Ratchets, we love our Ratchets. I had read somewhere that the average tech owns 18 Ratchets. I have mentioned this fact on most tool type channels and so far, at least those making videos, 18 is definitely on the low end. Some have been in the 75 - 100 range. Thanks for the tour brother, very nice setup.
You just came up in my suggested and I knew I recognized that box! I saw your post a few days ago in the HF toolbox group on Facebook. Love that setup, unfortunately I have space constraints in my current shop and can't have anything that big even though I need it lol
I agree with the icon wrenches. I bought a set about a year ago and it has served me well. I have warrantied a few wrenches before and is easy. I will say I have replaced the 10mm 17mm with snap on because I was tiered of braking teeth on the ratcheting end.
I'm imagine you have high humidity there and triple digit heat summers. We have same issue with tools and sockets rusting. I use clp oil coat them with to get surface rust off tool . It leaves a flim of protecting from the humidity.
Have you tried to see if you can swap out the drive on you 1/4" extended ratchet with the drive from your 3/8" high speed I have the 1/4" and 3/8" extended reach but the head on the 3/8 can be a bit big for those tight spots.
Hey big fella, when i heard you say "I would use these over snap on spanners" then the cringe part. What makes me cringe is paying 5 times for snap on over other quality brands. Some snapon gear is great, Here in Australia we have a different selection of brands but i have cheap set for 50 bucks, i will happily cut them down, use them as flogging spanners, bend them when you get those Devil Jobs and i have Gearwrench spanners. Knowing that here those sets are $700, for 10mm-19mm when you can get complete really good quality sets for $200 in 6mm-22mm from competitor, you can get a set of Metric, Imperial spanners and Ratchet Rings for that one set of Snap-On's. If you need specialist tooling, i completely understand guys getting onto the Snap-On gear but Otherwise its crazy!
I've got that same set of Craftsman USA 1/2" impacts sockets at work. They are great, but I'm going to take them home and replace them with something else. I don't want to break one and worry about getting a China Crapsman back. Also, what brand are your wrench holders? Nice setup.
Very true, I’ve had that same thought. I’d be so bummed if I broke one. And my wrench organizers are by toolbox widget. They are the best, most versatile organizers out there.
I wouldn't use them at work probably but I didn't want my old Craftsmans to leave my shop cuz they have sentimental value, and my work tools stay locked in the hangar.. so I went to Tractor Supply and got their 1/2" impact sockets to keep in our campers tool kit, that stay with it all of yhe time. I have actually been impressed with them so far and for about 25 bucks a set and no skips.. you cant go wrong!
GearWrench, they are my favorites I’ve used so far. They’re so much cheaper in price than the tool truck versions that it’s not even a comparison to me.
Milwalky is really leading the way in cordless apparatus .I just saw the new 12v cordless induction soldering iron for wire repairs. And heats red hot in seconds
what is your opinion on the Milwaukee dremel, the Milwaukee grinders and the new Milwaukee tire buffer? I'm a fairly new tech, so far a year of working on cars at a tire shop and I was curious about those tools as I already have the Milwaukee high torque 1/2 inch impact and the 1/4 inch hex impact driver (both I use daily)
I have the Mac 32 piece set which is basically the 29 piece with the step bits included for a special and they're fantastic. Cut everything like butter and they're all lifetime warranty.
Why on the socket holder trays does everyone have their sockets upside down?! I'm sure there's a reason but nobodys said. My OCD HAS to have mine facing up so I can visually compare when I look at them to the ones around making sure they're in the correct order, or if I'm guessing on a size it helps to see how big they are. Even comparing to like ones next to it! WHY!?!
Because most of the socket holders are designed for the socket sit upside down, they’ll not sit properly once you get to the bigger sizes if you put them up right
I'm personally sitting at a point where I borderline refuse to buy snap-on anything anymore. There quality control has gone in the dumpster and I've had more headaches (and butthole aches) from strap on then anyone else. If I spend twice the money I want twice the product.
as far as wrenches go i got a snapon set from 1/4 -1 5/16 7-25mm and at first i hesitated and then the tool guy said he would give it to me at $1475 and i havent regreted it since
@@workingclassgarage yep. I saw your comment probably 30 secs after I made mine. Have you used the ultra at all of so what are your thoughts for being an all around scanner/scope
I love watching these cause it gives me ideas I’ve never thought of. One for sure is that dremmel.
I like watching toolbox tours so I can get ideas of tools that I need. What brand is that driveline socket set?
It is Matco, it has all the main sizes you need.
@@workingclassgarage next time you are around them can you hit me with the part number? I can't find them on the website. Thanks
Thanks man, I was wondering..
The sunex ones work great too
Sunex has the complete set 5 PC and both in swivel or standard. Cheaper too but I had for years with no issues.
Ratchets, we love our Ratchets.
I had read somewhere that the average tech owns 18 Ratchets. I have mentioned this fact on most tool type channels and so far, at least those making videos, 18 is definitely on the low end. Some have been in the 75 - 100 range.
Thanks for the tour brother, very nice setup.
Nice set up really like when I watch these videos to see the tools and that there actually used not just bought to fill up space 😀
Super organized! Love the red cart and white drawers.
I love watching these videos cause it gives me ideas. Your cart is very organized thanks for sharing.👍👍😄
Thanks for showing your tool cart, interesting to see what tool people have and how everything is laid out.
*grabs pen, paper, and wallet*
"Yep I need one of those...and those...and those...
Bruh this is the most organized tool box I have ever seen
thanks for sharing, very nice set up all around.
Glad you're back!!!
You just came up in my suggested and I knew I recognized that box! I saw your post a few days ago in the HF toolbox group on Facebook. Love that setup, unfortunately I have space constraints in my current shop and can't have anything that big even though I need it lol
Nice set up. I find truck chassis is metric but I need my sae for the working box side or the working side of the truck.
I agree with the icon wrenches. I bought a set about a year ago and it has served me well. I have warrantied a few wrenches before and is easy. I will say I have replaced the 10mm 17mm with snap on because I was tiered of braking teeth on the ratcheting end.
For the money icon over snap on for the hand tools
Thank you for sharing your wonderful video I am watching from South Africa
I'm imagine you have high humidity there and triple digit heat summers. We have same issue with tools and sockets rusting. I use clp oil coat them with to get surface rust off tool . It leaves a flim of protecting from the humidity.
love all the tool brand variations
You have more tools than I have in my entire shop!
Thanks for sharing another great video...really admire your tool choices, and organizational skills!
I love my 18” and 9” 3/8 mac ratchets as well as my 28” 1/2 mac very nice tools
Good to see you back to making videos brother
hell of a setup !!! keep em coming love your videos!! dialed in collection nice job!
Liked your vid. Thx for sharing. Watching from Ontario Canada
Where’d you get that magnetic tray with the picks and bit adapters at? Also the magnetic strip with the swivel socket adapters?
4:21 that drawer is frickin beautiful
love the setup, clean af. really nice!
nice set up thanks for the ideas on how to better set up my home garage
Impressive set up he who had most tools wins 👍
Thanks for taking the time to give us a tour👍🏽
Nice set man, how is the mobile mechanic business going? I think a lot of people would like to see more content on that also
Currently taking a break from mobile to focus on family and my full time job.
Nice & organized tool cart bro. Helps you be more efficient 🤘🏽🤘🏽
Super nice collection man! That's a nice shop too!
Really thinking about getting those Gearwrench extension swivel sockets.
Do it!
Let me send you one of my JM3 oil filter wrenchs to add to that box. It won 2 awards at SEMA show last year 2021
“Nah bro I’m just tired don’t worry about it”
Definitely high lol. It’s all good homie takes one to know one 😂🤥
Looks kinda like my old set up, except my was riddled with name snap on & made in USA
Have you tried to see if you can swap out the drive on you 1/4" extended ratchet with the drive from your 3/8" high speed I have the 1/4" and 3/8" extended reach but the head on the 3/8 can be a bit big for those tight spots.
That Milwaukee drawer though. Gosh damn! Lol
Hey big fella, when i heard you say "I would use these over snap on spanners" then the cringe part. What makes me cringe is paying 5 times for snap on over other quality brands. Some snapon gear is great, Here in Australia we have a different selection of brands but i have cheap set for 50 bucks, i will happily cut them down, use them as flogging spanners, bend them when you get those Devil Jobs and i have Gearwrench spanners. Knowing that here those sets are $700, for 10mm-19mm when you can get complete really good quality sets for $200 in 6mm-22mm from competitor, you can get a set of Metric, Imperial spanners and Ratchet Rings for that one set of Snap-On's.
If you need specialist tooling, i completely understand guys getting onto the Snap-On gear but Otherwise its crazy!
Sound like someone trying to get a Milwaukee sponsorship lol but great video and I just got a Macsimizer box myself and I love it
What are those wrench racks you have? I checked your amazon store but they werent there. Thanks!
Hey man love the mac tool box and the organization you got. So if i could get you to organize my tool box how much you charge me 😁😁😁😁😁
Your Milwaukee m12 3/8 stubby looks new compared to mine I use the hell out of that thing and it’s doing stuff other 3/8 battery tools can’t do
Where those black dividers you use for your wrenches & pliers from ?
That’s a awesome set up you got man.
What tray is that for your mini ignition wrenches? Never seen one of those before.
Nice set up.
What kind of wrench organizers are those in the wrench drawer?
Can you order just that holder you have for the three Milwaukee guns on the side of the cart? Or did that come with the Macsimizer cart?
Who makes those wrench organizers?
Hey bro where’d you get those racks for your wrench’s ?
What makes a tool good for example if I buy on Amazon how do I know there not cheaper than harbor freight quality wise
Bout time you made another video lol. Nice setup btw
What are the wrench organizers you are using for your wrenches and pliers
What brand is that wrench organizer?
I've got that same set of Craftsman USA 1/2" impacts sockets at work. They are great, but I'm going to take them home and replace them with something else. I don't want to break one and worry about getting a China Crapsman back. Also, what brand are your wrench holders? Nice setup.
Very true, I’ve had that same thought. I’d be so bummed if I broke one. And my wrench organizers are by toolbox widget. They are the best, most versatile organizers out there.
I wouldn't use them at work probably but I didn't want my old Craftsmans to leave my shop cuz they have sentimental value, and my work tools stay locked in the hangar.. so I went to Tractor Supply and got their 1/2" impact sockets to keep in our campers tool kit, that stay with it all of yhe time. I have actually been impressed with them so far and for about 25 bucks a set and no skips.. you cant go wrong!
I have those same small craftsman wrenches, where’d did you get that organized for them?
Who makes those impact swivel socket set an witch brand do you like better 🙊🙊🙊
GearWrench, they are my favorites I’ve used so far. They’re so much cheaper in price than the tool truck versions that it’s not even a comparison to me.
@@workingclassgarage 😍😍😍 are they pin less
🙊🙊🙊
How do you like those matco flex head box wrenches? Blue point sells them too but almost double the price
What wrench organizers are those?
Do you have a tour of your husky box?
Question, those straight wrench racks, where did you get those from
Amazing box!
Great tour! Thanks for sharing
Wish we could get milwaukee stuff off tooltrucks here in the uk. Great vid tho
Milwalky is really leading the way in cordless apparatus .I just saw the new 12v cordless induction soldering iron for wire repairs. And heats red hot in seconds
The icon wrenches I bought were worthless. Jaws would spread and they rounded fasteners often
what is your opinion on the Milwaukee dremel, the Milwaukee grinders and the new Milwaukee tire buffer? I'm a fairly new tech, so far a year of working on cars at a tire shop and I was curious about those tools as I already have the Milwaukee high torque 1/2 inch impact and the 1/4 inch hex impact driver (both I use daily)
The m12 diegrinders are badass
Any drill bit sets you'd recommend from Mac or Snap-On? Currently we don't have a Matco guy in our area.
Any of Mac tools bits are nice. Get the Cobalt bits if you are cutting through stainless or hardened steel.
www.jerseydiscounttoolco.com/product-page/knkut-29pc-hyper-step-drill-bit-set-pre-order
Buy these, they’re basically the Matco ones
I have the Mac 32 piece set which is basically the 29 piece with the step bits included for a special and they're fantastic. Cut everything like butter and they're all lifetime warranty.
What brand and where did you buy that holder on the side of your tool cart for your electric impacts?
Why on the socket holder trays does everyone have their sockets upside down?! I'm sure there's a reason but nobodys said. My OCD HAS to have mine facing up so I can visually compare when I look at them to the ones around making sure they're in the correct order, or if I'm guessing on a size it helps to see how big they are. Even comparing to like ones next to it! WHY!?!
Because most of the socket holders are designed for the socket sit upside down, they’ll not sit properly once you get to the bigger sizes if you put them up right
What type of wrench organizer’s do you use?? I’m in the market for something diffrent
What wrench organizers do you have?
Nice fuckin setup brotha-man. Thank you for showin off!!
Badass setup
Where did you get those Extra deep sockets???
Lol, of course you have two of everything, it is the way of the mechanics.
I like icon wrenches a lot!
466 is a good simple engine
What crepper are you using? Looks like a gearwrench if so how do you like it?
Get a lock and lube on your grease gun with the accessories kit
I'm personally sitting at a point where I borderline refuse to buy snap-on anything anymore. There quality control has gone in the dumpster and I've had more headaches (and butthole aches) from strap on then anyone else. If I spend twice the money I want twice the product.
Also respect on very few pneumatic tools
If you don’t want those old school Mac green prybars anymore I’d be happy to buy them I can’t find them anymore
Great video 👍
What railing do you use for the wrenches
Does this cart have all 4 caster or are 2 fixed?
Who makes the double flex head wrenches you have?
What tool box is that from Mac?
Need box storage tour
Well Done!
Very nice
Hows the Titan tools bit set holding?
I haven’t broken one yet so I’d say pretty good!
What grease coupler do you use on your gun?
That m12 3/8” stubby looks like it’s been through some sh*t 😂😂
as far as wrenches go i got a snapon set from 1/4 -1 5/16 7-25mm and at first i hesitated and then the tool guy said he would give it to me at $1475 and i havent regreted it since
When u enjoy being ripped off
Good stuff🤘🏽
What location you work at? I'm a pennwest tech
What model of toolbox is this?
I’m waiting on Milwaukee pipeline series specifically for that extended 3/8 ratchet. Way better design
Do you work for Pepsico? If so what location are you at? I work at location 0494.
Why did you come back to the pepsi shop?
I never left, I was doing mobile repair on nights and weekends.
@@workingclassgarage yep. I saw your comment probably 30 secs after I made mine. Have you used the ultra at all of so what are your thoughts for being an all around scanner/scope
love the mac and i always wanted some mac stuff, dont like matco
U still a mobile mechanic?
Currently taking a break to focus on my family and full time job.