Это видео недоступно.
Сожалеем об этом.
Motofab's new leveling kit package! 2.5" - 3" lifts
HTML-код
- Опубликовано: 23 фев 2020
- In todays video we check out motofablifts new upper control arms and leveling kit for 17-18 silverado/sierras! We also do a step by step oil change on the truck!
Check out Motofab - motofablifts.c...
![Baby Kia - WYG (feat. LAZER DIM 700) [Official Music Video]](http://i.ytimg.com/vi/avlLsOH_oJc/mqdefault.jpg)
Well thanks for teaching me how to change my oil maybe next time you can label your post how to change your oil not leveling package
Did you cut off your bump stop that was for you uca
@lmfscrew for 3 inch front leveling kit can i buy and run the stock height front shocks ?
I just bought this exact truck and this is how I want it to look ❤❤❤ Just gorgeous!
Just got the MotoFab upper control arms put on my 2018 Silverado today after riding on the stock stamped steel upper control arms for roughly 2,000 miles with a MotoFab 3 inch leveling kit. As soon as I left the parking lot of the shop and hit the road I could immediately tell a difference. The ride quality on the truck is so much better now with the motofab control arms than with the stock control arms. Everything looks and feels promising, but time will tell.
You got the new version as shown on the video or the "old version" ... I was told that the old version must likely rub with you wheels or so. I'm quiet not sure about this new ones. I gotta do my swap ASAP... I am now at 19k miles with 2.5 leveling kit.
Francisco Garcia Mine are like the ones in the video, no rubbing that I could tell, even at full lock and I’m running stock 18’s and 31’s
@@jason.godwin thanks for the info. Will be making the upgrade soon.
Francisco Garcia 👌🏻 No problem man
Are you still running motofab upper control arms? How are they? Have you had any issues?
Came for the kit. Hung out for the oil change. Lol
My 17 Silverado is at 2" level kit. Want to upgrade to a 3 with a upper arm set. Might just order these sounds like a great deal.
I would run wix xp oil filters
Always look forward to your vids man. Just picked up a 14 Silverado myself and these videos are awesome!
February 2020, good ol days
The Purolator boss filter has a synthetic media that filters out smaller micron material.. Mobil 1 has a synthetic blend media that filters out a little larger microns but has good capacity. Either way, your only putting 5000 miles approximately on each oil change which is only about a third of the filter life. You could go with a mid grade filter and save a few $$. Those are usually a syn blend filter also.
I wish there was an upper control arm that fit with the stock 20s and the level kit
My first oil change I did amsoil signature annual oil change and a year later I now have a baby and not as much money. I went with the same valvoline oil but used the mobile 1 filter you removed. I feel she runs just as smooth with valvoline as she did with the amsoil. One trick I use to keep track of my oil change intervals is the second trip odometer in the display in the gauge cluster.
Those upper control arms look badass
I have the same leveling kit by motofab. Just waiting on my upper control arms to come in before the install! 🤙🏻
Hit a washout spot on some hunting land with my 3 inch motofab and stock upper arms, definitely got that kachow mod. Been running the rough country upper arms ever since and they seem to be doing quite well
My 14 Silverado has had a leveling kit for 80k miles no issues so far , just a rough ride. Definetly need to get better UCA but so far they’ve been fine
I use the same oil but with an acdelco filter
No catch can yet bud? I just installed mine
I just put 2.5 level kit on my Silverado you think I can ride for a while before changing to after market upper control arm
I got the 3” level and their control arms and my angles are better than stock on the ball joints
You should do more vids on larry
coming soon
I use NAPA Gold oil filters! I use it with Mobil 1 full synthetic oil. Yes, you can use the NAPA gold with full synthetic oil. I called Wix, which makes Napa oil filters, among other oil filters, a representative told me that it is safe to use the regular wix or Napa gold with full synthetic oil as long as you follow your vehicle oil change intervals
Just installed the the 3” front with 2” rear motofab lift kit with their upper control arms on my ‘19 LD Silverado with a diff drop from supreme suspensions and rear shock mount extenders and the angles are all good in the front, and the truck rides just as good as it did stock. Very happy with the lift so far.
is the diff drop needed or did you do it just incase?
Well I use boss or mobile one filter never hade any problem with them let me know what you think of it
No dry start by not filling oil filter. You actually put in oil through the valve covers which will lubricate everything on its way down to the pan. The pick-up tube draws from the lower sump of the pan. If you can start your truck within 5 or so min after finished filling up you'll be fine tbh.. but great review on the suspension bits brother
Appreciate the effort and taking out the guess work on these parts.
Did you have any issues with the cv axle rubbing on the lower control arm after the 2.5 level in the front?
Get a 5" spindle lift with 2" top spacer run the motofab control arms 👌🏼👌🏼
Would this work with my 5’RC lift, I have the lifted struts, would the 2’ rear block be good with my 5’rear block?
use acdelco filter
Can u get alignment right with the 3” leveling kit? I was told mine is maxed out
Would it work for a 2 inch leveling kit
The Purolator Boss is a good oil filter bro. It’s made by champion labs which is WIX. I have cut several open along with the WIX and they are great filters. When I can’t get K&N or WIX I get the Purolator Boss. WAREAGLE
I use super tech full synthetic oil and Fram synthetic filter all cost me $35 at Walmart 🤷🏽♂️
Got a question I’m looking to put a flowmaster super 10 muffler on my 16 Sierra would a 3inch Inlet /outlet work perfectly?
What you think about factory aluminum control arms? They look way stronger
Ey man what’s up.
Did you ever installed these motofab upper controls? Do you have a video?
So if you had to do it again, would you buy the motofab or the ready lift upper control arm? I have the motifab 2.5 front level block installed and looking at upgrading my UCA.
How’d those upper control arms hold up? I got the 2” level with the 1” block in rear for my 16 Silverado but am not sold on quality of the ball joints and bushings in the UCA’s…. Great video
Follow up, fuck these level kit
What about diff spacers?
What did you do to rear?
Does the 2wd use the same upper control arms as 4wd? I wonder if since 2wd is 1.5” lower than 4wd if it can take 3” front kit with less ball joint problems...
Hey did you trim or no I am trying to get the same kit and get 22 by 12 as well I was wondering if after a trim it won’t rub
Do you think this control arm helps with rub on the control arms any? Think you might’ve mentioned one kit where they where working on that.
will aftermarket control arms fix my 33x12.5 tires from rubbing the arms?
They look like zone uppers
What happens to the other video on the arrest on the guy that did a burnout?
It got claimed. It's under review from youtube.
lmfscrew oh ok
Do these uca’s help with alignment? I have the factory uca with the 3 in lift and I feel like the wheels are towed in a bit, I just wanna know if the uca will correct that as well
Stupid question. Do you get upper control arms for both front and back? Or one or the other? Or if you lift just front than just lift the front and same thing with the back? I bought the Moto fab front and rear leveling/lift kit (2.5”/3”) and I was wondering if I should order two sets, one for each wheel & ball joint or if I just need to order one set. Any help would be great. Don’t know much about trucks so I know this comment probably isn’t the greatest 😂
With the bds leveling kit it has the block up top but also a piece that goes in the spring to ensure it runs at close to factory angles.... would I need upper control arms with that kit?
You still have these control arms?
You need to get snowflake reps on rbp tires
How are the CV angles?
Rough country 5inch lift and 35s?
What are your thoughts on the rough country 3.5” knuckle kit?? With the diff spacer as well
Do you think I should get the motofab upper control arms or the ready lifts upper control arms for my 2016 Silverado?
I haven't ran the motofabs so i can't say they are superior or not.
lmfscrew might just pay the extra money and get the ready lifts especially if you haven’t had any problem with them.
@@dsant2093 I run the readylift uppers on a 3" motofab. So far its been 7k on them. All good. I found them used on amazon. Saved $200 ish from new. They were just a open box.
Project A.D.D what is your wheel and tire setup? Offset? No rubbing or anything?
Get a 4 inch lift and some 35s
Can you send the Item# of that new kit seem to not find it.
Selling the 3 inch and control arms?
Aye man were they able to get your alignment pretty straight after you put them A arms on ?
Hey did you have to replace rear shocks after installing this kit?
Will this kit works for my 17 Sierra with 22x12 -44
How is your cv axles on you current lift? Surprised you didn’t say anything about them lol
what kind of camera setup are you using to film this?
You should just get a 4in suspension lift
Will this work on my 2017 Sierra with 22x12 -44?
Giovanni Lopez it should
Do you still need to change control arms if you do the 2.5 lift?
It's never a bad idea
They sent me the wrong ones right before a 2 week snow storm. I needed this done asap to go get food for those 2 weeks. Now I'm snowed in with minimal food!!! I'm fkn pissed and motofab hasn't responded to me. Fk motofab
Will this kit work on 4x4
Just on the 2018 Z71 Silverado’s
You wanna sell them bkt’s
Thanks for the vidio brother !
Doesn't this ride like shit cause your stock shocks are completely maxed out..
Sam Fascione no the lift is on top of the strut assembly, so basically the only thing your doing is dropping the strut lower. Hope that helped
if you want to sell the old uppers reply and ill shot you an email!
Sell me the control arms!!! They are currently out of stock :|
Moyces Cruz bro I feel this I’m literally checking 4 times daily
Will a 3 inch leveling kit with upper control arms be good for my 4x4 Silverado ? Is it capable of off-roading with out breaking anything ?
Ht
Use Fram