How to Paint Interior Trim Pieces
HTML-код
- Опубликовано: 28 май 2015
- In this video, I demonstrate how I paint my interior trim pieces to my car. I go through the entire procedure, from beginning to end.
Check out How to Removed my Door Panel and all of its components ▶︎ • Removing Components on...
PRODUCTS USED 🛠
3M 400 Grit Wet-or-Dry Sandpaper ▶︎ amzn.to/2cBe9kW
3” Random Orbital Polisher ▶︎ amzn.to/3kbvML3
3M Hookit 3” 320 Grit Sandpaper ▶︎ amzn.to/2depKbT
3M 3 Inch Interface Pad ▶︎ amzn.to/2dpvcoU
Grease and Wax Remover ▶︎ amzn.to/2cBdMXg
Duplicolor Grey Filler Primer ▶︎ amzn.to/2d75hRrDuplicolor
Sand-able Primer ▶︎ amzn.to/2drVsBJ
Duplicolor Enamel Red Paint ▶︎ amzn.to/2cBcLhT
Duplicolor Enamel Clear Coat ▶︎ amzn.to/2d76Hva
3M Trizact Hookit 3” 3000 Grit Foam Disc ▶︎ amzn.to/2drVr0P
Meguiars 3” Microfiber Cutting Disc ▶︎ amzn.to/2dpwJuX
Meguiars M105 Ultra Cut Compound ▶︎ amzn.to/2cV7jK3
Meguairs 3” Microfiber Finishing Disc ▶︎ amzn.to/2dpwd0d
Meguiars M205 Ultra Finishing Polish ▶︎ amzn.to/2cZvzXh
Meguairs M21 Mirror Glaze Sealant ▶︎ amzn.to/2dpv9sY
If you have any questions regarding the video, you know what to do. Thanks for watching!! :)
______________________________________________________________
Please give it a like 👍 and follow 👣
MILMAST MERCHANDISE ▶︎ www.cteecustoms.com/category/m...
milanmastracci RUclips Channel ▶︎ / milanmastracci
milanmastracci Facebook Page ▶︎ / milanmastracci
milmast Instagram ▶︎ / milmast
______________________________________________________________
Videos in the Outro 🎥
How to Install Aftermarket Headlights & Grill ▶︎ • How to Install Afterma...
PlastiDipping Wheels 4 Different Ways ▶︎ • DIY: PlastiDipping Whe...
______________________________________________________________ Авто/Мото
Thank you for this! I really want to re-do the interior details of my car and this was incredibly helpful.
Your videos are exellent. You stay on the subject and you dont waste time.
+Ronald Boutan Thanks Ronald :)
+milanmastracci Is that your real voice?
You sound like a 14 year old lmao
Just kidding
LOL Listen to me at the beginning of the video.. I sound WAYYY younger than 14 lol Don't ask me why ahah
+milanmastracci why ? Just kidding buddy, but hey.. It's kinda complicated, how much do u figure you'd charge to do it all ?
Thanks for the video. It was of great help when I painted the black plastic door handles in my car to match the body color. It was a long process, but the quality of the job was on par, or even better, than factory painting
Great job Milano. I did this on my dash and a few select pieces in yellow over gray in 2005, it is 14 years old. Still looks better than good. I may redo it because better products are avaiable today than 12 years ago. A quality paint, good color coordination, makes your vehicle uniquely yours, and I am 50 years older than you.
Thanks mine were silver and now black. black tahoe with black trim and leather. Looks great. Thanks to youtube and vids like yours I've done a ton of mechanical work
My love did this to his Charger, and it look so Amazing! Red is definitely a fun attractive color.
Why to do all this job for a phone charger?
Dude. I watched this for no reason at all. But you do great tutorials and the fact that you put all the links just made me subscribe to you. Keep going!
Painting's no fun if you dnt get high during the process
⚀⚂⚄🚗
BROOO I WAS LITERALLY DOING THAT BEFORE I HOPPED ON THE VIDEO LMAOOO
I'm high anyway
2K clearcoat will be permanently stuck inside your lungs, permanent lung damage. also it contains chemicals if you breathe too much in you literally will drop to the floor DEAD. is that the kind of high you wanted? high to the sky cause you're dead
High to the sky sounds like my type of high fo sho! 😎🤜🏼
This is a very good and well edited video you've made. Very clear and concise!! Excellent work. I feel confident in doing this now. 🙏🙏🙏
If 600 grit or equivalent scotchbrite is used, primer isn't needed to "fill grooves", just for paint adhesion. If the painti is scuffed instead of aggressively sanded, it can be repainted without priming using the same type of pain, just as you would co!orcsand an exterior finish beween coats. In this case, care must bde taken to limit overspraying the edges of the parts, as buildup may cause a tight fit and lead to chipping.
If sanded down to bare plastic, you have two other options. Duplicolor has spray paint specifically designed for painting plastic. Several companies make vinyl paints aka dyes to match a wide variety of interior auto finishes.
By far the best video I've seen on this topic, excellent job and thank you for this.
I really like the way your red trim looks with black, it's not too much it's just right. Beautiful job young man. I am proud of you !
Bro I love your positive energy..Do what you love, love what you do. Peace
One of the best DIY's I've seen on youtube. Information rich, clear, thorough and well presented. Great job. I look forward to seeing more videos of this quality.
+Jonathan Chung Thanks Jonathan for the nice works :)
@@milanmastracciis it best to get the paint with the gloss mix already or get the color and gloss separately
This video shows the right way to do things. Not cutting corners, LAYERS! Time well spent and the end result is what everyone looks for but a lot of people do not go that extra "bit" to get there. Great job, great video. Would love to know what your cost of materials is. Tools make a world of difference and the orbital makes the job MUCH easier but, I am more curious what the line up of chemicals cost. Obviously I can do the work to figure it out, didn't know if you may know off hand though.
Wow! A young man who is articulate and thorough! Well, well done young sir, WELL DONE!
Fuck off, boomer. NO ONE cares what your worthless generation of self absorbed half wit's thinks about them, or anything else, for that matter. Your praise means absolutely nothing, your criticism even less. Wanna know where you rank in all of that? Probably not, lol.
Am glad this comment section has a mature non profane audience. And car lovers too lol
a week later, you finally can move on to the next trim piece
One of the most thorough and excellent RUclipsrs to exist!
Wow! That's crazy man. Excellent work and great video. I just found your channel because I'm starting a project on an 05 Mini and your content is GOLD. I always thought you could just spray paint... haha, little did I know.
Excellent work!
+Stonnie Dennis Thanks :)
Hey bro you think you can do a full review/update of your car, you seriously have one of the nicest accords!
DUDEBAACKE Yeah sure thing!! :)
DUDEBAACKE ruclips.net/video/7yE8JSD_pFc/видео.html
To the point, crisp...great that you don't go on rambling like others out there. Keep up the good work!
This is awesome. I painted my car's center console but it got scratches really easily. You did a great job with the clear coat and polishing. I will be redoing my center console with your method. Thanks a lot for the video. I subscribed!
Angel Rivera Glad to hear!! Take your time and don't rush it, thats all I can say :)
Great job man, I could mistake this for a ChrisFix video!
What do you recommend for painting interior panels that have a surface texture to them?
Vinyl spray paint
Wow. Red looks excellent. Never thought this could be done. Will definitely try it in future.
Just bought a 2010 accord coupe LX-s as my "first" (first car was inherited) car and it's been only 2 days and I can't stop driving it I love it and I really want to do this with my trim but mines the sport blue that Honda uses
Thanks for the reply.
Can you do a diy on how to perfectly wrap the interior handle please? It would be appreciated!
Hey man Ik this is 5 years later but did you ever figure out how to take the door panels off lol
Will my Camry go faster if I follow this videos instructions ?
Miguel Angel Medina Rise sorry, this only works with Hondas
A7XinAfterlife unless he paints it black than it's an instant 15 hp
Absolutely, each piece you paint you gain 5+ Horse Power.
Clear coat adds an extra 50 HP but be careful, you may blow out your engine.
hahahaha you made my day
I've got a 1987 Fifth Avenue and am looking to paint the "wood" trim I think this video is really helpful
i didn't watch this video for the learning of how to do this, i saw this and thought oh boy lets see how bad of a job this guy does and i was proven wrong, you did a amazing job.
cody N Thanks man!! :D
+milanmastracci Good job indeed!
I literally did the same thing and he seriously did do an amazing job...
+TheYz250fmf same and i just came from b is for build so my hopes were not high for the youtube auto community and i was proven wrong
same haha!
This is the first video I've seen by you and I must say it is quite impressive. Good production, and you get straight to the point without any unnecessary waffle. I've subscribed and will have a look through what else you have already - thanks for the upload :)
+Cookeh Thanks buddy!! :) And thanks for the sub!!
Best video I've seen for painting interior plastics! Should make a video next on how to do the textured plastics on the interior, that would be really handy!
very clear and structured, no BS. Gives me the confidence to try mine. I want to put pin stripe or decal on mine as well. Any suggestions on technique, I'm thinking decal then clear coat. Even better if you could suggest a product to print my own image, I've been looking for a printable clear transfer type product, but still yet to find anything.
I have no plans on doing this. It came up in recommendations i got interested but after all that, theres no way i would ever do this lol. But great vid, im lost as to why put all the clear coat on just to sand it off but hey whatever floats your boat bro.
It is to make the panels 100% shiny and remove the orange peel that was created when spraying the panels.
Phly if you know anything about detailing, you would have known that. do you know what orange peel is? sanding levels out the peel, then to restore the shine, you buff it out
Josh H i know nothing of that and he already answerex my question. thanks for your input.... 😐
Nice video straight to the point. I've being planning doing this to my '11 Lancer.
How are you doing, brother? I appreciate the work you did on your panels. I just purchased a new truck for My Wife and I intend to do some of the interior the same way in red even though I had a busy idea of how to do things you sealed the deal for me thanks again.
Turned out really well!! I want to do my trim pieces but they're slightly textured. Was thinking if I used the aerosol filler DupliColor that it would serve to fill the voids and gloss out. Aside from that, I'm using the same products you are...minus the wax lol
Make sure you have your battery disconnected before you unplug the airbag connector, and leave it unhooked until it's plugged back in. Otherwise you get a code on your airbag system and it's a bitch to get reset and can normally only be done at the dealer
Ben Ward it would be just ur negative terminal right?
Yeah that's the best way to do it
Great video dude! You shot it very well and good job on the pj!
i never knew there were DIY vids on interior painting haha! I just gave er sheet in my 01 chevy it looks sweet i even added a cool logo thingy on my door panel
Your video is very helpful. Thanks.......I have to redo mine. I used rustoleum paint and the spray nozzle was terrible.
do a video on how to build a rocket please
Great video. You forgot to put your respirator mask.
Tom Dolic Safety first!
Looks great. Gives it a splash a color, but you didn't over do it. Well done.
Great vid and results using pressure packs, the only thing you forgot was plastic primer/adhesion promoter.
It's so funny how when you think "oh I'll just paint it"... $300 later.
+Abaddon Guecubu lmao and u put up with it
thornygravy
thornygravy
thornygravy
thornygravy more like 20 bucks
Spray ,dry, spray,dry,Spray ,dry, spray,dry,Spray ,dry, spray,dry,Spray ,dry, spray,dry. After 52 coats of a dozen cans. Go the extra 10 % and wet sand. :)
Mr Meguiar say: "Wax on, wax off" - never forget this important lesson!
Great vid, let me just make a couple of suggestions. If your plastic trim piece is flat it is ok to sand however if you have a textured piece like out of a fox body mustang don't sand it; you will ruin the texture. Also, when you de-grease your piece prepping for paint preparation consider wearing gloves to protect your hands and the piece from the oils in your hand that you are prepping.
Excellent video and tips, thank you! Appreciate the detail and products, can’t wait to get started now!
Hey just a tip, don't put the clean pieces in the same spot you sanded them, because they can have dust and ruin the paint later. So, sand them, clean them, and then put them on another diferent surface.
says to wear a mask... DOESN'T WEAR THE MASK.
Wahahahahaha
"do as i say not as i do"
Maybe wanted to catch a small buzz. Just sayn! LOL
Coronavirus in a nutshell
This aged well
Out of 30 videos this one is the best great job buddy
Really enjoyed the product shot and recap explanation at the end. Thank you!
This guy hit puberty like 30 seconds in
that's actually not the way to spray paint, you are suppose to spray in one go from edge to edge, not part by part and stop in the middle of the panel, it will look uneven.
k
thank you lol was thinking the same thing
And he was too close to the object he was spray painting
Your mom is uneven
I agree. I mean I'm not trying to give the man hell. He still managed to produce an excellent looking piece in the end, but I was cringing watching his spray pattern. All the same to each their own lol. Great looking piece.
Amazing video, very helpful. Can you also upload how you actually tool out parts of interior?
Awesome job man. You took your time to do it right. Props bud
"Without spending a dime at a shop"
In US English, 'shop' means a workshop like an automotive place, not shops for shopping, as in standard English. So while you won't have to pay anyone to do the work in a 'shop', you will need to spend a couple of hundred dollars at a 'store'.
@hermes trismegistus It apparently wasn't obvious to 2T, which is fair enough… it's startling what a media bubble the US is in. I've lived here for over 20 years, and I'm still find things most people don't realise are unique to the US.
Without having to spend a dime? Except on supplies 😂
right? The polisher alone is 100$
not much a car guy, but that interior looks sick! I respect that the red is not over done. Great video
+Joey Longo Thanks Joey :)
the most helpful video uve came across so far ready to paint the interior on my z4
+Isreal Diaz Glad you found it useful :)
put your resporator on practice what you preach
can I just pay u to do mine? 😕
+Manny Ya Bish If you want :) Send me an email at milanmastracci@gmail.com
+milanmastracci done!
+i2Hot4Tv he would've if I sent the parts
+milanmastracci Still have the same email? Might shoot you an email and get an estimate on mine if you still are doing trim pieces for people
Hit me up Cyrus!!
Great video and super helpful! Awesome job bro. Super great tips and descriptive in his detailed instruction.
Bro, you just helped me with everything I was looking for. Thank you, I am subscribed.
why are you using 2 primers? 1 is enough :P and you really didnt need that many coats of primer, its not a sandblasted car so 2 layers of primer would be enough. and also sand down the primer with a really fine wet sandpaper before spraying your collor :) and also dont do those small back and forth motions, do complete crossings over the whole peace, better results that way
All he had to do was wet sand , the lacquer that he put on, he did not have to go all the way back to the silver, he had an existing red match all ready , all he had to do was Sand back some of the locker with wet paper and then go right over with the better lacquer that he, wanted totally made a meal of it , and not everybody has the money to be paid for more primer more red paint and so forth! Or he could have triad tried to buff it up with the compound in the first place he might of got the result That he Wanted ?
Jason Wade I think the redoing of red was more to show how to do it, not to refinish it.
should change description to "how to paint your honda interior"
Very detailed explanation. Unlike any other. Good job man
Superb video my man!!
don't u think its actually easier to get your interior wrapped in any choice of your color rather than go through this awful thing??
not a hater ..love the mods you doing to your car ..but ...wrapping is easier yeah ?
Great work guy. Thank you for the tips. Weekend project here I come!! 😁👌🏽
You did a great job on this video, Milan!
Excellent video, great process, subbed!
Very precise explanation. Not sure if I can do as good as you demonstrated though.
Gotta say, your video hit every point. Excellent video, thanks.
That car used in the double clutch video sounds good, man! Beautiful sound
So satisfying when you take it all back with the sanding and cleaning. Almost didn’t want you to prime it
Pretty nice job young man and impressive number of views too. I'm debating on painting the plastic silver trim on my truck.
Nice video .. thanks a lot for that
What should you do to change gauges light and color to red to match the red paint in your interior trim pieces
Great video ...question why when my lacquer is on as my finiahed product i see what looks like pit holes under the paint and how long do i leave that lacquer to try its been 24 hours and it still feels wet ..i.e not hard
It looks really professional and from the factory. If I were to attempt this, removing the trim first would be a no go. I'd tape everything up really good, and spray inside the vehicle. Before anyone says how dumb that is, I never said it was a good idea, it's just how I would do it. 🤪
I like what you did bro ! I'm one of your subscriber since alomst 5 years now just from this video!! And I did the same for my Fiesta thanks a lot.
Happy to hear that John!! Thank you 👊
damn dude. the primer and filler sprayed and had such great coverage. that VHT paint has the worst spray tip pattern causing you to be hesitant when you applied the first coat. great video as always.
Looking......,
DUDE You are awesome! your videos are a really great help with simple DIY projects!
Aaron Enerio Thanks man!! I appreciate all the support I can get :)
thank you im getting a tiburon and want to try this. great explainer
Most informative video I've ever seen in my life , you my friend are a godsend ✌️👌
Glad to help! Thanks
You do nice work!
What was the different kind clear you used before that ended up not as good?
Really nice and clear video mate. I have a question, I used primer (grey) then silver metallic as a basecoat on a plastic then after drying I used clear coat but soon as I sprayed the clear coat the primer (grey) colour appears isn't that weird? What m I doing wrong here ? Appreciate your advice
can you tell please what soundtrack you used? thank you!
P.S. great job with panels!
It helps me soooo much having the same car as you! I love your videos man.
MrChris2Fur Thanks Chris :) Glad they help!!
Excellent description and quality job.
Your videos are sooo helpful bro!!
Your really good at what you do!! Enjoyed your videos
Wow that looks awesome, good job.
dood, you did a great job. i need help, its my first time doing this. the problem is i notice small nicks/dents on my grab handle, and stereo faceplate has hairline scratches from the sandpaper or wool i used to get the rubber coat off. i dont know if i should now use fillable/sandable primer, or use something like perfect plastic putty to fill in the problem areas...what do you think? thanks!!
hey bro, could u show how to take off the back part os the door handle? i took off the door bt i didnt know how to take off the panle
Love your work man. Well done.
If I'm going to wet sand by hand what grit sand paper should I use? 2000?