You can't argue with how well it turned out... I've been watching a lot of "paint tutorials" lately and he broke several of the cardinal rules of painting. Not blending the panel, and painting to the edge of a panel. Stopping his spray pattern in the middle of a panel. This just goes to show that you can do it your way-and still get excellent results. Thumbs up from me!
I like this job but I would like to ask after using p40 rough sandpaper , I haven't seen you using spot putty or filler for checking that close small pores
That red putty after the fiberglass filler, was that Bondo Spot Putty or some other kind of nitro 1K putty? Didn't see you using a hardener and looked very smooth and creamy in consistency.
Can someone help me, I accidentally used 80 grit to sand down to the very bottom of the paint. ( bare plastic material) theres many many visible scratches do i simply just sand it down again with with 220? I don't want to cause any more scratches
Sand the edge with 80 then 180 and sand the filler with a sandingblock not your handpalm (as you can see at 12.57) mix your paint in another cup then in your spraygun trough a filter for the dust you also have a lot of Orange surface
Très professionnel. Je suis peintre automobile et je suis vraiment intéressé par votre méthode pour plus de performance. Travailler avec vous si possible pour le recrutement
kalau cat barang plastik,lepastu bila siap bukak tape terkopek plak warna skali clear.macam mana cara baiki?guna plastik primer,warna,clear dekat barang plastik warna hitam mati
@@automotive.garage1710 .it depends on the spray condition and the type of clearcoat if there is no problem with thick orange peel it can be cut until smooth and flat..if you cut a lot using 1500/2000 it will remove many layers of clearcoat rays
Sentiasa teliti buat kerja..hasil padu puas hati..mantap boss👍
You can't argue with how well it turned out... I've been watching a lot of "paint tutorials" lately and he broke several of the cardinal rules of painting. Not blending the panel, and painting to the edge of a panel. Stopping his spray pattern in the middle of a panel. This just goes to show that you can do it your way-and still get excellent results. Thumbs up from me!
I will like to work with your company this is what I do for a living...nice job
NO 1 PAINTER !! IN RUclips !!! WORTH PAINT IN YOUR GARRAGE!!! THE BEST 5 STAR I GAVE U BRO!!!
Thank you..
What is your contact details bro
I want painting service for my car
😢😢😢😢😢😮😮😢😮😮😮😮😮@@twinzspraypaintteam9284
Hebat cara mu cat kereta! Cantik!!!
Sentiasa padu..twin yg cermat giler buat keje..mmg layan full time xde skip kalo cmni bang..👍👍
Terima kasih..🤜🤛
Another satisfied customer... keep up the good work!
Thank you..
Hi . Good job keep it up we learned a lot from you. waiting for the new one. 👍 🇸🇦
Thank you👍
Very good description thanks from Kenya
amazing, very detailed in repairing car paint, enthusiasm for work👍
Thank you..👍
Good job bro sheiiishhh for real . Nice trick you work smart hell yeaaa 🤘🏻🤘🏻
Sei un grandeee🗣🙌👍👍👍👍👍
I like this job but I would like to ask after using p40 rough sandpaper , I haven't seen you using spot putty or filler for checking that close small pores
Waoo. Cool man. Thanks for a good lesson. I love your work.
mantap workmanship
pulido gawa mo sir! parang orig talaga malinis walang alikabok.
Fantastic paint work. Love his painting skill.
Thank you very much!
Mantap om…👍👍👍. Step by step videonya jelas…
🤟🤟🤟🤟🤟🤟🤟🤟🤟🤟🤟🤟
🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿
🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿
Nice job! Process are clear 🙏
super 👍
Thank you👍
Видно профессионал своего дела 🌞🥰🥰🥰🥰Больше таких мастеров , а не рукожопов.👍
Шпаклёвка водой 🥺
This is one of the well detailed work..its a good job
Mantap..kerja ikhlas
Terima kasih👍
@@twinzspraypaintteam9284 sama2😊
Great job. Perfect
🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿
How you know?
Terbaik twin spray pain ....teringat masa zaman2 belajau giat mara
Terima kasih..👍
Very nice job,very nice colour
Thank you very much
Terbaik dan cantik hasi kerja ni..
Terima kasih..
Mantap betul bang👍👍👍
Bravo 😁😁😁👍👍👍
Parabéns show de bola já estou deixando like
Obrigado pelo like
Super finish bro........you are No 1 paint job on RUclips bro
Yep, he is the best I've seen. He's up there with The Gunman and Brian from Paint Society.........
That red putty after the fiberglass filler, was that Bondo Spot Putty or some other kind of nitro 1K putty? Didn't see you using a hardener and looked very smooth and creamy in consistency.
Terbaik..
Terima kasih👍
Why make a video like this but not mention anything about what you’re using.
He shows the product on the camera. And there’s also sub titles below.
terbaek be... 👍👍👍👍
Terima kasih..
Perfect ❤
اسلام وعلیک ❤
وعليكم السلام
Mantap mat ! Hari nie layan dua video abg adik 😜
Terima kasih.. melayan video² dri channel twin😄
ada abg adk ka
@@olalalalaaa3422 yup twin. SPRAY 2K TWIN AUTO 1 LAGI CHANNEL
Super bro ❤️ color coat clear coat time
Good job
Muito bom excelente ,(very good excellent)
Mpo vizur sana nmekubal maandaliz safi kwn hata mimi pia nifundi rangi zamagar
paling detail 👍
Please eagerly waiting for the feedback from you guys I am from Kenya
Excellent 👍👍👍
🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿
🤟🤟🤟🤟🤟🤟🤟🤟🤟🤟🤟
🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦🇿
Good job 👍
Thanks 👍
Can someone help me, I accidentally used 80 grit to sand down to the very bottom of the paint. ( bare plastic material)
theres many many visible scratches do i simply just sand it down again with with 220?
I don't want to cause any more scratches
Good
Thank you..
J'ame beaucoup cette travail
My congratulations brother ... I,m a Sri lankan Car Polisher....
Very good👍
good job
how long you wait on clear coat to buff it?
Voce sim eprofisional gostei muito legal
Mantap bang
Super excellent
Thank you very much
Nice work
Wow nice My brother am car sprayer in Ghana
Nice job
Gd job bro 👍 i m also a painter😀
Hii
Aaslam yalaikum bhai
Mai bhi penter hu
Prefect
Salam kenal ,nampaknya kerjaan orang Indonesia banget nih
Sand the edge with 80 then 180 and sand the filler with a sandingblock not your handpalm (as you can see at 12.57) mix your paint in another cup then in your spraygun trough a filter for the dust you also have a lot of Orange surface
By basecoat, you mean base coat primer?
Did you even sand the the clear before polishing?
Memang terbaiklah tuan.kalau axia warna putih base colour warna apa?
Klu warna putih x perlu base coat...trus spray warna
Very informative good job 👍👍
Thank you..
Super,
Très professionnel. Je suis peintre automobile et je suis vraiment intéressé par votre méthode pour plus de performance. Travailler avec vous si possible pour le recrutement
Salam..kalau cat guna spray gun elektrik blh tak boss?? Brand aikaa paint zoom?
Mantap bang, btw. Pemolesan awal itu pakai kain poles jenis apa sampai finising dan ukurannya ?
Шлифовка с водой??? Вай гакой год у вас там?
what is applied after clear coat to smoothening the surface? and which pad is used?
Tooooop
Two stage color base coat under clear coat touch up and blending kaise karte hain.. pura panel paint na karke?
Nice penting
Jenis body berlubang boleh la guna fiber tu lepas tu simen
Color send before polishing, otherwise no point. Other than that good job!
Hi! I like you job. Where are you from? I like your products I'm in California
Hii..thanks.. from malaysia🇲🇾
Great
Sukses ya
terbaiklah.. tumpang tnya bang, thinner campur warna basecot tu jenis/brand ape?
Terima kasih..thinner biasa T900 anchor
terima kasih bro @@twinzspraypaintteam9284
What is you applied first by finger
What are the tools you are using bro?
kalau cat barang plastik,lepastu bila siap bukak tape terkopek plak warna skali clear.macam mana cara baiki?guna plastik primer,warna,clear dekat barang plastik warna hitam mati
bang, boleh x nanti setiap video letakkan sekali size sand paper step by step senang untuk rujukan penonton² nak mempelajari ... T.kasih bang hehe 💕💕
Ok..bole nnti sy akan letakkan size k.pasir.terima kasih ats pendapat👍
@@twinzspraypaintteam9284 Terbaik bang, t.kasih semoga rezeki job x putus² masuk ,aaminn
Good painting
PERFECT !!! AFTER POLISHING THE ORANGE WAS REMOVED ?
yes exactly
which spray gun is this?
What colour cord
Did u not flat it down the clearcoat before u polish it? did u just polish over the lear coat with out flating down with 1500 or 2000?
no need to rub 1500/2000 if clearcoat is not a problem. unless there is a little dust that needs to be rubbed
@@twinzspraypaintteam9284 if u just lacker and polish it out with out flating will it be smooth?
Cause i paint car i never try or see before. I always flat and polish
@@automotive.garage1710 .it depends on the spray condition and the type of clearcoat if there is no problem with thick orange peel it can be cut until smooth and flat..if you cut a lot using 1500/2000 it will remove many layers of clearcoat rays
@@twinzspraypaintteam9284 good job Bro And thanks for replying
What brand of the paint you used?
What color is that. What shade of blue ? Thanks
Superb
Thank you...
bang..nk tnye..lepas cemin tu,,plus pakai berapa ribu..cntik npk
👌👷
Second channel ke bang ?
الله.ينور.عليك
Hi 👍👍👍
Hii..🤜🤛
Wow.. nice 👍👍👍 kedai paint kat mana boss apa Nama kedai u? I berminat nak paint kereta FD tempat u?
Salam abang.blh ajarkan x cara setting gun? Saya bru nk bljr mengecat🥺
Please can you remake this video and mention the things you used such as sand paper type and what you use to mix the paint and the rest?