Cheers !. If the driveshaft comes out you'll lose a lot of oil from the gearbox. You could probably position an oil catch pan underneath it as you work, just in case. The driveshaft is held in the gearbox with a spring circlip so it shouldn't come out too easily but, if it does, you can carefully slot it back into the gearbox. Just be careful not to damage the oil seal.
Great video. Working on a Nissan Figaro and the system is pretty similar with the Micra you are working on. Can't get the joint to separate from shaft at the moment in spite of how much i bang on it with a hammer. back at it tomorrow. Overall, great video!
Nice job, but i think is better to pull out whole shaft, plug transmision hole with something to protect any leak (any way will by not big leak, car is jacked up on one side) and replace both cv boots, always change both, you will need to do another boot in couple of months, you can do it at 1 job. And maybe more grease is good do use. I did it last week and I ordered CV boot kit and it was 2 grease sacks of grease for each cv boot.
Hey is still me, my micra wen i go over 100kmh the front of the car starts shaking do you think maybe i need to change the grece like you did on the video in order to fix it? (The tires are new)
There could be a few different reasons causing that shaking. It could be a problem with your tyres, wheels, brakes, steering, suspension, axle or engine. You'll really need to have a mechanic check that out and find the cause
Thanks!
Thanks for your support Sean !, I really appreciate it 👍
Thank u More practical and no blabla
Thanks for watching !
Yup. Really good again. What happens if the driveshaft comes out? Because that’s bound to happen when I do this job😀
Cheers !. If the driveshaft comes out you'll lose a lot of oil from the gearbox. You could probably position an oil catch pan underneath it as you work, just in case. The driveshaft is held in the gearbox with a spring circlip so it shouldn't come out too easily but, if it does, you can carefully slot it back into the gearbox. Just be careful not to damage the oil seal.
Great video. Working on a Nissan Figaro and the system is pretty similar with the Micra you are working on. Can't get the joint to separate from shaft at the moment in spite of how much i bang on it with a hammer. back at it tomorrow. Overall, great video!
Thank you, it should be the same. Just be careful not to pull the other end of the shaft out from the transmission !
Super Great videos....very methodical and organised person....
Thank you :)
Nice job, but i think is better to pull out whole shaft, plug transmision hole with something to protect any leak (any way will by not big leak, car is jacked up on one side) and replace both cv boots, always change both, you will need to do another boot in couple of months, you can do it at 1 job. And maybe more grease is good do use. I did it last week and I ordered CV boot kit and it was 2 grease sacks of grease for each cv boot.
Thanks, I'm just demonstrating the process on one side of the vehicle :)
great video, i have to put a cv joint on a Citroen ds3 as soon as the part comes, thank you for the video.
Thanks for watching !
Great video again, concise and precise, the professional way, I love it. Congrats!
Thanks for the knowledge you shared, it was very helpful. I will like to see more on how replace clutch plate on the micra k12
You're welcome. I don't have the Micra any more
Thank you for your great knowledge u giving to us
Thanks for watching !
Thanks
Thanks again Dave, your support is much appreciated ! 👍👍
Brilliant video. Very clear and well explained. ❤
Thanks for watching !
Very well explained, looks relatively easy.
Thank you !
I really enjoyed my Thursday on u RUclips
Nice job. Thanks for posting this. ❤
You're welcome, thanks for watching !
Should more grease be added to inside of rubber boot
Super thanks 😊 🙏 you saved the day!
You're welcome!
Excellent content 👌 very helpful. Super like 👍
Thank you !
Super Job & video👍👍👍🙂💪👍
Thank you 👍
Great job.
Thank you !
Thank you very much dear.
You're welcome
Nice video!
Could you plese do the same for a 206/207 car?
I don't have access to either car at the moment, sorry
Is it the same in Micra K13?
Hey is still me, my micra wen i go over 100kmh the front of the car starts shaking do you think maybe i need to change the grece like you did on the video in order to fix it? (The tires are new)
There could be a few different reasons causing that shaking. It could be a problem with your tyres, wheels, brakes, steering, suspension, axle or engine. You'll really need to have a mechanic check that out and find the cause
@@screwsnutsandbolts all right, thanks a lot for all the videos you have done whit the micra they really helpful
You're welcome, hope you get it sorted out.
❤❤❤❤❤❤
Thanks !
tink's
👍
Thanks !
Oii BOA NOTI
🇲🇦🇲🇦🇲🇦
Thanks
You're welcome !