Episode 14 1967 Pontiac GTO or GM A Body frame boxing & reinforcing the frame DIY style
HTML-код
- Опубликовано: 20 июл 2023
- Bestarc Plasma Cutter
Thisis the one I have:
www.amazon.com/bestarc-BTC500...
Here is the newer version they just launched:
amzn.to/3O5DFPu
Magnet angel finder
www.amazon.com/Johnson-Level-...
Warning
This video is made for entertainment purposes and not necessarily educational. it doesn’t mean to hurt any…and don’t take it seriously. I enjoy doing this, do what I do as your own risk.
Disclaimer
As an Amazon Associate I earn from qualifying purchases, I purchase all the products on my own or provide a link to a similar product I use. I do not get any freebies, I purchase everything just like you do. Anything I do earn goes right into my projects.
The information on this RUclips Channel is not intended or implied to be a substitute for Professional advice. All content including text, graphics, images, and information contained on or available through this channel is for general information purposes only.
This channel makes no representation and assumes no liability for the accuracy of information on or available through this channel, and such information is subject to change without notice.
You are encouraged to confirm any information obtained from or through this channel with other sources and review all information regarding anything shared in the videos. 
Авто/Мото
Nice work! Thanks for sharing
Thank for the positive comment and taking the time to comment. I appreciate it.
Very nice video and workmanship
Thank you!!
Thanks for this video! I have a 66 gto that I was considering buying the $800 kit for, but your video definitely showed how simple it is to do yourself.
Thanks for the feedback. Glad it will help you out. I was lucky enough to have some of the tools needed. Even if you had to buy them you now have shop tools for future projects.
Ive seen a pre-cut kit (two seperate and expensive kirs needed), but i like your method and appreciate the way you explain the process. Well done 👍
Thank you!! I looked at the kits and I’m always wanting to learn and do vs always buying something off the shelf.
I really like how you are laying your subframe connectors.
Thank you!
Great video..I want to do that to my 55 frame
Glad you’re able to apply what I did to your project. Thank you for watching and commenting
Thank you. I am going to reinforce my frame on my 03' Crown Vic. I know the frame is different but there are places where I can reinforced.
I honestly don’t know, I tried to google it and doesn’t seem like anyone does it, hard to tel but looks like the frame is already boxed in.
Great video nice work I do have a question I can see boxing the frame, and when you have a welded bracket on each side for the crossmember, if you were to tie a crossmember/ driveshaft loop just in front of the rear differential, why do we need the tubular bars I’m not seeing what that’s doing yet I see these kits that have them when you box. The frame isn’t that rigid enough .I guess what I’m trying to ask, is what do those tubular arms really do if you were too weld the brackets for the crossmember to each side where you boxed it Is that ties it from side to side especially once the transmission is bolted into the crossmember once again love the video. Great job.
It helps stiffen up the frame more, also the rear lower control arm mount can be a weak point when running high hp from what i understand. I guess that mount can rip out. So I tied my bar front to back into it to help reinforce it.
@@ShopDogFabrication Got Ya makes sense,never thought about that!! Thanks for the response!!
Where do you get cereal boxes?
Eating cereal, we have several recycle areas where you can take cardboard, I’m sure you could find similar boxes. Cracker boxes are the same.
thanks. I definitely don't like cereal that much. But the Boxes seem like a good idea for something like this