Keep it under 500 hp that motor will pop or float the heads , make sure the transmission is tuned , turn up the pressure or you'll burn it up , and replace the drive shaft to a 1 piece
Those are some good numbers bro! Mine put down 442whp on my factory wheels and 418whp with the aftermarkets. I plan on getting it retuned after a few more mods, hopefully it’ll put down some good power
Get it!!!! Nice build. Obviously if getting upgrades for HP mpg will be low with a heavy foot. Curious to know when daily driving and not trying to race, you average mpg.
That’s hella impressive for the Pentastar! Nice choice with the Borla exhaust too haha. How much PSI are you running? What are the numbers you mentioned before looking at forged internals?
Hey man just came across your channel, great content keep up the great work I also have a SXT challenger and I am modding it at the moment so far I have a borla Catt back exhaust system and a mopar cold air intake also new tires all around with 275 in the rear and 245 in the front next I am looking to get the Ripp coil packs and the Ripp spark plugs then I will get the MMX 80mm throttle body along with the ported upper and lower intake manifold I think the last thing I will get since it’s the most expensive is the MMX forged pistons and rods kit along with the MMX crankshaft what do you think 🤔
I believe we got the same set up. I'm from Milwaukee an there is no place to get my v6 tuned so I'm trying to see if you want to sell that 475 to 510Hp tune.
And for cosmetic I would get the hellcat front end with hellcat splitter and maybe the wide body kit from dodge they now sell it through direct connection. Oh and get the hellcat or R/T hood along with a wicker bill rear spoiler and a rear diffuser
I’m definitely over 12k between performance and cosmetics because I’m chasing a number and a unique look and still in the process of adding more in the performance parts/support and more cosmetic stuff.
Pug upper and lower manifold, ripp coil pack, ripp 180 thermostat, ngk spark plugs, 80mm gpe throttle body, unorthodox crank pulley, ripp supercharger kit, ripp catch can and evil catch can and borla atak exhaust system rear seat delete running 285 in the back
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
It sounds incredible!!! Thanks for sharing
I fucks with the build heavy my guy! Way to represent the 6!
Definitely had to sub after I saw the hashtags 💯
Appreciate it
Keep it under 500 hp that motor will pop or float the heads , make sure the transmission is tuned , turn up the pressure or you'll burn it up , and replace the drive shaft to a 1 piece
This is awesome! I have a ralley redline sxt that I am slowly trying to build up like this!
nice, I'm watching you brother. Keep it up brother. This keeps me motivated.
Sleepy that nickname fits you well,lmao. Beautiful car, I just bought dodge charger 22. V6
Great runs mahn🔥🔥✅
very nice clean build
Those are some good numbers bro! Mine put down 442whp on my factory wheels and 418whp with the aftermarkets. I plan on getting it retuned after a few more mods, hopefully it’ll put down some good power
Oh you will v6 are awesome 😎 I’m not too far away from what I want to make in horsepower and tq goal 🥅. Just one mod and tune away.
Get it!!!! Nice build.
Obviously if getting upgrades for HP mpg will be low with a heavy foot. Curious to know when daily driving and not trying to race, you average mpg.
If you not driving hard on it. The most I got was 26 hwy mpg and 21 in the city after coming from North Carolina to South Carolina.
What’s your tire and rim setup? And do you hook from a dig with those tires?
What's the new top speed when adding a ripp super charger kit
155 mph
Hell yeah thats wats up!
That’s fast v6 challenger 💪🏼💪🏼
Where’d you get the paint job?
At a shop called slight line in Columbia SC
That’s hella impressive for the Pentastar! Nice choice with the Borla exhaust too haha.
How much PSI are you running? What are the numbers you mentioned before looking at forged internals?
10 psi. Looking at 454 whp and 375 tq before e85 gas and forged internal.
Hey man just came across your channel, great content keep up the great work I also have a SXT challenger and I am modding it at the moment so far I have a borla Catt back exhaust system and a mopar cold air intake also new tires all around with 275 in the rear and 245 in the front next I am looking to get the Ripp coil packs and the Ripp spark plugs then I will get the MMX 80mm throttle body along with the ported upper and lower intake manifold I think the last thing I will get since it’s the most expensive is the MMX forged pistons and rods kit along with the MMX crankshaft what do you think 🤔
To help sleepy out there a difference between HP and whp. I know someone in comments is not gonna understand the difference.
I believe we got the same set up. I'm from Milwaukee an there is no place to get my v6 tuned so I'm trying to see if you want to sell that 475 to 510Hp tune.
I don’t have a tuning file to sell the dyno/performance shop they just dialed it in that day. The first tune was done with a different shop.
What oil do you run now that it’s boosted ? Same one or different?
Synthetic 5w-30 in weather and 5w-40 in the summer
Wooow
Not sure if you’ve mentioned but pump gas or corn?
Pump gas
Gooooooooood damn!!!!
Nice! They tuned it while on the dyno right?
Yeah they tune it right there
And for cosmetic I would get the hellcat front end with hellcat splitter and maybe the wide body kit from dodge they now sell it through direct connection. Oh and get the hellcat or R/T hood along with a wicker bill rear spoiler and a rear diffuser
Wow 510hp ! what's next, rear gear change ?
A lot more Alternator Pulley, 3.07 gears ⚙️, death before stock pulley, planning to switch to e85 and get other supporting mods.
I want to do this to a awd challenger in the yellow jacket yellow. And have a professional wrap done where an angry anime girl wasp is on my car
How much money have you invested in mods on this Challenger?
I’m definitely over 12k between performance and cosmetics because I’m chasing a number and a unique look and still in the process of adding more in the performance parts/support and more cosmetic stuff.
Which national speed did you go to?
Wilmington NC
WTF! NO WAY A V6
Mr get up and go
What’s mods bro?
Pug upper and lower manifold, ripp coil pack, ripp 180 thermostat, ngk spark plugs, 80mm gpe throttle body, unorthodox crank pulley, ripp supercharger kit, ripp catch can and evil catch can and borla atak exhaust system rear seat delete running 285 in the back