FLYWING Bell206 V3 scale RC helicopter First Flight Tutorial
HTML-код
- Опубликовано: 5 окт 2024
- Before leaving the factory, assembly, adjustment, and flight test were completed.
You just need to install the blade, check the flight site, and fully charge the battery to fly.
It can fly for 20 minutes.
Purchase link:
www.flywingrc....
Good tutorial this is on my shopping list.
Love your videos FLY WING! Any suggestions on how do remedy the wonderfully useless venting of the cockpit? I have drilled a grid of 1/4" holes in the see-through lower windows on the lower fuse. These are the windows just below the nose of the helicopter. The ridge vents near the top of the canopy were only half of the solution. Cheers!
My brand new uh-1 Huey has the death wobble. What’s the fix for this as I was going to purchase the bell 206 but not so sure unless I can resolve the death wobble on first helicopter made by flysky
Is the battery plug a XT60 plug? If not, what type of plug do I need to be looking for when I buy additional batteries?
❤❤❤thank you
Price and which motor is used mention kv
I’m a brand new rc helicopter pilot. I’ve owned fixed wings before. I have a FlyWing Bell 206 V3 and I for the life of my can’t completely get rid of a vibration on shutdown. It used to do it on spool up as well. I’ve adjusted the main blades many times and can’t seem to get it right although I’ve made it considerably better. Please help.
Für was ist der ganz rechte Schalter auf der Steuerung?
Hi, With one battery,how long it will stay in the aisr, please? Thanks for the information.
You can fly for at least 0:20 min. Even more.
Thanks
@@claudequirion8906 Thanks
Hi, Mine shakes before rotor is in full rotation and shakes again before rotor stops. How tight should I have the rotors attached?
Did you fix this issue mine is doing the same thing in hover off take off. I noticed blades are extremely tight to get to fit in place of other helis
Seem to have some give
Can I get one to do a review on please 😅I love the scale detail
I just got mine in the mail. Soon as I lifted off . It's like got a wobble to it. Kind of like turbulence with no wind. Iv
I've adjusted the blades but didn't help. Still wobbling . Can you tell me what may be causing this. It's kind of un expected for something that cost $1000 dollars and brand new
Balanced the blades?
can you fly it in GPS mode and switch to manual mode and switch back to GPS and so on while flying ?
yes
is this need to be assembled?
This helicopter does not require assembly
How far away can you fly in gps
1km