hello sorry for my english translator obliges, I am from quebec and with this kit you can put your truck in 4auto, because here it has winters and a lot of snow on different site it says that you cannot put in 4auto
What's up Chase! My friend just got a 1995 Chevy Cheyenne 2500 4 wheel drive! It has 90,000 miles on it! No rust, perfectly clean! Everything works! What are some good mods you think we should do to it, he's 60 years old, but still loves modding vehicles! I'm 23 and blind so I can't drive!
I’ve done some research and it seems if you have the factory aluminum UCA it has retainer clips and isn’t common to pop out, so hopefully I should be good
Do they sell the kit with the 3in front lift and UCA without the rear blocks ? Just saw Buying the front lift and UCA separate is cheaper than buying the kit linked
i got a 14’ silverado and i have this 3 inch leveling kit. i’m wondering if it would be bad to throw it on without upgrading any of my suspension components?
Are your tires wearing out evenly on the front? I got a leveling kit on my truck but my front tires are not wearing out evening I had an alignment done to it last week. But the struts are the stock ones you recommend me replacing the struts?
I was actually just wondering the other day with all the tire swapping if you were going to do a video on how the leveling kit has held up over the miles... well ya did!! Lol Was also wondering if you’ve had any issues with the hubs or anything else in regards I the offset of the wheels??
Hey man, I just bought a 2017 Silverado out here in the Mexicos and even tho my english is decent, I can't understand fully BUT the bottom line would be to purchase and install the 3 in front 2 in rear leveling kit AND the upper control arm as well correct? I know the 3 in and the upper control arm will be installed in the front, but, do I need to install anything else other than what comes in the kit in the back, is that correct?
Did you keep the oem shocks for a 3” level? I bought bilstein 5100 which are longer then oem ranchos and it rides like garbage so stuff and it clunks cause I made the mistake of thinking that bilstein 5100 struts worked with lifts up to 2.75”. My point is if my bilstein 5100’s struts ride like crap how is it possible that you’re running a 3” level on even shorter oem struts
On real imfscrew viewers that have passed him on the road before watch the videos on their head unit of their trucks..... just a joke but I have passed him on the rode before truck is so much cleaner in person👌
I have a2014 silverado 1500. I put a3 inch lift. And I upgraded the upper control arm. But is Robin on the struck springs.. is the RC control arm. Any body had the same problem
Just got a 2018 Silverado with 30,000 miles on it, I want to lift it about 3 inches or so. I currently have 20 inch tires on it. Should I keep those or get bigger ones as I don’t want a void of space to big once it’s lifted, also do I just tell my auto shop to upgrade my control arms
Can i do the 3x2 leveling kit with stock wheels, 33” tires, and not have to upgrade the upper control arms? Ive seen that 33x12.50x18s dont rub on that leveling kit.
I have stock 20 on 33s is a ailment necessary right away yea I know is a still question but still and are stock rims less in the risk of having to go after market
Got the 3" motofab also with RC uca's, was considering up grading my front shocks. Any thoughts? Really enjoy watching your videos, you do a good job commentating what you do!
@@fishman80 I've had zero issues since I put them on, all my angles are good. Added bilstein shocks to the front, not able to tell alot of difference, but I'm pleased with everything over all.
Good afternoon sir I have a quick question for you I pretty much have the same truck is you your 2018 Chevy Silverado basically the same setup on the 22 by 12 and a half I bought the truck from the dealership the same way it sits every three months I have to go back for an annoying squeak in the rear end any idea what it could be before I head to a mechanic
Have the same exact truck and 3in moto fab level set up and had to replace my upper control arms because the factory ones fail. My truck has 24,000 miles and the level has been on since it was new. Highly recommend if anyone has a Silverado from 16-18 go with custom control arms.
Love your content! Bought a Trail Boss this past March. Love both body styles. Cleannnnnnnn looking truck.
Cleanest leveled Silverado I’ve seen👊
You can put 2” spacers in stock wheels and not rub with stock wheels and bigger tires
Hey man you have a clean truck
hello sorry for my english translator obliges, I am from quebec and with this kit you can put your truck in 4auto, because here it has winters and a lot of snow on different site it says that you cannot put in 4auto
Hey your 3" inch leveling kit, Awesome!!😉👍
How does the 3in sit compared to the 2? Witch one is actually more level? Does it have any lean to it? As far as the back?
I have a 3” level, stock rear. My front end sits 1/2” higher than the rear.
What's up Chase! My friend just got a 1995 Chevy Cheyenne 2500 4 wheel drive! It has 90,000 miles on it! No rust, perfectly clean! Everything works! What are some good mods you think we should do to it, he's 60 years old, but still loves modding vehicles! I'm 23 and blind so I can't drive!
Can you put these tires and lift on a 2020 Trail Boss?
By the way, mad silverado, mine is also white, but stock so fat, chrome grill but I'm thinking about painting it white, it looks dope asf
I’ve done some research and it seems if you have the factory aluminum UCA it has retainer clips and isn’t common to pop out, so hopefully I should be good
So you just added a 3 inch lift on the front not the back correct?? You didn’t add anything to the back?
Do they sell the kit with the 3in front lift and UCA without the rear blocks ?
Just saw Buying the front lift and UCA separate is cheaper than buying the kit linked
Ahh yes. New video.
i got a 14’ silverado and i have this 3 inch leveling kit. i’m wondering if it would be bad to throw it on without upgrading any of my suspension components?
I'm running a 2.5 front motofab. Been waiting for uca from them. They're not making them yet at least that's what their site says.
Are your tires wearing out evenly on the front? I got a leveling kit on my truck but my front tires are not wearing out evening I had an alignment done to it last week. But the struts are the stock ones you recommend me replacing the struts?
Great Video! I'm thinking of getting the exact same set up. Thank You!
I was actually just wondering the other day with all the tire swapping if you were going to do a video on how the leveling kit has held up over the miles... well ya did!! Lol Was also wondering if you’ve had any issues with the hubs or anything else in regards I the offset of the wheels??
No issues at all so far!
@@lmfscrew what is your rim and tire width. Also whats the offset?
Hey chase, if you ever wanna make Larry louder, you can hollow out the pre cats like mine is, great videos man
I eventually will but I have some Coil pack issues and it still has a stock muffler on it, but thanks for the encouragement🤙🏻
Or just have them cut off and put straight pipe on it
Keep it up man! I absolutely love your videos!
Hey man, I just bought a 2017 Silverado out here in the Mexicos and even tho my english is decent, I can't understand fully BUT the bottom line would be to purchase and install the 3 in front 2 in rear leveling kit AND the upper control arm as well correct? I know the 3 in and the upper control arm will be installed in the front, but, do I need to install anything else other than what comes in the kit in the back, is that correct?
What all do I need for a 3" leveling kit. For 2010 silverado z71 6.2
Hey man how does it tow the way you have it setup ? Family telling me it can’t tow.
So it still has that much squat with the factory blocks?
Did you keep the oem shocks for a 3” level? I bought bilstein 5100 which are longer then oem ranchos and it rides like garbage so stuff and it clunks cause I made the mistake of thinking that bilstein 5100 struts worked with lifts up to 2.75”. My point is if my bilstein 5100’s struts ride like crap how is it possible that you’re running a 3” level on even shorter oem struts
Only real lmfscrew viewers watch these videos on the head unit of their trucks.
On real imfscrew viewers that have passed him on the road before watch the videos on their head unit of their trucks..... just a joke but I have passed him on the rode before truck is so much cleaner in person👌
So this is 3" spacer in front and nothing in the rear? I dont understand how it's level after that much adjustment in the front
What kind of upper control arms did you get I put it 2 and a 1/2 inch level kit on mine
You should bump it down to 2”
Did u do Ready Lift 2.25 upper control arms?… any after that were 3 in with lift kit. I’m doing motofab 3 in front and 2 rear.
I thought you switched the readylift upper control arms to motofab?
I have a2014 silverado 1500. I put a3 inch lift. And I upgraded the upper control arm. But is Robin on the struck springs.. is the RC control arm. Any body had the same problem
Just got a 2018 Silverado with 30,000 miles on it, I want to lift it about 3 inches or so. I currently have 20 inch tires on it. Should I keep those or get bigger ones as I don’t want a void of space to big once it’s lifted, also do I just tell my auto shop to upgrade my control arms
Thinking of getting this so I should just upgrade the stock upper control arms?
Can i do the 3x2 leveling kit with stock wheels, 33” tires, and not have to upgrade the upper control arms? Ive seen that 33x12.50x18s dont rub on that leveling kit.
No issue with bearing and wheel offset? Thanks
Yes definitely the control arms
I have stock 20 on 33s is a ailment necessary right away yea I know is a still question but still and are stock rims less in the risk of having to go after market
What exhaust do u have truck sounds nice
So i was just looking and ready lift makes a control arm for a 2.5” lift. Is that what you have because i can’t find any for a 3” lift
How high does your truck sit with the 3" level?
Hay... did you have to do any trimming?
I thought you had the factory rear block removed?
Motofab and ready lift upper control arms have been out of stock for awhile now. Do u have any other brands u would recommend? Thanks
Dirt King.
DK Ball Joint arms and Alignment cam set.
stan thanks man I check into them
Got the 3" motofab also with RC uca's, was considering up grading my front shocks. Any thoughts? Really enjoy watching your videos, you do a good job commentating what you do!
i have the RC arms on my silverado, 2.5 level. thinking swapping that kit out for the mofab level kit. how is yours working with the RC arms?
@@fishman80 I've had zero issues since I put them on, all my angles are good. Added bilstein shocks to the front, not able to tell alot of difference, but I'm pleased with everything over all.
@@johnrichmond4656 That’s good to hear thanks for replying John.
@@fishman80 your welcome, good luck!
Beautiful truck brotha. Any problems with cv axles so far? Thinking about doing mine real soon
Rustezeeeeeeee 💀😂😂😂😂😂
Thanks for the video bro keep up the great work bro
Good afternoon sir I have a quick question for you I pretty much have the same truck is you your 2018 Chevy Silverado basically the same setup on the 22 by 12 and a half I bought the truck from the dealership the same way it sits every three months I have to go back for an annoying squeak in the rear end any idea what it could be before I head to a mechanic
Love the channel but my man needs to respond to comments more 💯
Your truck is high enough. Next time finish with running the cam under the middle.
How wide are those tires ?
How’d the CV hold up and lower ball joints
What’s your wheel/tire specs ?
What is your tire and rim setup. Whats your offset?
Did you cut off the front bump stop???
What size wheel and tire ?
Colbylanemyers sent me here awesome truck🤘
What upper control arms do
you recommend?
What's your tire and rim size?
22x12 with 33’s
What size tires and rims? And what’s the offset?
Do you have a link for the control arms
Is yours a true 3 or a 2.5 block
Are the struts extended?
anyone know if you can 3” lift a denali with magnaride, can’t find anything anywhere
What tires are you running?
I think we what to know what’s the next mod lol am I right? Lol
Nice truck... are those 33's on 22's? Thx
Yooo lmfscrew get some custom tail lights on larry
Did the 14/15 models have the same problem with the upper control arms?
Not like the 16-18. The stamped steel ones are a big problem
Have the same exact truck and 3in moto fab level set up and had to replace my upper control arms because the factory ones fail. My truck has 24,000 miles and the level has been on since it was new. Highly recommend if anyone has a Silverado from 16-18 go with custom control arms.
What control arms?
What size rims are those
where is your dog ?
What size tires are you running?