@@colt4667 Whenever they weld over the ways, I cringe. Then again those parts don't require much precision and I suppose faulty parts are job security anyway.
Don't know the quality of the repair, but the feeling I have seing those quys how are working together, and they look some how happy! This is verry cool!
Totally agree. Did you see the heat treating procedure? WOW... All of OSHA regulation were adhered, steel toes sandals, tight fitting clothing, face mask for fumes, and of course SAFETY glasses. Then again you don't need then if you squint when grinding. Want to bet longevity of that axle?
@@АндрейЩигорев-ц3г Thats an age old trick all welders use, I myself have bent an electrode/arc rod in 4 places on 4 different angles to weld in a tight spot with a bulldozers axle in my way. unless the flux breaks off (which is rare) its just fine to use a bent rod. I was more concerned at the flux on the welds only being chipped off, that should be a wire wheel on a hand grinder,
I love watching these guys work and am always amazed buy the abuse their turning tips on their lathe tools seem to get. Are we being scammed by modern day inserts???
Two things, you can buy a hardened bit that cuts through a job, it stops the tool they use here getting smacked against the uneven surface, and get a wire brush wheel for the hand grinder for the arc weld flux removal, a tapping hammer does not get all the flux off a job.
A shaft broken from stress. Drill and tap. insert a threaded rod 1/3 the diameter of the shaft. Then fill weld using a buz box with bent welding rod. This new shaft must be at least 200 times stronger than original.
Unglaublich was diese geschickten Spezialisten können! Ein Tipp! Beim Schweissen MUSS die Masse (Ground) direkt am Werkstück Kontakt haben! Wenn der Schweiß Strom über die Drehbank läuft, werden alle Kugellager zerstört!
Muy buen trabajo de artesanía. Pero al instalarlo en el vehículo y cargarlo seguramente se romperá otra vez, porque el material ya sufrió mucho calentamiento y ya no es resistente como cuando salió de fábrica, que fue hecho de una sola pieza en un molde y templado.
Buenos días buenas tardes o buenas noches mi hermanoscomo siempre excelente trabajo saludos y bendiciones desde Monterrey NL México y le mando su poderoso like 👍
Ну люди как бы не имея по факту инструментов и тд делают как могут ) тем лично мне и интересный контент - нарушения правил безопасности на 200% токарь без очков кулачки торчат он в рубашке которую легко может захватить ) удивлён что есть маска для сварки ! Люблю ещё посмотреть в Пакистане люди автобусы как собирают по сути ничего нет для этого у них -это просто экстрим ! И смотрю одного австралийского парня там как бы оборудования на сто миллионов у него - но то совсем другой контент ! Советую так же посмотреть как из старых аккумуляторов делают новые прямо на обочине - и при этом оно работает ! А насчёт сломается оно или нет - ну не известно возможно проходит два три года как бы а потом сделают опять - главное всегда есть работа у человека !
I don't want to rain on anyones paraide...but that was a real KRAPPY weld job! To wit: too narrow a groove for a stick welder to tie into the sides with good penetration....all of the first pass (shown) did NOT TIE into the viewers L. hand groove wall & there was porosity shown. I think that the Machinests ( who are quite good) should do the machining & let the Welders weld... JWS
Thợ sửa chữa là người sửa sai của máy tính, trên công cụ lao động của họ , mà họ đang làm chủ, họ thiện nghệ đến mức độ bàn tay vàng, của người thợ sửa chũa , thế giới muôn màu muôn vẻ, công việc của họ làm đẹp cho đời sống, làm đẹp cho xã hội, làm đẹp cho giai cấp công nhân, cả thế giới này biết ơn họ , Lê Nin việc làm cho giai cấp công nhân, Giải Phóng công nhân , công nghệ mới. Có điện là có tất cả, Trương Văn Trai dịch từ Sputnic Liên Bang Nga.
Работают как хирурги в белых халатах.Движения отточены до совершенства.Видимо они эту работу делали много раз.В других местах эту деталь сдали бы на лом а здесь отремонтировали.
عمل ممتاز ،و لكن غياب تام للامن و الامان اثناء العمل،.. كان عليك ان لا تستعمل المطرقة لإدخال القطعة ،و الآخر جالس تحت ،...عليك استعمال آلة ضاغطة بدل المطرقة ،هي ليست غالية و هي أكثر أمانا من المطرقة ،..كما يمكنك صناعتها في ورشتك .ليست صعبة لصنعها... هذا إن لم تتمكن من شراء آلة ضاغطة لإدخال القطع... اتمنى ان اراك في فيديو آخر تحرس اشد الحرص على امانك و امان مساعدك ... انت تستاهل كل خير .سلام.
0:49 SAYING HELLO when you meet and SHAKE HANDSHAKES ARE NOT THE SAME THING! By shaking hands you transmit INFECTION and you can get SICK! But Muslims got it into their heads that if the Almighty allowed a person to die from an infection, then there is no need to interfere with this, you cannot go against the Almighty! The question is, who told you this? Isn't it the one who wants your people to die out, not the Almighty?
У нас приезжают азиаты,пилят бетон болгаркой без распиратора,лазят по крышам без страховки,не считая нужным пристегнуться и дерутся из за такой работы. Дикари это в общем. А местное население сидит без работы .@@rsz90182
Back in capitalist Cuba they would pull out that shaft and make a new one , after Fidel went though this repairs methods are qualified of very advance. That’s comunism .
Holy crap I’ve never seen a cross slide and tool post shake so much during the initial interrupted cuts. These guys run their machines HARD!
Literally rattling the bolts loose. So dangerous.
probly not his dont care plus glasses just one of that swaft .
They don't bother to protect the lathe ways from weld spatter either.
@@colt4667 Whenever they weld over the ways, I cringe. Then again those parts don't require much precision and I suppose faulty parts are job security anyway.
@@colt4667 I thought he was just gonna tack it, and bring it to the floor. Nope.
When you work for an actual engneering company these videos are HILARIOUS to watch.
Your channel has no content showing your "expertise" , you must just sweep the floor there.
@@peatmoss4415 Cool story...
These guys are so talented absolutely amazing make something out of nothing wonderful trademen
Don't know the quality of the repair, but the feeling I have seing those quys how are working together, and they look some how happy! This is verry cool!
As a retired mechanic, I can say that it was always gratifying to take something that wasn't working properly and get it running again.
Awesome job, you are a great company 👍👍👍
Good job!
All tolerances are guaranteed less than 2 fingers.
Totally agree. Did you see the heat treating procedure? WOW... All of OSHA regulation were adhered, steel toes sandals, tight fitting clothing, face mask for fumes, and of course SAFETY glasses. Then again you don't need then if you squint when grinding. Want to bet longevity of that axle?
@@caddyrack The curved electrodes used in welding serve as a guarantee of quality!
@@АндрейЩигорев-ц3г I beg you pardon, I missed the curved electrodes.🤣
@@caddyrack Why dont you pop over and show them your way.
@@АндрейЩигорев-ц3г Thats an age old trick all welders use, I myself have bent an electrode/arc rod in 4 places on 4 different angles to weld in a tight spot with a bulldozers axle in my way. unless the flux breaks off (which is rare) its just fine to use a bent rod. I was more concerned at the flux on the welds only being chipped off, that should be a wire wheel on a hand grinder,
Excellent skills ! 👍
I love watching these guys work and am always amazed buy the abuse their turning tips on their lathe tools seem to get. Are we being scammed by modern day inserts???
Hard working people. Ive been to Pakistan. The people there are amazing good hearted people
..or Afghanistan?
I watch this video in full with great interest. Really good workmanship. Wishing you a good luck.
Natürlich, weil da ständig etwas kaputt geht und repariert wird bis zum nächsten zerbrechen
Two things, you can buy a hardened bit that cuts through a job, it stops the tool they use here getting smacked against the uneven surface, and get a wire brush wheel for the hand grinder for the arc weld flux removal, a tapping hammer does not get all the flux off a job.
A shaft broken from stress. Drill and tap. insert a threaded rod 1/3 the diameter of the shaft. Then fill weld using a buz box with bent welding rod. This new shaft must be at least 200 times stronger than original.
Buen trabajo adelante chicos
Excellent machine work, you're number one
Excellent mechanic
Machinist.
sallam for you from algeria ,bravo
Undoubtedly an excellent job. Very competent people. I have only one doubt. Will the welding withstand the strain?
Нет потому что корень шва плохо проварили
when you have an engineers brain and hands of an artist❤❤❤👍🏻👍🏻👍🏻
Mate brain of an artist, hand off engineers
😊😊this IS my dream : to understand a turning machine AND Work with IT......prima !!! 😅
Its called a Lathe
@@marksavage1108 yes, thanks mark. In German IT s called DREHBANK.
واقعی بہترین مرمت کی طرحآگیا؟
Super jest to panowie zrobione Pozdrawiam serdecznie. 👍👍👍👍👍
Unglaublich was diese geschickten Spezialisten können!
Ein Tipp!
Beim Schweissen MUSS die Masse (Ground) direkt am Werkstück Kontakt haben!
Wenn der Schweiß Strom über die Drehbank läuft, werden alle Kugellager zerstört!
You guys are masters ❤❤❤❤❤😂😅
I wonder how quickly it will break again?
Молодцы, хорошая работа мастеров профессионалов. Ставлю жирный лайк.
где ты здесь мастеров увидел? такая халтура просто жесть.
Você são uns Artistas na arte de recuperar peças de auto padrão parabéns pelos seus trabalhos 😊👍👍👍🙏🏻🙏🏻
Un trabajo impecable 👍👍👍👍👍👍
Muy buen trabajo de artesanía. Pero al instalarlo en el vehículo y cargarlo seguramente se romperá otra vez, porque el material ya sufrió mucho calentamiento y ya no es resistente como cuando salió de fábrica, que fue hecho de una sola pieza en un molde y templado.
اتفاقا" در اشتباهید دوست عزیز .خوب هم کار میکند
Сломался потому, что с завода был с микротрещиной.
Very nice👍👏🌹🌹🌹
I like the set the Jack, and try to press the shaft out. Then stop to remove the holding bolt.
Салам тебя с Дагестана, супер
Excelente profissional
👍👍👍👍👍👍👍👍👍
saludos desde los mochis sinaloa mexico elegante tornero y soldador pura 7018 y 7024 soldadura resistente
is there a way to measure the viability of this repair? don't they need special welding process and material for this?
It is guaranteed, until it is out of sight.
Buenos días buenas tardes o buenas noches mi hermanoscomo siempre excelente trabajo saludos y bendiciones desde Monterrey NL México y le mando su poderoso like 👍
Un buen trabajo genial chapo👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾
I think they had enough tools to do the job 👍
Its nice for temporary apply load 75 percent load to this remake 100 percent use
I admire these guys!
So close! Unfortunately at the end you misaligned the keyway shafts immediately before welding.
great job man
Vc é mestre.
сварили разные марки стали и радуются, при первой же нагрузке в этом месте и лопнет снова.
Ну люди как бы не имея по факту инструментов и тд делают как могут ) тем лично мне и интересный контент - нарушения правил безопасности на 200% токарь без очков кулачки торчат он в рубашке которую легко может захватить ) удивлён что есть маска для сварки ! Люблю ещё посмотреть в Пакистане люди автобусы как собирают по сути ничего нет для этого у них -это просто экстрим ! И смотрю одного австралийского парня там как бы оборудования на сто миллионов у него - но то совсем другой контент !
Советую так же посмотреть как из старых аккумуляторов делают новые прямо на обочине - и при этом оно работает !
А насчёт сломается оно или нет - ну не известно возможно проходит два три года как бы а потом сделают опять - главное всегда есть работа у человека !
Так в этом же вся суть. Работой себя обеспечивают на будущее.
почему разные, два куска одной детали? Как они резьбу режут на этом станке, на глаз?
I like how hed put his hand on the chuck while its turning 300 rpm
The splines at the ends of the shaft are not in line after the repair! Does it make a difference?
Great Work !!
you are very very good
Thank you so much 😊
Is not shortly compared with the original length?
👍привет из России
Oliver snowball what do you think
What is this part from?
Very nice!
New sub
Всё чем страдает пакистан и другие индусы, это перегруз. У них всё что на колёсах, перегруженно. Это национальное.
Curtis from CEE eat your heart out, if only you could be so good. LOL
Curtis is better. And he keeps his place of work clean too.
These are the jobs Kurtis fixes. I guess you didn’t see the pits in the “welds”?
@@clintwestwood2731I guess you missed the joke 🤦
If so, from Asia! Don't worry about Central Europe. We cope.
Muy bueno! va like!
What a crazy place.
I want know about front axel band
Good job Guys ;oP
Czy oni nie mają piły albo chociaż szlifierki do cięcia? Czy wszystko musza ciąć palnikiem?
متاسفانه عدم امکانات استعدادهای بزرگی را نابود میکند
Lubrication? What's that?
Very good
pisau bubut hasilnya sangat bersih
Czysto, jasno, bezpiecznie. Można ? Można
Những bạn làm trong khu công nghiệp mà tự nhận mình giỏi phải biết xấu hổ. Vì các bạn chỉ làm những việc mà ai cũng làm được. Không như họ!
can someone tell me why they thread one side and the other side isnt?
What's that old saying... "he has done so much for so long with so little that now he can virtually do anything with basically nothing"...
Re work is not advisable for the main shaft support
How long have you lived in Pakistan
Так легко стопорный болт откутили. Наверное недавно уже делали 😂😂😂
True Craftsmen.
मान गए उस्ताद
Nice old Nike jack
I don't want to rain on anyones paraide...but that was a real KRAPPY weld job! To wit: too narrow a groove for a stick welder
to tie into the sides with good penetration....all of the first pass (shown) did NOT TIE into the viewers L. hand groove wall & there
was porosity shown. I think that the Machinests ( who are quite good) should do the machining & let the Welders weld... JWS
Creo que faltó engrasar antes de meter el buje en sus soportes
welding in a machine cartridge is the height of idiocy
no cooling fluid ??
Thợ sửa chữa là người sửa sai của máy tính, trên công cụ lao động của họ , mà họ đang làm chủ, họ thiện nghệ đến mức độ bàn tay vàng, của người thợ sửa chũa , thế giới muôn màu muôn vẻ, công việc của họ làm đẹp cho đời sống, làm đẹp cho xã hội, làm đẹp cho giai cấp công nhân, cả thế giới này biết ơn họ , Lê Nin việc làm cho giai cấp công nhân, Giải Phóng công nhân , công nghệ mới. Có điện là có tất cả, Trương Văn Trai dịch từ Sputnic Liên Bang Nga.
Bahut acha
Работают как хирурги в белых халатах.Движения отточены до совершенства.Видимо они эту работу делали много раз.В других местах эту деталь сдали бы на лом а здесь отремонтировали.
Рулетка- главный инструмент!! Интересно, ядерный реактор тоже так можно отремонтировать???😂 😂😂😂
عمل ممتاز ،و لكن غياب تام للامن و الامان اثناء العمل،.. كان عليك ان لا تستعمل المطرقة لإدخال القطعة ،و الآخر جالس تحت ،...عليك استعمال آلة ضاغطة بدل المطرقة ،هي ليست غالية و هي أكثر أمانا من المطرقة ،..كما يمكنك صناعتها في ورشتك .ليست صعبة لصنعها... هذا إن لم تتمكن من شراء آلة ضاغطة لإدخال القطع... اتمنى ان اراك في فيديو آخر تحرس اشد الحرص على امانك و امان مساعدك ... انت تستاهل كل خير .سلام.
Save 70 percent cost.and 30 percent machine shop good
there living in the stone age....
Büyüksün usta.
0:49
SAYING HELLO when you meet and SHAKE HANDSHAKES ARE NOT THE SAME THING! By shaking hands you transmit INFECTION and you can get SICK! But Muslims got it into their heads that if the Almighty allowed a person to die from an infection, then there is no need to interfere with this, you cannot go against the Almighty! The question is, who told you this? Isn't it the one who wants your people to die out, not the Almighty?
😂good“s🎉‼️
Its scrap metal whatever we do its fine.
you can tell there was only about 1/4 of the metal holding that together before it broke. so any repair will be better then it was lol
Who needs pre heating what size rod the one on the floor lol
Так то все отлично но есть одно но,плохо прочистил коренной шов осталось не провар и шлаг а это залог трещины!😊
Location
Bradford, UK.
Why is it that I see workers in sandles and I know it's going to be bad?
Reparația este de10
That shaft was cracked for a LONG time. Look how black it is!
Why dont these men wear steel toed shoes? One wrong move and the lose their toes For life 🐾🐾
У них новые отрастают как хвост у ящериц, а если совсем плохо,то придёт новый мужчина там их много.
That only happens in the US and people sue their boss.
o they have steel foods.from babies walk without shoes
У нас приезжают азиаты,пилят бетон болгаркой без распиратора,лазят по крышам без страховки,не считая нужным пристегнуться и дерутся из за такой работы. Дикари это в общем. А местное население сидит без работы .@@rsz90182
look closely....they're wearing OSHA approved steel toe sandals......🤣
Why Tata commercial vehicles damage many tyre
Why do the Pakistan workers in these videos always sound like the chipmunks from a Walt Disney movie?
Are you real
За работу ставлю пятёрка а за ТБ двойка где очки
Хоть немного уважал бы станок, и точит и варит на нем
Ужас, нарушены все параметры прочности!!😢 Закалка металла не производится.. сплошная сварка и токарка 😢😢😢и
Back in capitalist Cuba they would pull out that shaft and make a new one , after Fidel went though this repairs methods are qualified of very advance. That’s comunism .
Must have a
Lot of on job injuries!