You nailed your planks instead of using glue. I think it's geat, very authentique. Although I was hoping you showed us how you caulked the boat.That would have been awsome. ; )
Hi Eddy! Thank you =) I will apply a second layer of planks on this boat. Since it will be an RC boat I will probably be using resin to make the hull waterproof
Great video. Very clear and helpful. One question though: you taper all the planks first, having calculated the required width at each bulkhead. Yet, later, you taper individual planks again, even though they should already have the correct width. Why is that necessary? And why does that not result in gaps, since the twice-tapered plank is now narrower than it should be? What am I missing?
I appreciate your channel so much! I am learning a lot, am about to build a Sterling 40" planked powerboat. Your work is really beautiful; being able to watch you work is worth about a thousand books. No detail is too small, since these problems loom when we build and seeing how a pro foxes the glitch is very informative. May I ask what type of filler or putty or Bondo you are using? I am already going to use the Tightbond...
Hi! Thanks for your comment I really appreciate it :) For this model, after applying a second layer of planking I will be using a special resin for Ships’s hulls as this will be an RC boat. The resin will fill the small gaps between planks (if any) and seal the hull. Gaps have to be really small though, using fillers or putties or bondos to fill gaps is not best practice especially for RC wooden boats. If your boat is just for display and you want to keep the natural look of wood then you can think of using shellac (still no gaps between planks) :)
Hi @pwsod! Thanks for the suggestion, i was already thinking of making a complete guide of tools needed. I already published a video on the top 6 electric tools any modeller should have, you can find it here: ruclips.net/video/S48aNtaZdko/видео.html
91% of the people who watched this video did not subscribe to the channel. If you want to support me and encourage me in making more videos about ship modelling you can show me your appreciation by subscribing to the channel, it's free =)
You can find the other parts below: Part 1: ruclips.net/video/EDV3IEmmmew/видео.html&t Part 2: ruclips.net/video/3D-ISTafaU0/видео.html Part 3: ruclips.net/video/n80xr0VYC6s/видео.html Part 4: you are here Part 5: ruclips.net/video/bZgRYk_XQ4E/видео.html Part 6: ruclips.net/video/aqHfI0svbiA/видео.html Part 7: ruclips.net/video/xs6TW6OSuGE/видео.html Part 8: ruclips.net/video/baCRjx6DboI/видео.html Part 9: ruclips.net/video/BhsX4KeVuHk/видео.html Part 10: ruclips.net/video/TW5NT5xE9V4/видео.html Part 11: ruclips.net/video/FXk-H0ZgNt4/видео.html Part 12: ruclips.net/video/CybjsdaI1J8/видео.html Part 13: ruclips.net/video/xwO1jg15m_4/видео.html Part 14: ruclips.net/video/iFn1tpDTDgg/видео.html part 15: ruclips.net/video/LnepjXmAfVc/видео.html or you can check out the full playlist: bit.ly/3pz1Jyl
Thanks! That’s very kind of you :) yes it’s the same principle! Of course it depends on the model: a model with curvy lines might require a bit more attention
Generally yes, but the plank will require bends and twists to prevent buckling. The best jig is your hull. Soak the plank and clamp into position, let it set, it's now a perfect fit.
@@Tagliamare The planks on the clipper are extremely tight on the bow, a lot different than this ships hull. It's ok I'll find my answer elsewhere. thanks for the reply.
How do you work out the taper of the planks ? My dad has left me two of these wooden ships as well as all the material. He's to old to finish them so gave the whole lot to me. He assembled the basic hull structure , but no planking yet.
Hi! You can see how i taper the planks at 02:30 and how i work the stealer plank at 10:05. Planking is not an easy job, but you can manage! Just don't rush, good luck =)
@@Tagliamare Thanks! Just picked one up. Btw, kudos on your videos. I have viewed many but yours are the best. You have taken the time to position your camera so the viewer can easily see exactly what you are describing and doing. Too many others are too far away or block the view, making it difficult to learn.
@@Tagliamare Great! I and a host of others are counting on you (I figure I have a year’s worth of work ahead of me and will be looking at your videos for tips, tools, and techniques!
Hi! It's easier than it looks, trust me. Watch the video slowly so that you can understand every step. Most important thing just take your time, no need to rush into things. If you feel tired or anything just retry the next day =) You can do it!
Finishing the ship is my favorite part of the job)))
Very impressive, though as i am getting on in years, i had difficulty hearing you, but very impressive work. You have inspired me.
Thanks :) you can activate captions. I wrote the subtitles myself so that people can just read and watch if they have any issue with audio
Nice idea on the aluminum channel as a jog for the tapering. Will put that idea to good use.
Glad it was helpful!
Truly helpful. Thank you so much for sharing your technique!
Thanks Brian!
Thanks for sharing your methods, really useful for newbies like me.
Really happy you found it useful =)
Thank you very much for your professionalism and your ability to accurately introduce the required materials and sizes as well as work methods
Thank you very much! Really appreciated
Extremely satisfying!
I use double sided tap for planking manly Saturn and bow no nails or clips whear it bends it works for me try it
You nailed your planks instead of using glue. I think it's geat, very authentique. Although I was hoping you showed us how you caulked the boat.That would have been awsome. ; )
Hi Eddy! Thank you =) I will apply a second layer of planks on this boat. Since it will be an RC boat I will probably be using resin to make the hull waterproof
you make it look easy......thanks for the video
شكرا على هذا الدرس المفيد Thanks.
A good video
Great video. Very clear and helpful. One question though: you taper all the planks first, having calculated the required width at each bulkhead. Yet, later, you taper individual planks again, even though they should already have the correct width. Why is that necessary? And why does that not result in gaps, since the twice-tapered plank is now narrower than it should be? What am I missing?
Thank you!
Simply some planks might need to be tapered in a specific way or you need just 2 of that shape. No need to bulk
I appreciate your channel so much! I am learning a lot, am about to build a Sterling 40" planked powerboat. Your work is really beautiful; being able to watch you work is worth about a thousand books. No detail is too small, since these problems loom when we build and seeing how a pro foxes the glitch is very informative.
May I ask what type of filler or putty or Bondo you are using? I am already going to use the Tightbond...
Hi! Thanks for your comment I really appreciate it :) For this model, after applying a second layer of planking I will be using a special resin for Ships’s hulls as this will be an RC boat. The resin will fill the small gaps between planks (if any) and seal the hull. Gaps have to be really small though, using fillers or putties or bondos to fill gaps is not best practice especially for RC wooden boats. If your boat is just for display and you want to keep the natural look of wood then you can think of using shellac (still no gaps between planks) :)
Thanks for the video! I wish to start my adventure with wooden models but the amount of effort required to do planking correctly scares me off :-)
Don’t be afraid of making mistakes and take your time :)
We have seen you use several pieces of equipment and was wondering if you would do a video of the different tools you use please?
Hi @pwsod! Thanks for the suggestion, i was already thinking of making a complete guide of tools needed. I already published a video on the top 6 electric tools any modeller should have, you can find it here:
ruclips.net/video/S48aNtaZdko/видео.html
@@Tagliamare Thank you Tagliamare.
Can this be motorized,transitioned into a Remote control vessel? Would love a tutorial if so,im currently trying to build an RC craft
This is exactly what I do :) check out the Fifie playlist
91% of the people who watched this video did not subscribe to the channel. If you want to support me and encourage me in making more videos about ship modelling you can show me your appreciation by subscribing to the channel, it's free =)
You can find the other parts below:
Part 1: ruclips.net/video/EDV3IEmmmew/видео.html&t
Part 2: ruclips.net/video/3D-ISTafaU0/видео.html
Part 3: ruclips.net/video/n80xr0VYC6s/видео.html
Part 4: you are here
Part 5: ruclips.net/video/bZgRYk_XQ4E/видео.html
Part 6: ruclips.net/video/aqHfI0svbiA/видео.html
Part 7: ruclips.net/video/xs6TW6OSuGE/видео.html
Part 8: ruclips.net/video/baCRjx6DboI/видео.html
Part 9: ruclips.net/video/BhsX4KeVuHk/видео.html
Part 10: ruclips.net/video/TW5NT5xE9V4/видео.html
Part 11: ruclips.net/video/FXk-H0ZgNt4/видео.html
Part 12: ruclips.net/video/CybjsdaI1J8/видео.html
Part 13: ruclips.net/video/xwO1jg15m_4/видео.html
Part 14: ruclips.net/video/iFn1tpDTDgg/видео.html
part 15: ruclips.net/video/LnepjXmAfVc/видео.html
or you can check out the full playlist: bit.ly/3pz1Jyl
First rule of planking. No plank must ever finish at a point!
Brilliant planking best I've seen does the same principal apply with kit ships how you've planked ?
Thanks! That’s very kind of you :) yes it’s the same principle! Of course it depends on the model: a model with curvy lines might require a bit more attention
Generally yes, but the plank will require bends and twists to prevent buckling. The best jig is your hull. Soak the plank and clamp into position, let it set, it's now a perfect fit.
Can you show how to plank a pointed bow hull like on a Baltimore Clipper?
The technique should be pretty much the same the one I show in the video =)
@@Tagliamare The planks on the clipper are extremely tight on the bow, a lot different than this ships hull. It's ok I'll find my answer elsewhere. thanks for the reply.
Надо было наточить карандаш.
How do you work out the taper of the planks ? My dad has left me two of these wooden ships as well as all the material. He's to old to finish them so gave the whole lot to me. He assembled the basic hull structure , but no planking yet.
Hi! You can see how i taper the planks at 02:30 and how i work the stealer plank at 10:05. Planking is not an easy job, but you can manage! Just don't rush, good luck =)
@@Tagliamare Sorry, what I meant was how do decide how much to taper them by ?
@@v8cool168 You can see that at 00:41
Where can one get the metal channel tool that you use to hold several of the planks in place while you sand them together?
Hi @Booterman, it’s a U shaped aluminium profile. I bought it in a hardware store
@@Tagliamare Thanks! Just picked one up. Btw, kudos on your videos. I have viewed many but yours are the best. You have taken the time to position your camera so the viewer can easily see exactly what you are describing and doing. Too many others are too far away or block the view, making it difficult to learn.
@@adminjava1 This kind of comments really encourage me in making more video =) Thanks @Booterman!
@@Tagliamare Great! I and a host of others are counting on you (I figure I have a year’s worth of work ahead of me and will be looking at your videos for tips, tools, and techniques!
What is optimal thickness of planks?
It depends
@@Tagliamare I’ll go with 2x6mm
If you make two layers and your planking is good than you should be fine
That Looks so hard 😭 I dont know how to get started with it
Hi! It's easier than it looks, trust me. Watch the video slowly so that you can understand every step. Most important thing just take your time, no need to rush into things. If you feel tired or anything just retry the next day =) You can do it!
Please focus more on the educational aspect, especially the sizes and maps
These videos are great but I'm sorry I have to say, they would be much better without the royalty free stock music
Thanks for the feedback. This is an old video, I’m sure you are going to appreciate the most recent ones . Improved since then:)
haven't seen anything lately on the fifie, are you still working on it?
Hi Donald, bit busy at work lately.
I’m working on the second layer of planking at the moment. Hope to release a new video soon :)
@@Tagliamare
I just found your video on RUclips. I will be starting a build log on the Model Ship World forum soon, as I build my Amati Fifie.
@@donaldsmith1217 that’s great! Are you going to scratch build too?
@@Tagliamare no, I have the Amati kit