You cannot determine the bolt circle of a 5-lug pattern by measuring from the center of opposing bolt holes across the centerbore. 4, 6, or 8 OK, but not 5
I likely was thinking that was the dual 6 lug wheel. Even numbers are center to center while odd are center to far end of hole across. Probably tricked myself because there was one directly across from whatever I measured, Thanks for pointing that out! -Kirk
So not to sound stupid, but why not make custom plug sets for the extra holes? That could be a nice decorative thing to do. For instance, why not led light plugs, with choice of color , or just little sculls or extra spikes? They could attach with a shim from behind and be installed with the rim. Now you can send me that royalty check !!!:)
I got a set a wheels from a friend and they're 225/40R 18's all around for my 04' Subaru outback, turns out they just barely fit, it's like a half inc maybe even some odd centimeters difference in the hub size. I learned a lesson today sadly, the hard way - - Moral of the story test fit before you buy ladies and gentlemen
Thanks for this video!! I recently bought a pair of wheels and tires from a sheriff's department at auction and the wheels had 10 holes drilled in them. I had never seen that before. I drive a 30-year-old pickup with 8 lugs. If I missed it, I apologize, but are there different wheels for Dodge, Chevy, and Ford, or will these wheels I have fit most any of them? I wish I could send you a pic. Either way, this was a big help for me to get started. The sheriff's department looked to have all GM vehicles i.e. Blazers and GM pickups and such. Don't have any idea if these wheels and tires came off of one of their vehicles or not.
@@xxchroniesiesxx9107 would you not check compatibility first to be sure? Plus, there are thousands of videos just like this one that pitch valuable knowledge, underhanded, so that everyone can understand.
I have a 1958 Chevy Stepside Pick up restorod. Stock suspension and ride height & 6 lug. I would like to run 17" wheels front & rear but don't know what width & offset I can get away with.
I just need to know where exactly is the part / style number for my 2017 Honda civic hatchback sport ?! Wheels ( not tire, I have 18 " so I also know I'd need 18" wheel) I think I saw a metal plate behind one part that read 555555. I've looked it up and it's just showing me every style of wheel that comes with that year. I'm also not too sure what 5 spoke or 10 spoke means. I'm assuming how many lugs are around the center cap??? Please help. I have to replace 2 by may 20th
I bought some 17x8 inch rims w/a bolt pattern of 5x110 Guy at the shop told me they won’t fit my 2010 Chevy Malibu even though 5x110 is the bolt pattern - guy said I need 5x114. I’m confused… Which ones do I need?
So I just got a set of enkeis with a 5x114.3 pattern which is what my car uses. I can only get one lug on and then the others are thrown off and they don’t fit. Any advice?
I have some wheels that are dual drilled. 5x115 and 5x4.75. Offset + 10 and center bore 72.6....... Since they were originally made for camaro with they fit on a 2007 monte carlo being the dual drilled rims bore is 72.6? Would I have to use hub centric rings or something?
Are fuel assaults dual drilled? They have a covered cap but on your website only one bolt pattern is selected... I’m out of town rn and can’t pop off the cap to see. Trying to trade them...
I have a 2022 gmc canyon elevation 4x4 with a 6x120 bolt pattern and i was looking to purchase a set of 20x12 Weld XT Forged Konflict XT and when i emailed customer service for a shipping quote to hawaii they told me that the those wheels does not work with my bolt pattern but it says it does on your site. Really want those wheels for my canyon 😭.
Question. A rim that has dual bolt patterns (5x114.5 and 5x100). Would the rim with those patterns ( or any that have the holes closer to each other) be a hazard as far as strength? I look at a image of a rim with those specs, and because the smaller bolt pattern that is closer to the bore hole as less meat (metal around it, as a pose to a rim with a single bolt pattern). Just wonder if there less integrity and possibility of that surface area, cracking/snapping from strain?
I have wheels with 115mm bolt pattern. My vehicle has a 114.3 bolt pattern. They do fit, and bolt nicely, but is it safe? I get some who say no, some say it's fine. I drove it, and there are no vibrations, wandering, or shaking. Drives great. I did buy hub centric rings for it as well.
I have a 2012 Subaru wrx the bolt pattern is 5x100 I ordered 5x100 bolt pattern wheels and they don’t fit what did I do wrong (the wheels I had were sti wheels that are 5x114 but I went off what the car bolt pattern is
So my vehicle is sitting on 15s the tires are 5x41/2 .. Now what I want to put it on is a new set of tires from my old Honda they’re momo 17” rims and they’re 4x51/2 ... I know I’ll need an adaptor to make up for the fact that one tire is a four lug and the other a five . But what about the lug spacing ?? Do they make adapters that’ll allow me to overlook that issue and put on the new 17” 4x51/2 tires on my 5x41/2 that my vehicle from what I can see demands ..?? Oh btw the vehicle is a 2015 Kia Forte sedan lx ( base model )
My bolt pattern is 5x115 but I recently purchased some 5x114.3 wheels.. I plan on using a hub centric ring but I’m worried about the stress on the bolts.. can I get away with? It’s just a commuter car
quick question I bought some universal rims off my friend who had the same car as me only a little newer, he said they fit his car so that mine would be fine however when I went to the shop to install them the worker told me they didn’t fit?
Universal wheels are not truly universal, they only have two bolt patterns on them. Different years or trims of vehicles can have different bolt patterns.
alot of the 6 lug wheels are dual drilled. And have had no issues Steve! Are they as strong as a single pattern billet wheel, they are not. That is why there is a price hike comes in, with a higher load rating wheel, and all that jazz!
Craftsmansteve I have a prediction that sometime in the future these dual drilled wheels are going to show up on the news as being a great idea for the manufacturer, and a horrible idea for the consumer. These look awfully week to me.
My car has a stupid bolt pattern of 5x115, which is impossible to find aftermarket rims for. Is it safe to put 5x114.3 on the 5x115? It's a .7mm difference which is virtually nothing, but I also don't want a wheel coming off on the highway, please help
I wish wheel guys would tell the size of the hub hole. Like Chevy hub hole is around 2 3/4 and gmc Colorado is 6x5.5 but the hub hole 4 1/4 . Because it is a Isuzu truck with gmc badges.
As long as it’s the correct bolt pattern and offset/width it should! Check out fitment industries gallery for help with fitment man! Fitmentindustries.com/gallery
Did you know that although rare, there are tape measures and rulers out there that are not 100% dependent on the appendage length of a dead monarch? All joking about mm versus inches aside, there are other fitment item that should matter for wheels. Most aftermarket wheels should have a spacer ring for the inner bore. For example, Toyota and Chevy/GMC both make wheels with a 6x5.5 lug pattern but the Toyota center bore is vastly bigger. The new Ram trucks with the 6x5.5 wheels have a slightly smaller center bore than the Chevy/GMC. Do you folks do test fitments on all your wheels to make sure they have good clearance for the brake calipers etc.,. ?
im so confused. i have 2018 chevy silverado with 6x5.5 pattern and bought ballastic wheels that say 6x5.5 bolt pattern but only received 20 bolt lugs altogether so thats 5 lugs a wheel but i have 6 lugs
Sounds like a mistake! Please email us with as much info as possible in one email and we will get back to you in one business day! sales@customoffsets.com
Dude I ordered a set of wheels for my 03 Silverado and I received my wheels and it had 12 holes and it was 6x5.5 / 6x135 so does that mean it will fit both a Chevy and ford?
Figure out if they are the same bolt pattern and find out what the wheel specs are so you can check our gallery to make sure those specs will fit your truck!
Ok.......... Somebody help me out. 2017 Wrangler JK: I want solid Steel wheels capable of dog-dish caps. Mopar makes Steel Wheels for Ram Trucks. Will these wheels fit a 17 Jeep JK ?
I ordered Lug Nuts with my new set of rims and tires, because I didn't know how to determine size of lugnuts I needed they sent me lug nuts size of ( 14x2.0), it turned out that was the wrong size. I didn't know how to determine what size lug nuts I needed so I ran to my local parts store. The local parts store determined from fitting old lug nut I needed a 14x1.5, which they had in stock. When I got back to install new lug nuts on my truck I tried to install new lug nuts on truck but they would only thread about 1/8 of an inch. I stopped at that point because I didn't want to strip the threads on my studs. I'm at a loss with figuring out what to do!
I recently bought a set of BBS wheels for my 1993 Ford Probe GT and the factory wheel specs are 16x7 5 lug 5x114.5 and the BBS wheels I bought are 16x7 5 lug BUT 5x120. I REALLY hope there is someway I can make these fit. Because the wheels are 5.5mm too big will they still fit?? Idk what to do!! Somebody please help!! I’m very worried!!
ALWAYS make sure you are buying the correct bolt pattern. You can however order wheel adaptors to make them work. Check out our friends at fitmentindustries.com
Heck with the extra holes! I'm still trying to grasp the whole negative and positive offset thing. Now I have to figure out what to put in the extra holes. I'm sure I can JB weld spikes in those empty holes!!😉
@@CustomOffsetsTV well it entered my wheel but the bolts on the aftermarket wheels were to big to enter my lugs so I bought wobble bolts and it worked? I'm not sure if the wheel is a 115x5, or a 5x114.3 what do you think because all lot of the times offmarket wheels use the same size for both of those bolt patterns
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
You cannot determine the bolt circle of a 5-lug pattern by measuring from the center of opposing bolt holes across the centerbore. 4, 6, or 8 OK, but not 5
I likely was thinking that was the dual 6 lug wheel. Even numbers are center to center while odd are center to far end of hole across. Probably tricked myself because there was one directly across from whatever I measured, Thanks for pointing that out! -Kirk
No talking .
The worst thing is when the wheel you really want doesn’t come in your bolt pattern
😥
Dude, they don’t even make 7 lug ones :/
I need small Chevy five lug to Ford F-150 five lug
@@jefftucker8794do they have kind of the same bolt pattern?
I think the people living and dealing with the hurricane would say it is not even close to being the worst thing.
So not to sound stupid, but why not make custom plug sets for the extra holes? That could be a nice decorative thing to do. For instance, why not led light plugs, with choice of color , or just little sculls or extra spikes? They could attach with a shim from behind and be installed with the rim. Now you can send me that royalty check !!!:)
I got a set a wheels from a friend and they're 225/40R 18's all around for my 04' Subaru outback, turns out they just barely fit, it's like a half inc maybe even some odd centimeters difference in the hub size. I learned a lesson today sadly, the hard way - -
Moral of the story test fit before you buy ladies and gentlemen
Somebody selling me a wheels that was 5x112 and redrilled to 5x114.3. Thoughts on that? Are the wheels still good?
Thanks for this video!! I recently bought a pair of wheels and tires from a sheriff's department at auction and the wheels had 10 holes drilled in them. I had never seen that before. I drive a 30-year-old pickup with 8 lugs. If I missed it, I apologize, but are there different wheels for Dodge, Chevy, and Ford, or will these wheels I have fit most any of them? I wish I could send you a pic. Either way, this was a big help for me to get started. The sheriff's department looked to have all GM vehicles i.e. Blazers and GM pickups and such. Don't have any idea if these wheels and tires came off of one of their vehicles or not.
Will a universal rim off a Ford fit a ram 1500 and the first is f150
So this means I can buy silverado wheels and put them on a titan?
Idk but you can put Cadillac wheels on a mighty max and it's hilarious
Can I put 6 lug dodge wheels on my 6 lug Chevy?
Will my car that’s a 5x120 fit a 5x120.65 rim with no issues ?? Please get back to me
For fook sake, finally a video on this! What is that first wheel you showed us.
I ordered my first ever set of wheels and I’m tripping about the bolt pattern😓
You can send an email to sales@customoffsets.com if you have any questions or concerns about your order!
I spent 687 on ekm3’s an they don’t fit
@@xxchroniesiesxx9107 would you not check compatibility first to be sure? Plus, there are thousands of videos just like this one that pitch valuable knowledge, underhanded, so that everyone can understand.
I have a 1958 Chevy Stepside Pick up restorod. Stock suspension and ride height & 6 lug. I would like to run 17" wheels front & rear but don't know what width & offset I can get away with.
Shoot us an email to info@customoffsets.com so an expert can help you with your setup!
I just need to know where exactly is the part / style number for my 2017 Honda civic hatchback sport ?! Wheels ( not tire, I have 18 " so I also know I'd need 18" wheel) I think I saw a metal plate behind one part that read 555555. I've looked it up and it's just showing me every style of wheel that comes with that year. I'm also not too sure what 5 spoke or 10 spoke means. I'm assuming how many lugs are around the center cap??? Please help. I have to replace 2 by may 20th
Shoot us an email to sales@customoffsets.com and our experts may be able to help you! 🙏🏻
I bought some 17x8 inch rims w/a bolt pattern of 5x110
Guy at the shop told me they won’t fit my 2010 Chevy Malibu even though 5x110 is the bolt pattern - guy said I need 5x114.
I’m confused…
Which ones do I need?
So I just got a set of enkeis with a 5x114.3 pattern which is what my car uses. I can only get one lug on and then the others are thrown off and they don’t fit. Any advice?
Reach out to our customer service team to make sure you have the correct wheel for your vehicle.
If my truck has 5×108mm 5×114.3mm wont work? Are there adapters to make it ok?
We do sell adapters! send us an email to info@customoffsets.com
Is a 2015 Nissan Murano bolt pattern the same as a 2004 dodge ram
Are double drilled wheels significantly weaker than single drilled
No! They are well within their limits, great question though!
I have some wheels that are dual drilled. 5x115 and 5x4.75. Offset + 10 and center bore 72.6....... Since they were originally made for camaro with they fit on a 2007 monte carlo being the dual drilled rims bore is 72.6? Would I have to use hub centric rings or something?
Yes we would recommend a hub centric ring so it fits snug and correctly.
Ok I have a Chevy S10 truck and I wanna put wheels from a Ford F-150 truck on the S10 truck help me 2:23 2:25
I know they have adapters for me
What are the blue numbers for
Send us an email and we can help you out! sales@customoffsets.com
Can I fit the new 2023 BBS Forged Tundra rims on a 2007 4Runner?
is it ok to fit a 5x 114.3
to a 5x100 Bolt Pattern?
thanks
so if theses wheels have 10 holes would it fit my 6 lug Tacoma ?
IKR bro. I have a 5 lug Jeep and the new wheels have 10 holes lol. Idk what to think. There’s so many holes it must fit eh?
I highly doubt it
Are fuel assaults dual drilled? They have a covered cap but on your website only one bolt pattern is selected... I’m out of town rn and can’t pop off the cap to see. Trying to trade them...
I want to put 15x10 American racing wheels on my 1995 ford f150,will that work properly?
I have a 2022 gmc canyon elevation 4x4 with a 6x120 bolt pattern and i was looking to purchase a set of 20x12 Weld XT Forged Konflict XT and when i emailed customer service for a shipping quote to hawaii they told me that the those wheels does not work with my bolt pattern but it says it does on your site. Really want those wheels for my canyon 😭.
Question. Can i put a wheels with 8 holes and my 6 stud wheel?
That is probably a universal wheel so it would depend if one of the two is the right bolt pattern for your truck.
Are 10 holes all 5 lug?
I have a 2010 Chevrolet traverse with a bolt pattern of 7.5j×6×132.4, do you think a 7.5jx6×139.7 will fit on my traverse?
Don't believe so! Shoot us an email sometime and we can help you find something that fits!
Question. A rim that has dual bolt patterns (5x114.5 and 5x100). Would the rim with those patterns ( or any that have the holes closer to each other) be a hazard as far as strength? I look at a image of a rim with those specs, and because the smaller bolt pattern that is closer to the bore hole as less meat (metal around it, as a pose to a rim with a single bolt pattern). Just wonder if there less integrity and possibility of that surface area, cracking/snapping from strain?
All wheels have safety ratings they have to pass and should be of no concern man!
@@CustomOffsetsTV Thanks!!
Are 5 x 114.3 and 5 x 115 interchangable ?
Have you done a video on adapters like dodge 5 bolt to Chevy 6 bolt about the pros and cone of them ?
I have wheels with 115mm bolt pattern. My vehicle has a 114.3 bolt pattern. They do fit, and bolt nicely, but is it safe? I get some who say no, some say it's fine. I drove it, and there are no vibrations, wandering, or shaking. Drives great. I did buy hub centric rings for it as well.
Definitely not recommended Jelsick
Custom Offsets can 6x120 be drilled to 6x114.3?
So my question is, ford bolt pattern 6x135 will fit a chevy 6x139??????
No it won’t
I have a 5x4.5 and want to buy a 5x5, they won’t fit, right?
I want to put 2015 SS Camaro wheels on a 95 Silverado is that really safe and possible
I have a 2012 Subaru wrx the bolt pattern is 5x100 I ordered 5x100 bolt pattern wheels and they don’t fit what did I do wrong (the wheels I had were sti wheels that are 5x114 but I went off what the car bolt pattern is
Hey! Please reach out to our customer service team and they can look into this for you!
Sales@customoffsets.com
920-949-0909
How about the middle where the wheel sits?
So my vehicle is sitting on 15s the tires are 5x41/2 .. Now what I want to put it on is a new set of tires from my old Honda they’re momo 17” rims and they’re 4x51/2 ... I know I’ll need an adaptor to make up for the fact that one tire is a four lug and the other a five . But what about the lug spacing ?? Do they make adapters that’ll allow me to overlook that issue and put on the new 17” 4x51/2 tires on my 5x41/2 that my vehicle from what I can see demands ..?? Oh btw the vehicle is a 2015 Kia Forte sedan lx ( base model )
I have a 2014 silverado 6×139.7 6×5.5 and want to buy these wheels but theyre 6×114.7 6×4.5 or something like that. Would these fit?
Use our gallery for fitment help! www.customwheeloffset.com/search-wheel-offset-gallery
I have 5 lug wheels on my ram 1500 can I give them to my friend that has a tundra??
You'll have to make sure its the same bolt pattern
I got a 2003 buick century is a 5 lug can i fit these 22s 10 lug universal ?
I have azara 514 24s I have on my charger but I want to swap em to 1986 fire bird/ any way?
So is all 6 lug comparable? I’m trying to buy some rims off of a ford for a Mitsubishi will they fit?
Send us an email to sales@customoffsets.com 🤘
So my car is 5x100 and I’m getting rims with a dual bolt pattern of 5x114 and 5x100 these should work correct ? Please help
Yes they should
So 8 lug wheels won’t fit on my 6 lug chevy …?
i need help… looking to buy rims and i’m confused
Shoot our team an email and our team can gladly get you all the help and info you need! sales@customoffsets.com
If I need 20''- 5x120 as bolt pattern For Cady XT4! May I use wheel from BMW 20'' -5x120 as blot pattern
So, my luggpattern on my tailer is 5x110mm and my weels are 5x112mm so the weels "fit" but is it safe?
They would not fit. I mean, maybe with a hammer, but then you'll be rolling with your wheels not centered properly.
Custom Offsets well, alle the screws go in all the way, but i think there is some stress, its not hard to screw them in to
Use wobble nuts/bolts ;)
I have the same rim size and hub size, Did you have a problem with those wheels being on the car ?
Will 6×5.5 interchange with 6×114
My bolt pattern is 5x115 but I recently purchased some 5x114.3 wheels.. I plan on using a hub centric ring but I’m worried about the stress on the bolts.. can I get away with? It’s just a commuter car
Although 5x115 and 5x114.3 are very close, it is technically the wrong bolt pattern and those wheels should not be installed.
Just use wobblenuts :)
How did they work out bro ? I did the same thing
so your telling me if i buy wheels n tires off a guy who has a chevy it will fit my 05 f150?
If they are dual drilled yes. Your bolt pattern is 6x135 and Chevy bolt pattern is 6x139.7(6x5.5).
What’s the pattern on a Land Rover discovery 1? Is has 5 lugs
The bolt pattern for a Land Rover Disco 1 is a 5x6.5
quick question I bought some universal rims off my friend who had the same car as me only a little newer, he said they fit his car so that mine would be fine however when I went to the shop to install them the worker told me they didn’t fit?
Universal wheels are not truly universal, they only have two bolt patterns on them. Different years or trims of vehicles can have different bolt patterns.
2015 Chevy Tahoe LT is 6x139.7. Bought Velocity 26" rims at 6x139.7. Won't fit by a hairline. What can I do?
Send us an email to sales@customoffsets.com and we can try to help!
So what is 6jx15h2 rim size
If you search google they have calculators for this! 🙏
The new Ram 1500 has 6 lug but pattern . Would I be able to upgrade a 2014 5 lug nut to a 6 lug pattern?
Abel Casanova it MAY be physically possible, but it would involve getting entirely new hubs machined. Likely more work than it’s worth.
Do you think that dual drilled rims are as structurally strong as regular ones that have just one bolt pattern?
alot of the 6 lug wheels are dual drilled. And have had no issues Steve! Are they as strong as a single pattern billet wheel, they are not. That is why there is a price hike comes in, with a higher load rating wheel, and all that jazz!
Craftsmansteve I have a prediction that sometime in the future these dual drilled wheels are going to show up on the news as being a great idea for the manufacturer, and a horrible idea for the consumer. These look awfully week to me.
My car has a stupid bolt pattern of 5x115, which is impossible to find aftermarket rims for. Is it safe to put 5x114.3 on the 5x115? It's a .7mm difference which is virtually nothing, but I also don't want a wheel coming off on the highway, please help
DO NOT use a 5x114.3 wheel for a 5x115 pattern, check these out - www.fitmentindustries.com/store/wheels?bolt=5x4.52,5x115
Use wobblenuts.
My Chevy impala is 5x115 can I fit a 5x5
So how do i put on spike lugs if I have a hub cap?
I wish wheel guys would tell the size of the hub hole. Like Chevy hub hole is around 2 3/4 and gmc Colorado is 6x5.5 but the hub hole 4 1/4 . Because it is a Isuzu truck with gmc badges.
Will a 5x5 fit on a 5x5.5 bolt pattern
Bro that’s what I’m tryna figure out rn😆 did you ever get them on ?
I have a 2005 Dodge Ram 1500 would Toyota Tundra runs fit on it?
Please email us at info@customoffsets.com for help!!
Two sets of holes takes a lot of meat away doesn't it?
If I have a 6 bolt rim believe it is a 5.5 and 5 daul am I able to adapt to a 5 bolt 4.5 ?
Will a dual drill ruff rims 15 inch fit a 2008 Scion xD ??
As long as it’s the correct bolt pattern and offset/width it should! Check out fitment industries gallery for help with fitment man! Fitmentindustries.com/gallery
Will this work for both 5x114.3?
Front are 20x9
Rear are 20x11
As long as all have the same bolt pattern? 2012 Nissan Rogue.
Did you know that although rare, there are tape measures and rulers out there that are not 100% dependent on the appendage length of a dead monarch? All joking about mm versus inches aside, there are other fitment item that should matter for wheels. Most aftermarket wheels should have a spacer ring for the inner bore. For example, Toyota and Chevy/GMC both make wheels with a 6x5.5 lug pattern but the Toyota center bore is vastly bigger. The new Ram trucks with the 6x5.5 wheels have a slightly smaller center bore than the Chevy/GMC. Do you folks do test fitments on all your wheels to make sure they have good clearance for the brake calipers etc.,. ?
What is the lug pattern on a 19 Chevy Colorado 4WD WT with 6 lugs?
6x120!
would my 5x114.3 car fit 5x112 wheels? please answer
You would need 5x114.3 wheels
@@CustomOffsetsTV ohhh okay, thank you so much!
im so confused. i have 2018 chevy silverado with 6x5.5 pattern and bought ballastic wheels that say 6x5.5 bolt pattern but only received 20 bolt lugs altogether so thats 5 lugs a wheel but i have 6 lugs
Sounds like a mistake! Please email us with as much info as possible in one email and we will get back to you in one business day! sales@customoffsets.com
Dude I ordered a set of wheels for my 03 Silverado and I received my wheels and it had 12 holes and it was 6x5.5 / 6x135 so does that mean it will fit both a Chevy and ford?
It means they're universal 6 lug, so they'll fit your truck and any truck with either of those patterns
Omg I was tripping about it mine has 12 holes also lol
Question. Does a wheel with a lug pattern 8x6.5 fit both ram 2500 and duramaxes?
Yes, just got to pay attention to hub bore size as they are different
I have the bolt pattern right its just the bolt placements are a little small...
I have question I have 2001 Chevy HD 2500 was going to buy some GMC rims from a 2016 HD do u think they will fit my Chevy.
Figure out if they are the same bolt pattern and find out what the wheel specs are so you can check our gallery to make sure those specs will fit your truck!
Would a universal Ford rim fit and Chevrolet
Shoot us an email to info@customoffsets.com they need to have the same bolt pattern
Can i put a Ford focus 4 lug on a lancer 4 lug
Ok.......... Somebody help me out. 2017 Wrangler JK: I want solid Steel wheels capable of dog-dish caps. Mopar makes Steel Wheels for Ram Trucks. Will these wheels fit a 17 Jeep JK ?
I ordered Lug Nuts with my new set of rims and tires, because I didn't know how to determine size of lugnuts I needed they sent me lug nuts size of ( 14x2.0), it turned out that was the wrong size. I didn't know how to determine what size lug nuts I needed so I ran to my local parts store. The local parts store determined from fitting old lug nut I needed a 14x1.5, which they had in stock. When I got back to install new lug nuts on my truck I tried to install new lug nuts on truck but they would only thread about 1/8 of an inch. I stopped at that point because I didn't want to strip the threads on my studs. I'm at a loss with figuring out what to do!
Shoot us an email to info@customoffsets.com so our experts can help you man! 🙏
Great explanation Kirk!
Hdcng
Djfh
Chrysler 300 is a 5x115 what fits
My bolt pattern is 5x114.3. Would a 5x120 be ok?
Please email us at info@customoffsets.com
I recently bought a set of BBS wheels for my 1993 Ford Probe GT and the factory wheel specs are 16x7 5 lug 5x114.5 and the BBS wheels I bought are 16x7 5 lug BUT 5x120. I REALLY hope there is someway I can make these fit. Because the wheels are 5.5mm too big will they still fit?? Idk what to do!! Somebody please help!! I’m very worried!!
ALWAYS make sure you are buying the correct bolt pattern. You can however order wheel adaptors to make them work. Check out our friends at fitmentindustries.com
I have some wheels that are 5×5 and my jeep bolt pattern is 5×4.5 I have to get the adapter that goes from 5×4.5 to 5×5 ?
Yes!
5:02 if you're seeing 8 "extra" holes, you're missing few bolts... : )
Heck with the extra holes! I'm still trying to grasp the whole negative and positive offset thing. Now I have to figure out what to put in the extra holes. I'm sure I can JB weld spikes in those empty holes!!😉
Is it ok to have 5x115 wheels on a 5x114.3 lug?
Definitely not recommended, I'm sure people have done it though
@@CustomOffsetsTV well it entered my wheel but the bolts on the aftermarket wheels were to big to enter my lugs so I bought wobble bolts and it worked? I'm not sure if the wheel is a 115x5, or a 5x114.3 what do you think because all lot of the times offmarket wheels use the same size for both of those bolt patterns
Corolla 2011 is 5×100 but can I put other sizes like 5×112 or 5×114.3.
No, you would need adapters at the least
5x112 fits with wobblenuts/-bolts.
What the bolt pattern on my 98 mc
We would recommend googling your year make and model's bolt pattern!
So I have a 2008 G6 tht take 5x110mm can a 5x115 fit?
No, that will not fit. Check out Fitment Industries for some help with your car!
What brand is that 5 lug
bit.ly/2vDlUQP check it out here Hugo
Can someone send me a link of some sweet wheels that will fit a 2005 chevy cobalt
We sell truck wheels! Check em out here!
Customoffsets.com/wheels
Question🙂. Will a 5x4.5 wheel fit on a 5x120.?
No it will not, you need a specific bolt pattern match
I don’t care about them spike lug nuts, I don’t like them at all!
Sooo a 6 lug Chevy can fit a 6 lug ford ???
So my fitment is 5x5.5 pattern thanks kirk!
Is that on a ram
@@simply-_- yes
im bout to see if a 2000 zx2 wheel will fit on an Accent
Bring back shawn
What's the song