Thanks, I have been working this project out in my head for a bit. Bonus was I already had the Vettekart, just wasn't sure what I was going to do with it.
Thank you, I believe this is going to be a great hot rod when I get it finished! Hope to get some time soon to get back on it. Thanks again for watching.
@LANDISPERFORMANCE yes im trying to fit ctsv 4 piston calibers to c4 corvette suspension my build is type 3 v.w fast back body to c4 corvette suspension front and rear have steel for frame will be norrowing suspension
Thanks for watching again! I'm not sure what rims I will use, if money were no object, it would be a BBK gold center, polished outer lip, like they used in the IMSA GT series days. Billet specialties has a Redline wheel www.billetspecialties.com/store/wheels/redline/redline-cars/redline-custom-built/item/redline-17-diameter-custom-built-rs07-17-custom/ or CCW wheel ccwheel.com/wheels/ccw-d240-three-piece-forged-wheels/ or something like that. 18 x 11 square
You are amazing. Thank you for this. Vette frame is almost skateboard like when the body is off of it. I was worried how I was going to do this but narrowing the frame with those beams, not only make the fitting of the car so much easier but also I feel like it's so much more conventional. I just picked up an 87 c4 convertible to put the body of my '74 bmw 2002 lol
Thanks for watching and the comment! To me this way makes alot of sense. And as you said much easier to mount the body. Working on part 2. So I will enable to simulate were the floor is and install me seats, then I can figure out how low I can mount the new body.
Thanks for the comment, I am close to releasing part 2, unfortunately other projects have slowed down the progress on this project. But part 2 is coming! Stay tuned
Thank you ! I am really looking foreword to it. I love the way you narrowed the c4 frame. I have an early c4 now. it was very interesting to see some of the hidden details of the c4 frame.
Not you going to do I put 2019 silverado 4 piston calibers and bigger rotors on my 1999 silverado stright bolt up with one sim do you have a Patton page
@@PeterHatch-mx7zc sorry I don't have a website, to much for one person to keep up on, especially right now, since parts are hard to get from the manufactures. If you need help with any parts, feel free to send me an email, go to the my main RUclips page, and you will find my email info there. Thanks for your comments!
Not much to update on the Oleynik race car hauler. Have been trying to get some customer rides finished up, so it has slowed down new content, but I do have a bunch of content to finish editing, so subscribe, ring the bell so you get instant notification when I drop more videos. Thanks for the comment
Yes back watching it again
This is a great project thank you for sharing you skills on this build love it ! Hell ill buy you fuel and tires for auto cross
Thanks for watching again! Hope you watch part 2, I will be dropping part 3 in the near future.
Really nice job.
Thanks Chris!!
I really like how you mated the two together. Looking forward for more episodes!!
Thanks, I have been working this project out in my head for a bit. Bonus was I already had the Vettekart, just wasn't sure what I was going to do with it.
@@LANDISPERFORMANCE looks great looking forward to part two!!!
Awesome project George. Initial body fitment looks great. If you need any help give me a shout.
Thanks, had this in my mind for a while. So far, so good.
Had to watch it again👍😊
Thank you, I believe this is going to be a great hot rod when I get it finished! Hope to get some time soon to get back on it. Thanks again for watching.
@@LANDISPERFORMANCElove it keep coming back to thks again for a great video
Fantastic project, I will be following this closely!
Thanks for the comment. I think it will be a great blend between both cars.
Now your talking im here this is a great project credit to you!!
Thanks for the comment! I believe this will possibly be a great autocross/track attach car, also able to cruise with the A/C on
@LANDISPERFORMANCE yes im trying to fit ctsv 4 piston calibers to c4 corvette suspension my build is type 3 v.w fast back body to c4 corvette suspension front and rear have steel for frame will be norrowing suspension
That sounds like an awesome project as well.
Im back watching it again just a suggestion the rims used in trans am 69 / 70
Thanks for watching again! I'm not sure what rims I will use, if money were no object, it would be a BBK gold center, polished outer lip, like they used in the IMSA GT series days. Billet specialties has a Redline wheel www.billetspecialties.com/store/wheels/redline/redline-cars/redline-custom-built/item/redline-17-diameter-custom-built-rs07-17-custom/ or CCW wheel ccwheel.com/wheels/ccw-d240-three-piece-forged-wheels/ or something like that. 18 x 11 square
Good job George. Can’t wait to see how this turns out.
Thanks, it should be great!
Very cool build I
@@carnuttt thanks for watching and commenting!
You are amazing. Thank you for this. Vette frame is almost skateboard like when the body is off of it. I was worried how I was going to do this but narrowing the frame with those beams, not only make the fitting of the car so much easier but also I feel like it's so much more conventional. I just picked up an 87 c4 convertible to put the body of my '74 bmw 2002 lol
Thanks for watching and the comment! To me this way makes alot of sense. And as you said much easier to mount the body. Working on part 2. So I will enable to simulate were the floor is and install me seats, then I can figure out how low I can mount the new body.
Hello sir, I signed up for part 2 of Vettehawk. I may have missed the latest info on this.I searched and didn't see anything. Is there a part 2 yet ?
Thanks for the comment, I am close to releasing part 2, unfortunately other projects have slowed down the progress on this project. But part 2 is coming! Stay tuned
Thank you ! I am really looking foreword to it. I love the way you narrowed the c4 frame. I have an early c4 now. it was very interesting to see some of the hidden details of the c4 frame.
Have you seen the father and son Monza corvette body swap I think it’s spider garage
Yes, you are correct @spydergarage is Ken and his son Nathan, they are also build one of these body swap H bodies to a C4 frame.
Can't be the only one that saw the tortoise in the background 😅
LOL! My wife's pet. He's a big dude.
Call me if you need an extra set of hands!
Thanks, I'll let you know
You more than do know easy to mount c5 brakes to c4 corvette
Yes the front are very easy, the rear alittle harder. I have a complete C5 brake system I will be installing.
Not you going to do I put 2019 silverado 4 piston calibers and bigger rotors on my 1999 silverado stright bolt up with one sim do you have a Patton page
@@PeterHatch-mx7zc sorry I don't have a website, to much for one person to keep up on, especially right now, since parts are hard to get from the manufactures. If you need help with any parts, feel free to send me an email, go to the my main RUclips page, and you will find my email info there. Thanks for your comments!
'Promosm'
Not sure what this means?
BRO WHAT HAPPENED TO THE CAR HAULER THAT THING WAS COOL AS CAN BE LOVE THE CHANNEL WISH YOU COULD POST MORE
Not much to update on the Oleynik race car hauler. Have been trying to get some customer rides finished up, so it has slowed down new content, but I do have a bunch of content to finish editing, so subscribe, ring the bell so you get instant notification when I drop more videos. Thanks for the comment