Honestly, i want to go to Indonesia just to see this guy and talk with him. If i ever will be in the Bandung area, i will visit this guy’s shop and chat with him. He seems like a really cool guy
as always a guide made to save consoles, thank you very much for your excellent work and for that kindness of wanting to help, a hug of affection for everything you do. God always be on your side
Hi, I was problematic for the whole day because I can't seem to update my CFW firmware from 11.0.1 to 16.0.0, and I had this error. I tried this and it doesn't work. What made it work, is that I reformatted my SD Card and use your HATS (latest). After doing that, I tried to update my firmware one by one. From 11.0.1 > 12.0.0 > 13.0.0 > until 16.0.0. Thank you so much for making that one, it's a life saver.
I have a problem in my 3DS CFW, after updating the system, my 3ds won't boot up, it is always blackscreen, i tried updating the Luma3ds and the godmode9 but still no responce. I noticed that when the sd card is unmount i can open the luma3ds and godmode menu, but when i suddenly mount the sd the system suddenly stopped working. I tried formatting my sd card and using other card but still same condition. I hope that you can help me with this problem. Thank you
I think ur sdcard is not formatted as fat32 Extract the u.pcloud.link/publink/show?code=XZCelYXZi4Sro6euSMjOMt185oTu90ORoAG7 to ur sdcard after formatting it as fat32
@@sthetixofficial I don't have any partitions on my switch. I have my emuMMC set up as file based. Edit: I guess it doesn't matter to much since my console still works fine. The only thing I find annoying is that after using the donor NAND, my Switch can no longer connect to my 5G networks.
I have a problem, when connecting the switch to the PC, with the eMMC RAW option, a window appears to format the device, and when choosing device in nandmanager, the legend "imput file/drive is not a valid NX Storage" appears, What I can do?
@@sthetixofficial I tried it and came to this tutorial, because when I enter at Tegra Explorer. When enter in browse emmc, the application freezes. any solution? help please 😭
Hello! After following this, I am unable to launch either stock sys and sys cfw, but can launch emummc... Is there a way back or did I broke my console? (I got the backup as said in the guide but the manager says that the file is read-only) EDIT: Forgot to mention than whenever I try to launch stock and sys cfw in both cases it gets stuck in the Nintendo Switch logo and doesn't proceeds from there
hi dude, my nintendo switch dont generate the prodkeys. It shows me the following message: "Unable to set crypto keyslots! Try launching payload differently or flash Spacecraft-NX if using a modchip. Couldn't set master_key_00." Can u help me? Can I use other nS to generate this keys ot]r must be this one?
is there anyway to restore my emunand prod info to my sysnand? my emunand serial is clean, but wiped my serial in ofw when I did your restore guide, is there anyway to back it up from atmosphere and restore it to sysnand?
@@sthetixofficial Is there any apps that I can use to grab it? I tried using Tegra explorer to dump it, but it’s not restoring. I’m wondering if there’s any specific method? Thank you so much for the reply I’m trying to get this fixed as fast as possible
Open the emunand partition or rawnand with the nxnandmanager, then u can see the prodinfo.bin.. Extract it then u can import it to the sysnand using the nxnandmanager too
I tried this to remove a ban from the pixel shop, sadly didn't work there must be a way? Did everything on the switch myself can't understand why it happened to be honest
I've followed your tutorial, but still I cant get rid the problem. Im on 15.0.1 fw. but when I downgraded back to 13.2.0 its back to normal. Btw my sysNand is on 15.0.1 too. Can U help me sir?
@@sthetixofficial no sir, i mean my emuNand is on 13.2.0, my sysNand is on 15.0.1. When I tried to update my emuNand to 15.0.1 i got that error 2105-0584. I tried this method but didnt work. The only solution I found is downgraded my emuNand back to 13.2.0 using SystemRestoreV3.te script.
Hi, gan switch v2 saya sebelumnya di sysnand dan emunand ver 13, setelah emunand update ver 17 dan update hats pack, muncul error 2105-0584 tidak bisa boot ke emunand (tapi bisa ke sysnand), saya coba solve dengan tutorial prodinfo ini, namun pada proses dumb emunand dengan lockpick selalu ada tulisan corrupt2 (tapi ada keys yang muncul), setelah sampai pada end tutorial dan reboot tetap tidak bisa boot ke emunand. Apakah ada solusi lainnya ya?
mesinnya seolah2 V2 tapi dia V1 yang zombie bukan? coba cek di hekate hw&fuses info. kalo emunand nya rusak, coba bikin ulang dari awal. Karena merubah cfw pack, gak akan merusak emunand yang sblmnya berjalan normal. gimana cara bikin emunandnya pada saat awal? apakah prodinfo emunandnya dihapus kah? harus tau dulu itu semua history nya gan. Gak semua tutorial bisa diikuti, jadi harus tau penyebabnya dulu.
@@sthetixofficial di hw&fuses SKU nya tertulis 83 - Icosa (Erista) - retail. Padahal Box merah HAC - 0001 (-01). mungkin betul salah satu zombie. Kalau itu betul memang kategori zombie, jadi apa yang sebaiknya dilakukan ya? Jadi history awalnya adalah emunand FW terupdate sementara HATS belum terupdate, apakah hal ini penyebabnya?
Mesinnya V1 yang dipasang RCM X86 tapi dijual seolah2 sebagai V2 karena toko yang sengaja memanipulasi dan mengelabui buyer. Cara untuk memperbaikinya adalah dengan prodinfo_gen, gak ada cara laen lagi. Coba hapus folder atmosphere dan bootloader dulu sblm mengikuti guide prodinfo_gen. separah2nya, ya bikin ulang emunand nya.
@@sthetixofficial Well noted really appreciate your information. Mungkin saya coba hapus cfw dulu dan reinstall cfw dari awal. Kalau ada link video tutorial which i should use boleh share gan, thanks
Hello Sthetix. I have a Switch with problems for booting up. I have followed a lot of tutorials, even reinjecting new data from a clean FW (with the prod.keys) but nothing. My BIS keys looks incomplete based on the tutorial (mine don't have the Tweak line) and trying to use HacDiskMount I can not edit HEx info (blank data there). I do not have ProdInfo data there and it looks my original backup has errors without having a GPT partition. I do not know what the support guy did to the console. How Can I force a complete injection from the fresh FW (created with EmmcHaccGen) to recover my Switch?
hi! @sthetix, i did what this said and now i get this error. A fatal error occurred when running Atmosphere. Program ID: 01000000000005 Error Desc: std::abort()called0xffe) Any help would be appreciated. This is on a previously bricked, then zombied, then bricked again switch.
HI. Can I use this method to generate a different prodinfo on my emunand. I've bought a switch which can't access the "shops" as it was already registered (ironically it still connects to nintendo). I know you can't unlink.... but can I generate a new console (nand)?
@@sthetixofficial I tried that and it didn't work. I think tinfoil uses a different method to identify consoles. I have one console which will connect to the shops and one won't. Can I use the nand/profinfo/keys from console 1 in console 2?
Honestly, i want to go to Indonesia just to see this guy and talk with him. If i ever will be in the Bandung area, i will visit this guy’s shop and chat with him. He seems like a really cool guy
Thank you.
as always a guide made to save consoles, thank you very much for your excellent work and for that kindness of wanting to help, a hug of affection for everything you do. God always be on your side
Thank you
Thank you bro. Since i found your channel life have been easier.
Very helpful I'm going to bookmark this video if I needed it in the near future cheer ! 😀
You save me two times, I think I’m in love with you now, thanks for making this videos!
you are welcome
Hi, I was problematic for the whole day because I can't seem to update my CFW firmware from 11.0.1 to 16.0.0, and I had this error. I tried this and it doesn't work. What made it work, is that I reformatted my SD Card and use your HATS (latest). After doing that, I tried to update my firmware one by one. From 11.0.1 > 12.0.0 > 13.0.0 > until 16.0.0. Thank you so much for making that one, it's a life saver.
Wah akhirnya dibuatin yg saya kemarin request. Thx sthetix, sudah banyak berjasa buat saya. Suksess terus
Sama2 gan
Amazing work man love you
Fantastic. Thank you as always.
god bless u, saved my life. i lov u
Thank you sir you helped me 😭♥️♥️
I have a problem in my 3DS CFW, after updating the system, my 3ds won't boot up, it is always blackscreen, i tried updating the Luma3ds and the godmode9 but still no responce. I noticed that when the sd card is unmount i can open the luma3ds and godmode menu, but when i suddenly mount the sd the system suddenly stopped working. I tried formatting my sd card and using other card but still same condition. I hope that you can help me with this problem. Thank you
I think ur sdcard is not formatted as fat32
Extract the u.pcloud.link/publink/show?code=XZCelYXZi4Sro6euSMjOMt185oTu90ORoAG7 to ur sdcard after formatting it as fat32
The very best, thank you so much! 🤟
What is the recommended way to update the firmware on donor nand consoles? daybreak->restore prodinfo like in this way or some other way?
Yes same thing.
3:59 When I import the file, I always get an "Input file/drive is not a valid NX Storage" error.
maybe you chose the wrong partition
@@sthetixofficial I don't have any partitions on my switch. I have my emuMMC set up as file based.
Edit: I guess it doesn't matter to much since my console still works fine. The only thing I find annoying is that after using the donor NAND, my Switch can no longer connect to my 5G networks.
You need to alter the router's 5ghz channel. You can see the guide on reddit
@@sthetixofficial it's just weird that I was able to connect to 5G networks just fine before I used the donor nand.
No it is nintendo did it by design.. Please find the guide on reddit
I have a problem, when connecting the switch to the PC, with the eMMC RAW option, a window appears to format the device, and when choosing device in nandmanager, the legend "imput file/drive is not a valid NX Storage" appears, What I can do?
I think your nand is damaged, try doing the level2 procedure
@@sthetixofficial I tried it and came to this tutorial, because when I enter at Tegra Explorer. When enter in browse emmc, the application freezes. any solution? help please 😭
hello, during the restoration of PRODINFO.enc it shows error message "an error occurred during copy"
I tried on another pc and it works perfectly
the best guy foe nintendo switch
Hello! After following this, I am unable to launch either stock sys and sys cfw, but can launch emummc... Is there a way back or did I broke my console? (I got the backup as said in the guide but the manager says that the file is read-only) EDIT: Forgot to mention than whenever I try to launch stock and sys cfw in both cases it gets stuck in the Nintendo Switch logo and doesn't proceeds from there
the guide should work on the sysmmc too. I've tried it .
your emummc is still on lower firmware i guess?
Agan mantab banget kontennya, ane traktir kopii yak, gmn ya gan tnp hars yg gamepad itu
gamepad apa ya
Yg buy me a coffee itu lho om, yg versi lokal aja g ada yak
Can u make a video on how to fix wifi card problem on 3ds. It gives error message when turning on wireless wifi
sorry maybe you need to replace the wifi chip inside the console.
Hello, is there any way to restore the serial if I lost the prod info incognito copy?
no
no
@@sthetixofficial understandable, have a good day.
Thanks for your video i try to update my switch and i got stoke 16.01 zumie screen all ways if not video i only can used version 12.0.1 thank you
Glad I could help
I have a console that I reactivated using the nand of another, it is on firmware 14, can I update and use this procedure?
you can
@@sthetixofficial hello! I updated my zombie console normally, and It is working correctly. Without using prodinfo_gen. It didn't give any error.
Dose factory reset fix the problem on Nintendo switch oled or a new sd card using a desktop
just copy your sd card content over. It should be fine.
Sysmmc works really good can I play games on it from eShop with out a problem It works great on sysmmc
Yes so I can play any game on sysmmc with out a problem
hi dude, my nintendo switch dont generate the prodkeys. It shows me the following message: "Unable to set crypto keyslots! Try launching payload differently or flash Spacecraft-NX if using a modchip. Couldn't set master_key_00." Can u help me? Can I use other nS to generate this keys ot]r must be this one?
maybe you need to flash your chip with the spacecraft-nx to get the keys from the console
is there anyway to restore my emunand prod info to my sysnand? my emunand serial is clean, but wiped my serial in ofw when I did your restore guide, is there anyway to back it up from atmosphere and restore it to sysnand?
U can restore it, get the prodinfo.bin and flash it using hekate or using the nxnandmanager
@@sthetixofficial Is there any apps that I can use to grab it? I tried using Tegra explorer to dump it, but it’s not restoring. I’m wondering if there’s any specific method? Thank you so much for the reply I’m trying to get this fixed as fast as possible
Open the emunand partition or rawnand with the nxnandmanager, then u can see the prodinfo.bin.. Extract it then u can import it to the sysnand using the nxnandmanager too
Nice
How do I fix sysmmc blue screen I click on factory reset and still shows blue screen on sysmmc
Try doing the level 1 unbrick guide.
Okay
I tried this to remove a ban from the pixel shop, sadly didn't work there must be a way? Did everything on the switch myself can't understand why it happened to be honest
well you need to ask them bro.
So I deleted mine and lost the file will this save my switch?
it does not.
I saw on github that adds supports 14.0.0 but i'm on 15.0.0. Can I use it?
You can use it for 15.0.x
kalau benerin via emunand bisa tpi gimana kalau benerin di sisi ofw
apakah emmc raw gpp itu langsung akses nand nintendo?
I've followed your tutorial, but still I cant get rid the problem. Im on 15.0.1 fw. but when I downgraded back to 13.2.0 its back to normal. Btw my sysNand is on 15.0.1 too. Can U help me sir?
Why do u want to downgrade?
@@sthetixofficial no sir, i mean my emuNand is on 13.2.0, my sysNand is on 15.0.1. When I tried to update my emuNand to 15.0.1 i got that error 2105-0584. I tried this method but didnt work. The only solution I found is downgraded my emuNand back to 13.2.0 using SystemRestoreV3.te script.
You need to update both worlds to the latest version
@@sthetixofficial which I cant do that on my emuNand bcoz of that error sir
Use my hats pack
First 🥇!
So, this guide is for switch that get crash when updating the cfw, correct?
correct and most of the time, it is caused by the outdated prodinfo (if you ever used a donor nand previously)
Gan, link Donor Prod info nya exceeded... minta tolong diupdate boleh...
drive.google.com/open?id=128Tg3M-lv-0d7NmWuyMNxz_Lri_v1ZHa&authuser=spazioforma%40gmail.com&usp=drive_fs
hallo, setelah saya pilih payload prodinfo_gen kok selalu blank screen, mati? mohon pencerahan gan
berkali2 saya repeat mulai awal selalu sama blank
coba ganti sd cardnya
Thank you so much
You are welcome
ini bisa di semua versi switch om? unpached bisa gak dengan cara ini? karna lupa dimana naro file backup prodinfo nya dulu setelah di incognito
bisa
Hi, gan switch v2 saya sebelumnya di sysnand dan emunand ver 13, setelah emunand update ver 17 dan update hats pack, muncul error 2105-0584 tidak bisa boot ke emunand (tapi bisa ke sysnand), saya coba solve dengan tutorial prodinfo ini, namun pada proses dumb emunand dengan lockpick selalu ada tulisan corrupt2 (tapi ada keys yang muncul), setelah sampai pada end tutorial dan reboot tetap tidak bisa boot ke emunand. Apakah ada solusi lainnya ya?
mesinnya seolah2 V2 tapi dia V1 yang zombie bukan?
coba cek di hekate hw&fuses info.
kalo emunand nya rusak, coba bikin ulang dari awal.
Karena merubah cfw pack, gak akan merusak emunand yang sblmnya berjalan normal.
gimana cara bikin emunandnya pada saat awal? apakah prodinfo emunandnya dihapus kah? harus tau dulu itu semua history nya gan. Gak semua tutorial bisa diikuti, jadi harus tau penyebabnya dulu.
@@sthetixofficial di hw&fuses SKU nya tertulis 83 - Icosa (Erista) - retail. Padahal Box merah HAC - 0001 (-01). mungkin betul salah satu zombie. Kalau itu betul memang kategori zombie, jadi apa yang sebaiknya dilakukan ya? Jadi history awalnya adalah emunand FW terupdate sementara HATS belum terupdate, apakah hal ini penyebabnya?
Mesinnya V1 yang dipasang RCM X86 tapi dijual seolah2 sebagai V2 karena toko yang sengaja memanipulasi dan mengelabui buyer. Cara untuk memperbaikinya adalah dengan prodinfo_gen, gak ada cara laen lagi. Coba hapus folder atmosphere dan bootloader dulu sblm mengikuti guide prodinfo_gen. separah2nya, ya bikin ulang emunand nya.
@@sthetixofficial Well noted really appreciate your information. Mungkin saya coba hapus cfw dulu dan reinstall cfw dari awal. Kalau ada link video tutorial which i should use boleh share gan, thanks
sysmmc jalan kan?
coba bikin ulang aja emummcnya.
how to setup the SD card from scratch, judul video nya
Se puede recuperar la nand original con este método?
Pleas write in English
@@sthetixofficial how can i restore nand original?
Do you have the original nand from the console? With the original prodinfo?
@@sthetixofficial no 😥, my console stayed on XAW00000000000
Of course. That is permanent unless u got the original prodinfo
Punyaku pas coba pk lockpick keyblob corrupt 😔
Kalo pake chip, chipnya harus di flash ke spacecraft dulu
@@sthetixofficial owalah ternyata harus di flash dulu, ok makasih gan 😁
saya gas saja tpi disisi emunand apakah gpp keyblob error
gpp kynya
How did you hack the switch lite? Hardmod?..
Yes hardmod
Boot ke CFW lancar setelah ikuti tutorial ini bang, tapi boot ke OFW gak bisa dan muncul kode yang sama. Itu masalahnya dmna ya bang?
harusnya gak masalah. coba cek lg
Can I unban a switch with that ?
No you cannot
Hello Sthetix. I have a Switch with problems for booting up. I have followed a lot of tutorials, even reinjecting new data from a clean FW (with the prod.keys) but nothing. My BIS keys looks incomplete based on the tutorial (mine don't have the Tweak line) and trying to use HacDiskMount I can not edit HEx info (blank data there). I do not have ProdInfo data there and it looks my original backup has errors without having a GPT partition. I do not know what the support guy did to the console.
How Can I force a complete injection from the fresh FW (created with EmmcHaccGen) to recover my Switch?
Have u tried to unbrick using a donor nand?
halo gan. apakah ini bisa untuk update firmware ke 15.0.0?
bisa
this is maybe they way, to unbann from PXXL shop ? :)
no maybe it wont
bisa pas bener.. gw baru kejadian wkwkwk
hi! @sthetix,
i did what this said and now i get this error.
A fatal error occurred when running Atmosphere.
Program ID: 01000000000005
Error Desc: std::abort()called0xffe)
Any help would be appreciated.
This is on a previously bricked, then zombied, then bricked again switch.
please do this guide and you should be able to revive the console
HI. Can I use this method to generate a different prodinfo on my emunand. I've bought a switch which can't access the "shops" as it was already registered (ironically it still connects to nintendo). I know you can't unlink.... but can I generate a new console (nand)?
why dont u just use the exosphere.ini inside the hats pack to automatically hides the console serial number on all cfw modes.. it has the same effect
@@sthetixofficial I tried that and it didn't work. I think tinfoil uses a different method to identify consoles.
I have one console which will connect to the shops and one won't. Can I use the nand/profinfo/keys from console 1 in console 2?
well, then i suggest dont use or rely on the tinfoil shops
*Fantastic* . _Thank_ you as always.