Hell yeah that’s a nice setup I work on just about everything that has a motor so I got to have a lot tools one minute I might be working on a Toyota next I’m working on a lawnmower but I got a triple bank matco 6s 87 inches long 31 inches deep I do a lot of electrical and diags but I don’t use a power probe I use a muti meter and test light that’s how I was taught
6:57 Hey great video, it's always nice to see something different rather than all Snap-on stuff like a lot of videos. Rather than changing/upgrading that 1/2 inch air impact you should just get a new anvil for it, they aren't that expensive and a lot cheaper than buying something else. I have the same Milwaukee mid torque, I usually just open it up maybe 1 or twice a year, clean the old grease out then put some more in, clean the shell and bearing then re-grease the nose cone where the anvil slots though. Makes a big difference and will make it last a lot longer. 👍🏻👌🏻
Good video, those crows foot wrenches sit in my box 90% of the time but when you need em you NEED them. Pretty much a must on newer vw intakes and some diesel work
Thanks man! Yeah I don’t use them often either, I find when I do, it’s usually to break free a stubborn power steering like fitting. Thanks for watching!
Good solid video. Have the same cart as u at work. Makes me want to do video of mine. I bought mine use from tool truck with snap on badge..got for 400 and it kinda sux but works.
Dang man! That sounds like a wicked deal! I paid a lot more than that for mine, mine was a demo model tho so I got a bit of a deal. Send me a link if you end up doing a video, would love to see it! Thanks for the support! 👍
Nice video! You don’t have a ton of tools like some of these other guys on RUclips, but that’s a solid set!! I too have a small toolbox with the bare necessities and can still work circles around the other guys in the shop with the $20k setups.
Thank you! Yeah, I try to stick to what I need. I have a some more tools in my other box, this is my main setup tho. I can’t believe what some people spend on tools. To each there own tho. Thanks for watching
Thanks man! Much appreciated! The stand was a great addition, I forgot to mention it in the video. It’s not a snap on stand, it’s universal. Had to bolt it to the box, but it work’s excellent for holding my laptop. Thanks for watching
@BikesBucksandTrucks yes thank you it was very enjoyable and helpful. Found one of these locally that I'll hopefully be picking up next week and found there is very little content out there on this specific model. I was worried the 3 drawer may not be big enough but your video has shown me it's plenty for me at least for a few years. Thanks
Yea good on ya, I think you would benefit greatly with a different set up in that tiny space. I'd suggest a stationary box that can double as a work bench with a vise. Then you can get a few wall hung units for above it for your blow molded cases, chemicals etc. You can even run lights under the wall units and you have a nice work station.
Hell yeah that’s a nice setup I work on just about everything that has a motor so I got to have a lot tools one minute I might be working on a Toyota next I’m working on a lawnmower but I got a triple bank matco 6s 87 inches long 31 inches deep I do a lot of electrical and diags but I don’t use a power probe I use a muti meter and test light that’s how I was taught
Nice man! Same here, just about anything. How do you like the Matco?
6:57 Hey great video, it's always nice to see something different rather than all Snap-on stuff like a lot of videos.
Rather than changing/upgrading that 1/2 inch air impact you should just get a new anvil for it, they aren't that expensive and a lot cheaper than buying something else.
I have the same Milwaukee mid torque, I usually just open it up maybe 1 or twice a year, clean the old grease out then put some more in, clean the shell and bearing then re-grease the nose cone where the anvil slots though. Makes a big difference and will make it last a lot longer. 👍🏻👌🏻
I will keep watching. All people start at the beginning, so no worries there.
Thanks buddy! Appreciate the support!
Good video, those crows foot wrenches sit in my box 90% of the time but when you need em you NEED them. Pretty much a must on newer vw intakes and some diesel work
Thanks man! Yeah I don’t use them often either, I find when I do, it’s usually to break free a stubborn power steering like fitting. Thanks for watching!
Good solid video. Have the same cart as u at work. Makes me want to do video of mine. I bought mine use from tool truck with snap on badge..got for 400 and it kinda sux but works.
Dang man! That sounds like a wicked deal! I paid a lot more than that for mine, mine was a demo model tho so I got a bit of a deal. Send me a link if you end up doing a video, would love to see it! Thanks for the support! 👍
Nice setup.
Thanks man!
Good stuff man. Showing some support
Thanks brother!
Nice video! You don’t have a ton of tools like some of these other guys on RUclips, but that’s a solid set!! I too have a small toolbox with the bare necessities and can still work circles around the other guys in the shop with the $20k setups.
Thank you! Yeah, I try to stick to what I need. I have a some more tools in my other box, this is my main setup tho. I can’t believe what some people spend on tools. To each there own tho. Thanks for watching
Hey man. Great video, very enjoyable.
I really like the stand on the side!
Thanks man! Much appreciated! The stand was a great addition, I forgot to mention it in the video. It’s not a snap on stand, it’s universal. Had to bolt it to the box, but it work’s excellent for holding my laptop. Thanks for watching
@BikesBucksandTrucks yes thank you it was very enjoyable and helpful.
Found one of these locally that I'll hopefully be picking up next week and found there is very little content out there on this specific model.
I was worried the 3 drawer may not be big enough but your video has shown me it's plenty for me at least for a few years. Thanks
Love the tool box and ur videos are u going to do new tools that u get or top 10 u would buy again
Thanks man! I appreciate the words of encouragement! Been thinking about a new video soon, il be sure to tag you if I use either idea!
For your first shot on u-tube you did pretty well.
Thank you! That’s really great to hear! :)
Great video 👍
Thank you! :)
Yea good on ya, I think you would benefit greatly with a different set up in that tiny space. I'd suggest a stationary box that can double as a work bench with a vise. Then you can get a few wall hung units for above it for your blow molded cases, chemicals etc. You can even run lights under the wall units and you have a nice work station.
Thanks for the ideas brother! One of these days maybe il have the Monday to upgrade a bit haha thanks for watching!
Very nice but when you retire have a big shop for them
Lololo
Yes that’s the plan lol thanks for watching!
🔥🔥💯
Thanks for watching!