prices go from reasonable to you must be kidding lol.
did you know what different between x431 pro3 vs x431 pro3 link vs x431 pro3s? and which one is old and new between these?
So at the end of the day Wich bi-directional scan tool would be your highest pick. I watched all the videos and I’m just confused.. thanks
For the money Xtool D7s and just know it's always changing as the tools get better and cheaper but the renewal fees for updates continue to climb. That's why I like some the Xtool as they come with 3 years of updates and even if you don't renew you can still use the tool but you will not get additional updates. Unless you are using it for work, it is a good choice for DIY home mechanics.
Honestly, is doesn't really matter. The only place where you can fix a car with a scan tool is youtube. A scan tool can't tell you what's wrong with a car, and it certainly can fix one. Hopefully, it can give you some information that will point you in the right direction. And yes, I know you can get lucky and get a very specific code, buy a part, and it fixes the issue. Most of time that doesn't happen. In the real world, once you put the scan tool down, your real diag starts. If you buy a Walmart scanner for $50-$100, a good DVOM (A multimeter is the tool you're really going to use to diag and repair the vehicle. Never get a cheap one.), the workshop manual and wiring diagrams for your vehicle (or a service like AllData), and a good assortment of diagnostic hand tools, like test leads, wire probes, etc,..., you can do 50x more than if you went out and bought a $2000+ scanner.
Bi-directional, in most cases, is for convenience. It can save you some time, but its very rare that you can't fix a problem without the use of a bi-directional scanner. For example, something in your door lock/latch system isn't working. Its a very common problem. You can make a living just doing door latches. Sure, its nice to be able to access parameter identifiers for the door lock and related controls, but what do you do if your ID for the lock/unlock switch doesn't activate the lock? You still have to take the door apart. You'll need the manual and tools for that. You have to check the switch, latch, and all related wires. You'll need your DVOM and wiring diagrams for that. The scan tool maybe gave you a dtc for your door latch, or it just doesn't work and you don't even have a code. At best, you were able to play around with the bi-direction function on your scanner, but you didn't use it to fix your car. Most of the time, that's how it works.
That's what I am saying to him. Happy Sunday afternoon.
Happy Monday morning
I own several. Xtool D9 pro, Autel, Snap on and best one INNOVA makes. You just have to own several for complete brand support
Good to know!!!
Which innova unit do you own?
It's so confusing to know which models from Launch do what. There's like a couple dozen versions all for sale at once in 2024. Trying to find info on a CRP 919C that is just released, but the ad does not specify "X431" anywhere.
Yeah there is a lot of naming confusion with Launch even with x431 as there is a pro, pro elite, etc. they should just call it x432 or x433 instead.
Thanks for doing the video. You rated the D7 "87" 2 yrs ago. How would you compare it to this model now for the money? Thanks.
I like the d7s ruclips.net/video/QKNp2bFYcVI/видео.htmlsi=f8ExiPKEeDbcD_Y6 but if you have a fca vehicle that is 2018 and newer i would get the launch with the bypass cables. If you don’t own a fca vehicle vehicle the d7s d7w are amazing
@@RANDOMFIX Thanks for the advice. Generally I work with 2018 and older cars, so getting a D7, thank you!
Can it be used to see if sensors are going out ? Like idle sensors or any sensors?
Es muy buen equipo, pero como todos los multimarca , siempre necesitaras otro complemento.Saludos
Hey there.Nice thing to do,this review of the launch tool.Very usefull.Can i use this tool to find out why a MX5 Nb from 2001 cranks but doesn t start?
It can help be part of the solution, but scan tools cannot pin the exact cause unless you know what you are looking for. With a crank no start it’s a process of elimination.
Spark
Fuel
Compression
are major and then you need to confirm the vehicle sensors are being read and detect. Other factor, security systems, slow crank. Timing, vehicle history
I first put it load tester, test the battery, then I start checking for fuel ( easy, just spray starting fluid into into after the mass air flow sensor)
I check for spark( they sell spark plug test lights for $5)
And last I check for compression.
Start with the battery, see link in short ruclips.net/video/VeNT94t1hIU/видео.htmlsi=Osmk2pOvZH-R6Umd
Just because it cranks doesn’t mean anything, Good luck and keep me posted.
I have checked spark,it s there,sensors are good both cam and crankshaft,fuel pump makes noise,but i don t get fuel in the injector ramp or rail.Relays tick when put to the battery.Car worked flawlessly till 3 weeks ago,when it didn t start on the first key in the morning,but at the second key went on ok.A week later after this symptom occured,no start at all.
I did the spray test and she started instantly.
@razvanlupu7507 so now check for fuel pressure. It’s a process.
@@RANDOMFIX I know.The guys at the shop will do it,i asked precisely for this.Thx. I ll be in touch.
Will this be able to read coding on body control module for audi?
Is this the North American version or European. My understanding is if it's not the North American version you cannot update through Launch USA. Lauch USA has a list of serial numbers and if yours isn't on the list it needs to be dealt with in China and that goes for warranty issues also. Please correct me If I am wrong. I got this info from Launchs website in Canada.
Very well true I contacted Launch USA with questions about the scanner and my cars and they informed me that they do not sell any scanner on Ebay or at Amazon. They also told me that the scanner will never work as intended because they are not made for the USA market, they pointed to their Products page and their Storefront page. So I almost bought one, as they told me that there will be no warranty or updates, that whoever I bought from will be my contact point to obtain support and whoever is selling them or distributing them at Amazon is not an authorized USA dealer or distributor. They are buying them overseas and reseling them on Amazon. I have the email from Launch USA to prove it. I did not buy the scanner.
I'd like to see a video showing how to bypass the Gateway.
It's unpublished so enjoy ruclips.net/video/uVVCs_zENxI/видео.html
Im looking to buy one, any thoughts on Ancel FX9000 ?
I reviewed their earlier products and just feel the quality is not there yet. Look something like instead ruclips.net/video/mf5zDmiEpe8/видео.htmlsi=jbWGMuy2jCkFaZX5 lifetime updates
Or this ruclips.net/video/QKNp2bFYcVI/видео.htmlsi=LMusF1Vh4OU7EXiV
Go with wired connections as they are cheaper and more reliable.
D8W vs this X431 pro elite which you personal choose for mainly european amd asian vehicles ?
The d8w is my preference. Here is my review of the d7w ( same thing but smaller) ruclips.net/video/yo_oQ9zS04E/видео.htmlsi=m_WUKv2HtKrHmPpH
Best the easier menu system I life the fact that Xtool can be used even after the updates expire without being a brick . You just will will not get any more updates but it will still function.
Phaser cleaning. ? Say what
Hi I have a 2021 Acura TLX and my car needs a Telematics control unit and a new transmission. Which one do you recommend that can program both especially the telematics with the vin of the car. I have the small orange one but that one only helps fixes lights on the dash.
Can you change the tire size for correcting the speedo
Yes, you can. But the option is not available for every vehicle.
PLEASE show text screens LONGER. They flash so fast we don’t have time to read them with the shadowed fonts with lines going everywhere.
Otherwise, good info.
Glad to help and thank you for the feedback. I will keep your recommendation in mind going forward.
How do you compare that one to Autel maxsys ultra tablet or the Harbor freight Icon tablet?
I haven’t tried any scan tools from harbor freight. I will look into.
Can you do break reset or clear code after changing the break on new 2022 SUV suburban or GMC vehicle?
I don’t see why not but to be extra sure email your vin to vendor and ask for a list of supported features.
Is there any on it for odometer calibration
This is best odometer calibration ruclips.net/video/mf5zDmiEpe8/видео.htmlsi=x06Z8vjOWmVPucTm but it limited to adjust to adjust 10k km but you if can do it 8 times which is equal to 80k km. This one has unlimited km adjustments ruclips.net/video/VVfRnyKq8Cs/видео.htmlsi=GH8G8ErO5YMWvgEU but is not very accurate. The odometer is stored in km and converted to miles.
This does not work on all vehicles.
I can see when you are working on your vehicle the scanner is connected to WiFi, it is possible to use the scanner offline?
I think for this scan tool you need Wi-Fi to use.
All I want for Christmas is a snap on triton ! 😂
lol 😂 at 10 times the price. Maybe for professional use I would consider it but $6k is a of dough.
My question is will it program a push 2 start key. The locksmith are bandits. And I think they taught the scan industry the bandit trade.
Yes, it can make keys but not all keys. It’s pretty easy and here is a video I recorded just to show how easy it is. ruclips.net/video/eO6eAkUjwHg/видео.htmlsi=vPuL-sz2fLJFhP-4
Takes less than 5 minutes per key.
@@RANDOMFIX Oh thank you. I was going to send it back to Amazon unopened. Then, find a honest key maker. I am still amazed at the Gaul of the Ford engineers: You can make a new key but you need 2 working keys. It never stops!
*Do you have a video where you mention the scanner you believe is best for a DIY PRO?*
For diy pro I would recommend having two to three great scan tools, one of them being Autel ruclips.net/video/uOc2TMdEQiQ/видео.htmlsi=R-NnYP22B3Yhv6XR or Otofix ( same brand) and one Xtool ruclips.net/video/nTninTEbdYA/видео.htmlsi=JYznv-jfhCRHfs8m
And the last one being a backup but should have no yearly fees and the fees can really add up ruclips.net/video/mf5zDmiEpe8/видео.htmlsi=IyM4O6kinUqxeCRu
If you working on a just one make of vehicle a laptop and specialized software would be a better choice than a scan tool.
@@RANDOMFIX Got it Thank you for your response!
Anytime
Hey, RamdomFix I’m wondering if this scan tool would useful for a Toyota Prius hybrid battery check?
I have a Prius and can mention record in upcoming reviews.
What exactly do you want to check on the hybrid battery?
Hey thanks Great tool
You're welcome!😉
I constantly have trouble getting into the live data,there's no one to ask any questions and it sucks.
What is the make and model of the vehicle?
Are you able to get into ob2 live data?
Hi,no I am not able to acess the live data stream because I could not find it.Its was my wife's 2011 volvo v70.It had an evvap code,small leak DTC.
Can it change the governor on a car or a speed control or a rev limiter?
Good question and honestly I’ve never tried. I would guess no for both but to be sure I would email them your vin and ask. The governor is often connected to your tire speed rating so if you are successful please don’t forget to change your tires to z rated tires.
Good luck 🍀
Nice video. Thanks!
Thank you, I am really trying to show the tools in an accurate manner. No hype
Hey thanks I'd like to see you bypass
Editing the video today
It's unpublished so enjoy ruclips.net/video/uVVCs_zENxI/видео.html
Can you check misfires on each cylinder?
Yea, either through live data or some makes have a misfire count for each cylinder.
Thank you for this video
Sir, what tools are used to lower the car's mileage?
Yes, you can but each vehicle is different so email the vin to vendor and ask for a list of supported features.
For example, It works on my dodge but not my Toyota.
Is this model and brand the best OBD2 scanner?
Yes, the model number and brand is the launch x431 pro elite. As far as the best I would say it really depends on what your are you using it for and if it’s your home or business.
For home diy and no yearly fees check out this scan tool ruclips.net/video/mf5zDmiEpe8/видео.htmlsi=nXXh5xCui4FC4IGP
@@RANDOMFIX what about xtool then?
Can u suggest me a budget scanner for toyota Auris hybrid 2014 1.8 l uk model please
Glad to help ruclips.net/video/mf5zDmiEpe8/видео.htmlsi=L5qA7ndbhbbDupRz
can it erase and program the ECU
It reset an ecu. What you are looking for is a scan tool that can ecu program and is about $2000 starting and only works on select vehicles.
@@RANDOMFIX thank you sir
$199 Is that you gotta pay it each yr the199 use it or not or in 5 yrs pay 199 and get the other 4 yrs included? as low use owners dont need constant updates .
Personally I don’t renew myself when the 2 years expires as the tool is stated to work but no need to updates will downloadable at that time.
Yeah it’s 199 after the 2 years is up.
@@RANDOMFIX 199 each yr? or can you skip 3 yrs and on year 4 do an update?
Sure I don’t see why you couldn’t do that?
After the free two year, you only need updates when new vehicles that you want to work on come out
Can this alter ccf files on a Range Rover
Does it requite a sub to there website like OTC Evolve does?
There is a login required each time you use it so maybe it does.
Is that a concern? Please elaborate
Thanks
@@RANDOMFIX Yes. I want a stand alone scan tool.
You haven't reviewed many Launch products, I can tell by the video. I was duped by a salesman to buy x431 turbo. "Oh, bidirectional(yes), it'll program keys(NOPE! Not with out buying more components), doesn't cost much to keep up to date" < This last part is hilarious. As I also don't know where you are getting your $199 figure from. Because if you would dive a little deeper in the "mall" tab. You would see, depending on manufacturer, it can cost between $100 to $250 for individual manufacturer updates, each year. Or just under $600 for complete updates, each year. This is all after the initial 2 years.
For basic keys what else do you need to purchase. Who duped to by the x431 turbo?
I score the scan tools based what’s available on the market as of the time. I got the $199 renewal cost from the vendor, is that between $99 to $250?
If you don’t like your scan tool why don’t you return it?
@@RANDOMFIX did you not read my comment. Your $199 comment is misleading. $199 will NOT, update the "whole" of the updates. So it is no good for shops that work on multiple manufacturers. And skipped right over the part, where I mentioned one has to buy more equipment to use all functions of a launch scanner. Including programming keys, TPMS, etc. It is not a inexpensive scanner in the long run. Return it????? I only found out after purchasing the unit,and using for 2 years. That it is stupid expensive for a 1 man shop, like myself. To pay $600 a year for complete updates and the peripherals to do keys and tpms.
Can this do a odometer correction on a 2021 ford ranger
I am not sure about your 2021 ranger I would email the vendor your vin Numbee and ask.
@@RANDOMFIX cheers
Try it
Can I offline program my Cvt transmission on Nissan Altima as I changed the valve body to erase the judder code? (P0171) relearn or write the original ip read or re-write?
Ohh I haven’t tried that. I would email vendor you vin and ask prior to purchasing it.
@@RANDOMFIX That is what I did and Launch USA told me that model you are reviewing is not intended for the USA Market and that it may not work well with USA cars. They also told me that they will not be able to repair it and there will be no warranty, that I would have to contact the person that sold it to me. It seems that whoever is selling this model and brand in Amazon is not an authorized reseller and the units are for other markets as is not a Launch USA product. They also told me that they don't sell their scanners though Amazon or Ebay, then referred me to their USA Dealers to purchase or from their FrontStore. The one selling this at Amazon is Kingbolen, which is not Launch USA. I suggest you contact Launch USA and ask about that model number you purchased and get surprised by their response as I got, I ask as a pre purchase question. I would not use any Launch scanner purchased from Amazon after the information I got.
Howe mach kost instrument
I want a universal usb link and software that will allow you to tune or change anything that any computer on the car does.
But ya know, paywalls and proprietary equipment, plus lazyness, stops that from happening
How can I get free scanners
what is bidirectional support?
Bi directional scan tools can send a command to vehicle to activate a certain component instead of just reading information from the vehicle. This really helps on modern vehicles as you can test which part is possibly bad without having to rip apart the vehicle to test the part.
@RANDOMFIX perfect answer and thanks for responding!
Glad to help
I have x431 pro elite V and I want to program keys. Advise what to take?
It depends on the vehicle. Like I show in the videos it’s a hit or miss with scan tools when it comes to keys unless you a scan tool that meant just for keys as then you will have more compatibility. I have more success with basic Toyota and Dodge immobilizer keys.
@RANDOMFIX bat you have the NATSF licence?
@_Rustam_ why? to make a key for my own vehicle. We don’t more need overlays and more organizations or agencies. For professional locksmith, yes this great. But these fees are never ending and therefore the cost of everything is marked up.
The scan tools that have used never asked for any sort of membership or validation.
Just my thoughts.
@@RANDOMFIX in my launcher there was information that the test period will last until the end of December 2024. From 2025, any action with the immobilizer will require a NATSF account
@_Rustam_ on the this unit? This is so bad and sad, they are wanting to collect fees even from regular diy home mechanic.
What about CNG, LNG or propane
never tried, I don't think anything will be different.
to use it, we should WiFi connected.
Yes, you need internet as it will log you in when you first connect upon each power up.
ECU programming?
I think It states it can code but I haven’t tried it. Thank god I have not needed to do it yet. I don’t want to try it for fun, unnecessarily, or for youtube until that day comes.
I think the x431 PAD V series are the only ones that can actually 'program' ecm's. You can 'code' parameter changes, but not actually change or update ecm software.
it got this
Nice enjoy it
How would you rate the launch 431 against the Xtool D8(form, functionality, price)?
I think the d8s has an easier to understand inference, here is the complete video ruclips.net/video/VVfRnyKq8Cs/видео.htmlsi=xVojt-Ij1cStT_dL
@@RANDOMFIXHow about against the D7S?
@@PRGDR I have the D7W, most of the special functions dont work in the USA for many brands. Most updates are for brands not sold in the usa. Beware. Should not have wasted my $$.
Yes, there are lot of different brands that get updated.
What specially can’t you do? What is the make and model?
Can it read the actual mileage the car has driven. Not necessarily what the odo says (used car scams).
Yes, it can read actual mileage but it’s tricky as you need find in live data and then the actual mileage is recorded in different modules. The best scan tool for odometer fraud detection is this ruclips.net/video/uOc2TMdEQiQ/видео.htmlsi=TsyMvo6MRwGnmC64
@@RANDOMFIX Thank you.
Bypass cable🙏
Yes, I ordered it last night and will arrive tomorrow.
I also got fca autoauth so I can show that on Xtool ip919 pro
Good day mate. I'm looking to buy a used car in Europe. The problem is that most cars there have fake mileage. I don't know which car yet. If you can tell me which scanner ( which can I buy In Australia ) , can read the right mileage from the largest number of the cars. Thanks.
I hear you this a problem everywhere. Beside fake mileage there is also mileage blockers that can purchased for $300 that would even for high line vehicles. You will have to do lots of work including check the hours of the vehicle which can be found on stereo modules.
As a car dealer I can spot these vehicles pretty quickly. Here is a short video ruclips.net/video/VDtXIRl2JVc/видео.htmlsi=SD29gSZ2bngK4mWB
In America we use carfax or auto checkwith a scan tool and a visual to verify the mileage. We also look for states like Utah where this sort activity is common.
Most cars have fake mileage. What nonsense. Mileage records are easily checked using a service like car vertical. Governments in Europe all have mandatory safety checks either annually or bi annually. It’s easy to track the mileage & look for inconsistency. In the UK the annual MOT test data is a public record on the government’s own website. You can easily see how well a vehicle has been maintained by how many faults are logged on the test.
I am not too sure if Europe but the more expensive the vehicle the more likely the miles can be stopped or even rolled back. Look up mileage blockers and you will be surprised.
Bonjour je m'appel Noël je suis en Afrique RDC .vill de Kinshasa comment je avoir cette machine et leprix
The link is video but you have to buy from eBay or a bother direct seller.
My Launch was working until an "update" crashed the system. Now the screen is frozen. The US branch says they don't support their products bought from Amazon. The Chinese phone number doesn't work. The Launch does not even have a reset hole like cheap devices have. There is no support or help available. So a Launch is a waste of your money.
Call Amazon and demand a refund. Don take no for answer. Have Amazon enforce the warranty
@@RANDOMFIX It is beyond the 30-day return policy of Amazon. So there is no real warranty. The Launch will be replaced by a Innova scanner because it is a U.S. company based in California with a real phone number and email address. Also, I have found Innova equipment to be well-made.
@malcolmmarzo2461 it doesn’t matter if Amazon sold it and it was listed that it had a 1 year warranty or whatever was listed is what you will ask Amazon to honor. This happens to a lot. Even one a $1000 plus scooter and I always get my money back. If Amazon allows them to post information about the warranty then they should honor the post. If Amazon ask you to do any more work just refuse and tell it’s their problem. I have had an incident where it took me 6 plus phone calls but I finally got my money back.
Amazon profited and let burden the expense as well.
@@RANDOMFIX Thanks. Social media is one of the ways we can fight back. When Launch U.S.A rejected me I only had one question: Is there a way to reboot from the outside, like you can with an iPod?
Price???
We can't see the data screen because it's to far away.
Thank you for the feedback, I will try to get less glare on the future videos
`Not being able to program keys is an absolute deal breaker.
Thanks for sharing your view about the key being a deal breaker.
Phaser cleaning. ?..
Say what
Yeah, the dodge motors allow for phaser cleaning. There a total of four, 2 for the intake and 2 for the exhaust. This is not only scan tool that allows for but it’s there.
No Bluetooth?
Nope good old corded
$199 to renew? What happens if you don’t?
It makes you get online so I think you will have to new and some new vehicle makes require an active subscription.
If you don’t want to pay for undates look at this ThinkCar 689: The Ultimate DIY Tool? Lifetime Updates + More!
ruclips.net/video/mf5zDmiEpe8/видео.html
Thanks for the video
I can´t believe the innordinate amount of electronicBs in today's cars, it deffies immagination;
Thanks Regulators, you command car making, for the tremendous BS sets of wheels
I will hold on more and more to my 5 1994 to 2001 cars, LOVE THEM MORE from this video on...
Yes, the electronics on the newer vehicles are a lot more.
However the newer vehicles are reliable.
kind of sounded like the throttle body relearn was way high rpm oh 1500 rpm too fail
The relearn was fine. I pressed the throttle. Just got back a 3500 journey in the vehicle and it did great. 👍
all scanners are Bi-directional. Can bus works in sending and receiving data. You mean device activations.
That too much $199.00 to renew, next
Yeah I hear you on that. I got a new scan tool that I recording a video on that comes with lifetime updates and has fca access so stay tuned to find out if it’s good. The the thinkcar 689
Mine cost me $1,200.
Which version did you get?
Without Bluetooth? No way
Well, okay but there are some people that like corded units. Better than Bluetooth is the Wi-Fi Direct units as the speed unmatched by bt.
@@RANDOMFIXwhen im driving i dont want a cable down on my feet. Thats why
Thanks sir...
Welcome
Can this change ccf files on a Range Rover