I bought a case with bad air flow because it was the only case that met my requirements in my sub $50 case budget. Thanks to some power tools and a complete disregard for my case's resale value, it now has amazing airflow.
@@mohammedbest786 it's nothing special. I just took a drill with a bit that's bigger than the holes in the case and just drilled out the holes to make them wider. I didn't realize until after I got the front done that I was applying too much pressure and had warped the front so my fans rub and make a horrible noise by I have a loud sound bar and subwoofer combo. I plan on just taking an angle grinder with a cutting disc and just cutting out the front since it's warped I've just been lazy lol
As a gamer, wouldn't you always prefer a cabled internet connection? Isn't it faster and more stable? I'm just wondering why I should buy a motherboard with wifi.
@@pianissimo7121 Well that doesn't make sense if you'll never use it. I suppose most gamers are on cabled internet, so I don't understand this hype for wifi at all.
i watch a lot of these kinds of videos even though i feel i already have a solid understanding of the "do's & dont's," but it's always good to get someone else's perspective in case i'm missing something. i kept waiting to hear a suggestion that i didn't agree with, but everything here makes sense to me and is in line with what i often recommend to people who ask me to build them a system (which happens a lot, ha). first video from this channel i've seen (thanks algo!) and it won't be the last. earned a sub from me!
@@justmatt26554060ti 8gb is stupid, already 3060ti should have had 12gb… but 4060ti 16gb is a solid card if you have pci 4.0 (otherwise you lose performance wir 8 lanes) it just depends on tje price.
I DO NOT regret going Intel ARC A750. It gets me very high frame rates in everything I play ( Fortnite, Star Citizen, Elite Dangerous, Warthunder and many other titles )... I don't have ANY issues with it on any title I've played! It's half the price of the 4060 and often competes on a 1:1 FPS against it ( my son runs a 4060 beside me so I know this first hand!! )
Adding my brick to this, as someone who uses a 750 daily. (The one i got seems to be "castrated" but i bought it used so there might be a lot wrong with it). The performance is pretty good, maybe not the best in competetive games but it's more than enough for smooth 1080p 60fps on high/ultra settings in rpgs, indie games etc. But most important: for a year of owning, i got 1 bluescreen. And i'm not exacly sure if it's arc's fault either. No driver problemes ever. If you are curious, go for it. It's cheap but very well rounded. I build a pc with A770 twice, once with A580 and about 5 times now with A750. None of my customers had any problems yet, and i don't think they will. (and it's probably the most aesthetically pleasing gpu in it's price range, be it Limited Edition, Gunnir Photon, Sparkle Titan or Acer Predator)
@ankushchauhan7563 arc 750 is pretty damn good for that price range the only real issue it had was that most games were not optimized to for it so it does perform worse than what it could but they have been rolling out updates to improve that I saw some games running nearly double the fps that were shown on 8 months ago compared to few weeks ago
Just a but... in Brazil there is no " price drops" new stuff gets launched and the old ones take literally 1 or 2 years to drop the price. AND THE X3D VERSION IS 280 DOLARS MORE!!!!!
I think youre wrong about buying a 360mm AIO. Might be overkill but theres no difference in price really, I bought a scythe fuma 3 for $50, but just replaced it with a thermalright frozen prism 360 for $62 and now I can overclock my cpu safely for $12 more. No brainer imo and if the cooler last for years it will be futureproof.
I like to remind people that many motherboards still don’t support gen5 SSDs. So, check the motherboard specs before shopping. As always, look for deals. Prices on top tier SSDs often bounce up & down like crazy.
Gen3,Gen4 or Gen5 drives in most every way are no better in game loading than a quality old 2.5” SSD. There is only a few games that harness their speed. Main thing to avoid is the cheaper no dram versions as they drop way off in performance anytime moving game folders around. I finally got rid of my slowest Crucial P2 1tb about a week ago for $50. I had an extra SN750 1tb I cloned onto. I have 21 NVMe drives installed on all my builds and sadly their performance never gets used during load times. They all run like regular SATA SSD’s. Now when I move game folders from one to the other then that is fast and I regularly see 2000-4000mb read/write. Also fast when the game software like Steam has to check the freshly moved over game folder it reads at NVMe speeds. But loading a game they run at sata ssd speeds almost always.
theres maybe a couple of seconds of load difference whenever you load up games, i also went with a gen 3 drive, even the 2.5'' sata ssd's are still fast enough to boot up windows and load games off of
Sometimes the problem is your core clock rate (what people call speed) are using way more voltage than advertised, couple that with the amount of current the unit uses, that increases the wattage seen at the active junctions (transistor junctions). Try intelligently underclocking the cores while overclocking. Each CPU has certain sweet spots that allow you to go up quite high and still be stable while reducing the amount of power that is consumed and comes off as a waste product as heat. This can be done on GPU cards as well. Also, having a not so well regulated PSU can cause temperatures to spike on your motherboard chipset and components plugged into your PCIe slots, too. Not all PSUs are equal in that area.
About your step 4,i'ved been searching the internet, but i find that 16gb ram is currently the best budget friendly ddr4 ram. So, i'm currently ruling out any other ddr4 ram size, it's either 16gb ram or not, for me...
Thermalright: Here's a 18$-20$ CPU cooler backwards compatible for AM4/AM5 and intel CPU. Efficient on 105W (Can keep up to 170W, but recommand higher cooler) Also Thermalright: 33-37$ Same as before efficient on 170W (Can keep up to 250W, but higher cooler recommanded) Again Thermalright: 360mm AIO Efficient on 250W, can cool down 400W. Thermalright is really the XFX of CPU cooler.
From my understanding with Ryzen CPUs is X for work, X3D for gaming. Also it probably won't be until '25 when the price on the 9000 series chips will be worth buying.
So I am thinking of building a new personal desktop. I NOT INTRESTED in any games, I DON’T play games. The main use is going to Photoshop, photographic , some video editor and some 3D rendering (Sweethome 3D). Here are the parts that I am thinking of buying .. .. .. ASUS TUF Gaming Z790-Plus WiFi LGA 1700 Intel Core i7-13700K Crucial Pro RAM 32GB Kit (2x16GB) DDR5 5600MHz MSI Gaming GeForce RTX 3060 8GB GDRR6 Is this a good build ?? ??
ASRock B760 Pro RS WiFi ATX LGA1700 Motherboard I forgot to pin this but usually I use PCpartpicker and based on your region it will show you the lowest prices
Ryzen 7900 and 7950 CPUs might see a significant price drop when the Zen5 CPUs are released. But they might not. The advice to wait and see is sound. My plan is to build either a new AM5 video/audio production PC or a new primary gaming PC once we see where Zen4 prices go. Which one I build, and around which CPU, is a tough decision since I already have a 13700K (with a 280mm AIO) system that is very good for either use case. My sense is that the 7950X will become a price-to-performance bargain if the Ryzen 9 9xxx chips prove to be 15% or more faster. There's no reason for 99% of us to buy a Gen 5 NVMe drive. A storage drive that needs active cooling to function properly is just plain silly.
10:37 This is where the Noctua nh-d15 can be deceptive. I have an older 1st gen nh-d15 from 2016. Yes, it was expensive. But I have been moving it between computers for almost 10 years now. The only moving parts are the fans, which I've upgraded as the fan tech has improved. Assuming I don't bang the heatsink around around, it should still be usable when I die. I suspect that eventually I'll upgrade to something that the nh-d15 won't fit on, but that hasn't happened yet. When it does, I'll just turn one of my older computers into a home server or entertainment center. HOWEVER, I'm still running 12th gen Intel. From what I've heard, it would be idiotic to try and run 13th and 14th gen Intel processors on air cooling. (Also, you don't have to use old heatsinks inside your pc. I got one of those cheap hdmi to usb video coverters and it was overheating. So, I took an older Noctua heatsink and strapped the dongle to it. No more overheating problems.)
Kind of right on cas latency, if you really are worried look at how many ns it takes, there is usually ways to check and that will give you a for certain way to see if whats best.
For the motherboard, if you have the router in the same room, you dont need wifi, just do a little more for a cable, it is even more stable if you live in a country where wifi isnt good enough
No matter what country you are in, better or worse wifi, lan internet beats wifi, even 5g wifi. The only reason you'd want or need wifi on a desktop computer is if you're too far on the main Internet modem and router, that you'd need like 30-50m lan and/or dig lots of holes in your place... My son's bedroom is at 1st floor, my daughter's is at 2nd floor of the hous, while the modem and router is at first floor beside the main tv for jideji.i was thinking of getting 30-50m lan for her desktop computer that i built, since she's now 13 and wanted her own computer for gaming, but my daughter and her mother didn't like having that long lan, even well routed and managed, plus the 5g wifi of asrock z270 taichi is decent enough, since she's not really a hard gamer, but still play pc games, though, she's very whiny and noisy when having issues and troubles in her gaming...
recently chose and bought parts for my new PC and based on your video overall, I made really good choices just slight mistakes with a fishtank case and choosing a ram that is 38 CAS
Avoid DDR5 32GB high CAS latency? 6:18 There is a numbers like this "CL-46-46-46-90 DDR5", and for DDR4 there is "CL-18-22-22-42", what is that mean and which numbers we should care about?
GPU: avoid those GPUs, just watch the sales for a 8GB RX7600 which can easily be found for $200 for the same performance as the other mentioned GPUs at 50-100% less.
3:45 Although it wasn't I who picked it, (my dad did... maybe my brother too... Oh, and it was years ago.) but I currently have an R7 2700X. Does that mean that he (unwittingly) picked a bad one? (have been considering upgrading to an R5 5600X* down the line) *(FYI, I know that many are mentioning the "regular" 5600, but at least on Amazon, (more specifically, .se/Swedish Amazon) there isn't any for sale. But the X version does.)
I would like to add a casing... The Kolink Unity Peak is a beautiful piece of work, but only get it if you are handy and comfy with reassembling it, or if you get one assembled have it complete forever. Because chances are you'll never be able to expand your system without completely taking it apart first. That said, it's quite lovely to look at and it has many of the right ideas - just not an easy casing to work with spacewise.
Sorry but ill take a good quality air cooler over a aio, no chance of liquid leaks, no pump failures, and most aio are double the price of a decent air cooler
I will say that I have only ever had one leak in 10 years of PC building and 100s of coolers, and even then it was so small it only stained the edge of the tubing sleeve and didn't actually leak on to any of my components...
I don’t regret buying the 9950x, I needed it for my 3d work rn, and if the x3d one turns out to be amazing and way better, I can still buy it later, since don’t need to replace anything else
yeah i care about budget balance build, so i bought for 350- a7800x3d, 6000 cl30 2x16gb expo ram, b650 with good phases, yes i bought a 4060 for 270, but i intend to buy a 5080 when it comes out, ah also a SF1000L psu, inside a Lian Li A3, crammed in there i put a montech 360aio, which offers good value, KC3000 1Tb +2TB WD770, will get a 4k screen soon. I put in the Artic P12 Max 5 fans, because so cheap for lots of air.
i agree on everything except the generations of ssd's. The difference on paper between the gen 3 and 4 drives is double the amount, but in theory when loading up your games this is only a couple seconds of a difference. So if i can find a gen 3 thats a little cheaper, i wouldnt mind going with that one if its for game storage
On the topic of motherboards. I suggest going into pc part picker, adding your gpu, drives, a wifi adapter, and ethernet adapter to your build as well as a sound card if you think you would ever consider one, then choosing the cheapest wifi 6E equipped motherboard that is compatible with all your hardware. This will allow you to upgrade your build to utilize faster internet when it's made available to you. Of course you should removed either ethernet adapters or wifi adapters if you don't see yourself ever using one. If you're not familiar with internet speeds, they tend to improve even faster than processors at the moments. In just a few years your internet speed can double and you can end up unable to fully utilize a high bandwidth package (which are often heavily discounted to be one of the most affordable and functional packages for multiuser households).
Have 3 DDR5 kits, one for each machine. 2 are CL38, the 48gb well I can't see going down from that personally. If I get CL30 I should probably buy more ram period. I do spend more time obsessing about ram kits than I should.
@@neverdie8977 My 48gb kit is CL36 G.SKILL Ripjaws S5 Series 48GB 6400 but I get what you mean. TG Delta 32gb kits I have are CL38. Would try to shop CL30 but I think back then last year it was more expensive to get lower CL.
I'm new to P.C. been studying through you and other resources. Where can I go to build a P.C. that suits around my needs? I'll spend what I have to for reliability and years of upgrades, but I'm not really looking for flashy, just more for study, possibly video calling, and some gaming. My main goal for gaming is to be able to play the shooter games I like with knowing I have confidence in my setup, and I'm not lagging or something due to having outdated materials. Please point me to a website or video so i dont spend unnecessary money for my applications.
Might wanna check out PC Builder videos. They have a series called Boost My Build where they improve on user-submitted builds. You'll likely only need 1080p gaming focused on a good CPU and a decent 1080p GPU.
You really helped me so thanks about it. but i have to ask do you think that the corsair vengeance 6000mhz 36cl is good enough for the 7800x3d? (my main game is fortnite).
It is however good to remember that the cas latency does not directly tell anything about the actual latency as time it takes to recall an item from memory. It only tells how many clock cycles it takes. For example the latency of dd4 3200 cl16 ha sthe same latency in time wise as ddr5 6400 cl32. (As the ccyles go double as fast). Bandwith is a lot greater of cource in ddr5. (Double that).
I spend 2 weeks researching PC builds and parts, I haven't learned so much in a while. lol I feel like I learned a new language, I understand what people are talking about when listening to PC recommendations. lol
Thank you for your videos. One of your other videos helped me finalize a build that I'd be purchasing to upgrade from a 7 year old pc. Subscribed and liked! P.S. Any chance you could do a critique of the build? You're likely a busy man so probably not, but I figured I'd ask!
Sorry but telling people to wait for a cpu that is worse and costs more is ridiculous. There are really good air coolers out there, would never put water in a system that cost me thousands.
I just bought a 7600 and people always tell me that it was a bad buy and i shouldve gotten a 6700xt. I mean the rx7600 is 290$ while the 6700xt is 620$ this is based on my country. While i see used 6700xt at around 200-250usd but am i stupid for not risking it?
Actually looking to build a gaming pc in an old 90´s beige tower that doesn´t have any exhaust fans and only a 80mm intake fan on the lower front. (power supply mounted above the mainboard) Wondering IF it would be possible to use a 5800x3d in that without horrible thermal limiting it. The options i consider right now are a 5800x3d with a big cooler from be quite (will add 2 40mm fans on the rear to create some exhaust), or a 5600x(3d?). With a rtx 4070. It surely would work either way just not to sure about the thermals... Might probably better to go with a lower power ryzen 5 non 3d and go from there. But... i may even end up with a ryzen 9 5950x cause reasons. Sadly water cooling isn´t really a solution in this case, just want a proper 90s sleeper build. I may even consider getting a intel arc a770 cause... reasons.
Hey I have an Msi trident 3 with a GeForce GTX 1660 SUPER and 16G RAM AND i7-10700 and I have searched and searched for good part and videos that can help me and I have found nothing is there anything you can tell me maybe make a video or just answer me with a good gpu compatible with a cpu plz🙏 and thank you
Dude, need help…is 4070 12GB better or 7800XT for 1440p gaming? I don’t care about DLSS or FSR…I just need better Fps! Im upgrading from 1650ti along with 5 5600 to 7 7800X3D
7800xt has better pure rasterization performance. Since you said yourself you don't care bout DLSS anyways, go for the 7800xt. If the 7900gre doesn't cost much more go for that one instead
Im still running my overclocked msi 1080ti gaming x with 11gb vram. Still play the newest games on max settings. And got a i5 14600kf overclocked to 5.7ghz and is running 50-70 degrees tempertures. But im using a watercooler. Also running the ddr5 dominator 7200mhz at 34 latency. 1 is runninh at 7400mhz
Gen 3 M.2 is fine. Games honestly don't need gen 4 read/write speeds that is more for workstations and they get super hot if you don't have enough airflow or your Mobo do not give you good sinks for them. You better off save that extra 30 dollars get a gen 3 M.2 and put that extra money into something else like a better motherboard or better cooling or fans.
i need some help i have a new PC that I just built and whenever I play ghost recon wildlands it cuts out after about 15-30minutes, I have a 12700kf, 16gb ram, 6800 what is the problem
@aydinlutmergp4885 I half fixed it, i think that the absolute root issue is it being an intel chip having instability issues, but i ended up fixing it through changing from auto to normal/fixed for vcore in bios
Hi, what do you think about the combo CPU Ryzen 7 7800X3D and GPU RX7900 GRE? Also, do you think prices are good now or is it worth it to wait until Black Friday?
I would recommend nvidia 4070 ti and above with intel i7 14700kf. Im not a fan of the ryzen 7 78003xd as Its useless for everything except gaming. It only performs better than the I7 with cache sensitive games.
I don’t really see any price conscious upgrade for me worth doing other than going to lga 1700 as of right now because it’s the only way I can reuse my 32gb of ddr4 and my CPU cooler. So I’m saving a ton of money on just those things not having to be purchased again. Sure, I’ll have to switch over at some point in the future again, but that tends to be the case anyway when talking about doing cpu upgrades. Most people aren’t buying a new cpu every year or two years. I’ve had my current i7 7700k for 5 years. It has served me well, it’s at the end of its life to me, so now I have to switch motherboard. But chips like the i5 13600k came out literally a year ago, they’re still brand new for most people, and they’re very cheap to find on eBay, often going sub $200. It’s really a no brainer to me. Like yeah I could wait and buy a new chip with a socket that’ll be in service for years to come, but firstly I don’t know if that socket will ACTUALLY be in service for years to come and by then it wouldn’t be worth it to upgrade to that last generation of cpus on that socket if we used the same logic. And I’d be spending double or triple the amount as well. So yeah I’m gonna get myself a 13600k
I agree with everything but the last point on wifi. Pretty sure straight ethernet from your router gives you the best possible internet connection. Obviously it depends on your specific house network setup. If you can't run a ethernet cable due to whatever reason then yes use a wifi dongle similarly shown in the video.
@@G0A7 I know. What I said was ethernet gives you the best possible internet connection where as wi-fi can have interference from the router to your computer.
@@G0A7 you don't just get access to the internet magically with only a wifi dongle. Do your research. Your ISP gives you internet to your router which then sends the wireless signal to your wifi dongle. You can choose to use wifi or an ethernet cable for your internet. Both will work but ethernet is a little bit faster & a more stable connection.
@@xtremezone987 yes but ethernet and wifi are different things, if hes talking about the wifi why are you talking about ethernet? Sure ethernet should be better in most cases but again, hes talking about wifi
mostly agree but the gen4 nvme is pointless, nvme pci3 is already super fast and in most cases you really wont see a difference, go for a higher storage nvme pcie3 for the same price
It'll work but the CL is too high try getting one with a cl 32 or 30 espically for amd but what i did i got an intel xmp kit that was on sale 6000 MT cl 30 and it worked fine
non x3d chips can be better than x3d chips (excluding the 7800x3d) because they have 2 CCDs and cpu struggles to pick one plus only 8 cores benefit from the x3d thing and you wont need it unless gaming
Guys I am going to build a 5600 and a rx 6650xt or 7600 build I don’t know what to choose and now that I am watching this I feel like my build would be outdated it’s like 710 euro in Greece .😢
@@chrissyboy7047 i got 5600x and 6750 xt and its very good combo, the only downside if u wanna stream u lack nvenc and u lack av1, if i were you i would skip 7600 and wait for a discount of smthing like 7700 xt
hello hope u r good i have a 7800 xt and a corsair h150 cooler I'm looking forward to buy a cool case cz my case is getting heat alot i don't want a fish tank one, cz u said its not that great what do u recommend for me sir.(i dont care about the price alot but the lower the better if it does the work)
There are a lot of air flow cases, maybe a Montech Air 100. My 7800XT is in an Antec NX410 White case. There are a lot of non-fishtank airflow cases, as long as you can fit the GPU and the front intake is mesh I think the airflow has a chance. Case I have has 2 x 140 intake and 120 exhaust. Would price 60-100 about what you might spend on a decent case.
Idk only the people who have never used one says its bad. Maybe its just my config but i was playing sons of the forest with my friend who has a 4070. I have a 4060 ti, both of us got about 120 fps at 1080p ultra settings so. Both get about the same performance with the 4060 ti being about 150 bucks less
If you’re thinking of getting a 4069 legit just get ANY mid or high end of the previous generation. Especially the AMD gpus have really reasonable prices, you can also get 1440p cards for the same price as a 4060. It’s just a bad card, low vram, high price.
4060 and 4060Ti have 16 gigs of VRAM available as well, not to mention that they are able to use DLSS3 and Framegeneration, which is quality-wise still better than AMD's solutions. Buying an older 3070 for example cuts down on those features, pushes you to use suboptimal 3rd party solutions and are also more powerhungry aka inefficient. Not to mention, that a 4060Ti is pretty much on par with the 3070 in rasterizing, but exceeds in the Raytracing category. Gen4 NVMe's: Dont recommend the P3 Plus, as it has terrible TBW rates and just exceeds Gen 3 Performance by a wee bit aka is a Gen4 slow poke that could petentially break quickly. If you have just Gen3 available on your board, the other 2 are good options, but if you have Gen4 and want to have a drive that gets near the limit of Gen4, but is still affordable, i'd suggest a Lexar NM790 for example, its fast, affordable has very high TBW rates and also doesnt get very hot.
The thing is if you're going to pay more for the card you may as well just go and get the 4070 or better yet one of the AMD cards that have way more vram and more performance for the same cost. By the time you'd actually need all the extra vram you've hit the limits of the 4060.
Gen 3 nvme ssds are fast enough that you really won't know the difference between it and a gen 4 ssd. Not unless your moving massive files, in which case your going to need more storage than a 1TB drive.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
I bought a case with bad air flow because it was the only case that met my requirements in my sub $50 case budget. Thanks to some power tools and a complete disregard for my case's resale value, it now has amazing airflow.
😂😂 I’m guessing you performed surgery
@@mohammedbest786 it's nothing special. I just took a drill with a bit that's bigger than the holes in the case and just drilled out the holes to make them wider. I didn't realize until after I got the front done that I was applying too much pressure and had warped the front so my fans rub and make a horrible noise by I have a loud sound bar and subwoofer combo. I plan on just taking an angle grinder with a cutting disc and just cutting out the front since it's warped I've just been lazy lol
@@Stonerman135 just make a damn video!!!
Which case was it
As a gamer, wouldn't you always prefer a cabled internet connection? Isn't it faster and more stable? I'm just wondering why I should buy a motherboard with wifi.
Yes, cable is the way.
Cable is indeed faster and more stable, but it's not always possible to link the computer via an ethernet cable.
Wired is definitely the way to go. A lot of mid-range or better mobos tend to include wifi though, which can be a nice bonus.
Having wifi is better then not having it
@@pianissimo7121 Well that doesn't make sense if you'll never use it. I suppose most gamers are on cabled internet, so I don't understand this hype for wifi at all.
i watch a lot of these kinds of videos even though i feel i already have a solid understanding of the "do's & dont's," but it's always good to get someone else's perspective in case i'm missing something. i kept waiting to hear a suggestion that i didn't agree with, but everything here makes sense to me and is in line with what i often recommend to people who ask me to build them a system (which happens a lot, ha). first video from this channel i've seen (thanks algo!) and it won't be the last. earned a sub from me!
Only thing I didn't agree with is I think he was a bit too harsh on the 7600 and 4060. I agree that the 4060ti is bad tho
Thanks for such a nice comment dude! Welcome to the channel, I hope I can keep serving content you'll enjoy :)
@@justmatt26554060ti 8gb is stupid, already 3060ti should have had 12gb… but 4060ti 16gb is a solid card if you have pci 4.0 (otherwise you lose performance wir 8 lanes) it just depends on tje price.
I DO NOT regret going Intel ARC A750. It gets me very high frame rates in everything I play ( Fortnite, Star Citizen, Elite Dangerous, Warthunder and many other titles )... I don't have ANY issues with it on any title I've played! It's half the price of the 4060 and often competes on a 1:1 FPS against it ( my son runs a 4060 beside me so I know this first hand!! )
im wondering if its good for vr like with a quest 2.
@@andrievbastichy8551 it cant run vr get atleast a 3060
Adding my brick to this, as someone who uses a 750 daily. (The one i got seems to be "castrated" but i bought it used so there might be a lot wrong with it).
The performance is pretty good, maybe not the best in competetive games but it's more than enough for smooth 1080p 60fps on high/ultra settings in rpgs, indie games etc.
But most important: for a year of owning, i got 1 bluescreen. And i'm not exacly sure if it's arc's fault either. No driver problemes ever.
If you are curious, go for it. It's cheap but very well rounded.
I build a pc with A770 twice, once with A580 and about 5 times now with A750. None of my customers had any problems yet, and i don't think they will.
(and it's probably the most aesthetically pleasing gpu in it's price range, be it Limited Edition, Gunnir Photon, Sparkle Titan or Acer Predator)
Thank you for the relieving comment, I ordered an arc 750 a few days ago, for my first budget PC, and as it is on the way, I panicked.
@ankushchauhan7563 arc 750 is pretty damn good for that price range the only real issue it had was that most games were not optimized to for it so it does perform worse than what it could but they have been rolling out updates to improve that I saw some games running nearly double the fps that were shown on 8 months ago compared to few weeks ago
Well, I have the Intel generation 14 and I'm looking to change to an AMD. I feel like it degraded very quickly.
nahhh don't tell me that buddy, poor you when you get your AMD try to use windows10, mine is from BNH Software, I think you can take a look there
I know, I didn't expect it to be so bad, but thanks for the info.
Just a but... in Brazil there is no " price drops" new stuff gets launched and the old ones take literally 1 or 2 years to drop the price. AND THE X3D VERSION IS 280 DOLARS MORE!!!!!
I think youre wrong about buying a 360mm AIO. Might be overkill but theres no difference in price really, I bought a scythe fuma 3 for $50, but just replaced it with a thermalright frozen prism 360 for $62 and now I can overclock my cpu safely for $12 more. No brainer imo and if the cooler last for years it will be futureproof.
Never heard arctic freezer 36
I like to remind people that many motherboards still don’t support gen5 SSDs. So, check the motherboard specs before shopping. As always, look for deals. Prices on top tier SSDs often bounce up & down like crazy.
Gen 3 SSD isn't bad for storing games if u can get it cheap.
I have a crucial P2 SSD(Gen 3) and a crucial T500(Gen 4) as my main drive
Gen3,Gen4 or Gen5 drives in most every way are no better in game loading than a quality old 2.5” SSD. There is only a few games that harness their speed.
Main thing to avoid is the cheaper no dram versions as they drop way off in performance anytime moving game folders around. I finally got rid of my slowest Crucial P2 1tb about a week ago for $50. I had an extra SN750 1tb I cloned onto.
I have 21 NVMe drives installed on all my builds and sadly their performance never gets used during load times. They all run like regular SATA SSD’s. Now when I move game folders from one to the other then that is fast and I regularly see 2000-4000mb read/write. Also fast when the game software like Steam has to check the freshly moved over game folder it reads at NVMe speeds.
But loading a game they run at sata ssd speeds almost always.
Problem is 2TB gen 3 SSD and 2TB gen 4 NVME here has only $20 price difference lol so it's no brainer to get gen 4
theres maybe a couple of seconds of load difference whenever you load up games, i also went with a gen 3 drive, even the 2.5'' sata ssd's are still fast enough to boot up windows and load games off of
Sometimes the problem is your core clock rate (what people call speed) are using way more voltage than advertised, couple that with the amount of current the unit uses, that increases the wattage seen at the active junctions (transistor junctions). Try intelligently underclocking the cores while overclocking. Each CPU has certain sweet spots that allow you to go up quite high and still be stable while reducing the amount of power that is consumed and comes off as a waste product as heat.
This can be done on GPU cards as well.
Also, having a not so well regulated PSU can cause temperatures to spike on your motherboard chipset and components plugged into your PCIe slots, too. Not all PSUs are equal in that area.
Step 1: cheap or used Ryzen 5 3600 or better
Step 2: cheap b450/550 mobo
Step 3: cheapest GPU with 12~16GB or AliExpress RX 580 2048 until prices gets better?
Step 4: 4x8GB RAM of DDR4-3200+ kit
About your step 4,i'ved been searching the internet, but i find that 16gb ram is currently the best budget friendly ddr4 ram. So, i'm currently ruling out any other ddr4 ram size, it's either 16gb ram or not, for me...
@@teslagod7221 you can buy 2x8 now and 2x8 again later, then you get dual-rank performance.
16*2 is superior to 4*8
@@iantune depends on the motherboard and if it is 8gbit chips or 16gbit chips on the RAM stick
waiting for all the 4060 ti is good! comments
It’s a good GPU at a bad price 😅
@@GeekaWhat bad pricing is what makes a good product bad.
@@GeekaWhat Was buying an RTX 4060 Ti 16GB for $377 a good purchase?
@@Angel-em6oddoesn't have enough power for 16GB. You can buy a 6750XT for 300 and it is a better overall
Here!
RX 7600 is super underrated. It can run most AAA titles and shooters at 165 fps + at 1440p and heck, even 3440px1440p
Thermalright: Here's a 18$-20$ CPU cooler backwards compatible for AM4/AM5 and intel CPU. Efficient on 105W (Can keep up to 170W, but recommand higher cooler)
Also Thermalright: 33-37$ Same as before efficient on 170W (Can keep up to 250W, but higher cooler recommanded)
Again Thermalright: 360mm AIO Efficient on 250W, can cool down 400W.
Thermalright is really the XFX of CPU cooler.
From my understanding with Ryzen CPUs is X for work, X3D for gaming. Also it probably won't be until '25 when the price on the 9000 series chips will be worth buying.
Amd already said the 9k chips won't be better than 7800X3D for gaming
So I am thinking of building a new personal desktop. I NOT INTRESTED in any games, I DON’T play games. The main use is going to Photoshop, photographic , some video editor and some 3D rendering (Sweethome 3D). Here are the parts that I am thinking of buying .. .. ..
ASUS TUF Gaming Z790-Plus WiFi LGA 1700
Intel Core i7-13700K
Crucial Pro RAM 32GB Kit (2x16GB) DDR5 5600MHz
MSI Gaming GeForce RTX 3060 8GB GDRR6
Is this a good build ?? ??
I think you can get away with a lower priced motherboard imo
ASRock B760 Pro RS WiFi ATX LGA1700 Motherboard
I forgot to pin this but usually I use PCpartpicker and based on your region it will show you the lowest prices
Get better GPU
Ryzen 7900 and 7950 CPUs might see a significant price drop when the Zen5 CPUs are released. But they might not. The advice to wait and see is sound. My plan is to build either a new AM5 video/audio production PC or a new primary gaming PC once we see where Zen4 prices go. Which one I build, and around which CPU, is a tough decision since I already have a 13700K (with a 280mm AIO) system that is very good for either use case. My sense is that the 7950X will become a price-to-performance bargain if the Ryzen 9 9xxx chips prove to be 15% or more faster.
There's no reason for 99% of us to buy a Gen 5 NVMe drive. A storage drive that needs active cooling to function properly is just plain silly.
Just copped a 7900x3d last week on sale for $329 (same price as a 7800x3d), which is great for me as I will use my new pc for more than just gaming.
I‘ve gone from an corsair 4000X air to an NZXT H9 flow and my pc is way colder now
10:37 This is where the Noctua nh-d15 can be deceptive.
I have an older 1st gen nh-d15 from 2016. Yes, it was expensive. But I have been moving it between computers for almost 10 years now. The only moving parts are the fans, which I've upgraded as the fan tech has improved. Assuming I don't bang the heatsink around around, it should still be usable when I die.
I suspect that eventually I'll upgrade to something that the nh-d15 won't fit on, but that hasn't happened yet. When it does, I'll just turn one of my older computers into a home server or entertainment center.
HOWEVER, I'm still running 12th gen Intel. From what I've heard, it would be idiotic to try and run 13th and 14th gen Intel processors on air cooling.
(Also, you don't have to use old heatsinks inside your pc. I got one of those cheap hdmi to usb video coverters and it was overheating. So, I took an older Noctua heatsink and strapped the dongle to it. No more overheating problems.)
Kind of right on cas latency, if you really are worried look at how many ns it takes, there is usually ways to check and that will give you a for certain way to see if whats best.
For the motherboard, if you have the router in the same room, you dont need wifi, just do a little more for a cable, it is even more stable if you live in a country where wifi isnt good enough
No matter what country you are in, better or worse wifi, lan internet beats wifi, even 5g wifi. The only reason you'd want or need wifi on a desktop computer is if you're too far on the main Internet modem and router, that you'd need like 30-50m lan and/or dig lots of holes in your place...
My son's bedroom is at 1st floor, my daughter's is at 2nd floor of the hous, while the modem and router is at first floor beside the main tv for jideji.i was thinking of getting 30-50m lan for her desktop computer that i built, since she's now 13 and wanted her own computer for gaming, but my daughter and her mother didn't like having that long lan, even well routed and managed, plus the 5g wifi of asrock z270 taichi is decent enough, since she's not really a hard gamer, but still play pc games, though, she's very whiny and noisy when having issues and troubles in her gaming...
recently chose and bought parts for my new PC and based on your video
overall, I made really good choices
just slight mistakes with a fishtank case and choosing a ram that is 38 CAS
Avoid DDR5 32GB high CAS latency? 6:18 There is a numbers like this "CL-46-46-46-90 DDR5", and for DDR4 there is "CL-18-22-22-42", what is that mean and which numbers we should care about?
For ddr5 the sweetspot is ddr5 6000mhz cl30 to cl36, for ddr4 3200/3600 mhz cl16
@@Crusher91 Oh very nice, so random brand is okay right? like kingbank, apacer, or PNY.. similar brand not really popular?
As long as It has good warranty and the advertised speeds its ok, but Gskill, Corsair, Kingston are sure bets @@bsoda69
Sorry James I love my 4060 got it a good price ...works very well at 1080p it's very very power efficient ..and very quiet..
3060 ti better for lower price
@@Flaim13060ti is a very good card, just missing 4gb of vram.
Wish I had bought the 6700xt 12gb instead
@@Flaim1 idk where your looking but 3060 ti 8 GB is more money than a 16 GB 4060 ti...
@@gametag8257 Idk where your looking or what kinda crack your on but 290$ is less than 350$ last time I checked 💀
@@Flaim1would you recommend the 3060 ti over a 4060 ?
GPU: avoid those GPUs, just watch the sales for a 8GB RX7600 which can easily be found for $200 for the same performance as the other mentioned GPUs at 50-100% less.
3:37 3:37 3:37 3:37 3:37 3:37 3:37 3:37 3:37 3:37 3:37 3:37 3:37 3:37 3:37
3:37 3:37 3:37 3:37 3:37 3:37 3:37 3:37 3:37 3:37 3:37 3:37 3:37 3:37 3:37 3:37 3:37 3:37 3:37 3:37 3:37 3:37 3:37 3:37 3:37
3:45 Although it wasn't I who picked it, (my dad did... maybe my brother too... Oh, and it was years ago.) but I currently have an R7 2700X. Does that mean that he (unwittingly) picked a bad one?
(have been considering upgrading to an R5 5600X* down the line)
*(FYI, I know that many are mentioning the "regular" 5600, but at least on Amazon, (more specifically, .se/Swedish Amazon) there isn't any for sale. But the X version does.)
I would like to add a casing... The Kolink Unity Peak is a beautiful piece of work, but only get it if you are handy and comfy with reassembling it, or if you get one assembled have it complete forever.
Because chances are you'll never be able to expand your system without completely taking it apart first.
That said, it's quite lovely to look at and it has many of the right ideas - just not an easy casing to work with spacewise.
What are the benefit of inbuilt wifi or wifi in general compared just plugging the Ethernet in the PC?
Sorry but ill take a good quality air cooler over a aio, no chance of liquid leaks, no pump failures, and most aio are double the price of a decent air cooler
I will say that I have only ever had one leak in 10 years of PC building and 100s of coolers, and even then it was so small it only stained the edge of the tubing sleeve and didn't actually leak on to any of my components...
I don’t regret buying the 9950x, I needed it for my 3d work rn, and if the x3d one turns out to be amazing and way better, I can still buy it later, since don’t need to replace anything else
for 1080p its really hard to not choose the 6750XT for just gaming
yeah i care about budget balance build,
so i bought for 350- a7800x3d, 6000 cl30 2x16gb expo ram, b650 with good phases, yes i bought a 4060 for 270, but i intend to buy a 5080 when it comes out, ah also a SF1000L psu, inside a Lian Li A3,
crammed in there i put a montech 360aio, which offers good value, KC3000 1Tb +2TB WD770, will get a 4k screen soon. I put in the Artic P12 Max 5 fans, because so cheap for lots of air.
i agree on everything except the generations of ssd's. The difference on paper between the gen 3 and 4 drives is double the amount, but in theory when loading up your games this is only a couple seconds of a difference. So if i can find a gen 3 thats a little cheaper, i wouldnt mind going with that one if its for game storage
On the topic of motherboards. I suggest going into pc part picker, adding your gpu, drives, a wifi adapter, and ethernet adapter to your build as well as a sound card if you think you would ever consider one, then choosing the cheapest wifi 6E equipped motherboard that is compatible with all your hardware. This will allow you to upgrade your build to utilize faster internet when it's made available to you. Of course you should removed either ethernet adapters or wifi adapters if you don't see yourself ever using one. If you're not familiar with internet speeds, they tend to improve even faster than processors at the moments. In just a few years your internet speed can double and you can end up unable to fully utilize a high bandwidth package (which are often heavily discounted to be one of the most affordable and functional packages for multiuser households).
Do you need the extra cpu powercable what most morherboards have like Msi. It has 2 8pin connectors for cpu power
Only if you plan on overclocking
One will work perfectly fine but if your gonna over clock your cpu plug
Both in.
The AIO thing can be somebody who wants to upgrade to something that will dip more power thus producing more heat.
I cheap out on the case now my PC is having overheating issue on demanding games 😢
So either I buy a new case or additional intake and exhaust fans
Depending on the case you could invest in come decent fans and move them over when you eventually swap cases
More fans 😂
yo how much was ur case
@@coreyaiou8 only USD 45. I reseated my CPU cooler and added 3 more fans and that solve my issue.
Got a tower fan for a R9 5900x and it's runs around 58-62 temps which is quite good for air cooling!
Ryzen 5 7600X + RX 6750 XT:
That's a good 1440p combo.
Almost my combo, I wasn't able to find the 6750xt, so I got the 6700xt
i hate his green lol
That's my build
Have 3 DDR5 kits, one for each machine. 2 are CL38, the 48gb well I can't see going down from that personally. If I get CL30 I should probably buy more ram period. I do spend more time obsessing about ram kits than I should.
same thing man just got a 48 g ddr5 6000mhz with CL38 and I was so obsessed about the CL it almost stop me from buying it at all
@@neverdie8977 My 48gb kit is CL36 G.SKILL Ripjaws S5 Series 48GB 6400 but I get what you mean. TG Delta 32gb kits I have are CL38. Would try to shop CL30 but I think back then last year it was more expensive to get lower CL.
6:04 It's like my brain without morning coffee 😂
Im waiting for the new 50 series to upgrade my RTX 3060Ti. The problem will be the GPU and CPU combo to have the best performance. Need help
I'm new to P.C. been studying through you and other resources. Where can I go to build a P.C. that suits around my needs? I'll spend what I have to for reliability and years of upgrades, but I'm not really looking for flashy, just more for study, possibly video calling, and some gaming. My main goal for gaming is to be able to play the shooter games I like with knowing I have confidence in my setup, and I'm not lagging or something due to having outdated materials. Please point me to a website or video so i dont spend unnecessary money for my applications.
pc part picker
Maybe wait for 15th gen Intel then get an i5 with a second hand 3060
Might wanna check out PC Builder videos. They have a series called Boost My Build where they improve on user-submitted builds. You'll likely only need 1080p gaming focused on a good CPU and a decent 1080p GPU.
I kinda want to make a Sonic themed PC but what are your thoughts on ASRock B760M PG SONIC WiFi LGA 1700 DDR5 Micro ATX Motherboard?
Solid board for a low-mid range 12th gen cpu,
Im looking to get a R5 7600 and RX 6700XT cause i feel like its worth going AM5, is 6000mhz cl30 DDR5 gonna be good?
Yeah, that's the sweet spot for RAM
@@dainiusvysniauskas2049 got the Tforce 2x16 6000 CL30 kit 👌
Team group is so good i just used them in my pc build.
In Serbia it's about 100$ difference between RX 6750 xt and RTX 4060 ti 16GB. Is it worth to buy 4060 ti 16gb for that extra100$?
No its not, the 6750 xt outperforms it
Not at all, buy the RX 6750 xt, even if they were at the same price the RX 6750 xt would still be better because it's outperforming it
The 9700x just got an update to 5.7ghz which out performs the 7800xD, So you’re completely wrong buddy.
7800x3d is still better in game
thx a lot, I was watching some of your other vids because im trying to build a pc!
Amd already said the 9000 chips won't be better than 7800X3D for gaming but its always better to wait since it will be more polished than 7000 series
What about if they make an X3D for the 9000 chips? Do you think itd be better than the 7800X3D?
@@ce3dubbzz yea and ofc they will but will launch later than the 1st lineup
You really helped me so thanks about it. but i have to ask do you think that the corsair vengeance 6000mhz 36cl is good enough for the 7800x3d? (my main game is fortnite).
get cl30
You should go with 32 or 30 cas latency
It is however good to remember that the cas latency does not directly tell anything about the actual latency as time it takes to recall an item from memory. It only tells how many clock cycles it takes. For example the latency of dd4 3200 cl16 ha sthe same latency in time wise as ddr5 6400 cl32. (As the ccyles go double as fast). Bandwith is a lot greater of cource in ddr5. (Double that).
Is the vetnus 2x black RTX 4060 still good regardless of the money value
I spend 2 weeks researching PC builds and parts, I haven't learned so much in a while. lol
I feel like I learned a new language, I understand what people are talking about when listening to PC recommendations. lol
Thank you for your videos. One of your other videos helped me finalize a build that I'd be purchasing to upgrade from a 7 year old pc. Subscribed and liked!
P.S. Any chance you could do a critique of the build? You're likely a busy man so probably not, but I figured I'd ask!
Sorry but telling people to wait for a cpu that is worse and costs more is ridiculous. There are really good air coolers out there, would never put water in a system that cost me thousands.
does a fishtank airflow really matter if you have 9 fans
11 ony me end
12:46 Why did I feel pain?....
Thanks for the advice. I'm planning to upgrade my 10-year-old rig
Can you dona build for Ryzen 7 7800 with a budget of $2k sgd?
Anyone ever have an Asus bored 4 * 4 bottom slot not work? I haven't tried the second GPU slot either but I am not getting it to detect any card.
I just bought a 7600 and people always tell me that it was a bad buy and i shouldve gotten a 6700xt. I mean the rx7600 is 290$ while the 6700xt is 620$ this is based on my country. While i see used 6700xt at around 200-250usd but am i stupid for not risking it?
Just be happy with your decision
You are the best builder Zach💛
You’ve got a new subscriber! Thanks for the info 😊
Actually looking to build a gaming pc in an old 90´s beige tower that doesn´t have any exhaust fans and only a 80mm intake fan on the lower front. (power supply mounted above the mainboard)
Wondering IF it would be possible to use a 5800x3d in that without horrible thermal limiting it.
The options i consider right now are a 5800x3d with a big cooler from be quite (will add 2 40mm fans on the rear to create some exhaust), or a 5600x(3d?).
With a rtx 4070. It surely would work either way just not to sure about the thermals... Might probably better to go with a lower power ryzen 5 non 3d and go from there.
But... i may even end up with a ryzen 9 5950x cause reasons. Sadly water cooling isn´t really a solution in this case, just want a proper 90s sleeper build.
I may even consider getting a intel arc a770 cause... reasons.
I already bought ryzen 7 7700 non x with my rog strix 4080super. Goodchoice guys? Just for play 2k aaa games
I'm planning to go for ryzen 5 7600x for my build. Is there any recommendation for the best low-midrange GPU for gaming and video editing?
7700xt, I got the 7800xt
@@warren3900 im planning to get the 7800xt aswell, how has it been for you?
Hey I have an Msi trident 3 with a GeForce GTX 1660 SUPER and 16G RAM AND i7-10700 and I have searched and searched for good part and videos that can help me and I have found nothing is there anything you can tell me maybe make a video or just answer me with a good gpu compatible with a cpu plz🙏 and thank you
Dude, need help…is 4070 12GB better or 7800XT for 1440p gaming? I don’t care about DLSS or FSR…I just need better Fps!
Im upgrading from 1650ti along with 5 5600 to 7 7800X3D
no 7800xt is faster for straight up peformance
7800xt has better pure rasterization performance. Since you said yourself you don't care bout DLSS anyways, go for the 7800xt. If the 7900gre doesn't cost much more go for that one instead
7800 xt is better
Get a 4070 super for like $40 more as it outperforms the 7800xt and is more well rounded as it’s an nvidia card
Or you can go for a 7800 XTX 24GB
Thanks bud!
Damn bro nice profile pic💀
@ why the skull emoji? Im not dead buddy
@@omccc oh i know
Im still running my overclocked msi 1080ti gaming x with 11gb vram. Still play the newest games on max settings. And got a i5 14600kf overclocked to 5.7ghz and is running 50-70 degrees tempertures. But im using a watercooler.
Also running the ddr5 dominator 7200mhz at 34 latency. 1 is runninh at 7400mhz
😂 1080ti is a beast but saying you're playing the newest games in max settings is a bit too much lol
The problem with the 7600 is it’s priced at the 6700XT without exclusive features that set it apart from RX 6000 series
Gen 3 M.2 is fine. Games honestly don't need gen 4 read/write speeds that is more for workstations and they get super hot if you don't have enough airflow or your Mobo do not give you good sinks for them. You better off save that extra 30 dollars get a gen 3 M.2 and put that extra money into something else like a better motherboard or better cooling or fans.
i need some help i have a new PC that I just built and whenever I play ghost recon wildlands it cuts out after about 15-30minutes, I have a 12700kf, 16gb ram, 6800 what is the problem
Maybe the cpu n gpu temp.
@wandalast2763 I checked it and it'd pretty normal
Power supply maybe? Doesn't seem likely but that's weird
@aydinlutmergp4885 I half fixed it, i think that the absolute root issue is it being an intel chip having instability issues, but i ended up fixing it through changing from auto to normal/fixed for vcore in bios
Would a RX 7700 xt paired with AMD Ryzen 5 7600x be a decent for 1080p gaming?
No, it would be STELLAR for 1080p and decent 1440p in most cases too.
It will be excellent, you can run game on 1440p with this build
Is there a 5600mhz ram at or under cl30? Is it capacity dependent?
Hi, what do you think about the combo CPU Ryzen 7 7800X3D and GPU RX7900 GRE? Also, do you think prices are good now or is it worth it to wait until Black Friday?
I would recommend nvidia 4070 ti and above with intel i7 14700kf. Im not a fan of the ryzen 7 78003xd as Its useless for everything except gaming. It only performs better than the I7 with cache sensitive games.
Thats damn near a perfect build. I got a 5700x3d and 7900xt and I'm really happy with it you'll love the 7800x3d with ddr5
@@prussell890there is no way you're recommending a 14th gen intel cpu before the microscope updates even come out
I don’t really see any price conscious upgrade for me worth doing other than going to lga 1700 as of right now because it’s the only way I can reuse my 32gb of ddr4 and my CPU cooler. So I’m saving a ton of money on just those things not having to be purchased again. Sure, I’ll have to switch over at some point in the future again, but that tends to be the case anyway when talking about doing cpu upgrades. Most people aren’t buying a new cpu every year or two years. I’ve had my current i7 7700k for 5 years. It has served me well, it’s at the end of its life to me, so now I have to switch motherboard. But chips like the i5 13600k came out literally a year ago, they’re still brand new for most people, and they’re very cheap to find on eBay, often going sub $200. It’s really a no brainer to me. Like yeah I could wait and buy a new chip with a socket that’ll be in service for years to come, but firstly I don’t know if that socket will ACTUALLY be in service for years to come and by then it wouldn’t be worth it to upgrade to that last generation of cpus on that socket if we used the same logic. And I’d be spending double or triple the amount as well. So yeah I’m gonna get myself a 13600k
I agree with everything but the last point on wifi. Pretty sure straight ethernet from your router gives you the best possible internet connection. Obviously it depends on your specific house network setup. If you can't run a ethernet cable due to whatever reason then yes use a wifi dongle similarly shown in the video.
Straight ethernet is not wifi
@@G0A7 I know. What I said was ethernet gives you the best possible internet connection where as wi-fi can have interference from the router to your computer.
@@xtremezone987 but hes talking about wifi not about internet
@@G0A7 you don't just get access to the internet magically with only a wifi dongle. Do your research. Your ISP gives you internet to your router which then sends the wireless signal to your wifi dongle. You can choose to use wifi or an ethernet cable for your internet. Both will work but ethernet is a little bit faster & a more stable connection.
@@xtremezone987 yes but ethernet and wifi are different things, if hes talking about the wifi why are you talking about ethernet?
Sure ethernet should be better in most cases but again, hes talking about wifi
Name of that case in the beginning?
im planning on getting the rx 7600 xt, and ryzen 5 7600 is this a good combo???
Why not 6700XT / 6750XT ?
@@GreyDeathVaccine I’m pretty sure it isn’t available in England as I’ve looked everywhere however I can’t find it
mostly agree but the gen4 nvme is pointless, nvme pci3 is already super fast and in most cases you really wont see a difference, go for a higher storage nvme pcie3 for the same price
The 3070 only has 8gb of vram. Just get a used 6700xt, used 6800, used 6800xt, or 10gb used 3080.
Hi, are two 16gb CL38 5600 mts ddr5 ram modules bad for a ryzen 5 7600? They are the only models my local dealer had available
The sweet spot for ddr5 ram for 7000 series is 32gb cl30 6000mts
It'll work but the CL is too high try getting one with a cl 32 or 30 espically for amd but what i did i got an intel xmp kit that was on sale 6000 MT cl 30 and it worked fine
I know it doesn't have the most optimal features, but it's what I got and I want to know if I'm really losing a lot of performance
no you won't lose alot of performanceso dont worry much@@Angel-em6od
thanks for advice this is the most important video i see it before the new generation comes on market
i appreciate your effort a lot
Any recommendation for AM4 mobo for Ryzen 5900X?
the 9000 series chips are mostly just more efficient chips at $100 price increases. for gaming they are not worth it yet.
I own 2 Ryzen 9 7900x machines with the 7900xtx and 7900xt I have no complaints whatsoever.
non x3d chips can be better than x3d chips (excluding the 7800x3d) because they have 2 CCDs and cpu struggles to pick one
plus only 8 cores benefit from the x3d thing and you wont need it unless gaming
Can anyone recommend a good GPU for a Ryzen 7 5700x3D? 1080p gaming.
Guys I am going to build a 5600 and a rx 6650xt or 7600 build I don’t know what to choose and now that I am watching this I feel like my build would be outdated it’s like 710 euro in Greece .😢
Thats the exact spec of the PC I built. The 6650xt is a great card for the price. I was running some games at 4k with it
@@chrissyboy7047 i got 5600x and 6750 xt and its very good combo, the only downside if u wanna stream u lack nvenc and u lack av1, if i were you i would skip 7600 and wait for a discount of smthing like 7700 xt
Meh I have an ARC A750LE and if you have rebar enabled you’ll see it bury the other cards….esp for $120 used
good video, no wasted talking
i messed up getting a fishtank case ;-; Everything's gonna be piping hot now :c
nahh dont worry fam. If anything just try to buy some fans like the vid said and you should be good to go.
If you add some intake and exhaust fans the heat will dissipate.
is h6 flow is bad air flow case?
nope, I have it and airflow is better than h9
hello hope u r good i have a 7800 xt and a corsair h150 cooler I'm looking forward to buy a cool case cz my case is getting heat alot i don't want a fish tank one, cz u said its not that great what do u recommend for me sir.(i dont care about the price alot but the lower the better if it does the work)
There are a lot of air flow cases, maybe a Montech Air 100. My 7800XT is in an Antec NX410 White case. There are a lot of non-fishtank airflow cases, as long as you can fit the GPU and the front intake is mesh I think the airflow has a chance. Case I have has 2 x 140 intake and 120 exhaust. Would price 60-100 about what you might spend on a decent case.
Idk only the people who have never used one says its bad. Maybe its just my config but i was playing sons of the forest with my friend who has a 4070. I have a 4060 ti, both of us got about 120 fps at 1080p ultra settings so. Both get about the same performance with the 4060 ti being about 150 bucks less
We’re already seeing the cut in all pc parts. There’s some gem prices like $450 for a 7800XT
If you’re thinking of getting a 4069 legit just get ANY mid or high end of the previous generation. Especially the AMD gpus have really reasonable prices, you can also get 1440p cards for the same price as a 4060. It’s just a bad card, low vram, high price.
4060 and 4060Ti have 16 gigs of VRAM available as well, not to mention that they are able to use DLSS3 and Framegeneration, which is quality-wise still better than AMD's solutions.
Buying an older 3070 for example cuts down on those features, pushes you to use suboptimal 3rd party solutions and are also more powerhungry aka inefficient.
Not to mention, that a 4060Ti is pretty much on par with the 3070 in rasterizing, but exceeds in the Raytracing category.
Gen4 NVMe's:
Dont recommend the P3 Plus, as it has terrible TBW rates and just exceeds Gen 3 Performance by a wee bit aka is a Gen4 slow poke that could petentially break quickly.
If you have just Gen3 available on your board, the other 2 are good options, but if you have Gen4 and want to have a drive that gets near the limit of Gen4, but is still affordable, i'd suggest a Lexar NM790 for example, its fast, affordable has very high TBW rates and also doesnt get very hot.
The thing is if you're going to pay more for the card you may as well just go and get the 4070 or better yet one of the AMD cards that have way more vram and more performance for the same cost. By the time you'd actually need all the extra vram you've hit the limits of the 4060.
Gen 3 nvme ssds are fast enough that you really won't know the difference between it and a gen 4 ssd. Not unless your moving massive files, in which case your going to need more storage than a 1TB drive.
If it’s mainly a productivity PC 7900X/7950X > their X3D counterparts