Ford NP273 Transfer Case - Dodge Input Shaft Swap
HTML-код
- Опубликовано: 15 сен 2024
- Tools I use:
Milwaukee 3/8" M12 Impact (bare tool) - amzn.to/3Etyxyt
Milwaukee 3/8" m12 Impact (kit) - amzn.to/2ZuUDBe
Milwaukee 3/8" Ratchet - amzn.to/3Bp4ru3
Milwaukee 1/2" Impact - amzn.to/3GtNUIU
Milwaukee Flashlight - amzn.to/3EtzeI5
Milwaukee Fuel Combo Kit - amzn.to/3w0ZVRq
In this video I show you how to swap an input shaft on a Ford NP273 transfer case. I swapped in a Dodge 23 spline input shaft so that I can use my 47rh transmission with this Ford t-case for my 2008 "Fummins" Build.
Dodge trucks with the Cummins diesels use the same NP271 and NP273 cases, so this process will be the same with those trucks.
Swapping the input shaft involves completely tearing down the transfer case, so even if you are not swapping the input shaft you will learn how to disassemble and reassemble this case.
Thanks for watching and help support the channel by using my product links, I appreciate it!
Disclaimer:
I AM NOT A PROFESSIONAL
Due to factors beyond the control of myself, I cannot guarantee against improper use or unauthorized modifications of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of myself, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Jake.
Haha that snap ring got you.. first timer. Great video. Dam as im typing this you called your own self out. Props 💯💯.. very helpful video. Id recommend you.
Well that looked pretty easy and pretty much confirmed what case I’m gonna put in my 1500 dodge off-road build. Tired of breaking 231’s and the rear slip.
Thanks for the video! This is exactly what I was looking for. Have a 2007 f-250 with a 12 valve. 5r110 just took a crap today. Going with a 47rh, was trying to decide if I should use Dodge t-case or see if a Dodge input would fit the Ford t-case.
No problem, couldn't find very much info when I was doing it so made this video for everyone else that wanted to go this route. Working perfect so far, no leaks no problems
Can i swap both the input and output shaft so i can convert the 271f to be a 271d? Thanks
Nice video! Keep up the great work! Thanks for sharing...👍
Was very helpful thank you
Nice job and very helpful.
I’m sorry but is there a link to the gear you bought? I’m doing the same conversion, also any drive shaft mods? Thanks
Bro thanks for posting !!
What are you going to do with the adapter play the fly wheel that went to the Ford transmission
hey guys could you help me with transfer case rebuild kit, 2006 ram 3500 cummins electric shifter, best web site to get it? thanks
Hey so what if my outer synchro ring broke the 3 tabs what would happen
Anyway you can explain to me how you got that transfer case extension housing off?
So the Ford and Dodge use the same front case half on the NP273?
how did everything work out. I’m looking at doing the exact same transmission.
Still holding up no problems
You don't need to take that big snap ring on the ring gear off
is there any fitment issue with the ford front t-case to the dodge transmission?
Nope fit perfect. Just need a seal spacer for the output seal on the transmission otherwise atf will leak in between the tranny and t case
I’m curious what this spacer is that you’re referring to? Looking to do the same thing but to a nv4500 soon.
Or just move it farther off the table. So the shaft wasn't on the table
Is it for sale
NVM. Do not beat in parts😢😢😂😂😂😂😅😅😅😅😅
nice
What happened to men. Men dont wear gloves. Hell my wife doesn’t even wear gloves washing dishes. I’ve tore tractors apart balers trucks semis you name it I’ve worked on it. Gloves does nothing but takes your feelings away. Be a man throw the gloves in the trash or give them to your wife an get your hands dirty! It wont kill you!!! Hell ive ate tobacco gum dirt trans fluid gear oil an whatever else ive had on my hands an i never get sick. Not even a cold why because my immune system’s good.
Used to think the same way until I realized how many wounds gloves saved me from. Even nitrile gloves can save you from some cuts in the right situations.
Is the ford and dodge uses the same front cas?