Finished the 1970 major - new brushes as there were only tiny bits of the old, I can see that machine has been previously worked over as the two spring/screw fixing brackets were under the moving plate and there were many joined wires. I put the rotor in my drill and sanded the com smooth, fitted new brushes and resistor . The machine now works but I must lower the plate as it will not start immediatly , I have to move the switch towards number one. Thanks youtube for all the videos.
Thanks for that - was watching James May the reassembler on the Kenwood and it reminded me how much I wish I could respray the old Kenwood. You video held in knowing where to start disassembling it :) Cheers!!
Why does yours have ann extra capacitor ,mine does not have the green capacitor and it works, should they all have a silver capacitor and a green capacitor?
Hi Thomas, great video. One of the gears of my Kenwood chef 701 was broken and thanks to you video I was able to get to it. Now, i t looks like I need to lubricate all gears, do you know what kind of lubricant I should use ? thank you. DG
great video for the 701. I would note that it's possible to remove the motor without removing the hinge pin (so you don't have the hassle of forcing it back in, or risking the enamel with the hammer). remove the wiring from the motor base, then the covers can be removed, then the motor can be withdrawn from the base of the unit.
Fantastic video. Thank you! A question: My A701A is completely dead. Where do I start to find out what is broken inside the unit? No idea where to begin!!
Can you take it to a "repair cafe"? If not, first thing to check is the fuse. Then, does it make any noise at all, or is it totally dead? If it's totally dead then it could just be a problem with the cable, try replacing it.
Hi Thomas, Thank you for the video..very helpful :) I wondered if you might be able to advise me where I could find any online resourse to help me service my Kenwood chef A701A? I'm used to taking old Singer sewing machines apart but its my first Kenwood!! Thanks again for the video. Laura
Hey! fed video! jeg har en Kenwood der ligner din meget. Den larmer ret meget og det lyder som metal-gear der grinder mod hinanden, så tænker bare det skal have noget fedt - er det et godt sted at starte at smøre gearene med kw630879, eller er det andet jeg skal være obs på? tak!
Hello Sir, I therefore allowed myself to contact you because I have a Kenwood chef A701A and it has just broken down. When I press the blue button on the speed variator it starts normally at all speeds (constant increase in speed) and the more I turn it the faster it goes. Only when I put the sheet or the hook with a preparation inside it leaves timidly and stops immediately turning although the engine is still very audible. I think he no longer has the strength to train the accessories. I started to disassemble it because I was thinking of a problem with the strap on the top but it looks in good condition. Before dismantling everything, could you help me by giving me some tips on the breakdown. Hope you can help me thank you in advance. Cordially. C. Bernadat
OK. So now I see aKenwood which has the same electrical components as mine . However I think mine must be fromthe sixties I will have to bookmark this video. Yipee for the InternetNd youtube ! ! !
Thank you for your video. This helped me in refurbishing my A701A.
Finished the 1970 major - new brushes as there were only tiny bits of the old, I can see that machine has been previously worked over as the two spring/screw fixing brackets were under the moving plate and there were many joined wires. I put the rotor in my drill and sanded the com smooth, fitted new brushes and resistor . The machine now works but I must lower the plate as it will not start immediatly , I have to move the switch towards number one. Thanks youtube for all the videos.
Muchas gracias por brindarnos tu tiempo para poder ahorrar el nuestro te felicito
I used to work in an electrical shop in sheffield who had a Kenwood franchise. I well remember all these repairs.
I totally agree with your thinking. Squeeze as much juice as possible before discarding the lemon.
Que chevere justo que quiero renovar una, encontré este valioso video muchas gracias .
Una ñregunta la tapa de arriba de plastico q ya no esta cuando empieza a desarmar como se saca , a presion? Corredera?
Thanks for that - was watching James May the reassembler on the Kenwood and it reminded me how much I wish I could respray the old Kenwood. You video held in knowing where to start disassembling it :) Cheers!!
i love this play again and again --love the music !
please can you lead me to what track this is called ? totally love bengt ..first time i heard of him being a daft brit. wow sounds like i missed out.
polopippin Truddelutt - Bengt Hallberg
Why does yours have ann extra capacitor ,mine does not have the green capacitor and it works,
should they all have a silver capacitor and a green capacitor?
Hi Thomas,
great video. One of the gears of my Kenwood chef 701 was broken and thanks to you video I was able to get to it.
Now, i t looks like I need to lubricate all gears, do you know what kind of lubricant I should use ?
thank you.
DG
.....and by lubricant I meant grease :)
Dieter Grulich
Thank you, glad I could help. Try to google this number: kw630879
Dieter Grulich
Need to put Food grade grease in the gearbox. Hopefully you have already done it.
Hola tengo una Kenwood a701 y solo funciona la licuadora, cómo cambio de función?
Cuando le colocás la tapita donde va la licuadora funciona la parte planetaria de abajo
Me pasa exactamente lo mismo, será que está roto?
great video for the 701. I would note that it's possible to remove the motor without removing the hinge pin (so you don't have the hassle of forcing it back in, or risking the enamel with the hammer). remove the wiring from the motor base, then the covers can be removed, then the motor can be withdrawn from the base of the unit.
Hi Ben
thanks for the comment. Good idea, especially if you just need repairing the engine ;-)
Do the new ones have metal gears and metal gearbox case like this?
Fantastic video. Thank you!
A question:
My A701A is completely dead. Where do I start to find out what is broken inside the unit? No idea where to begin!!
Can you take it to a "repair cafe"? If not, first thing to check is the fuse. Then, does it make any noise at all, or is it totally dead? If it's totally dead then it could just be a problem with the cable, try replacing it.
@@321tryagain Thank you!
In case this helps anyone. I had the same issue and just needed to replace the cable. I found an online guide but it was very easy.
Hi Thomas, Thank you for the video..very helpful :) I wondered if you might be able to advise me where I could find any
online resourse to help me service my Kenwood chef A701A? I'm used to
taking old Singer sewing machines apart but its my first Kenwood!!
Thanks again for the video. Laura
Hi Laura
online resourse: Do you mean people who can help or spare parts for the Kenwood machine?
Thanks, one Kenwood Mixer stripped down, degreased and rebuilt
no way! im scared of disasembling so much ahah
Pl tell green clour capacitor m u f
Hey! fed video! jeg har en Kenwood der ligner din meget. Den larmer ret meget og det lyder som metal-gear der grinder mod hinanden, så tænker bare det skal have noget fedt - er det et godt sted at starte at smøre gearene med kw630879, eller er det andet jeg skal være obs på? tak!
hi Thomas please help me to assemble of the kenwood chef A701A
Hello Sir, I therefore allowed myself to contact you because I have a Kenwood chef A701A and it has just broken down. When I press the blue button on the speed variator it starts normally at all speeds (constant increase in speed) and the more I turn it the faster it goes. Only when I put the sheet or the hook with a preparation inside it leaves timidly and stops immediately turning although the engine is still very audible. I think he no longer has the strength to train the accessories. I started to disassemble it because I was thinking of a problem with the strap on the top but it looks in good condition. Before dismantling everything, could you help me by giving me some tips on the breakdown. Hope you can help me thank you in advance. Cordially. C. Bernadat
Quiero comunicarme con usted
Thanks a lot for this
godt håndelag min dreng.
OK. So now I see aKenwood which has the same electrical components as mine . However I think mine must be fromthe sixties I will have to bookmark this video. Yipee for the InternetNd youtube ! ! !
Just too quick to follow.