I'm new to engraving, I've learned a lot from your channel and all the different possibilities. I like this idea, however I wish it had a lid. I'm not sure if you're still checking comments for this video, if so thanks for all your input.
Amazing Way to explain, I am new working with laser and I am learning a lot with your videos, if possible please make some videos cutting different objects, there are not many videos that explain with details how you do it, thank you very much.
As usual...great video. I’m going to make an acrylic box to display my drone. I’m wondering if the finger joint is the way to go. Thanks for making these vids.
I’ve done several acrylic boxes with finger joints and they work out pretty well. I would make the finger sizes much bigger than a wood box. Due your burn rate for acrylic it will be different than wood.
Very good tutorial and picked up several tips. Really appreciate the effort you go to into explaining what to look for, i.e. rattle test and start from here function - as well as others. Quick question about the preview and burn function. Question if you can help me out. I noticed in other videos I watched the preview and burn only apply to those items in the workspace. But, on my version of LightBurn, the preview and burn functions want to burn everything - even vectors not on the workspace. There must be a setting somewhere I am missing. Do you know what I am doing that would allow me to only burn and preview what is on the workspace?
I wanted to thank you for all the good Info, also need to ask why can't I install lightburn update 9.22 keep getting a warning ( can't automatically close applications.) what should I do at this point? I didn't that particular problem in the forum.
make sure you have LightBurn closed then proceed. mine did the same thing. tried it after I closed LightBurn and it worked fine. Thanks for watching, I appreciate it!
great video. I am using creative space to run my xtool P2.When I do the file. I am not getting the labels. I get the cut out, but not labeled (kerf sizes) . What could cause this. Thanks
In your previous box building video you cut the holes first then cut the outside for each piece. Have you found that the order for cutting doesn't make a difference? Thanks
I always have the interior cut outs done first other wise when the main part of the box is cut out the piece can move and your box won’t go together well.
Thanks for taking the time to make these videos, very informative for me.
My pleasure, I appreciate your comments
I'm new to engraving, I've learned a lot from your channel and all the different possibilities. I like this idea, however I wish it had a lid. I'm not sure if you're still checking comments for this video, if so thanks for all your input.
That box generator can add a lid for sure. Thank you for your comments
Those with coral may be able to import the file into coral.
Coral usually convert a lot of files .
allot of people us coral
Great work,very informative!!!!
Glad it was helpful!
Amazing Way to explain, I am new working with laser and I am learning a lot with your videos, if possible please make some videos cutting different objects, there are not many videos that explain with details how you do it, thank you very much.
I appreciate your comments, thank for watching!
thanks for the ideas! you are great!
Glad you like them! thanks for watching
As usual...great video. I’m going to make an acrylic box to display my drone. I’m wondering if the finger joint is the way to go. Thanks for making these vids.
I’ve done several acrylic boxes with finger joints and they work out pretty well. I would make the finger sizes much bigger than a wood box. Due your burn rate for acrylic it will be different than wood.
@@computercreationz thank you. Ill do the test.
Very good tutorial and picked up several tips. Really appreciate the effort you go to into explaining what to look for, i.e. rattle test and start from here function - as well as others. Quick question about the preview and burn function.
Question if you can help me out. I noticed in other videos I watched the preview and burn only apply to those items in the workspace. But, on my version of LightBurn, the preview and burn functions want to burn everything - even vectors not on the workspace. There must be a setting somewhere I am missing. Do you know what I am doing that would allow me to only burn and preview what is on the workspace?
thank you for all the comments, I appreciate it
love the shirt.
Being a dad and grandpa is the best!
Thanks for the video. Did you glue the finger joints together?
Yes I always glue them up.
I wanted to thank you for all the good Info, also need to ask why can't I install lightburn update 9.22 keep getting a warning
( can't automatically close applications.) what should I do at this point? I didn't that particular problem in the forum.
make sure you have LightBurn closed then proceed. mine did the same thing. tried it after I closed LightBurn and it worked fine. Thanks for watching, I appreciate it!
great video. I am using creative space to run my xtool P2.When I do the file. I am not getting the labels. I get the cut out, but not labeled (kerf sizes) . What could cause this. Thanks
It seems that this enervated has some issues with diode lasers so I’m not sure since all of my lasers are co2. Sorry I’m no help
In your previous box building video you cut the holes first then cut the outside for each piece. Have you found that the order for cutting doesn't make a difference? Thanks
I always have the interior cut outs done first other wise when the main part of the box is cut out the piece can move and your box won’t go together well.
Thanks for the great video,. 👍how would you price a box like this. 25.00 or 30.00 plus shipping?
Yes you are in the ball park for sure.
I'd like to find out if/when you decide to sell that Thunder 24
possibly early spring 2022
I have an Epilog Edge Engraver/Cutter. Unfortunately, Lightburn does not support Epilog. Do you have Corel instructions for these box projects?
Sorry Donna I don’t know anything about Corel
@@computercreationz thank you
I gotta ask where you are from. The mascot is from my hometown.
Central Nevada
Quick question, In your other video your burn rate was .070 and now its .090 .. Is it a different laser or did something change? Thanks
thickness and type material, this is 1/4”. the other idea was 1/8” matwrial
@@computercreationz gotcha! Thanks
what are these orange things to hold down the plywood??
bought them on Etsy, called Thunder honeycomb pins
What are the orange thing on you table?
Those are 3 d printed honeycombs pins I bought off of etsy. Just search for Thunder laser honey comb pins. They work great.