Это видео недоступно.
Сожалеем об этом.
5 Scroll Saw Tips I Regret Not Knowing Sooner
HTML-код
- Опубликовано: 15 авг 2024
- I LOVE my scroll saw, but it took me years to get there! These are the 5 things I wish I knew sooner and my top tips for success on your saw.
TOOLS USED:
Pegas 21" Scroll Saw: www.bearwood.c...
Scroll Saw Stand: www.bearwood.c....
Pegas Blades: www.bearwood.c...
*To save 5%, use code WENDELLWOODWORKS !
Watch this video to discover more on what blades to use: • Choosing The Right Scr...
SOCIAL:
👍 - FACEBOOK: / wendellwoodworks
📸 - Instagram: / wendellwoodworks
As a Bear Wood Associate, I earn a small commission from qualifying purchases at no added cost to you.
Thank you for the info your video provided. In terms of a scroll saw, what I found makes a better scroll saw is the how th eupper arm works, The cheapest saw that has a preferred arm is the Dewalt scroll saw. In terms of blades, I suggest precision ground blades, they cut straight and don’t wander to the side. And for practicing, that is a perfect use for scraps left from old projects.
Thanks, Scott!
Good tips, thanks! I haven't been scrolling long. I have a Proxxon DSH and was using the pinned blades it came with. But I recently got some pinless modified geometry blades and oh my the difference is incredible, they cut so much better and I have much better control.
Another tip: don't try using a spiral blade until you are actually good at controlling where you're going. I decided to do my first practice with a spiral on several layers of stiff card. It was hilarious. Needs a different approach from using standard blades, you can't just reverse up like with a flat blade because it'll carry on ploughing backwards through your material 😂
Yay! So glad you love the modified blades! Yea, spirals can be tricky! They have their uses, but I usually stick with the flat blades :). Thanks for watching!
Hey l got the same scroll saw!! I also bought pegas modified geometry blades but my problem is the vibration!! I’m wondering if my wood table l attached it to isn’t heavy enough? What are you using as a base?
Wow!
That pluck you gave the blade is way up into the E string of the fiddle.
That's seriously tight.
Wish me luck.
I have not a clue.
-- 7.9.24
Good luck!! 😊
Good info. Thanks. Figured I’d try a scroll saw so I got one off Facebook. Got a craftsman, only problem it doesn’t come equipped with a saw dust blower, are there any after market add ons that you know of ? Thanks
Hi! Thanks for watching! I’ve never tried it, but have heard from several others that they use a fish tank air pump!
How much air does the blow compressor is supposed to blow out? I just got my pegas but it throw out very little air like barely even feel it. For some reason I feel in your videos it throws much more air could be wrong. Maybe that’s how it’s supposed to be but I was wondering. I just tried it for the first time and seemed to me like it was very little air.
It won't be a lot, but enough to blow off the fine dust so you can still see your line while scrolling. If it's not doing that there might be a problem...congrats on the pegas!! I hope you love it!
What is your source for thin MDF? I can't find it anywhere including the big box stores and my favorite 3 thin board suppliers.
Yea, Lowes and Home Depot sadly stopped selling it in project panel sizes, but still sell it in giant sheets you can get cut down. That said, it’s not always the best quality. I have a local lumber store by me that carries it. You can also buy it is small sheet form from Amazon, though it’s more expensive that way. Hope that helps!
Great information.
Thanks for watching! 🙂
Thank you! 🙂
Thanks for watching! 🙂
Fantastic video!
Thanks so much! I appreciate the watch! 😊
Great info thank you. Am I just missing the link to your face mask?
Thanks for the watch! I’ll
have to check your see if I forgot to add it in. Here’s the link :) : www.bearwood.com/gvs-organic-vapor-mask-half.html
Thank you!
well i broke down and got a jet from home depot thinking it was a good saw and boy was i wrong,,,lol,,when you released the tension on top to thread the blade thru the wood for internal cuts,,the bottom bracket holding the blade just fell out,,,i never could get the bottom bracket to hold the blade in place as i was feeding it thru the hold in the wood,,,lol,,lession learned,,i guess i should have gotten the pegas to start with but i was scared that if something like this was wrong with the pegas it was mine,,,where i did return the jet to home depot,,,its kinda funny,,i have got 2 jet lathes and a 15 inch planner that is great,,,but i honestly would not give 100 dollars for the scroll saw,,,
Yea, a lot of tools you can go cheap with. I use a lot of wen (sander/nailer/planer)…But it is crazy the difference between a cheap/more expensive scroll saw. It’s worth paying for!
i agree but this saw was anything but cheap,,,it was a jet,,900 dollars@@WendellWoodworks
@@jeffoldham668 oh wow! I didn’t realize it was that expensive! What a bummer. Hope you get yourself a great one :)
Hi please give me model name or model i am also buy one like that machine
Hi. Here's a link. www.bearwood.com/pegas-scroll-saw-21-inch-usa.html?aff=WENDELL
🎶 'PromoSM'