Nissan Maxima Drivers or passenger side CV axle replacement full guide for all Nissan CV Axles
HTML-код
- Опубликовано: 11 окт 2024
- Due to factors beyond the control of RB The Mechanic, it cannot guarantee against unauthorized modifications of this information. RB The Mechanic assumes no liability for property damages or injury incurred as a result of any of the information contained in this video. RB The Mechanic recommends to follow safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of RB The Mechanic, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not RB The Mechanic.
RB The Mechanic. All rights reserved. Publication, reproduction or distribution of this or any video by any means whatsoever, including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world, is strictly prohibited without the prior written consent of RB The Mechanic.
#nissan #axle #nissanaxle #2008nissanmaximaaxle #nissanmaximaaxle #nissanmaximaaxle #2009nissanmaximaaxle #replaceaxle #driverssideaxle #passangesideaxle #nissanmaximaasle #2009maximaaxle #2010maximaaxle #2011maximaaxle #2012maximaaxle #2013maximaaxle #2014maximaaxle #replaceaxle #muranoaxle #2010muranoaxle
absolute best video I've seen yet. I'm trying to work on 02 sencers too upstream for Same car 2009 Maxima. do you have a video?
Thank you should be very much similar
Very helpful video. I didn’t even bother to hammer at it to get it loose after watching the vid, I just took the power chisel to it right away and it popped off in few seconds. This video saved me $1,200. Nissan wanted $995 for parts alone. Thanks for putting this up.
Good job bro!!
When you chisel are you chiseling to seperate where they screw in and if so did it mess up the bracket on the car?
One of the best videos I’ve found so far !
Thank u
Great video! I've watched a few videos on this process. None of them placed a pan below the trans. You definitely need to do that! The CVT fluid comes out, if it's not low like on this car. You also need to have a quart or two on hand to refill it. Mine was full before and drained out, when the axle came out. Thankfully I followed your procedure and didn't make a big mess in my garage! Thank you RB!!!
Yup
Best video for sure! Clearly narrated...bada bing bada boom!...and clear shots. Wish I had a lift and impact wrench too, though!
Yeah bro without it will be hassle
Perfect! Super helpful! Thanks for taking the time to put this together.
Glad it was helpful!
Nice job man, well done. Brake rotor looked new, tie rods pretty much dead.
Yes
YO!!! FYI this perfect video shows you the exact same set up as a 2020 Pathfinder SV.
THANKS BRO!!!
Oh nice !!!
Easy to follow video. Very informative. Thanks.
Yup
You made this look so easy I will be doing this soon but I have to change hub bearings also....good times lol
Oh cool I have video on bearings as well
I think I watched it,but I'll make sure need all the help I can get never did it before
@@kylosolo8815 ok
Makes the job look easy!
Yeah not so bad to do
So it’s the same process for an Altima going to be tackling one tomorrow
Similar
Very good Video ! So on a 2001 it shoud be the same steps and no presence of transmission fluid ? Tks
I think 2001 is diffrent and fluid will leak out
Hey bro do it gotta click cause it's not going in and I don't have no clearance for it to be push on a 2000 maxima it has a housing just with the house it just hanging
@@alexcaraway6537 which side
Trying to do mine now and it won't come out. I guess I need an air chisel. Does it not mess up the part it bolts too?
Yeah bang it with chisel
Hi brother. You said don't use auto zone parts. Why is that? And which part would you recommend and what would be the price? I need to get it changed and I am asking so that no body rips me off and uses the correct part.
I would go original or ac delco timkin is the brand I use $150 axle brand new no refurbished or core ford it
@@RBTheMechanic and why would you not recommend the auto zone one? What could be the issue? I need one that ensures my car runs for atleast another year or so.
@@revert2theStr8path because they rebuild it they don’t fix the acuator wear and tear new boot and greasing dosent mean. Axle is rebuilt it’s still will make click click sound. If they got core that’s a sign they refurbish them
Where did you get the axle from because the autozone one doesn’t have the bracket
My local part store
Where did you get your cv axle from? Dealership are extremely high on parts.
I purchased it from buywise auto parts in NJ north.
Does this have to do with the transmission driveline also ?
This is part of powertrain connected to transmission and puts out power to wheels
Good video Brother. Thank you.
Welcome!!!!
good video thank u
Glad you liked it!
I have a 16 Nissan Maxima platinum v6 3.5 . The axle is stuck. Any advice
Which side axle? And stuck where in hub on other side
@@RBTheMechanic the passenger side. I’m not sure where it’s stuck. I think I’m the middle. 2 mechanic tried to get it off for 8 hours with no success.
@@RBTheMechanic it didn’t budge at all
@@Ahamilton89 the bearing u have to use air hammer or pry bar did u take off the bolt off the bearing in center
Thanks so much. I’m having another mechanic work on it tomorrow. The other mechanic gave up. I’ll let the new mechanic know if he runs into the same issue. I really need my car fixed.
How much you charge for a job like that?
This was total like $390
With parts or just labor?
@@rudymarius1706 with part
I had the axle done and A/C compressor cost me $600 in labor $350 in parts felt like price was high and could of done it myself but I'm in New York and it's cold so I just paid the man
How long in total should this take if your doing it “@ home”
40 minutes
YOU CAN NOT DO IT ON JACK STANDS... YOULL BE SCREWED... STRUTS YES AXLES NOOOOO!... VEHICLE NEEDS TO BE IN THE AIR ESPECIALLY FOR THE PASSENGER SIDE. TOOK ME 2HRS OF AIR CHISLING
@@kevinkieel6778 jack stand is tough
@@RBTheMechaniccan be done I did it before on jack stand both sides but passenger side is pita to get it out
@@Sroor90010 yeah
Could this leak transmission fluid ?
Well there’s axle seal at the point where axle enter’s transmission that could be bad or get damaged when doing the job u have to be careful when installing it
Be very careful putting the axle into the tranny! It's very easy to tear the seal!
Yupp
I thought you were going to show the driver side
It’s same process just easier dosent have the center bearing pop the axle out with pry bar
Make sure the shafts tip isn’t running against anything while u try nd remove it I find a hammer 🔨 to always be enough if I hold it straighter and tap it and rotate it it comes
Does this apply to a 2017 Altima
Yup
Might be but diffrent but over all similar
Is this the same process for a 2016 maxima the newer gen
Should be same
Thank you for answering Appreciate it