Man you have no idea how panicked I've been for the last half an hour... This video is amazing and solved what I thought was the end for my switch instantly, thankyou so much!
happened to me with 17.0.1. At the time sysmmc wouldn't work so I ended up recovering from a backup, did another wipe due to custom apps, redid my backup, and now it's good. Thank you for this video!
You are amazing! I've been fighting with this for over a week now and I was just about to give up! I tried following other tutorials but none of them worked until this one! I want to cry! Thank you so much!
This content is useful and heplful ,i personaly unbreak my nintendo after a system wipe ,and niw i discover this methode witch will help me in the future .tnx great job.continue
I got this problem two months ago when upgrding my old 128gb microsd to 512gb and cleaning my dirty sysmmc, i didn't panick and load sysmmc as shown in the video.. it worked well till now..
great tutorial. I have followed it and now I am back to stock OFW. Quick question am I now safe to turn on/off the console without need to boot into hekate? For example could I delete all the atmosphere/hekate/bootloader etc files and folders now?
I'm sorry for bothering you but i kinda don't get it i'm still nee to modding community, so you wipe your system to enter eshop safely, but i watched a video about modding a switch lite and what he did was blocking nintendo servers with the a .txt file and installed all the games on emunand and when he want to play online or doing something on the eshop just go and remove the .txt file and go to the ofw and thats it i tried it before but didn't get bann and i'm not fully sure about it so if you're kind enough could you explain
you can read the how to use the console wisely on my github page, github.com/sthetix/HATS In short : OFW / Semi-OFW and the SysMMC CFW is for legit games only emuMMC - for "other" things
Firstly, I want to thank you very much for what you do for the Switch community, you managed to save my OFW. But I had a problem with Album, Homebrews no longer appear for me, I can place the file alone or in another folder within /switch and nothing solves it, only the themes appear.
Hi I have done some step in the tutorial but I can't go further because Hekate doesn't seems to let me boot into the OFW the icon can't be selected and is darker
This seems to be my error. After 17.0.0 my Switch is stuck on the company logo then shuts down. I got thr hats pack and moved everything to the sd card. But when I launch atmosphere via hekate,, it gets stuck on the atmosphere logo then shuts down. Any ideas on what to do next?
BEFORE CARRYING OUT THIS PROCEDURE, JUST TRY TO START SYSMMC ON THE HEKATE, AFTER THE NINTENDO SWITCH LOGO APPEARS, TURN OFF THE DEVICE AND TRY TO START OFW.
Everything went well until running OFW at the end and booting gave me “an error has occurred.” i tried your level 3 unbrick guide before this one and now my serial is XAW1000… how do i restore my original serial. i have a backup
@@sthetixofficial how do i do this. i tried your unbricking the nsw level 1 and it didn’t work. when i run ofw i get the same message. when i launch atmosphere cfw i get the same message in the atmosphere screen. my serial is still reading XAW1000…
Hi! Touch screen on my NS doesnt work. I get to enter hekate but after Atmosphere logo I get black screen. Should I repair touch screen to make It work? Thanks for your great work!
Hey sthetix, A while ago. I had done a haku33 wipe on my v1 unpatched cfw switch, and it didnt end up letting me boot so I ended up getting a new switch and I wiped the sd card from my old switch and put it on the new switch. my question being, is that can I just use a new sd card with files from your HATs pack to follow these steps to fix my old switch?
I've had this issue since I updated my sysnand to 17.0 to play online. I have one question, is it safe to run atmosphere on OFW to apply the fix? Could I get banned from NSO? I have sysmodules installed on Atmosphere and I'm afraid I'll get banned if any traces of CFW are found on my sysnand and then I won't be able to play online.
Hello. I followed all the steps from your "system wipe" video and also from this video but when I tried to reboot from hekate the OFW option is greyed out. Only RCM and CANCEL is available. Also if I press LAUNCH on the hekate menu I have 3 options SYSMMC SEMI STOCK, SYSMMC CF and EMUMMC CFW. I wanted to run all stock or original firmware so I can play online games without getting banned. Do I need to install something like the OFW? Also the firmware showing was 17.0.1 but now its prompting me that SYSTEM UPDATE IS READY. Is SEMI STOCK safe to play online?
@@sthetixofficial Thanks for the reply. yeah I figured it out lol. Was hesitating but after some thorough searching it all went fine. My son is now playing online with Semi stock. Thanks for the video. Really helped especially since I haven't touched the Switch in a very long time
I had two NS with the same problem, one was resolved perfectly but the other continues doing the same thing, I wiped it again with tegraexplorer and it took around 90 minutes (so slow) to complete but it remained the same, only the Nintendo logo and then a black screen. In emummc it works perfectly, before the errors began in sysnand it threw error 2162-0002 which points to a physical problem with the M92T36 chip but I don't believe it since in emummc it works perfectly, also on Android. any suggestions? thank you
Hello. Every time when I try to do a system wipe it gives me the error "Save Dir Deletion Failed ". How do I fix the error and continue to do the process? Thanks.
I used Haku33 to wipe, but got a black screen with a flickering blue light at the home button. I came across your video and I held the power button for 12 seconds, and repressed the power button. I saw the Nintendo logo, but then the screen went black again. It won't let me back into hekate. (Maybe because I turned off AutoRCM, as was said in the Haku33 tutorial?) My console is an unpatched console. I tried getting into RCM mode to load the hekate payload again, but it won't get me into RCM (I used volume up + the power button). Can't seem to get into any CFW. The only response I get is when I hold the power button for 12 seconds and then repress it again. Then I just see the logo shortly. By now I have removed all the files from my SD and replaced it with the files from before I used Haku33, but still nothing getting anywhere. I want to completely remove all CFW to simply use the switch on the OFW because I keep getting all sorts of errors and I am done with trying to fix it every time. I really hope you have an idea on how I should continue.
@@sthetixofficialsorry, forgot to mention that. Of course I used the jig, and I have also downloaded your HATS pack. In one of your other videos you said to replace the atmosphere and the bootloader folders with your folders from the hats pack. Or should I put all of your folders onto my SD? By the way, the blue light at the home button is still flickering. Any other ideas?
Blue light at the home button has nothing to do with the unbricking thing, it is the bluetooth / network. if you send / inject the payload to the console even without the SD card (like hekate payload), the screen should show something.
i was wondering if you could help at all !! i was using haku33 and screen went black- ive tried holding the power button for 12 seconds like you said in the video, and i see the nintendo logo but it doesnt reboot back into hekate !! i dont know what to do !!
@@sthetixofficial my console isnt chipped, I just have an older model and have been using an SD card 😩 i guess my switch is just dead at this point ???
Hi, I have a issues after using haku33 when I turn on the console I have the Nintendo logo displayed and after a black screen I tried your tutorial but it doesn't work I still have the same problem! Can you help me please ?
@@sthetixofficial I followed the simulation on the video, doing a dump from sysnand and a systemwipe afterwards and that solved my problem I managed to start with ofw Thanks for helping ;)
Gettings from Greece. I have a big problem the last three days. My Switch crashed while playing and after that crashes on launch with error 2002-4373. It's the v1 unpatched model, softmodded, latest firmware and atmosphere. I tried with Ultra, HATS, eradicating, vanilla atmosphere, I deleted the exosphere file, I deleted contents file, I used a new sd card but the problem didn't solve. I don't know what else I can do. I use sysnand as my Switch is used and was already banned. I can't get neither ofw and I can't make factory reset. In a second after switch logo is shown it show a screen that says the error 2002-4373...
Your HATS pack didn’t work for me, I had to painstakingly put everything back, also my console doesn’t dump the nand keys, safe to say my console is now a zombie
I am modded yes. I ended up buying a brand new console from the hell that we call nintendo. However i do not want to give up on this console and i replaced the nand. After doing that it was finally recognised, however i replaced the nand with a mariko on an erista. Also when putting the old nand from the erista into the mariko it throws up nothing. How does one flash the correct pkg1?@@sthetixofficial
Hey man, sorry for the late reply. I ended up buying a new switch, however i didn't want to give up on it so i replaced the nand on and attempted to boot through hekate. However i was attempting to repair an erista with a mariko nand and i didnt have the correct pkg1it also didnt dump nand before and i guess thats because it didnt detect anything. So i now need a pkg1? any ideas?@@sthetixofficial
@@sthetixofficial Sorry just seeing your reply now. I had so many issues with my modchip. It's a picofly from AliExpress. The only solution was replacing the 240ohm dat0 resistor with a 1kohm resistor, and the cmd resistor with 100ohm. Doing that + a full nand restore has brought my switch back to life. It was all thanks to your tweet complaining about a customer's picofly. The responses led me to swapping out the resistors and it solved everything. Thank you!
I have a problem with an nswitch, when I turn it on it does not enter the operating system, only a warning appears that says "could not start the software" Do you have any solution for that problem? thank you so much!
I apologize in advance, this might be a bit long and it's entirely my own fault for not understanding about haku33 before; Chronology: I may have accidentally activated systemwipe haku33. When it was done, the system proceeded to the tegra display as in the video, then gave me two options, wipe console or wipe emunand only. Because I was a little panicked, I tried pressing the power button for 12 seconds to get back to the hekate, but it still returned to the display mentioned above. Maybe this is where I accidentally caused the system wipe to run and probably wiped my console. Somehow I was able to get back to Hekate by ejecting my sdcard and then insert it again, and then I got the problem where I couldn't enter the ofw/cfw system just like in the video. I've already tried to fix it just like in the video but it doesn't work on my switch. Mine is V2 Mariko. Thankfully it's still able to go into Hekate so hopefully I can do something to fix it 😢 Do you have any solution please? Thank you so much, I really appreciate your time.
hi, im getting the error: a fatal error occurred when running atmosphere. program id: 0100000000000005 error desc: std::abort() called (0xFFE) there is any way to solved? please help!!!
hello. I tried every process in your video but when i click to launch the SYSMMC CFW it shows the atmoshphere logo and fades to black with no sign of getting back to the home screen. Any way you can help me with this please. Im running on v 17.0.1
@@sthetixofficial basically after the black screen I’ve made an attempt to do a system wipe. After that I realised I can only access hekate and nothing else despite the numerous times trying to access daybreak via Home Screen. Turns out I might have plunged into a deeper hole than I thought. Apologies for the late response but that’s where I’m trying to fix at the moment. I followed your unbrick tutorials which has not fixed them ( v 1 ,2 and 3 )
I think you have screwed the console. the level 3 will wipe the console prodinfo. IF you have a working emummc, please dump it and restore it to your console.
I still have non functioning sysmmc. after following the steps. I geta, pkg2 decryption failed, pkg1/pkg2 mismatch or old hekate. message. I need help but i feel like so close to a fix.
@@sthetixofficial I saw your video about the guide. Did not do it yet. I got my switch in this condition. I will try using your guide, because when entering the emulated nand I am taken to Android, and on the original nand the console turns off.
hallo sthetix, punya saya OFW tapi ngebrick pas update FW, bingung cuma stuck di logo nintendo saja. Ini kenapa ya? kesalahan hardware atau software ya, cara memperbaikinya ke tuser atau bisa diperbaiki sendiri?
kalo gak di mod sblmnya, dan kondisinya demikian, keliatannya ada banyak faktor. emmc chip nya jebol atau kerusakan di bagian chip wifi. coba bawa ke teknisi
@@sthetixofficial sebenarnya masalahnya kompleks, sebelum ngebrick, switchnya pernah digunakan pakai cfw softmod, tapi karena overheat/kepanasan saya masukin kedalam tas keadaan layar di matikan, jadinya kena (tidak bisa membaca SDcard yg menyimpan data CFW), akhirnya saya bersihkan dengan menghapus/mengembalikan kepengaturan pabrik untuk saya jadikan OFW, setelah ke OFW lalu saya upgrade FW ke 17.0….., dan akhirnya kena brick. Kalau kasus seperti ini apakah juga kena di EMMC?
@@sthetixofficial bolehkah saya tau berapa harga perbaikan di sthetix jika device saya memang kena di emmc? Sebab device saya sudah tidak bisa masuk ke hekate lagi, karena kasus overheat yg mengakibatkan tidak bisa membaca sdcard, jika saya masukkan sdcard akan mental dan akan stuck di logo nintendo, setelah itu tidak bisa dimatikan, kecuali ditekan power lebih lama.
"A fatal error occurred when running Atmosphere. Program ID: 0100000000000005 Error Desc: std::abort() called (0xffe) Report saved to /atmosphere/fatal_errors/report_000000000ccad89.bin" Getting this error please help
![[How To] Install Tinfoil on your Switch](http://i.ytimg.com/vi/Is20nn37TJs/mqdefault.jpg)
Man you have no idea how panicked I've been for the last half an hour... This video is amazing and solved what I thought was the end for my switch instantly, thankyou so much!
You are welcome.
happened to me with 17.0.1. At the time sysmmc wouldn't work so I ended up recovering from a backup, did another wipe due to custom apps, redid my backup, and now it's good. Thank you for this video!
Good to hear
You are amazing! I've been fighting with this for over a week now and I was just about to give up! I tried following other tutorials but none of them worked until this one! I want to cry! Thank you so much!
You are welcome.
Man!! You’re the best ! Your videos had helped me so so much !!
Thank you !
you are welcome
Another great video by sthetix!
Thanks again!
This content is useful and heplful ,i personaly unbreak my nintendo after a system wipe ,and niw i discover this methode witch will help me in the future .tnx great job.continue
I got this problem two months ago when upgrding my old 128gb microsd to 512gb and cleaning my dirty sysmmc, i didn't panick and load sysmmc as shown in the video.. it worked well till now..
yes u r 100% best solve i am searching 100 video but i got solotion your chanel 100% solve my problem
i am happy
Man your the best!! Working for me!!!
Thank very much you saved me. 100%
you saved my day thanks
mantab bro jelas banget ! terimakasih
Makasih bro.
Good info to know just in case
THA K YOU SO MUCH!!!!!! YOU SAVED MY LIFE....
You are welcome.
great tutorial. I have followed it and now I am back to stock OFW. Quick question am I now safe to turn on/off the console without need to boot into hekate? For example could I delete all the atmosphere/hekate/bootloader etc files and folders now?
why do you want to delete the atmosphere etc , you dont want it anymore?
excelente informacion tu siempre con lo mejor is amazing thanks
You are welcome.
I'm sorry for bothering you but i kinda don't get it i'm still nee to modding community, so you wipe your system to enter eshop safely, but i watched a video about modding a switch lite and what he did was blocking nintendo servers with the a .txt file and installed all the games on emunand and when he want to play online or doing something on the eshop just go and remove the .txt file and go to the ofw and thats it i tried it before but didn't get bann and i'm not fully sure about it so if you're kind enough could you explain
you can read the how to use the console wisely on my github page, github.com/sthetix/HATS
In short :
OFW / Semi-OFW and the SysMMC CFW is for legit games only
emuMMC - for "other" things
@@sthetixofficial thanks man i appreciate that
Hey Bro, thanks for your tutorial, love from china~
you are welcome
Thankyou soooooo much ❤
is the system wipping takes too long? i try the copy paste method but not workign gonna try the wipping method too but it takes too long. thanks
Thank you for this information 👍
My pleasure
god video
OMG Thanks I love U
Muito obrigado muito bom você e o melhore de todos conseguir recuperar meu nintendo switch oled tava travando no segundo logo muito obrigado ❤❤❤❤
You are welcome.
@@sthetixofficial muito muito obrigado...
I did everything well and can boot into sysmmc but the OFW button is greyed out and unable to be pressed. Why?
perfect video thanx bro
Welcome 👍
THANK YOUUUUUUUUU!!!!! IT WORK 🎉🎉🎉🎉🎉🎉🎉🎉
THANKS!
You're welcome!
Firstly, I want to thank you very much for what you do for the Switch community, you managed to save my OFW. But I had a problem with Album, Homebrews no longer appear for me, I can place the file alone or in another folder within /switch and nothing solves it, only the themes appear.
try reformating the sdcard as fat32 and test it again
@@sthetixofficial I'll try, the problem is the large files to copy and paste, emuMMC for example, but I'll let you know if it works 🙏🏻
@@sthetixofficial same :/ without homebrews
@@sthetixofficial the new HAST i got a blue screen on boot on CFW, only works the 17.0.3, but without homebrews, my FW is 17.0.0
u need to download the latest one on t.me/HATSPACK/9
Thanks for the great tutorial like always.
Do you have a tutorial how to install Second Wind on Breath of the Wild Switch version?
No, sorry
Im back at the home screen and it says to delete the micro sd card data because it was used on another console what should I do?
just delete it
Hi I have done some step in the tutorial but I can't go further because Hekate doesn't seems to let me boot into the OFW the icon can't be selected and is darker
you need to disable the AutoRCM to enable the OFW option.
@@sthetixofficial so stupid and so simple....
I'm really sorry for bothering you and Thank you so much !
I think I have a broken switch.. when tegra explorer systemwipe shows up, everything just stops working. I can’t back out or hit the power button
just press and hold the power button and reboot
im getting error "save dir deletion failed" when trying systemswipe using tegra and cannot boot again to ofw
ignore aja gan.
This seems to be my error. After 17.0.0 my Switch is stuck on the company logo then shuts down. I got thr hats pack and moved everything to the sd card. But when I launch atmosphere via hekate,, it gets stuck on the atmosphere logo then shuts down. Any ideas on what to do next?
delete the old atmosphere bootloader config and try to relaunch the sysmmc
BEFORE CARRYING OUT THIS PROCEDURE, JUST TRY TO START SYSMMC ON THE HEKATE, AFTER THE NINTENDO SWITCH LOGO APPEARS, TURN OFF THE DEVICE AND TRY TO START OFW.
Everything went well until running OFW at the end and booting gave me “an error has occurred.” i tried your level 3 unbrick guide before this one and now my serial is XAW1000… how do i restore my original serial. i have a backup
You better restore your prodinfo with the one from your nand backup.
@@sthetixofficial how do i do this. i tried your unbricking the nsw level 1 and it didn’t work. when i run ofw i get the same message. when i launch atmosphere cfw i get the same message in the atmosphere screen. my serial is still reading XAW1000…
@@sthetixofficial i have my original profinfo.bin but the one on my switch is named with the generated prodinfo. how can i replace it
Hi! Touch screen on my NS doesnt work. I get to enter hekate but after Atmosphere logo I get black screen. Should I repair touch screen to make It work? Thanks for your great work!
Try to boot to OFW and see if the touch screen is working.
Hello, I did a system wipe and this fixed the black screen. However, I'm still getting error 2002-4686 - would you happen to know how to fix this?
Hey sthetix, A while ago. I had done a haku33 wipe on my v1 unpatched cfw switch, and it didnt end up letting me boot so I ended up getting a new switch and I wiped the sd card from my old switch and put it on the new switch. my question being, is that can I just use a new sd card with files from your HATs pack to follow these steps to fix my old switch?
you can.
I've had this issue since I updated my sysnand to 17.0 to play online. I have one question, is it safe to run atmosphere on OFW to apply the fix? Could I get banned from NSO? I have sysmodules installed on Atmosphere and I'm afraid I'll get banned if any traces of CFW are found on my sysnand and then I won't be able to play online.
just follow the video, it should be fine. running atmosphere won't get your console banned. do not listen to other people who said otherwise
What does the semi ofw mean on your hats pack? Greetings
you can read it on my hats pack description
Hello. I followed all the steps from your "system wipe" video and also from this video but when I tried to reboot from hekate the OFW option is greyed out. Only RCM and CANCEL is available. Also if I press LAUNCH on the hekate menu I have 3 options SYSMMC SEMI STOCK, SYSMMC CF and EMUMMC CFW. I wanted to run all stock or original firmware so I can play online games without getting banned. Do I need to install something like the OFW? Also the firmware showing was 17.0.1 but now its prompting me that SYSTEM UPDATE IS READY. Is SEMI STOCK safe to play online?
you need to turn off the AutoRCM inside hekate to be able to launch OFW. But Semi stock is close to OFW
@@sthetixofficial Thanks for the reply. yeah I figured it out lol. Was hesitating but after some thorough searching it all went fine. My son is now playing online with Semi stock. Thanks for the video. Really helped especially since I haven't touched the Switch in a very long time
I had two NS with the same problem, one was resolved perfectly but the other continues doing the same thing, I wiped it again with tegraexplorer and it took around 90 minutes (so slow) to complete but it remained the same, only the Nintendo logo and then a black screen. In emummc it works perfectly, before the errors began in sysnand it threw error 2162-0002 which points to a physical problem with the M92T36 chip but I don't believe it since in emummc it works perfectly, also on Android.
any suggestions? thank you
is the emmc chip damaged? we dont know.
So if we are on 18.0.0 the brick won't happen if we wipe tegra compared to 17.0.0. Great video and thank you !
it does the same thing.
Hi Can I play online with my bought carts on semi stock or should I stick to reboot > OFW what’s the difference between the 2?
you can..because the fuse count will always be updated if you update via ofw or daybreak. it only affects a v1 console with autorcm turned on
If my switch got banned before this update (around 1 year ago), can i still do it? And also does it delete all my games data? Thanks
Hello. Every time when I try to do a system wipe it gives me the error "Save Dir Deletion Failed ". How do I fix the error and continue to do the process? Thanks.
it is done. I mean, just ignore that message.
Hey how do I fix the error when it says NOFAT
you need to do the level2 unbrick guide.
I followed this Guide and sadly ended up bricking further my switch
I used Haku33 to wipe, but got a black screen with a flickering blue light at the home button. I came across your video and I held the power button for 12 seconds, and repressed the power button. I saw the Nintendo logo, but then the screen went black again. It won't let me back into hekate. (Maybe because I turned off AutoRCM, as was said in the Haku33 tutorial?)
My console is an unpatched console. I tried getting into RCM mode to load the hekate payload again, but it won't get me into RCM (I used volume up + the power button). Can't seem to get into any CFW. The only response I get is when I hold the power button for 12 seconds and then repress it again. Then I just see the logo shortly.
By now I have removed all the files from my SD and replaced it with the files from before I used Haku33, but still nothing getting anywhere.
I want to completely remove all CFW to simply use the switch on the OFW because I keep getting all sorts of errors and I am done with trying to fix it every time. I really hope you have an idea on how I should continue.
You need to use the RCM jig to get to the RCM mode and try to use my pack, codeberg.org/sthetix/HATS/releases
@@sthetixofficialsorry, forgot to mention that. Of course I used the jig, and I have also downloaded your HATS pack. In one of your other videos you said to replace the atmosphere and the bootloader folders with your folders from the hats pack. Or should I put all of your folders onto my SD?
By the way, the blue light at the home button is still flickering.
Any other ideas?
Blue light at the home button has nothing to do with the unbricking thing, it is the bluetooth / network.
if you send / inject the payload to the console even without the SD card (like hekate payload), the screen should show something.
i was wondering if you could help at all !! i was using haku33 and screen went black- ive tried holding the power button for 12 seconds like you said in the video, and i see the nintendo logo but it doesnt reboot back into hekate !! i dont know what to do !!
if your console is chipped, then maybe you need to retrain / reset your chip.
@@sthetixofficial my console isnt chipped, I just have an older model and have been using an SD card 😩 i guess my switch is just dead at this point ???
@@yumeghost you're having the same problem as mine.
@@aosora9931 Same problem here! Followed all the steps and still not working :(
Hi, I have a issues after using haku33 when I turn on the console I have the Nintendo logo displayed and after a black screen I tried your tutorial but it doesn't work I still have the same problem!
Can you help me please ?
Try using my pack, github.com/sthetix/HATS
@@sthetixofficial I used your pack and I still have the same problem, i have sysmmc semi stock , sysmmc cfw but the console only starts in emummc cfw
@@sthetixofficial I followed the simulation on the video, doing a dump from sysnand and a systemwipe afterwards and that solved my problem I managed to start with ofw
Thanks for helping ;)
mine is different it only boots on ofw not cfw can you help?
try using my pack, github.com/sthetix/HATS
Gettings from Greece. I have a big problem the last three days. My Switch crashed while playing and after that crashes on launch with error 2002-4373. It's the v1 unpatched model, softmodded, latest firmware and atmosphere. I tried with Ultra, HATS, eradicating, vanilla atmosphere, I deleted the exosphere file, I deleted contents file, I used a new sd card but the problem didn't solve. I don't know what else I can do. I use sysnand as my Switch is used and was already banned. I can't get neither ofw and I can't make factory reset. In a second after switch logo is shown it show a screen that says the error 2002-4373...
Have you tried repairing it using the level2 unbrick guide ?
I click reboot normally and now the switch doesn't turn on...
You need to check the fuse count as well.
How can i do it?
??
under Hekate check the hw and Fuses page
Rcm is not detected by tegra
Hats pack link is dead can you please help me
it is on t.me/HATSPACK
I dont have tegra explorer on my switch
You can try to download my pack, codeberg.org/sthetix/HATS/releases
Your HATS pack didn’t work for me, I had to painstakingly put everything back, also my console doesn’t dump the nand keys, safe to say my console is now a zombie
i dont know the status of your console . is your console modded ?
I am modded yes. I ended up buying a brand new console from the hell that we call nintendo. However i do not want to give up on this console and i replaced the nand. After doing that it was finally recognised, however i replaced the nand with a mariko on an erista. Also when putting the old nand from the erista into the mariko it throws up nothing. How does one flash the correct pkg1?@@sthetixofficial
Hey man, sorry for the late reply. I ended up buying a new switch, however i didn't want to give up on it so i replaced the nand on and attempted to boot through hekate. However i was attempting to repair an erista with a mariko nand and i didnt have the correct pkg1it also didnt dump nand before and i guess thats because it didnt detect anything. So i now need a pkg1? any ideas?@@sthetixofficial
This does work but my screen but after a rebooting to hekate a couple times I get the same issue again. I don’t know what’s causing the problem
did you do the systemwipe?
@@sthetixofficial no
redo the guide. if it doesn't work, try doing the level 1 unbrick guide
@@sthetixofficial slide the link please 🫡
ruclips.net/video/eMGpz_o4HGw/видео.html
My switch just hangs on "Deleting system saves"
force to close and check if it affects anything
@@sthetixofficial Sorry just seeing your reply now. I had so many issues with my modchip. It's a picofly from AliExpress. The only solution was replacing the 240ohm dat0 resistor with a 1kohm resistor, and the cmd resistor with 100ohm. Doing that + a full nand restore has brought my switch back to life.
It was all thanks to your tweet complaining about a customer's picofly. The responses led me to swapping out the resistors and it solved everything. Thank you!
I have a problem with an nswitch, when I turn it on it does not enter the operating system, only a warning appears that says "could not start the software" Do you have any solution for that problem? thank you so much!
is it modded?
@@sthetixofficial yes, it has rp2040 installed
I removed the chip to leave it in original mode and it also has the same problem
maybe you need to do the systemwipe method first, if it doesnt fix the issue, please do the level 1 or level 2 unbrick guide.
@@sthetixofficial thanks for your answer, i will try that
I did it just like the video but my switch still doesn't run (black screen) after I went to sysmmc cfw. Please help
what did you do previously?
I apologize in advance, this might be a bit long and it's entirely my own fault for not understanding about haku33 before;
Chronology:
I may have accidentally activated systemwipe haku33. When it was done, the system proceeded to the tegra display as in the video, then gave me two options, wipe console or wipe emunand only.
Because I was a little panicked, I tried pressing the power button for 12 seconds to get back to the hekate, but it still returned to the display mentioned above. Maybe this is where I accidentally caused the system wipe to run and probably wiped my console. Somehow I was able to get back to Hekate by ejecting my sdcard and then insert it again, and then I got the problem where I couldn't enter the ofw/cfw system just like in the video. I've already tried to fix it just like in the video but it doesn't work on my switch.
Mine is V2 Mariko. Thankfully it's still able to go into Hekate so hopefully I can do something to fix it 😢 Do you have any solution please?
Thank you so much, I really appreciate your time.
@aldimasarsa5860 try doing the Level1 or level2 unbrick guide
I tried lvl 1. Still not working, will try the lvl 2 later
hi, im getting the error: a fatal error occurred when running atmosphere.
program id: 0100000000000005
error desc: std::abort() called (0xFFE)
there is any way to solved? please help!!!
how did it happen and what did you do to the console? If you search on gbatemp, it has something to do with the power IC chip
@@sthetixofficial this happen after an atmosphere update
hello. I tried every process in your video but when i click to launch the SYSMMC CFW it shows the atmoshphere logo and fades to black with no sign of getting back to the home screen. Any way you can help me with this please. Im running on v 17.0.1
how did you brick it?
@@sthetixofficial basically after the black screen I’ve made an attempt to do a system wipe. After that I realised I can only access hekate and nothing else despite the numerous times trying to access daybreak via Home Screen. Turns out I might have plunged into a deeper hole than I thought. Apologies for the late response but that’s where I’m trying to fix at the moment. I followed your unbrick tutorials which has not fixed them ( v 1 ,2 and 3 )
I think you have screwed the console. the level 3 will wipe the console prodinfo. IF you have a working emummc, please dump it and restore it to your console.
VALEU. CONSEGUI RESOLVER O MEU
WOW this is INSANE it worket LMAOOOOOOO
Hey buddy I heard we can mod the switch lite screen to OLED I'm looking forward to see this mod in your videos ❤
I dont have the mod yet. Let's wait and see
How did everything get deleted from sysnand technically after doing this, they shouldn't be able to ban me, right?
yes it did the systemwipe
So this will fix my bricked switch, and I'll be able to get my old pokemon saves back?
it only unbrick if you have done the systemwipe previously
@sthetixofficial I've done a system wipe, but kept saves.
im kinda late but what if i actually install pirated games and tinfoil stuff will it brick or what?
it doesnt but as soon as you connect the ofw to the Nintendo server, you will get banned
Do you have a mig cartridge yet
no.
I still have non functioning sysmmc. after following the steps. I geta, pkg2 decryption failed, pkg1/pkg2 mismatch or old hekate. message. I need help but i feel like so close to a fix.
try replacing the sdcard with other brands. if it doesn't work, maybe the sdcard connector is damaged
My Nintendo Switch V1 unlocked via software, only accesses Android, is turning off when entering locked or unlocked mode, is there a fix?
you mean your console can only run android but not other things?
@@sthetixofficial yes
Have you done the level2 unbrick guide?
@@sthetixofficial I saw your video about the guide. Did not do it yet. I got my switch in this condition. I will try using your guide, because when entering the emulated nand I am taken to Android, and on the original nand the console turns off.
ok goodluck
the hats pack link is dead
codeberg.org/sthetix/HATS
@@sthetixofficial awesome! Thank you for getting back with me so quickly
i wanna do this procedure but switch cannot turn on and when put on charging not show anything, any sugestion?
press and hold the power button for 12 secs and try to power it on again
@@sthetixofficial thanks thats work now
cant system wipe says [fatfs] Error: NOFAT also ofw stuck at switch logo cant do anything but go hekate
do you have any ideas? i have no back ups. emmc benchmark works so emmc is working but no ofw no cfwsysnand either nothing boots?
lockpick also says it cant mount system
You need to do the level 3 unbrick guide and limit it to 16.1.0 firmware only.
hallo sthetix, punya saya OFW tapi ngebrick pas update FW, bingung cuma stuck di logo nintendo saja. Ini kenapa ya? kesalahan hardware atau software ya, cara memperbaikinya ke tuser atau bisa diperbaiki sendiri?
kalo gak di mod sblmnya, dan kondisinya demikian, keliatannya ada banyak faktor. emmc chip nya jebol atau kerusakan di bagian chip wifi. coba bawa ke teknisi
@@sthetixofficial sebenarnya masalahnya kompleks, sebelum ngebrick, switchnya pernah digunakan pakai cfw softmod, tapi karena overheat/kepanasan saya masukin kedalam tas keadaan layar di matikan, jadinya kena (tidak bisa membaca SDcard yg menyimpan data CFW), akhirnya saya bersihkan dengan menghapus/mengembalikan kepengaturan pabrik untuk saya jadikan OFW, setelah ke OFW lalu saya upgrade FW ke 17.0….., dan akhirnya kena brick. Kalau kasus seperti ini apakah juga kena di EMMC?
bisa jadi itu mesin softmod yg versi zombie. coba ikutin guide prodinfo_gen di channel saya
@@sthetixofficial bolehkah saya tau berapa harga perbaikan di sthetix jika device saya memang kena di emmc? Sebab device saya sudah tidak bisa masuk ke hekate lagi, karena kasus overheat yg mengakibatkan tidak bisa membaca sdcard, jika saya masukkan sdcard akan mental dan akan stuck di logo nintendo, setelah itu tidak bisa dimatikan, kecuali ditekan power lebih lama.
@SaidDrawing kalo agan tinggal dimana? coba wa ke saya.. no wa nya bisa di cek di google maps
Why would you perform a systemwipe or Haku? Why not just upgrade your firmware
because of this ruclips.net/video/n6xEakq3n58/видео.htmlsi=NHHWSGTpTmo4m_Ds
@@sthetixofficial how long does it take to ship one of your switches from Indonesia to the United States?
And by that I mean delivery
@HimMrM about 3 - 7 days
@@sthetixofficial no way, seriously?
.... 👋
Why would you do a system wipe in the first place?
you better watch this ruclips.net/video/n6xEakq3n58/видео.html
after selected systemwipe.te, error>>>>fatal variable 'version' not found error occured on or near line 12
Can anyone help?
can ur console boot to the ofw normally?
"A fatal error occurred when running Atmosphere.
Program ID: 0100000000000005
Error Desc: std::abort() called (0xffe)
Report saved to /atmosphere/fatal_errors/report_000000000ccad89.bin"
Getting this error please help
try deleting the atmosphere and bootloader folder and re extract my hats pack