HMS PEGASUS : Amati : Scale 1/64 : Step By Step Model Ship Build : #05 - Second layer of planking
HTML-код
- Опубликовано: 2 окт 2024
- #amati #olhabatchvarov #amatishipmodel
"Making the second layer of planking"
Building a ship model of the HMS PEGASUS (1776) in scale 1:64. Kit manufactured by the Italian company Amati. Here I share my personal impressions of the kit and results.
HMS Pegasus was the sixth of 25 Swan Class ship rigged sloops ordered by the Admiralty between 1766 and 1780. Built at Sheerness Dockyard, Pegasus was launched on December 27th, 1776.
💡All videos about the sloop HMS PEGASUS in the PLAYLIST:
• HMS PEGASUS (1776)
🔥This video has subtitles that you can translate into any language🔥
🔥Here you can find a Step-By-Step Guide based on this model🔥
en.shipphotogr...
⚓️Link to this specific kit:
store.amatimod...
🎞What's in the box:
• Unboxing The HMS PEGAS...
🔴Channel's main page:
/ olhabatchvarov
🔔Subscribe to the channel - not to miss any issue:
/ @olhabatchvarov
💰You can thank me for this work in the form of "LIKES" or become a member of the channel here::
/ @olhabatchvarov
🔥Official channel website:
www.shipphotog...
📨Contact me:
www.shipphotog...
⛵️GALLERY of my models:
www.shipphotog...
⛵️🇺🇸🇺🇦
#shipmodelbuilding #shipmodeling #modelismonaval
🔥Thank you very much for your comments! 🔥I appreciate them all! I will answer everyone in the following order: comments from sponsors - comments that contain questions - and the rest ... I try to do it as soon as possible, but every day more and more of them)))
Keep in mind that RUclips blocks comments with links, so I always leave them in the description under the video!
********
🔥 Щиро дякую за ваші коментарі! 🔥Я ціную їх усіх! Я відповім всім у такому порядку: коментарі спонсорів - коментарі, які містять питання - і решта... Я намагаюся зробити це якомога швидше, але з кожним днем їх все більше)))
Майте на увазі, що RUclips блокує коментарі з посиланнями, тому я завжди залишаю їх в описі під відео!
You should not be surprised about your popularity, your work is fascinating and very educational so I am sure your fan base will continue to grow.
@@xx1590 Thank you very much!
I am also a dedicated modeller (since too many years I am scratchbuilding a British -74 from 1811). I also enjoyed buildng Hellerś 1:100 scale HMS Victory and the Soleil Royal. Your ambitious documentation of every step (jncluding preparation) is so inspiring! For the moment I am following your project USS Confederacy and waiting for #10. In due time I hope to pick up your way of making the deadeyes for my -74 (in scale 1:44!). Thanks for an astonishing show!
Thank you very much!
But for now, I am busy with the restoration of the frigate and CONFEDERACY took a place on the shelf, waiting for me to return to her...
My current project is my first ship with two layers of hull planking. This video has been a great help. I like your work..
Thank you very much!
Glad it was helpful!
I am a stair builder by trade and recently got into a trucking career and wanted to find a craft that would be pleasing to the eye and challenging as well. When I came across your ship building on RUclips. I was astonished at your skill level! I now purchased 9 wooden ship models 1/50 scale. I am acquiring the necessary tools to begin , what I hope , will be stunning works of art that you magnificently do sooo well! I will be watching your RUclips channels to hone my skills. Thanks for being an inspiration to me!
Thank you very much!
And your comment in turn inspires me to continue creating content!
Very good primer on joggles and stealers! Outstanding. Brava Olha!
Thank you!
Im a member in a small group where we meet one evening every week, to build model ships and gossip... Actually we spoke about you yesterday evening, and jokingly suggested we should invite you to one of our meetings... I think you would have been a great inspiration (and the only woman) to all of us... So if you are passing Sweden some day, please let me know... ;-)
Wow - Thank you!
In fact, I was very often in Sweden before the pandemic. My husband worked at the VASA museum and he still often comes to different parts of Sweden for various expert work...
So we’ll explained. No words required. Thank you!
You're welcome!
beautiful , OLHA !!
Thank you very much!
지금 만들고 있는 배가 아름답고, 그 열정이 아름답고, 그런 당신이란 사람이 가장 아름답습니다.
훌륭한 작품 잘 감상하고 갑니다. ^^
감사
Learning a lot from you thanks very much keep up the good work
Thanks, will do!
I just watched you making the clamps. I got so many kinds at home but this mehtod is so simple and so bright at the same time : using the planks themselves to adjust thickness... how could I not think of that? It's so enjoyable to witness a really great idea !
Thank you very much! I am glad that you have found useful information!
i see again you video. you are nr 1 you are the best
Thank you so much 😀
Ohla can you delve deeper into the ways you came about your planking calculations and how you used the calculator to find the tapers in the planks?
I wrote a more detailed article on my blog. Link in the description under the video...
Very tidy work ,a pleasure to watch.
Thank you!
Always a pleasure to watch. Thankyou :)
My pleasure!
guau....¡¡¡¡ , thank you very much
Welcome!
Bravo what précision, a Professional job.
Merci!
Great job. I really enjoy your videos. Thanks from Orlando Florida
Thank you very much!
Glad you like them!
1111 , that`s me ! ;-)
Perfect Job .
wow this is beautiful work unreal keep it up
I have been a scale modeler for almost 50 years, and while I've never built a wooden ship model, I can appreciate the workmanship required. You do beautiful work. I would love to see more ladies in this hobby. I hope you are an inspiration to them. You have earned my subscription. 👍
Thank you very much!
It is very nice to hear such a comment from a person who has 5 times bigger experience than mine in the modeling hobby.
Excellent!! Really excellent!
Many thanks!
That is some nice work and some Ideas i will have to use for my next build...
Thank you!
I am glad it was helpful.
Olha, admirável o seu trabalho. Belíssimo!
Destaco desta vez o fundo musical : suave e agradável.
Grato
Obrigado!
Something about this video in particular thinks that maybe making this ship isn’t an activity to complete in an afternoon while watching an episode of Hornblower.
Be honest! Each of my videos is filmed within 1-2 weeks on average. Each plank should dry for at least 10-12 hours, that's why I work on several models at the same time. While the glue dries on one - I take the other in my hands...
Я таким методом расчета планок тоже пользовался. Но на более крупном корпусе и без черновой. Но из-за ошибок округления и неточности изготовления планок, я пересчитывал через каждые n планок. Так удалось избежать укороченных рядов. И не пользовался паяльником, а кипятил планку, крепил её сырую на место без клея, она высыхала и уже позже клеил. Долго конечно, но получались такие замысловатые изгибы. Просто так паяльником не изогнешь.
Точно ето не бЬІстрЬІй процесс. Как раз тот случай когда "Тише едешь - дальше будеш". Обшивка на корпусе ето одна из его красивейших деталей и тут надо посидеть подольше)))
Благодарю за мастеркласс, это лучшая работа, что я видел! Теперь мне понятнее и разметка и потеряи...Один только пока вопрос, в каких случаях начинать снизу от киля, а в каких сверху от палубы.
Cпасибо!
На моделе вообще не важно от куда начинать обшивать. Ето на настоящих кораблях начинали со шпунтового пояса от киля, но на моделе по завершению никто и не увидит разници если вЬІ сделаете обшивку от бархоутов. Разве что вариант с клинкерной обшивкой - там технология такая что надо начинать только от киля...
@@OlhaBatchvarov Благодарю Вас за внимание и ясный ответ, Вы для меня Гуру! Вы вдохновляете многих людей своим мастерством! Счастья, Любви, Здоровья Вам и творческих Успехов!
I'm about to do a 2nd planking for the first time on my USS Constitution. This could not have been better timed! Thank you so much, very helpful
Do you have photos? I would love to see what you’ve done!
My pleasure!
Great method to keep the planks in place without pins or nails on the planks. What an idea! Bravo!
Thank you!
Glad you liked it!
As usual fascinating to watch but I'm unsure where how you generated the diagram to determine the max and minimum lengths. was this from a direct measurement of the hull? love your work by the way all your ships are so pretty
Thank you very much!
This is the scheme by which +/- ships are formed. The midship frame can be moved to the bow or stern, depending on the type of the ship, but will remain in the central part of the keel. So is the shortest frame but it will be there!
@@OlhaBatchvarov 10 hours? Why you need to wait so long? Usually I'm waiting for 1 or 2 hours and the planks are holding pretty good. Maybe you're waiting 10 HOURS (!!!) for glue to clearly dry it?
I also use white glue
Вітання з батьківщини!
@@theduffman5573 The manufacturer writes that the clamps can be removed after 20 minutes, but still completely dry in 24 hours. So I want to be on the safe side and hold them for 10-12 hours.
Hello Olha 😊
I have a technical question? ✨ How much time do you spend on average per week
assembling the model? 👍 On average, similar models take an average
of 2,500-3,200 hours. 👏 It is known that you certainly have other duties and normal
everyday life in the family, hence my curiosity ✔😃 Warm greetings from Berlin 🎁
Thank you very much!
Thank you very much!
I'm glad you liked it!
I write in my diary how much time I spend on each stage of model building. To then sum up. But I don't have the same amount of time every day. I can work from minutes to hours on the model. Since I spend even more time editing videos and correspondence - I try not to miss a single comment!)))
BYE OHLA,DEDIKIT FOR THE MODEL,IS YOUR MODEL THE PEOPLE,UCRAINE,THANK YOU BY LEO ( ITA).SORRY IS PERMESSION.MY SCUSE.🍀🍀🍀🍀🤞🤞🤞🤞☮️☮️
Superbe travail ! Very nice job ! Greetings from France & Slavia Ukrainia !
I've watched this several times, and I'll watch it again before planking my next project. I'm so glad to have your videos to guide me!
Thank you!
I'm so glad to hear that these videos have come in handy!
I like how you turn the music down so we can hear the tap-tap-tap-tap-tap of the hammer. I know. Weird. 😑
Оля, чудова робота!!!як завжди на висоті!!! Насолоджуюсь переглядом 😍 Дякую і бажаю успіху!!!
Щиро дякую!
Absolutely stunning. This is so masterfully done!
Thank you so much!
I am learning so mush from you. What glue do you use and how long does it take to dry?
I'm glad to hear it! I use PVA which I clamp for at least 10-12 hours...
@@OlhaBatchvarov Does that not make planking very slow? thanks for your reply.
always inspiring... never built a wooden boat before but i really want to try a simple one after seeing you, thanks a lot
Wow - Thank you!
You will enjoy it!
I hit the like button and tell any one who will listen about your channel and great work. Do you offer anything with your name and a ship on it if so where can I find it?
Thank you very much!
There is a link to my website in the description below the video. There you can find all the information!
I’m a retired wooden boat shipwright, I realize this is a model and might even be a kit but the lines of the planking are not the way they did it, or do it. If anyone is interested on how it should be laid out to make it look real, just contact me.
WOW! And what kind of boats did you build?
@@OlhaBatchvarov mostly rebuilt old schooners. There are still a fair amount of us left but finding people with the money and willingness to keep a wooden boat going is getting less. There are a lot of enthusiasts but they are more into the theoretical aspects of it. I was surprised that the models strayed so far from how they were actually built.
I really enjoy your builds, very calming and very informative. Keep doing what you're doing. Its great.
Like a few others Im still confused on your planking calculations. I have read your blog, but it doesnt explain how you come up with your numbers. I see you get the measurement in mm on the 4 areas (max, min, bow, stern). Then you divided the max by 4.2 (the width of the 10 planks) the 2 sections next to the max you divide the length by half (2.1), and the bow back to 4.2, why?
When making the tick strips you show using 3.6 for each tick at the bow... where did that number come from and how do you calculate for the other sections. Thank you so much for doing this. It really helps us beginners see the techniques that work and how to do them.
Let me try to simplify the explanation!
- First you need to count the number of planks on the largest frame (which is obviously the midship frame). That is, I divide the length of the frame by the width of my planks.
- All other frames will have the same number of planks, only narrowed. Therefore, I divide the length of the frames by the number of planks on the midship frame.
- The exception will be the bow and stern, depending on the design of the ship, you will have to drop the planks in the bow or add short ones in the stern...
Ольга браво. Отличный результат.
Планируете сборку по инструкции или выполнить доработки по рангоуту и такелажу по уму. При всем уважении к Амати в инструкции в этой части бренд. При этом есть кране подробная анатомия.
П.с. у Амати огромная ошибка по корпусу по сравнению с реальной теорией. Я на своей модели сделал рангоут из расчета 1:64 хотя исходя из длины корпуса тут ближе 1:50. Чертежи рантгоута могу вам прислать.
Спасибо большое!
Мне самой интерестно поколупать набор!
Я уже начала с корпуса дорабатЬІвать. Рангоут Амати даже не смотрела они упрощают до уровня ниже плинтуса что б каждЬІЙ ребенок мог построить. По етому и корпус тоже хромает.
Я вооружилась 4 томами Девида Антчерла SWAN CLASS SLOOPS 1767 - он разжевал все до таких мелочей что грех не апгрейдить набор до состояния приличной модели))) Я собираюсь шить паруса тоже!
@@OlhaBatchvarov на этот четырех томник и основывался, паруса тоже поставил размеры из книги брать на прямую нельзя из за Амати.
На канал подписался буду с удовольствием следить.
П.с. у Шевелёва есть возможность заказать стволы в замен (литьевевые формы у него уже есть). Ещё момент медь чем-то покрыта, и это покрытие пожалуй стоит удалить заранее, на модели запарился чистить, при контакте с ЦА покрытие размягчается и чернеет.
Hi there, I am just about to embark on the 2nd planking of my Cladercraft Granado and have watched this several times and read the blog. One question I still have is do you calculate the width of the planks right at the stem of the model or do you just run a line from the point the plank needs to start thinning through the plank width you calculated at the first orange tick line on the model and just let the width of the plank at the stem adjust accordingly? Also, is the waterline you mark on the sketch just an estimate of where it will be or do you measure it on the model and then transfer it to the plan? Thank you for the videos and continued inspiration! Jon
This is not a plan, but a scheme, so the waterline is tentatively drawn. I only count the number of planks on the middle frame, and the planks themselves will tell you the rest: where to start narrowing, etc., you just need to stick to the width you calculated on the rest of the frames and not narrow more or less than the calculated...
Happy New Year and all the best to your family! Wondering if the second planking here is from the Amati kit, or did you order it custom from mill? Thanks.
Happy New Year to you too!
These are the planks from the kit!
That is one gorgeous planking job. I love the way you chose the color pattern to match on both sides. It's almost a shame to cover most of it in copper. Great work!
Thank you so much!
Your skills are truly amazing 🎉 having just finished my first hull planking and finding it very hard. You make it look easy
Thanks so much 😊
Thanks so much for making an archane job much clearer. I am going to watch this process several more times before my first cut. It is so much work to achieve a beautiful result. Pleasee keep up the fine work!
Thank you very much!
Glad it was helpful!
Sorry but you should watch Chuck Passaros video here on plank bending first. Then learn how to taper the edges of the planks so they fit better together on thier long edges.
Exactly the same marking as in Chuck's video. I only use an electric bender instead of an iron - that's enough for this model! This is an example for beginners of how to do planking more accurate!
Wait for my planking on the Confederasy similar to his Winchelsea (by the way, this kit was developed by Chuck)!
That first layer of planking was just to provide a form for the second layer??? And neither will be seen when the copper goes on?
Yes - that's right!
Never miss an opportunity to practice!
Because here, if you make a mistake in the calculation, no one will see, but when you have to arrange the planking on a model with one layer of planks, you will no longer have the right to make a mistake and it will be good to have experience...
Amazing video, as always!
Olha, a question.
If I only want to make 1 layer of planking, how do I do to make the nail holes disappear, without losing the "wooden" finish of the hull????
I want to make a wooden hull, but If i use nail, holes will appear.... If I use some putty to hide it, I lose the "wooden" appearance.
And the kits I bought have no 2 layering... Don't want to spend more in buying more planks... hehehe
Any tips? thanks a lot!!!!! You're a big inspiration, thank you for the videos.
Thank you very much!
You can make a single-layer planking, but I warn you that it will be three times slower and ten times more difficult to do... You can glue the planks with a soldering iron or a small iron (for this, it is better to fill the spaces with linden or basswood wood, then the planks can be bent directly on the hull for using the same soldering iron). The second option is to make clamps, as in this video, but more reliable, because you can fasten them only on the frames...
@@OlhaBatchvarov Thank you for your time! Great tips. I will try the methods and see which goes better with the build.
Cheers!! Helped me a lot.
Che colla usi? Il pennellino con cui passi la colla non si secca? Grazie.
What glue do you use? Doesn't the brush you use to apply the glue dry out? Thank you
Preferisco la colla PVA. Nello specifico, su questo modello, non ricordo che tipo di colla fosse: dovrebbe essere nei sottotitoli del video!
Tengo il pennello in acqua finché non lo utilizzo, in modo che non si secchi.
I've been building scale models from paper for many years.
Wondering to try myself in sailship modelling. I found Your videos most informative and best tutorial so far. Very greatful You find time to shear Your experience with all of us!
Btw, why it is needed two layers of planking if everything will be covered in copper plates?
Thank you!
The first layer is to create a perfect surface. And the second is already the planks that will be visible (partially, even under the plates). Or modelers imitate copper plates from paper or simply paint with paint (metallic copper)...
@@OlhaBatchvarov
I see now. Thank You for explanation! 👍
Hi Olha, want to thank you for the videos you have done on ship building, but do have a question,. Have watched all your ship building videos, some three or four times, but do you have a video on doing the measuring and calculations on planking. Sorry not a math person here, but will keep watching videos on planking you have done on ships, (HMS Pegasus). Aagin thanks for all the great videos or have you done a book on ship modelers library that deals with planking and the measurement and calculations. Again thanks
David
Hello David
This is one of my most detailed videos about planking. The description has a link to my blog - where I further describe everything I do in this video. I will write this link in the next comment, if RUclips does not block it!
en.shipphotographer.com/post/hms-pegasus-1776-in-scale-1-64-workshop-on-examples-6
How many rows of planks are installed during a modeling session?
Thanks
1 row at least every 10-12 hours to dry the glue...
Lavoro stupendo, veramente tanti complimenti !!! Un unico appunto, potresti usare una musica di sottofondo un po' più allegra ? un cordiale saluto e buon modellismo.
Grazie!
Do you purposely alternate the shades of the planks, or is it just a random order?
You made a great point - yes, I deliberately sorted the planks from the kit. There were 3 shades: yellow, brown and gray...
@@OlhaBatchvarov looks beautiful. 👍
Thank you for sharing your beautiful work and great filming too 👌👍
Thank you!
How long do you wait for the glue to dry between planks? It must take a long time to plank a hull that size. Very nice work. 👍
Thank you!
For the hull - approximately 10-12 hours. The rest of the parts can be reduced to 3-4 hours...
I have watched this video three times and I still do not understand the process with drawing out the 2 sides of the hull, how you determine how many planks are needed, how you determine where the pieces of paper you make the "tick marks" are laid out, and how you determine where to put your reference lines on the hull. Did you learn these techniques from a book, from another builder or learn them yourself through trial and error?
You can find a detailed description of the process in my blog - a link in the description below the video. I will write it in the next comment, if RUclips does not block it!
www.shipphotographer.com/post/hms-pegasus-1776-in-scale-1-64-workshop-on-examples-1
Love all the videos. Would love to see a amati lady nelson beginner series
Thank you!
On that model, everything is the same - the only difference will be in the number of masts for rigging)))
I love watching you work!! So precise and meticulous. You inspired me a few months ago to start my first wooden ship model ever. I love this hobby!
Thank you!
I'm glad to hear it!
If you have any questions I will be happy to help!
I want to buy please
You can find a direct link to this kit in the description under the video!
Wonderful work and a great video about it. Topp!
Thank you very much!
Brilliant work, how long does the glue on each plamk take to dry? really like the clamp isea, I will be useing that so thanks
Thank you very much!
At least 10 hours of clamping and the planks will not go anywhere...
@@OlhaBatchvarov Thanks for the reply, waiting 10 hours makes the build rather slow, do you work on other projects at the same time?
Beautiful job, that planking shows off the ship's line so very well. How many planks can you lay in a day? I figure just a few as you need to wait for the glue to dry.
Thank you very much!
Yes, here I have to wait at least 10 hours for the glue to cure.
@@OlhaBatchvarov Thank you
Замечательное видео. Заканчиваю один борт, очень обрадовался, што все делал подобным образам, как и Вы. Правда, у меня все рейки в комлекте более темного цвета, и более однородные
Здорово!
У меня правда ету обшивку будет почти не видно под меднЬІми пластинами, но я просто хотела показать принцип!
Tan eik fai l am 22 years malaysia loph💌💬💤💞hi 2022💇💤😍💞
Thank you very much!
I wait at least 10 hours for the glue to dry. Therefore, no more than 2 planks per day))) But it's worth it!
Hello, super travail, bravo ! 👍👍👍👍👍
Thank you!
Amaizing Job! Seeing you working inspire me to begin right now!!! Thank you very much! Greetings from. Tlaquepaque Jalisco Mexico!!!
Awesome! Thank you!
I thought I was a skilled shipmodell builder, but watching your videos I learned so much. It will improve my next ship modell I want to build. Thank you very, very much.
I'm glad you like it!
Hello Olha. Do you make anything on a 1/87 scale? I find your work fascinating. I tried looking after subscribing but to date can not find any.
This is because my favorite scale is 1:48 like in museums, but I have a few models on a smaller scale. For example, HMS VICTORY in the scale of 1:84 or a model of the schooner Colombia in the bottle in the scale of 1: 640)))
Цветовая разнородность досок чистовой обшивки, это изьян набора или специально так сделали?
Я специально отсортировала светлие и темние планки. Что б потом под маслом они не сливались в монолит...
Я преклоняю колено... Есть чему у Вас поучиться. Я восхищен!!!
Большое спасибо!
Я рада, что вЬІ нашли тут полезную інформацію!
Nice.. I love your work.. from Malaysia
Thank you so much 😀
Olha, how many model do you work on at a time? You seem to either have several active right now, or you release videos at different times. Regardless, your work is beautiful! ;)
Thank you very much!
Yes, I have 4 models in the process at the same time! While the glue dries on one - I'm working on the other)))
Listening to the beautiful music is as relaxing as watching you work your magic Ohla , Thank you so very much for allowing us to follow this work of art :-)
My pleasure!
I'd love to see you build a 1/8th scale Riva Aquarama. Thanks for the vid I very much enjoyed it.
My pleasure. I'm glad you liked it.
But my passion is sailboats rather than powerboats.
It is unlikely that I choose this model of my choice for building...
Olha, do you plan a video on rigging? I’m trying to become more adept at notching. I’d love a verbal explanation on these steps
When I start rigging, I will shoot it in detail. I describe all the processes in subtitles (in English) so that viewers from different countries can use autotranslation...
I'm not looking at the ship, but at your beautiful hands! You have golden hands! Great job, thanks!
Thank you very much!
I haven’t watched your videos in a while. It’s a joy to see your technique improve considerably… very impressive.
Thank you!
Without ever making a ship I'm trying to understand the reason why you sometimes notch a plank into another one or use a shorter plank, is the issue the twisting of the plank not the bending ?
That's how it was on real ships because of the shape of the hull. Stealers to increase width at the stern and drop plank to reduce width at the stem.
Very nice. Thanks for the video.
Your videos are therapeutic 👁👄👁
Thank you very much!
This method of planking makes perfect sense. No need for tiney wedges at the end to fill the gaps. But the skill level required is amazing. Another master class.
Well done
Thank you very much!
This is an imitation of exactly the technology used to put planks on real ships!
Beautiful work. How long do you boil plank before changing their shape?
Thank you very much!
I immerse the planks in boiling water for 10-15...
Qu’elle belle maitrise de l’art de faire un coque encore appris quelque chose
Yake prekrasne volodinnya mystetstvom vyhotovlennya mushli, ale chohosʹ navchylosya
Merci!
It is really nice to see how you work in a methodical way and get such beautiful rsults. Keep up your lovely work. You are certainly an inspiration to other model shipbuilders.
Thank you so much!
Thanks to your videos I think I'm nearly ready to try planking my first ship. I'm really learning a lot watching these videos.
Glad to hear it!
Wow! Your prep work is outstanding! Great job!
Thank you very much!
Absolute brilliant workwomanship! (Pun intended)
Thanks!
Hi Olha... Planking and rigging I love doing the most. Great work Olha.
Me too. Thank you!
Boy, you sure make it look easy, which we know it's not! Beautiful job!!! 💯👋
Thanks so much 😊
Your technique is amazing! 👏👏 in every single little detail! I love it
Thank you so much!
Another great video! Question, how do you determine how much to remove from the planks to taper them?
Thank you!
To do this, I made a marking on the hull to get on each plank how much to cut!
I just posted a link in the community tab on the channel with all details in my blog. For explanation of what I'm doing in this video!
Love watching your beautiful hands creating such art. Thank you!
Thank you so much 😀
Das war viel Arbeit gezeigt in kurzer Zeit
Der Rumpf sieht sehr gut aus .
Ein kleines Kunstwerk für sich
Viele Grüsse bleiben Sie gesund
Alles Gute Frank
Vielen Dank!
good job, i have a question for you. With the first and second plank the stern could be thicker than the rudder post. How do you get the right size? Sanding the first plank layer?
Thank you very much!
I took into account the thickness at the stage of the first layer of planking. I sand them to the desired thickness, so that after the 2nd layer of planks I can get the same thickness as a stern post.
@@OlhaBatchvarov thank you, i tapered the false keel too, because i was worried about the thickness of the layers 🙂
Оля, здравствуйте! Кропотливая работа, отличный результат!
Олег Иванович, большое спасибо!
I see with pleasure !!....Super