I love this video because it shows all the labor involved in making a decent pin. I get so freaking tired of people bitching about enamel pin prices and trying to order just one . It’s a lot of steps!
Thank you for teaching me all the steps involved. I will never be upset at the cost of pins again now that i understand more. Also embarrassingly i should remember to apply this thought reflection to the rest of my life😅
1.Cut out some squares of copper. 2. Smooth the edges 3. Buff the surface. 4. Air brush blue paint on the surface. 5. Apply a black and clear sticker. 6. Store it in your air tight plastic bag. 7. Place in case. 8. Turn case on. The case will get rid of the plastic bag. 9. Put blue copper in liquid. 10. Scrub until design shows up. 11. Hot glue wires to the back. 12. Clip to side of bucket with liquid. 13. Turn something on. This will turn the liquid blue. 14. Remove from bucket. 15. Put paper over the design and spray it with liquid. The paper will dissolve. The blue will come off. 16. Cut out the design with your jigsaw. 17. Smooth and buff the edges. 18. Solder the pins to the back. 19. Buff the front design. 20. Paint your design. 21. Put in kiln. 22. Buff once more. 23. Attach to something.
As someone who's entire career has been in electroplating you think I would have thought of etching pieces of metal on my own a lot sooner lmao, thank you for the great video though I'm incredibly appreciative
Thank for this video. While not a tutorial, it gives enough technique information that anyone should be able to develop the system and skills. However, I read through the comments and see that many have requested a tutorial type video, and I'm excited that you are considering it. Looking forward to future videos...and now, I will make some notes on how to use your video to make metal pins. I have most of the equipment, but simply need some materials. Thank you!
Love the vid, actually would love to try and make some of these at home and couldn't find anything like this out there, it would be very much appreciated if you could please consider making a video or multiple, going into more depth about how it is done. Thanks for this amazing content
Thanks for sharing, dude. This really gives a great idea of the hard work behind it. I was checking some to buy and thought they were bit expensive, but after seeing this video, now I think they're hell'a cheap.
Hey I was wondering if you could make a video where you show everything that you need to make those pins, and by that y mean the tools and materials that you are using, because I want to start doing this as a part time job. Thanks
There's a lot of artists out there that I know would love to be able to do this at home if they had the tools and the know-how. We just need someone to bring that to us in a simplified version.
Could you put the list of materials and specs in the description? Do you think that is it possible to use a laser engraver to remove the protective layer before the etch? This could save a ton of work.
Do you think you could make a video explaining the process behind it? This is super cool, and it'd be awesome if you made a video describing what you're doing.
Well that was pretty quick.. I would like to know about process.. I mean whats that sticker at the begining.. ? and why it has to go through the electric current ?
Honestly i always wondered how it was made, i think its beautiful you compiled a video like this to showcase your hard work! I probably wouldn't purchase all the tools just to make enamel pins but to experience making one would be awesome. keep it up!
This is fantastic would love to know what equipment and materials you use throughout. I know I would and I’m sure others would be more than happy to pay for seeing a detail process (as long as it’s not ridiculously priced) nothing else like it on the internet.
What is your process for acid etching? Vinyl sticker on painted base then laminated? Before put under uv light then put to soak into a bath of liquids with negative attached to piece from battery charger?,
That's a lot of work... and money! I have to raise a lot of money to purchase all this equipment. Looks like its best to go to a manufacturer to start off.
Bonjour monsieur , excellent travail ! Excellente vidéo ! Pourriez-vous m’indique le nom des différents appareils que vous utilisez svp ? D’avance merci .
I was just curious, for the enamel are you just using regular enamel that you mix with a solution into a paste and then pack it in the empty creases? Or is there actually a liquid enamel? Also what temperature are you firing the enamel at in the oven?
@@PaulsDreamWorkshop Hello, I've been trying to do the same thing except I'm not getting the desired results when I'm painting, could you possibly tell me what tools you use when painting? They seem very accurate and I need something like that for my application.
I am fascinated by the work of doing it by hand step by step, I would like to know if you would be so kind, what do I need to do that, machines, utensils, paint, etc.
It's almost like acid washing PBC boards but I don't know what that mysterious case is. Then electrolysis? Polish braze touch up....can I buy these things at a local hardware store? Watched it again I think I understand thanks!!
Great work! At the 2:22 mark. I see an elf throwing up 3 colors. What is used to separate the colors? Was the process done differently for this pin? Thank you
curious why the opt for eletro etching over just straight solution of some sort? been wanting to do this, had soem success with Ammonia persulfate and basic vinyl mask cut with a cricut
nowhere does it say or was it implied that this is a tutorial. they’re enamel pins… like you think people make them with scissors and water colors or something?😂
@@peen2804 the title of the video literally says "how I make enamel pins at home", and it appears as a result when you search for a tutorial, so bI0w me. And no, I don't think they're made with crayons, but I know they can be made at home with stuff that can actually be found at home or is easy/cheaper to get. Crafsman has a good video about it.
Look up chemical etching supplies, you’ll find it for custom diy PCB making. PCB = printed circuit board. Only do it in a well ventilated area, or risk harm.
Bravo, that is an amazing process, I didn't know just how beautiful the enamel pin making process was! The Chinese have truly stolen the profitability of an art such as this one!
I knew it would be an intense process but god dang. I'll leave it to you folk XD Criminal that people pay so little for a pin that requires so much effort, time, materials, and equipment. Love that No Internet pin btw (i love them all but that one god a laugh out of me)
Old post but it's slightly different for mass produces badges. Metal will be stamped and by the time it's done a few million the final ones probably bear little relation to the first batch. Enamel will be drop fed using crude masks and any colour merging maybe ignored and sent out the door anyway. It's the precision of making sure the colours stay where they are supposed to be that I would struggle with.
Maravilloso trabajo! Cómo se llaman cada uno de los procesos que usas y como se llaman las máquinas que usas? Quisiera emprender con este tipo de negocio, pero no sé dónde conseguir las máquinas. Saludos desde México!
Do you make and sell . I need only 5 and can’t seem to find a place that don’t want to charge an arm and a leg. And it’s a basic design. 1.5” circle emblem. 2 colored.
The reason they charge so much, is for time, art, materials, effort, maybe employees, packaging and shipping. You have to take those factors into account for anything handmade like that, especially if it's custom. Hope you can find someone compatible to work with soon! 🤙
I would love to learn more about your process and how to make it scalable for an apartment. Do you think I could get away with getting PCB etching solution and copper sheeting and doing a sort of wax resist? I don't have the scale to do electroplating at the moment.
Hi! Thank you so much for sharing. I really want to start this as a hobby. May I know what equipments are essential especially for beginners? Thank you
@@PaulsDreamWorkshop Yes, as detailed as possible would be awesome. I have the capability to do this at home, but need some education and your work is very good.
I have some extra pointy end (I don't know what they're called) and I would like to glue them to some pins I have, what do I need to do that? what do you use?
I love this video because it shows all the labor involved in making a decent pin. I get so freaking tired of people bitching about enamel pin prices and trying to order just one . It’s a lot of steps!
I have never wanted to do something more in my life this looks like so much fun.
Dude sammmme.. it’s 3am though, why do my bright ideas come so late at night lol
No cap only one problem I think none of us have the tools for this 😂😂
And tiring!😭 Esp for us, to make just 1, with 0 skills would take us ages.
@@deadlegend3427 I’d break into my schools dt lab lol.
Thank you for teaching me all the steps involved. I will never be upset at the cost of pins again now that i understand more. Also embarrassingly i should remember to apply this thought reflection to the rest of my life😅
🤣
1.Cut out some squares of copper.
2. Smooth the edges
3. Buff the surface.
4. Air brush blue paint on the surface.
5. Apply a black and clear sticker.
6. Store it in your air tight plastic bag.
7. Place in case.
8. Turn case on.
The case will get rid of the plastic bag.
9. Put blue copper in liquid.
10. Scrub until design shows up.
11. Hot glue wires to the back.
12. Clip to side of bucket with liquid.
13. Turn something on. This will turn the liquid blue.
14. Remove from bucket.
15. Put paper over the design and spray it with liquid. The paper will dissolve. The blue will come off.
16. Cut out the design with your jigsaw.
17. Smooth and buff the edges.
18. Solder the pins to the back.
19. Buff the front design.
20. Paint your design.
21. Put in kiln.
22. Buff once more.
23. Attach to something.
This is asking for so much! What if I don't have something to attach it to?
@@Reavenk It’s useless then. You made it for nothing and it’s trash.
As someone who's entire career has been in electroplating you think I would have thought of etching pieces of metal on my own a lot sooner lmao, thank you for the great video though I'm incredibly appreciative
Finally, a video about how pins are made and not just how to order them
All I have to say, WOW! the amount of time and work.. my husband was trying to find a machine but after watching this! God bless you!!
Thanks! Actually small CNC for metal (small not equals cheap) can make pins like this. Not for production, 1-2 for yourself. If money not a problem :)
i have none of this stuff at home
Clearly you don’t own an air fryer
@@AlienAubrey I air fry my badges to make them
😂
😮
U know what to do
Amazing work! I collect pins and its awsome to see them made at home by an individual instead of in a factory by people that dont appreciate the art.
Thank you
Would really love a tutorial / walkthrough with more details of the process. Awesome pins man!
Wew i had no idea making these pins was this much work. Kudos to you man!
Thank for this video. While not a tutorial, it gives enough technique information that anyone should be able to develop the system and skills. However, I read through the comments and see that many have requested a tutorial type video, and I'm excited that you are considering it. Looking forward to future videos...and now, I will make some notes on how to use your video to make metal pins. I have most of the equipment, but simply need some materials. Thank you!
Thank you!
Love the vid, actually would love to try and make some of these at home and couldn't find anything like this out there, it would be very much appreciated if you could please consider making a video or multiple, going into more depth about how it is done. Thanks for this amazing content
yes please more detail or atleast a run down of materials and processes
*Nodding as if I actually remotely understood this process* "Ahh yes, so this is how enamel pins are made."
So much attention to detail, great job!
Thanks for sharing, dude. This really gives a great idea of the hard work behind it. I was checking some to buy and thought they were bit expensive, but after seeing this video, now I think they're hell'a cheap.
Thank you. I'm always glad to read such thoughts.
I would also like more detail and a list of materials and processes and where you got your equipment.
Hey I was wondering if you could make a video where you show everything that you need to make those pins, and by that y mean the tools and materials that you are using, because I want to start doing this as a part time job. Thanks
That's a lot of work. I'll think about it.
pls do this, i also wanna know
There's a lot of artists out there that I know would love to be able to do this at home if they had the tools and the know-how. We just need someone to bring that to us in a simplified version.
@@PaulsDreamWorkshop Do it. It's a lot of work but a video that will get a lot of views for years to come. That's why you're on youtube, right? ;)
I will never BS about the price when it comes to buying pin
Actually all sellers on etsy and other stores order from china factory for $0,5-1 and sell for $10. That is really sad.
Could you put the list of materials and specs in the description? Do you think that is it possible to use a laser engraver to remove the protective layer before the etch? This could save a ton of work.
Easy!!
I just lack a a few things.. for e.g. all the machines in the video..
This is one of the most beautiful processes I've ever seen, wow.. good job!!
Do you think you could make a video explaining the process behind it? This is super cool, and it'd be awesome if you made a video describing what you're doing.
Strangely relaxing and super interesting to watch, love the Patrick pin!
What brand are you using for enamel ? Having a hard time finding some
I did not think it was going to take that much work. Great job. I'll be on the look out for more videos and tips.
Thx!
Мужик, это достойно уважения! столько труда, ставлю жирный лайк
Can you explain what product did you use to paint, where to buy them, what to do and not do etc. Thanks, your video is passioning
Wow! This is one of the coolest videos I’ve seen in a while. Nice work, love the details.
Oh thanks doc, I do my Best :)
This is incredible. Never thought about electro etching
@@christianr.5868 thx!
Well that was pretty quick.. I would like to know about process.. I mean whats that sticker at the begining.. ? and why it has to go through the electric current ?
Honestly i always wondered how it was made, i think its beautiful you compiled a video like this to showcase your hard work! I probably wouldn't purchase all the tools just to make enamel pins but to experience making one would be awesome. keep it up!
Awesome video and awesome pins dude. You're super skilled
Thx!
Finally! Someone whose process isnt:
Step 1. Buy it online
Step 1 - drawing
Step 2 - order from china
Millions of views
Sad :'(
Step 1: have every tool under the sun
This is fantastic would love to know what equipment and materials you use throughout. I know I would and I’m sure others would be more than happy to pay for seeing a detail process (as long as it’s not ridiculously priced) nothing else like it on the internet.
Got to appreciate the detailed work!
holy moly, that's a lot of work
What matters is the results
What is your process for acid etching? Vinyl sticker on painted base then laminated? Before put under uv light then put to soak into a bath of liquids with negative attached to piece from battery charger?,
Hi what is the attachment you have on the rotary used for polishing
wow, this is so amazing! thank u for sharing!
thats badass! anytips for someone who doesn't have as big if a shop tho? how what i start and what tools should i get for metal carving?
¡¡Wow qué placentero ver el proceso!! ¡¡Pero más aún ver el pintado, cuánto detalle!!
Thx!
Just like the old Eastern Block pins. So cool!
Hello, do u have a list of the products and tools you use? greetings from Chile, South America
That's a lot of work... and money! I have to raise a lot of money to purchase all this equipment. Looks like its best to go to a manufacturer to start off.
That Limbo pin is sick!
You are doing a incredible job by hand, we use automatic machines by etchcut, we almost produce 3000 pcs a day, best wishes for your work
Thank you 🙂
Hi Stefan, how do you make the depth to the pins with the etchcut? i have that doubt thanks
Props!! This is hard work, my enamel pins end up being plastic artwork I custom file, the metal is too expensive for me
how did you make your pins? What tools and materials did you use?
This video is Amazing, what type paint do you use?
Bonjour monsieur , excellent travail ! Excellente vidéo !
Pourriez-vous m’indique le nom des différents appareils que vous utilisez svp ?
D’avance merci .
Looking at the process I know the badges are going to be expensive .
I was just curious, for the enamel are you just using regular enamel that you mix with a solution into a paste and then pack it in the empty creases? Or is there actually a liquid enamel? Also what temperature are you firing the enamel at in the oven?
oh damn i would love a tutorial on how you do some of these steps
I'll think about it ;)
@@PaulsDreamWorkshop Hello, I've been trying to do the same thing except I'm not getting the desired results when I'm painting, could you possibly tell me what tools you use when painting? They seem very accurate and I need something like that for my application.
My apologies if this has already been asked, but what tool are you using to fill the resin in with?
Nice work! Can you tell me what kind of paint you used? I'm Korean and I want to make my daughter a nice badges
Just use clear epoxy resin with pigments for resin
WOW!!! this is so impressive!!!!!
excellente vidéo j avais jamais vue la fabrication de Pins magnifique sa demande quand même un certain matériel . merci
Thanks!
omg this is awesome, I would love to be able to do that😭 you're incredible! ❤️
Thank you!
When you ‘cook’ the enamel, why doesn’t the solder soften and come apart?
There's low temp enamels too, probably some type of polymer/plastic which only needs around 150-200°C.
I am fascinated by the work of doing it by hand step by step, I would like to know if you would be so kind, what do I need to do that, machines, utensils, paint, etc.
Thanx. Im thinking about video with absolutly minimum tools to make.
@@PaulsDreamWorkshop May I ask what is each equipment/tool called and where did you order them?
I would like to know a tutorial on each tools used for this process
Where to get them how to use them etc.
- 0:01 Circular saw
- 0:09 Benchtop lathe ("polisher")
- 0:16 airbrush
- 0:20 vacuum sealer
- 0:24 UV Curing box (DIY?)
- 0:32 hot glue gun
- 0:36 power supply, *electroplating*
- 0:52 coping saw
- 1:00 disk sander ?
- 1:09 torch
- 1:13 rotary tool ("Dremel")
- 1:48 stereo microscope ("diamond setting magnifier")
Hello. congratulations on the pieces, very beautiful. what type of paint is used?
Epoxy based cold enamel.
Hey Pavel, what is the liquid you are rubbing the pins in at 2:02? Thanks for the video it's incredible to watch
Water, sandpaper, 3m polishing paste.
Would you be able to share the machines and tools that you used for the making of these pins? And where did you get the material?
It's almost like acid washing PBC boards but I don't know what that mysterious case is. Then electrolysis? Polish braze touch up....can I buy these things at a local hardware store?
Watched it again I think I understand thanks!!
Inside mysterious case UV lamps.
Great work! At the 2:22 mark. I see an elf throwing up 3 colors. What is used to separate the colors? Was the process done differently for this pin? Thank you
Thx. Same as all, only etched metal.
Awesome work! I would certainly buy an in-depth course.
Thank you!
curious why the opt for eletro etching over just straight solution of some sort? been wanting to do this, had soem success with Ammonia persulfate and basic vinyl mask cut with a cricut
Having a workshop full of equipment isn't what people think when looking for a way to do homemade stuff.
nowhere does it say or was it implied that this is a tutorial. they’re enamel pins… like you think people make them with scissors and water colors or something?😂
@@peen2804 the title of the video literally says "how I make enamel pins at home", and it appears as a result when you search for a tutorial, so bI0w me. And no, I don't think they're made with crayons, but I know they can be made at home with stuff that can actually be found at home or is easy/cheaper to get. Crafsman has a good video about it.
@@heroesytumbas it straight up says in the description "not a tutorial."
@@littlefox_100 read my reply above...
Очень красиво! Приятно смотреть на вашу работу. А какой толщины латунь идёт на ваши значки?
Опытным путем, 1.5 выглядит лучше всего.
What are you using to apply the paint? The little pen-bent needle type thing.
Just a needle in vise.
well you have inspired me. but what is the etching process. ? what liquid in the cups, and what current and how long does it etch for? so cool
Did you ever get your answer? I wanna learn but don’t know where to start
haven’t heard anything. still
trying to figure it out
Look up chemical etching supplies, you’ll find it for custom diy PCB making. PCB = printed circuit board. Only do it in a well ventilated area, or risk harm.
Bravo, that is an amazing process, I didn't know just how beautiful the enamel pin making process was! The Chinese have truly stolen the profitability of an art such as this one!
Привет, а на заказ делаешь значки или только в свою коллекцию? Значек космического рейнджера смог бы сделать и за сколько?
Incredible work, they look great.
Thank you
I knew it would be an intense process but god dang. I'll leave it to you folk XD
Criminal that people pay so little for a pin that requires so much effort, time, materials, and equipment.
Love that No Internet pin btw (i love them all but that one god a laugh out of me)
Old post but it's slightly different for mass produces badges. Metal will be stamped and by the time it's done a few million the final ones probably bear little relation to the first batch.
Enamel will be drop fed using crude masks and any colour merging maybe ignored and sent out the door anyway. It's the precision of making sure the colours stay where they are supposed to be that I would struggle with.
Maravilloso trabajo!
Cómo se llaman cada uno de los procesos que usas y como se llaman las máquinas que usas?
Quisiera emprender con este tipo de negocio, pero no sé dónde conseguir las máquinas.
Saludos desde México!
Do you make and sell . I need only 5 and can’t seem to find a place that don’t want to charge an arm and a leg. And it’s a basic design. 1.5” circle emblem. 2 colored.
The reason they charge so much, is for time, art, materials, effort, maybe employees, packaging and shipping. You have to take those factors into account for anything handmade like that, especially if it's custom. Hope you can find someone compatible to work with soon! 🤙
Look on AliExpress for “custom logo enamel pins” or something of that sort. They’ll normally hook you up for less than $2 a piece.
Hello,
Could I ask you what the pigment or paint that you use to fill for hard enamel?
It would be great if you give the Brand of paint.
Thank you.
That wolfenstein pin is dope af.
Hola! Que tipo de pintura usas y como la preparas ? Soy joyera y siempre me queda pegajosa
Hi. Epoxy resin based. Too low hardener?
I would love to learn more about your process and how to make it scalable for an apartment. Do you think I could get away with getting PCB etching solution and copper sheeting and doing a sort of wax resist? I don't have the scale to do electroplating at the moment.
Cool video. What are the stencils made from that you can vacuum seal it onto your primed plywood?
Lomond clear film for overhead projectors
Hi! Thank you so much for sharing. I really want to start this as a hobby. May I know what equipments are essential especially for beginners? Thank you
Hi. Dremel, jewelry saw and set of files would be more than enough. I started with it, everything else is only for speed up.
@@PaulsDreamWorkshop So wait… is that like acetate stencils, then the solution with wires reacting is what embossed it?
Кропотливая работа. Молодец.
I’m adding my vote here for a more detailed video if you ever get the time!
Realy want to repeat? Its wery dangerous process, high power and strong acids.
@@PaulsDreamWorkshop yes pleaseee in detaill
@@Lmfaoooikd yeah detailed process is needed and what materials u have used.U made some awesome pins.
@@PaulsDreamWorkshop Yes, as detailed as possible would be awesome. I have the capability to do this at home, but need some education and your work is very good.
What is that tool you use to paint the details on the pin?
Hand micro drill with needle.
That seems like alot of work. Lol
I am curious as to what type of paint that is though.
Cold enamel, epoxy based.
@@PaulsDreamWorkshop what is the mixing procedure
Dopenesssss!! Your pins are awesome!
real hand work for its lapel pin , good job . we are China lapel pin factory too .
Thank you )
Could you please make a video about how you attach the pin to the back. I’m trying to make a repair.
What material use in the beginning that golden one?
Brass sheets.
What's the metal erosion process?
Looking into all of this just have no clue how it's all done
I'll try to make more detailed video soon
Thanks for making this video, it’s Inspiring. Do you have a link for the epoxy paint? I would like to buy some. 😊
Brilliant work process and the end results are stunning :)
Thx!
Sir, could you please inform me of the ratio for mixing liquid photoresist with thinner, and which type of thinner do you use? Thank you very much.
I'm using acetone, 1/10-1/20, doesn't really matter, just to get through the airbrush
Es la misma emulsión que se ocupa para serigrafía???
@@bochelli No, it's used for PCBs, the kind used for screen printing is thicker and denser
I have some extra pointy end (I don't know what they're called) and I would like to glue them to some pins I have, what do I need to do that? what do you use?
I'm weld it with silver soldering paste. For gluing better to use epoxy.
Can u pls made a detailed video pls I am really interested