It is a nice tutorial video on changing valve cover gasket. You just have to be careful disconnecting the coil pack cable. be careful not the snap or break the connector
The sequence is typically you tighten the nuts from inside-->out in a cross pattern. Should be only about 8-10ft/lbs. Really you should just hang tighten, don't crank them.
![HOW TO Valve Cover Gasket Replacement 2010 - 2017 Toyota Camry 2.5L 2AR-FE [SAVE MONEY]](http://i.ytimg.com/vi/ZmuUGDRTRBI/mqdefault.jpg)
It is a nice tutorial video on changing valve cover gasket. You just have to be careful disconnecting the coil pack cable. be careful not the snap or break the connector
*Parts & tools listed below:*
Valve cover gasket set: amzn.to/3P4Ibz2
Sealant: amzn.to/3ImADE3
Socket/wrench set: amzn.to/3Ipjxpq
E socket set: amzn.to/3V39q0Y
Wobble extension set: amzn.to/3TnPjcH
Pick tool set: amzn.to/48LKeyZ
Plastic razor: amzn.to/49GLbdw
Pry bar set: amzn.to/3SV6il2
Electric ratchet: amzn.to/3TwPBOx
BEST bang for buck scantool: amzn.to/4a2wEbT
#ad
didnt show vc bolt install and torque sequence?
There is a sequence
What is the sequence, and what is the torque spec?
The sequence is typically you tighten the nuts from inside-->out in a cross pattern. Should be only about 8-10ft/lbs. Really you should just hang tighten, don't crank them.
Do you still recall the rpm idle in park or neutral position at normal temperature? Mine is at 780 rpm and it seems too high
Sounds like normal with the ac on
What is the lubricant and sealant that you used called? Thank you
Links in description
Whats the lubrication you use for spark plug seals ?
Just motor oil
What was the torque spec for valve cover bolts?
Just tighten them down with a 1/4 inch ratchet, it should be fine
Call local Toyota dealer they will tell you.
@@ncvman8 ft. lbs.
Is this a 2ar-fe engine ,2.5 L ?
Yes
Yes
good video thanks ready to install now
Good video. Thank you.