Это видео недоступно.
Сожалеем об этом.
Big Brake Kit For The Tacoma!!
HTML-код
- Опубликовано: 14 авг 2024
- Winners of the headlight giveaway are:
H4- Alex Gelinas
9007- D.oerman
H3- it was me guy's
Your one stop shop for powder coating: www.prismaticp...
Stone Black: www.prismaticp...
Kingsport Grey: www.prismaticp...
Redline Power Coating Gun: amzn.to/3dR7xhk
Plugs and Caps: amzn.to/3yyBdYx
Powder Coating Tape: amzn.to/3wlHqWd
Brake Calipers: amzn.to/3dUqzmX
Brake Rotors: amzn.to/3hJ4IQv
Brake Line Kit: adventuretaco....
Camera equipment used in the video!
Sony A7II Camera: amzn.to/2yprn1p
GoPro Hero 8 Black: amzn.to/31avsTg
Tripod: amzn.to/35P7oY5
Send me stuff!
PO Box 133
Chattaroy WA 99003
Some of the best work I’ve seen on RUclips! Enjoy every video on these builds.
Wow, thanks!
I hope you know that you are putting out the best content. I hope you keep giving us more for years and years to come. Keep living the Toyota Truck Dream.
Thanks man!! Glad you enjoy!
SRQ fab makes extended brake lines for front and rear (i think three inches longer front) that i have in my 3g4r and they’re very good quality!
I have never disassembled calipers down that far!! I always thought they were filled with magic brake voodoo.. ha ha awesome content and information as always Austin! Keep on keepin' on!!!
😂
Ha ha magic brake voodoo.
Because of these videos I’m gonna rebuild my calipers.
Awesome stuff👍👍 This is the best upgrade I've done on the 4Runner along with converting the rear to discs. Keep up the great content🍺🍺
It gets just better and better, that's awesome
As a helpful hint, remove bleed nipple and use compressed air line to blow out/remove the pistons. Just hold a rag against the pistons to catch them lol.
a 4runner rear disk setup would be pretty sweet too 👌
This is an easy kit, The bracket is From Australia but the rest of the parts you can get from Rockauto. www.designfab.com.au/buying/how-to/toyota-hilux-rear-disc-brake-conversion/
A little of conpressed air would have popped those pistons out without any effort or risk of damaging the piston with screwdrivers and pliers
Was just getting on here to say the same thing. 😂
I always leave a block of wood on the middle to prevent one piston from rocketing out before the others release.
I can't believe how clean the frame on that truck is!!
Not the rear end 🤣I'm from Cali. I have a 2000 4runner 3rd gen and the only rust is old mud.
What type of masking tape is used that can withstand the 400 degrees heat? Also is there any danger of the rotors becoming warped from the heat? Thank you for sharing your talent.
Beautiful tacoma project, always waiting for the next video 🔧⚙️
Is the new bigger calipers compatible with the stock wheels 🛞.
Hey where can I go buy this kit for my 96 tacoma 4x4 thanks
Killer brake up grade. Can't wait to see what's next.
Brake hose clip installation upside down
Do you need to upgrade the brake booster for this mod?
What do you do with rear drum brakes ? Stick with oem?
Love your work.
Please consider painting the bed cover in black!
The white just seems out of place
You put the clips for the braided lines on backwards.
Yup, thats why they have a little bit of play.
For factory lines yes, with these lines not exactly working with the mounts I had to improvise
Could I do this to a mk5 (2004) hilux?
Would you reccomend this on all tacoma's? Ive had issues with my brakes for a while...
Yes this is a great upgrade for the 1st gen tacoma
Hey I was wondering if you could post the part numbers for the hard brake lines and the brackets. I was going to buy the big brake kit but looks like I can buy everything separate for quite a bit cheaper. Thanks!
Hi I wanna do the upgrade to my 96 Toyota Tacoma but my Mechanics shop manager told me that the calipers are to big and I will have to get bigger rims other then the stock rims..??? Is this true ??
Will the 13WL brake calipers work?
Do you know if this will work for the 2wd 5 lug version mine are trash
Educational and learning about late model toyota tacoma trucks I like
They look nice
whats that green transparent tape called?
Its hard to make things with one hand, great video 😀
What the rotors brand from Amazon
how long to you degas them?
Tacoma calibers are notorious for premature failure i.e. one or two pistons seizing. Does this swap fix that?
Will these be a good upgrade the gen 5 4runner as well?
Congrats on the sponsorship!
Thank you!
There’s a guy on the forums that made a rear disc conversion kit using Shelby rotors
Everything you do is super clean!
What type of media do you use in your sand blaster?
80 grit aluminum oxide
Powdercoat seems like a better way to go over a rattle can. How hard is it to get a good looking part compared to a rattle can?
Do you have a part number for the calipers? I’m not a huge fan of the powder coated red calipers you linked in the description.
Will this work on a 2022 tacoma by chance?
That’s attention to details 👌🏾
What! No swap for the back brakes? well more like dog food bowle's I for the life of me don't know why Toyota puts em on the taco but no other Toyota truck?
When you reassembled the calipers, What did you tourqe the bolts to on the caliper halfs?
I couldn't find a spec, I just went tight plus a smidge haha
Do they make this kit for a gen 2 taco. If they do. Do you have a link?
Too funny, I saw my comment a couple times as you were scrolling back and forth.
you can pull out the pistons by air pressure ;)
And what toyoyota parts are so I can go buy them at toyota dealer
Will this work on a 3rd gen Tacoma
Does the 13WL work on a second gen 4unner
Another fantastic mod, excellent work sir!
Loving these videos. Quick question, what model of Kobalt air compressor are you using and do you like it?
It’s a 60 gallon. I have had it for 5-6 years and hasn’t let me down yet!
@@austinniemela Right on. Thanks!!!!
Good day, Awesome videos!! Will this work on a toyota 4x4 pickup?
Have you tried the cerakote products ? They work great on rifle parts and are very durable.
Yes I have! It’s a very good product!
Beautiful kit I wish I wasn’t broke
I work with UPS at PDX and we get entire airplanes full of Prismatic Powders and boy are they heavy
Lovin the progress bro, good work.
What do you do for a living?
Rats! I was all ready for you to be doing a drum to disc conversion on the rear axle. Updates on how the Kei truck is plowing??
Nice job bro show with name replacement car parts details work on doing u r work
Very nice job dude...i love it👍👍👍👌
Are those brand new oem calipers?
No they are aftermarket!
With the detail you're putting under the truck in places most won't see, do you have any plans for the paint on the truck? Man you put that second caliper together way faster! ;o)
Nutty
Damit man you make me want to find a new first-gen ....mine is a rusted-out shit box!!
The breaks are worth more then the truck
Did you paint the frame? If so what did you use?
Yes! I use napa chassis black or Eastwood chassis paint
Will this fit 3rd gen 4RUNNER?
Yes it will!
Use original stock brakes, save some dough $
Well that’s no fun!
why doesnt 20:25 he powder coat the bolts?
Congrats on the 100k subs!!!
Thanks!
So wear that masking tape not melt in oven under 400 temperature!!?
man I really do enjoy your videos wow
Good stuff right there
you will be able to sell this truck for around 30grand when your done, easy.
I think I would go for 45k considering and see where it lands but yea 30k easy
@@donkeyrider Today's market, and 1st gen 4 door, you could be right.
Nice work
Ahh my brand of bulbs aux beam
Love it!
The clips are backwards
Powder coat some rims!!!
👍👍👍
I can’t believe you stopped on my name for the 9007’s. When I watched the previous video I thought you had said 9003. I love my T100, but it seems like there’s nothing you can do with the headlights.
And 2nd
First
you sir, are a very talented individual !!
Adventuretaco.com has the brake parts you need.