Eli, great tutorial--you think everyone know this but honestly you would be surprised--so these are always good. This is like TED talk for car guys/gals. Keep it up!
Whenever I’ve upgraded to aftermarket wheels, I pick my diameter wheel first. From there, I do the math on tire width and aspect ratio to get the same diameter so as to not mess up speedometer/odometer etc. (ie; 15” wheel with 165/75 is about the same as 17”, 215/40) then Try to match backspace to oem. And add to poke. Get more footprint, while adding stability.
Paused video to make this comment at 4:10 in the video and haven’t heard the word backspace. Very important to not have inner contact probably more than fender contact since fenders can be rolled, shaped, removed, etc. while the suspension really can’t move.
I have a question for the bolt pattern, ive heard it work but i just want to get some clarification, will a 5x114.3 wheel fit on a 5x115 bolt pattern, the difference is very very little, i just want to be sure.
Hey any chance you could help me with a b7 a4 wheel fitment? i really want the nuespeed NEUSPEED RSe11R i know the hub will fit. But what will give me flush fitment on it mind you i do have coil over. I wanna say 18x8.5 et45 would be perfect but im not sure.
This is exactly what I was looking for! I'm looking into a set of 20 inch wheels for after the winter passes and I'm planning on getting the Michelin Pilot Sport 4S on my 2013 S4. I'm new to the wheel game, so this video came at a great time haha Keep up the good work, dude!
Dude. Love your video. Quick question: I have the 19*9 stock s5 wheel just like you ordered in the video. If I change wheel and keep the tires I cannot buy the wheels with 19*8.5, did my understand correctly?
Love your RUclips Channel content and a fan of your mods selection and knowledge. Recently watched this video of yours regarding wheel and tire fitment and am wondering if you could please advise on mine. Have a BMW F10 2016 5 Series. The OEM wheels are 19x8.5 with 33 offset on 245/40 19 (Square fitment). I want to run a staggered fitment on this in 19 or 20 inch. Wheels specifically that I am looking for ideally are the Ferrada FR2. To try and achieve the most concavity can I in the front run 19x9.5 offset 35 with 245/40 19 and the rear 19x10.5 offset 35 with 285/35 19? Will be lowered on H&R Springs. My car is a xDrive so need to keep the difference under 1%. Will this fitment be flush or will there be poke. Will I have any rubbing or scraping issues. Very concerned about the inside of the front wheel touching the control arm. I think it will just not sure. Could you advise on all please with your knowledge on this. Please advise on both, 19 and 20”
@ignitionTube have you ever tried running a 10" wide wheel? I have a set of 20's +45 offset I'll be trying in the spring I'm hopping they will fit and not rub on the strut.
Good explanation Eli! Curious as to why you chose to spend the money to have a more flush wheel for winter if they're going to get messed up? I'm in South Florida (actually next to Lambo West Broward) so I have zero idea about what seasons are minus hurricane season lol.
Kyle! Will we see you at the unveil on Saturday? 10-1, DoctaM3 and I will be at Lamborghini Broward. As long as I don’t hit the curb, they shouldn’t get more messed up. I bought a second set of wheels for winter to mount tires on
Ik this an old video, but let's say I don't have access to my e46 touring right now due to some issues, but I'm planning on buying some new shoes. Should the e46 fitment be exactly the same cuz there isn't a ton of info about 2001 touring e46's fitment?
Hey question I just bought some peelers for my b8 a4 avant. The wheels are 19x9 et 52 with 255/35/19.what spacers would you recommend in order to be flush?
I have question pls I have Audi A5 I have brought some alloys but I been told they won’t fit because it’s 19ich by 5x120 and my original alloys on the are 19ich by 5x120 so will it fit or what can I do to make fit pls
@@IgnitionTube lol understood... But an extra 15mm of material seems like it would throw a lot of things off requiring ET lug bolts more scrub radius another others... I guess I'm just really hoping I get that deeper curve... Just ordered some Konig Interform rims in a 19x9.5, 25ET we'll see I guess!
You forgot to mention anything about the Diameter of the the Hub Bore. If the wheel Center Bore is smaller than your stock Hub Center, the wheel won't fit, even is the bolt pattern is the same i.e.5x112. If is larger, then you're gonna need Hub Rings to fill the gap and reduce potential vibration while driving at higher speed. I believe your S4 stock Hub Bore is 66.5 if the new wheel's Center Bore is 72.1 for example, the a hub ring is paramount, else expect some type of vibration.
Quality spacers are still cheaper than whole new set of wheels .. I'm running my stock S4 peelers which are et43 btw not 45 , with 13.5mm all around and they're flush but to each their own. Either way car looks good. Hopefully people watch this vid so there's less "will these fit my car?" On the forums lol
Hi I got a 1985 Cutlass Supreme I know you do a lot of Audis and everything else does wonder if you can help me I watch your Channel on other things but I'm trying to find out how to if you could determine by me giving you the rim size 22x 9.5 Iroc rims you can see him on eBay all over for 1200 bucks on the car and offset +10 and the adapters that used are 1inch in back 1/8 or quarter in front can u plzs help me do some math I got PTSD not a lot of other mental problems from I'd rather not talk about that. If you could really help me by doing some math and some research 1985 Cutlass Supreme the car is listed so it's no worries they're just worried about hitting the frame in the back that's why they had adapters on there so I kind of want to add that to the equation so then when it bolts up to be like having the adapters without having them so much safer in the rooms bolted on I called several shops trying to buy rims have a little bit of money and not rich by no means my Social Security because the incident that happened to me if you could please help me I would really appreciate it
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Been watching how-to fitment videos for a few weeks now and this is the first that was truly understandable. Thank you
Great video. One of the best explanations I’ve seen on this subject. Keep these S4 videos coming. 👍
Thanks! :D
Eli, great tutorial--you think everyone know this but honestly you would be surprised--so these are always good. This is like TED talk for car guys/gals. Keep it up!
will these wheels fit my e36? asking for a friend
will your E36 fit my friend? asking for a wheel
I've been trying to figure out the offset I want for my mk7. This really helped!👍
Wow this video just explained so much. I was so lost with offset and width but now I actually have a general idea.
Whenever I’ve upgraded to aftermarket wheels, I pick my diameter wheel first. From there, I do the math on tire width and aspect ratio to get the same diameter so as to not mess up speedometer/odometer etc. (ie; 15” wheel with 165/75 is about the same as 17”, 215/40) then Try to match backspace to oem. And add to poke. Get more footprint, while adding stability.
This is the best video ive seen about offset!
Paused video to make this comment at 4:10 in the video and haven’t heard the word backspace. Very important to not have inner contact probably more than fender contact since fenders can be rolled, shaped, removed, etc. while the suspension really can’t move.
Wonderful stuff how do you match a multi bolt pattern to vehicles
I have a question for the bolt pattern, ive heard it work but i just want to get some clarification, will a 5x114.3 wheel fit on a 5x115 bolt pattern, the difference is very very little, i just want to be sure.
How about a video on what brand will fit what brand , like will stock chev rims work with a ford or dodge or both or neither
stock s4 peelers are et 42
Hey any chance you could help me with a b7 a4 wheel fitment?
i really want the nuespeed NEUSPEED RSe11R i know the hub will fit. But what will give me flush fitment on it mind you i do have coil over.
I wanna say 18x8.5 et45 would be perfect but im not sure.
This is exactly what I was looking for! I'm looking into a set of 20 inch wheels for after the winter passes and I'm planning on getting the Michelin Pilot Sport 4S on my 2013 S4. I'm new to the wheel game, so this video came at a great time haha
Keep up the good work, dude!
heck ya!!
Did you rub with VMR wheels?
So can I fit 19 9.5 et35 oem suspensions on rear ? And not gonna be rubbing
Can 5x115 fits on 2018 Terrain?
Thanks in advance.
I can’t thank you enough for making this video
Dude. Love your video. Quick question: I have the 19*9 stock s5 wheel just like you ordered in the video. If I change wheel and keep the tires I cannot buy the wheels with 19*8.5, did my understand correctly?
Great video. One of the best explanations I have ever seen !!!
Heck ya! I did my research :Dd
Love your RUclips Channel content and a fan of your mods selection and knowledge. Recently watched this video of yours regarding wheel and tire fitment and am wondering if you could please advise on mine. Have a BMW F10 2016 5 Series. The OEM wheels are 19x8.5 with 33 offset on 245/40 19 (Square fitment). I want to run a staggered fitment on this in 19 or 20 inch. Wheels specifically that I am looking for ideally are the Ferrada FR2. To try and achieve the most concavity can I in the front run 19x9.5 offset 35 with 245/40 19 and the rear 19x10.5 offset 35 with 285/35 19? Will be lowered on H&R Springs. My car is a xDrive so need to keep the difference under 1%. Will this fitment be flush or will there be poke. Will I have any rubbing or scraping issues. Very concerned about the inside of the front wheel touching the control arm. I think it will just not sure. Could you advise on all please with your knowledge on this. Please advise on both, 19 and 20”
the name of that model of audi rims pls!!!!
2012 S4 peelers. Would they fit on a 2008 Audi TT 19’
@ignitionTube have you ever tried running a 10" wide wheel? I have a set of 20's +45 offset I'll be trying in the spring I'm hopping they will fit and not rub on the strut.
Hey I have the S5 peelers 19x9 33et my 2016 cc. Do you know the center cap size?
What wheels, with offset, you recommend for a Audi A7? Thanks in Advance!
Are you coming out with Ignitiontube merchandise?
So if I get rims that are 30 offset, it’s not gonna fit on my car that has 45 and 35 offset?
Good explanation Eli! Curious as to why you chose to spend the money to have a more flush wheel for winter if they're going to get messed up? I'm in South Florida (actually next to Lambo West Broward) so I have zero idea about what seasons are minus hurricane season lol.
Kyle! Will we see you at the unveil on Saturday? 10-1, DoctaM3 and I will be at Lamborghini Broward.
As long as I don’t hit the curb, they shouldn’t get more messed up. I bought a second set of wheels for winter to mount tires on
Ik this an old video, but let's say I don't have access to my e46 touring right now due to some issues, but I'm planning on buying some new shoes. Should the e46 fitment be exactly the same cuz there isn't a ton of info about 2001 touring e46's fitment?
Hey question I just bought some peelers for my b8 a4 avant. The wheels are 19x9 et 52 with 255/35/19.what spacers would you recommend in order to be flush?
Great video, wish i'd have seen this before trying to fit Audi rotors on a mk6 Golf lol
LOL
Looking for those wheels. Where can I buy?
So if i would wanna have my wheel poke out a bit for a mk4 gti, the ET should be 40 instead of 35 for instance?
the opposite,the lower the ET the more it pokes out.
I put S5 rotor wheels on my S4. They fit perfect
thats one of my favourite setups
What offset did you have on the GTI VMRs? And how much of a drop did you have? (Coilovers)
Woodsmaster I also want to know this, wanna buy a set for my mk5
I have question pls I have Audi A5 I have brought some alloys but I been told they won’t fit because it’s 19ich by 5x120 and my original alloys on the are 19ich by 5x120 so will it fit or what can I do to make fit pls
The Audi S5 bolt pattern is 5x112. 5x120 wheels won't fit.
@@IgnitionTube so what would you recommend to make them fit pls
For the same wheel say 19x9.5 sold in a +40 and +25ET... The +25 should have more concavity and the same mounting area thickness right?
*should*
@@IgnitionTube lol understood... But an extra 15mm of material seems like it would throw a lot of things off requiring ET lug bolts more scrub radius another others... I guess I'm just really hoping I get that deeper curve... Just ordered some Konig Interform rims in a 19x9.5, 25ET we'll see I guess!
wait, so positive offset pushes the center inwards? I thought it pushes the hub outwards.
No, pushes the hub out
Are there 20” Peelers available anywhere?
Yes but they’re not great offset or concavity
@
Thank you!
I’ll just go with 19” Peelers and lower my A6 or perhaps 20” S5 Rotors
Where can I buy S4 wheels for good price???
Nice video Eli! Great explanation!
thanks Carlos!
You forgot to mention anything about the Diameter of the the Hub Bore. If the wheel Center Bore is smaller than your stock Hub Center, the wheel won't fit, even is the bolt pattern is the same i.e.5x112. If is larger, then you're gonna need Hub Rings to fill the gap and reduce potential vibration while driving at higher speed.
I believe your S4 stock Hub Bore is 66.5 if the new wheel's Center Bore is 72.1 for example, the a hub ring is paramount, else expect some type of vibration.
I felt like I was watching a ViHart video with the diagram and visual math. Thanks for sharing.
Good job
Also anyone know where best place to find bolt pattern specs? (it's not on the wheel itself)
Just google the "pcd" is for your car make and year it should be easy to find 👌🏻
Mk6 golf has a 5x112 pcd and a centre bore of 57.1 (if it's smaller your wheel won't fit)
Very well explain !
Can you do a tow strap install tuto? :)
Can I buy your stock wheels?
Can't wait to see some snowy awd donuts :)
Definitely great video !
Thanks for the good explanation dad
you're welcome son
winter setup? or future air ride confirmed?
future air ride confirmed
Good info man
I wish this didnt make my head hurt as much as it does
Quality spacers are still cheaper than whole new set of wheels .. I'm running my stock S4 peelers which are et43 btw not 45 , with 13.5mm all around and they're flush but to each their own. Either way car looks good. Hopefully people watch this vid so there's less "will these fit my car?" On the forums lol
That's a whole lot of spacing!
Good video. Mind blown.
*the more you know* LOL
Another great website I use... www.wheel-size.com/calc/?wheel1=215-45-17X7ET53&wheel2=225-45-17X8.5ET40&fcl=50mm&wcl=30mm&scl=50mm&sr=0mm
lots of good sites!!
Confusing
Hi I got a 1985 Cutlass Supreme I know you do a lot of Audis and everything else does wonder if you can help me I watch your Channel on other things but I'm trying to find out how to if you could determine by me giving you the rim size 22x 9.5 Iroc rims you can see him on eBay all over for 1200 bucks on the car and offset +10 and the adapters that used are 1inch in back 1/8 or quarter in front can u plzs help me do some math I got PTSD not a lot of other mental problems from I'd rather not talk about that. If you could really help me by doing some math and some research 1985 Cutlass Supreme the car is listed so it's no worries they're just worried about hitting the frame in the back that's why they had adapters on there so I kind of want to add that to the equation so then when it bolts up to be like having the adapters without having them so much safer in the rooms bolted on I called several shops trying to buy rims have a little bit of money and not rich by no means my Social Security because the incident that happened to me if you could please help me I would really appreciate it
I'd rather just find random 225 inch steelies and stretch a 185 inch rubber onto it. Saves me 7 minutes of this video :P
*That marker on cardboard is disturbing to the ears! I know I know this has nothing to do with the information in the video. Lol*
Concavity
Psy duck psy.....