Great video man! Very informative install, I’m looking forward to importing one!------- REMEMBER WHEN INSTALLING COILOVERS TO GREASE ALL THE THREADS SO IN THE FUTURE THEY DON’T SEIZE!!
Hello good sir ... very detailed... thanks ... anyway possible you could also do like a tutorial how to change the front parking lights to led without removing the bumper n headlight ?
Hey mate, thanks for the video - it was a godsend when fitting BCs to my Z12 Cube! Gotta ask though, did you ever experience any knocking from the rear? I preloaded the springs and torqued all the bolts down to spec, but when hitting any sort of bumps on the road there is quite a lot of knocking coming from the rear. Car handles amazing, but the knocking is quite unsettling!
Nice job, mate ! I am currently waiting for my BC Coilovers to be delivered for my Cube, so your video is just perfect ! Could you please share your stiffness settings ? And for the height, did you stay at like 13 mm at the rear like in the video ? And what about the front ? Thanks !
Nice! My stiffness is currently 5 clicks from the stiffest setting on both front and rear. This may be too stiff for you so just try and change if you're not too happy with it. As for height I'd say to just try installing them and play with height after, then test and readjust as needed. You probably won't get it where you want straight away 🙂 It's all pretty much trial and error to get it where it feels best for you. Also be sure to get a wheel alignment once you're happy with the height, it will make a huge difference.
Nice vid. How's it been holding up?. I have rsr down springs on stock struts and it's horrible creaking and rough. Looking at these coilovers, do you get any creaks or noises from suspension with these Cheers
Thank you! Still going strong, haven't noticed any noises or anything. I did recently soften up the dampening on the struts, just for some extra comfort though. Would definitely recommend these coilovers over lowering springs on stock struts (I had a similar setup previously)
Definitely tightened it up a bit. But as you know, the cube is not the most nimble/agile car so it's effect is limited haha! Still, much more confident in corners as I don't feel like I'm floating so much.
I just got a white Cube, what an awesome car!!! I dream over doing this some day!
Great video man! Very informative install, I’m looking forward to importing one!-------
REMEMBER WHEN INSTALLING COILOVERS TO GREASE ALL THE THREADS SO IN THE FUTURE THEY DON’T SEIZE!!
just got a cube, idk it’s my first car but i’m just so in love with it.
Oh nice! Yeah it's such an odd car but that's exactly why I love it! Happy to hear you're enjoying it too 😊
Hello good sir ... very detailed... thanks ... anyway possible you could also do like a tutorial how to change the front parking lights to led without removing the bumper n headlight ?
nice!! we need to see more !!
Hey mate, thanks for the video - it was a godsend when fitting BCs to my Z12 Cube! Gotta ask though, did you ever experience any knocking from the rear? I preloaded the springs and torqued all the bolts down to spec, but when hitting any sort of bumps on the road there is quite a lot of knocking coming from the rear.
Car handles amazing, but the knocking is quite unsettling!
I think you can still take out the perches in the rear if you wanna lower
Should make an update video on the cube!
why so much play in the upper mount holes / strut towers in the car ?
Nice!
Nice job, mate ! I am currently waiting for my BC Coilovers to be delivered for my Cube, so your video is just perfect ! Could you please share your stiffness settings ? And for the height, did you stay at like 13 mm at the rear like in the video ? And what about the front ? Thanks !
Nice! My stiffness is currently 5 clicks from the stiffest setting on both front and rear. This may be too stiff for you so just try and change if you're not too happy with it.
As for height I'd say to just try installing them and play with height after, then test and readjust as needed. You probably won't get it where you want straight away 🙂
It's all pretty much trial and error to get it where it feels best for you. Also be sure to get a wheel alignment once you're happy with the height, it will make a huge difference.
@@jordanlayt Thanks a lot for your reply !
Nice vid. How's it been holding up?. I have rsr down springs on stock struts and it's horrible creaking and rough. Looking at these coilovers, do you get any creaks or noises from suspension with these
Cheers
Thank you! Still going strong, haven't noticed any noises or anything. I did recently soften up the dampening on the struts, just for some extra comfort though. Would definitely recommend these coilovers over lowering springs on stock struts (I had a similar setup previously)
@@jordanlayt cheers for the reply mate. Yeh have a 2010 autech rider , shoulda just got the coilovers straight away lol. Live and learn.
Would they work on nissan wingroad y12?
#DIARYCUBE : LIKE
Have you think of using a modified bumper
Yes I've been keeping an eye out, but haven't found any that are available
Les servirán al Nissan cube z11?
How does this affect the handling? I've been wanting to make mine more responsive and tight. let me know!
Definitely tightened it up a bit. But as you know, the cube is not the most nimble/agile car so it's effect is limited haha! Still, much more confident in corners as I don't feel like I'm floating so much.
Legs under jacked up cars always scares me...
Can the z12 and z11 use the same bumpers ??
As far as I'm aware they cannot. It would mount up differently and not line up with curves etc
How wide are your wheels? 7 or 7.5"
These ones are 7.5" wide
I'd suggest trying to go 7 instead as I've since lowered even more and scrub when turning
Bro what is ur specs on ur wheels? Thanks
They're 17ich X 7.5 +42 offset
Tyres are 205/45 r17
@@jordanlayt thanks bro appreciate it..
@@jordanlayt ops, dis regard my question. Just noticed this.
You should help me do my car