Congrats ! My question , a bit weird , but could you film every step of building an engine ? Like every step? Thank you so much ! I appreciate so much! And I hope you're gonna do a record with your new engine !
Great to watch, not many like this for the 1.9pd, don’t stop, I’ve a Passat 2003 AVB engine, what’s all interchangeable for a pd engines... info info info, great job and much respect, thank you ❤️
I got my BHW head back with some new valves and I noticed the valves sit a little higher than the deck... do you machine, or grind them flush with the head?
@@HelderPutoPerformance thankyou really enjoy your videos i had a reputable company tell me it would not start and another tell me i would need to get it mapped straight away as would not be able to drive it as would overfuel do you know if the BRS 1.9 tdi suffer from conrod failure like the BLS and BXE you seem to know what your talking about
Hello I am from India and I have a skoda Laura 1.9 pd. I got a code p1267 control limit exceed injector 3. Now the car doing hunting on 1500 rpm. Please share me solution 🙏
Tugas a fazer o normal,a deixar os bifes de boca aberta,tenho 1j pd115 e adorava meter uma caixa dessas , quase vou a dormir a conduzir com essa caixa era sonecas cada vez que conduzia,adoro mesmo rolar estrada fora,good karma to all...
Awesome engine build
Thanks for sharing this video
Congrats !
My question , a bit weird , but could you film every step of building an engine ? Like every step? Thank you so much ! I appreciate so much! And I hope you're gonna do a record with your new engine !
19 tdi pd the bulletproof engine
Great to watch, not many like this for the 1.9pd, don’t stop, I’ve a Passat 2003 AVB engine, what’s all interchangeable for a pd engines... info info info, great job and much respect, thank you ❤️
Could you do a vid on timing the engine after the head is taken off sometime?, great videos
Respect bro very informative
Thanks for watching 😉
I got my BHW head back with some new valves and I noticed the valves sit a little higher than the deck... do you machine, or grind them flush with the head?
Do you have a video of setting the timing belt tensioner up please?
No but I weel do 1 son 😉
Bellissimo lavoro posso chiederi che tolleranza hai dato tra albero motore e bronzine..grazie..complimenti
Brilliant video ,
Question, what’s the best method to time up a brand new fully built engine ? Best thing to look for and how to do it properly
You just need tow turn the polys until they lined up
@@HelderPutoPerformance possible of a video on that?
👍👍👍
Hi, please tell me the number of ARP bolts for this engine
Great video thanks, very informative. Subbed for more!
Thanks
Is a new oil pump required or necessary when fitting a hybrid turbo 🤷♂️
No mate original pump it’s ok
Hi. I’m changing my BXE for an ARL. Can I use my BXE injectors and turbo in the ARL engine?
Yes you can
O teu inglês ta cada vez melhor, MAS
Quando disseste que havia uma crack in the coner parti-me a rir
Não se pode saber tudo 😂
Nice build mate
Good job keep doing
Dear friend hello from Greece 🇬🇷!i want to ask which engine code in your opinion is the best 1.9 tdi engine?the most reliable? thank you very much
ARL
I have avf.what about it?thank you for your response.
Boas, como fizeste o porting da culassa? Abraço, videos muito bons que tens aí.
if i put a pd150 turbo and pd150 injectors on a 1.9 tdi BRS engine will the engine start and will i be able to drive it until i can get it mapped
Yes mate
@@HelderPutoPerformance thankyou really enjoy your videos i had a reputable company tell me it would not start and another tell me i would need to get it mapped straight away as would not be able to drive it as would overfuel do you know if the BRS 1.9 tdi suffer from conrod failure like the BLS and BXE you seem to know what your talking about
Hi.
People in Poland doing those engines for 400bhp, usually for 1/4 mile racing.
Nice 👍
I like it. Good job 👌
olá Helder, qual a marca da arvore de cams que usas-te? obg
Boas as cams que eu usso são da veicomer
Question, are the pistons forged?
Hey man great work i notice you have a C class merc in there too do you work on many mercs ? Also that engine now looks great man ❤
Pensei que ia estar em português😔
Parabéns por a máquina!
Obrigado
Good job we usually do the same 😁
Post link where I can get that turbo kit cheers :)
Which oil do you use in your engine. Thanks
Castrol 5w30 c3
Can you please explain your engine break in process just finished mine and don't want to f**k it up. Thanks
Boas as bielas da maxpeedingrods são de boa qualidade? É plug and play ou tens de alterar o bloco
Boas nunca tive problemas e so montar nao a nada a alterar
Have you measured the Piston rings by your self? I need some information about piston rings specs to rebuild my pd130 engine with forged rods
would it be a good idea to go from 3 holed gasket to 2 holed for more compression or will there be problems? I have an asz engine
how much it cost you the parts and service for boring the cylinder head ect. Thx for the answers and your time
Hi what you mim by boring?
Hello you have quickshifter ?
You think it’s worth?
No I don’t have quickshifter I don’t know if worth the money they ask for
@@HelderPutoPerformance thank you 🙂
so nervous you were going to drop them bolts haha
🤗
Are your pistons forged?
No
How much for a build like this done by you ?
You want to do my vw bora tdi st . I'm running a pd 150 hybrid turbo . Side mount intercooler hard pipe kit .
Yes I can do it
@@HelderPutoPerformance yes my friend . Wen Christmas over we need to link up bro . Thanks . This is going to be cool
Just imagine your work on mine bro . Mine roughly 200 bhp and lots of tourqes. It's going to be mad . Who do you get to do your remap s .
@@benjourniee9285 skillaturbos
Can you do a video on how to find timing after taking head off thanks
New Record soon in Santapod😎
what compression ratio are you running? what 1/4 mile times and power figures are you hoping to make. 350hp?
1.9 tdi over 500bhp I ded before 10.1s 139mph
what kind of car is this tandem pump from?
yes , its a good question
Love the white on the block!! Did you do that yourself too?
Yes
Good job Mate. But seems to me you have bought everything except new stretch bolts and injector seals.. lol
Nothing better than the standard if not stretch
how the maxpeedingrods hold ?
don,t know i have on my car and never let me donw
helder os pernos da colaca pode ser mudado 1 a 1 ou e precio tirar fora
EU tiro sempre a cabaça fora
Can you please give the turbo model code specification
Hi gt2262vk skillaturbos
Can anybody tell me if I need to install new high lift valve springs with my 272 degree +9.8mm cam shaft? Thanks
You must ported the pistons ,like on this movie. I thing aprox a 1.5m maybe 2mm depper as stock
You can use 272 cam with completely stock engine, I would suggest Ina black
Helder metes sempre parafusos novos da arvore de cames, cambota e bielas ?
Nao
@@HelderPutoPerformance obrigado, é que refiz agora um pd130 e acabei por colocar parafusos todos novos
Hello I am from India and I have a skoda Laura 1.9 pd. I got a code p1267 control limit exceed injector 3. Now the car doing hunting on 1500 rpm. Please share me solution 🙏
Maybe wiring LOOM on the injetores
Ok thank you very much
Pd150?
PD130
What injectors are those?
Firad hf160
@@sylwester300hp4 thanks.
Hello my friend can you pm how much cost me send you engine build like this thanks.
És tuga não és?
Sim
@@HelderPutoPerformance bem me parecia pelo sotaque 😂😂 segui. Gostei dos vídeos. Abraço
@@ricardom8199 ja somos 2
Great video explanation, but music very agitating
What turbo is that?
SKILLATURBOS 2262vk
Someone told me PD heads shouldn’t be skimmed or are they talking rubbish. Anybody done it?
Talking rubbish
Hi what engine code is it? Asz,arl, bxe, Bkc ?
Arl
Arl
Como yt te deja tener el canal con ese nombre???
Don’t understand
give that turbo could do with it
who is egr
Tugas a fazer o normal,a deixar os bifes de boca aberta,tenho 1j pd115 e adorava meter uma caixa dessas , quase vou a dormir a conduzir com essa caixa era sonecas cada vez que conduzia,adoro mesmo rolar estrada fora,good karma to all...
You didn’t show the timing
Timing is same as normal engine
But need to know how to do it please make a video