@@Fentertainment There is a special tool that makes the window handle easy to remove. The Snap-on number is A159 but lots of others available. Great video!
Watched your window install video and now this. Even have the same truck so you have given me confidence. A paint can opener is useful for removing door clips as well.
You have a great way about you sir, humble to the point and an excellent example for others to follow for their own vehicle .. God Bless you and your family
All very good advice. You can get the clip off with a thin fabric rag or towel by pulling the sheet under the handle away from the grip if you don't have the crows foot trim tool.
For the window crank clip removal try using a rag. You just spread the rag flat and run the edge in between the door card and the crank and try your best to catch the side of the clip with the rag. Try it both directions since the clip can be on backwards sometimes. It works surprisingly well in my experience and has a very low chance of scraping your door card if you haven't removed one of these before.
haha...I installed the power window kit in my '99 Silverado from your video... now installing the power door locks from your video... Thank you sir!! just one note tho, you forgot to show the reason for the extra wires on the driver door...(central locking feature that unlocks/locks the pass. door if you manually unlock/lock the driver door😉) Great video tho my friend...love your content!
dang I was pretty much following along the whole process thinking "i think i can figure this out" till u got to the end talking about the electrical connections and stuff and i got lost lol wish u could do a little beginner tutorial video for that for non-electritians people hehe
If you’re confused about the bulk of wires shown it’s color coded so you just match and you’re ready to go. The “hardest” part is finding power source and grounding it.
Superb explanation. My god the window handle took me forever to remove. Y’all make it look so stinking easy. Thank you for focusing on that part and the importance of where the actuator is connected. I wish i could like the video multiple times!!
Explained the best way possible! I got the same kit and installed it today, it took me a while to figure out the 2009 Chevy Cobalt auxiliary box. I read the car manual because my wires was so short and I couldn’t do the back doors, i also wasn’t sure if i was going to get it to the battery. I ended up getting a 12V from the floor fuse box since it’s under the glove box. Im not sure if that’s safe but i seen people do it and i just wanna know if it’s safe, I connected the red cable to the fuse and plugged the fuse. It works just great, i didn’t use any other fuses or “borrow” or depending on a power that’s for another thing, when i read the manual for the fuse box, ot said there is a fuse for unlocking the doors even tho my car doesn’t unlock automatically, but i used that fuse to get the 12V. i couldn’t find the alarm installation guide but I haven’t connected my trunk and second headlights, will you be able to tell me how to connect the trunk and also if the fuse method i used for the 12V os safe? And if i can buy wires to extend it to the back since the wires are short, and if im supposed to buy wires that’s the same color or any wire works? Thank you
hey bro, thanks for all your help my 04 c.s. has cat eyes like yours i would think the wiring would be the same ... i got a couple of ?? if you don't mind. on your relay is the two black wires ground and what color wire did you tap for lights under dash? IF YOU HAVE TIME THANKS!!!
Hey man great video, I’m doing this on my 2005 Silverado and was wondering what exact wire did you tap into for the lights? Please answer I need help thanks in advance!
Hey man thanks for the great video but do you know think there is a way to route bthe wire for the trunk pop to make the horn sound instead? I believe I have a close truck to yours. I'm 02 Silverado.
Ryan there is a brown and white wire from the module separate from the other set for the actuators. Is that for a rocker switch to manually lock & unlock the doors?
Hi , Great video, very informative. I have teh same truck silverado. how did you connect to the wires from the module to paring lights under the dash? did you connect the horn as well?
nice, how does the new door lock look like? I am hoping to replace mine, that has been broken in twice, some thieves used probably a screw driver and just ripped the locker.
bossman great video!! i bought two kits the other day after watching this.. i bought the one you got on amazon and i bought a viper alarm system . & i also purchased a additional set of actuators for the viper alarm since it didnt come witih it. so I wired the one from amazon everything works flawless no problems. Ive done it the same way with the viper alarm but everything works besides the doors unlocking and locking with the actuators. the viper alarm came w a relay. The amazon one didnt require one. do you think i need to use the relay or is there something i am missing ? thanks in advance !!
I did something similar but used a viper alarm system so that I would have keless entry. My question is,can I install a button connected to the relayinside the car so that I unlock the doors while the car is running? The viper alarm will not unlock the doors while the engine is running. It automaticaly locks the doors when I start the car ( by choice in the settings) I was thinking if I added another branch of power to the relays it would send current back into the alarm system and maybe destroying the alarm.
hey man, great video! i have a quick question, i got a 2003 f150 and i'm wondering where to hook up the wires for the lights so that they blink when you lock and unlock. haven't installed the kit yet as I just got it today but I can't find anywhere where to hook up the two wires for the indicators, any help would be greatly appreciated!
Can you please tell me that if in my car ,there is company fitted manual centre locking system that means by only switching driver side lock all 4 doors are locked, then does it mean that in all of the doors there is an actuator motor , and if i want to install the centre locking system then what shoul i have to do .
Definitely want to put this in my 68 Camaro. Can it be wired so when you unlock it your interior lights come on, and then go out after a few seconds after you've gotten in the vehicle like a normal modern car.
Sure, However this kit does not offer dome light supervision. This has exact question has been on my mind for a week now. Some more $$$ expensive keyless entry systems has this feature built in. I plan on doing this upgrade to my vehicle soon because I not only want just dome light supervision but I want to add some puddle lights to the bottom of my truck mirrors as well. Which is the same concept but on the exterior of the vehicle like newer vehicles! I didnt think anyone would want to know that but now, I plan on it! I believe It can be done for less than $10.
Acker 1 day ago My 04 tj works like I expected. One thing I noticed is if I use the manual lock button on the inside drivers door unlocks both doors unlock but only locks the drivers door. Is that normal
hey i got a problem. i installed the actuators and everything but whenever i try to lock my truck it’ll just unlock right after so it won’t stay locked. do you know what might be causing this?
Can you make a video to install a push button to open the door to the Universal Car Door Lock-Actuators. I want to remove the door handle and replace it with just a button but i want the Universal Car Door Lock-Actuators to unlock the door
You can look up the color of your power wires for your radio online by the year of your vehicle and follow that wire to the fuse box. Then tap off of it. They do sell devices to do so to avoid crappy connection or just splice and solder with battery disconnected.
very clear video!! funny enough I was looking at that very same kit before seeing your video. However, I realize that the actuators I previously bought all have two (2) wires, each. Possible to just purchase an unlock system with the remotes and utilize em? Your video was very straight forward!
Possibly with a good kit from dei (directed electronics inc) they make viper, avital , Clifford etc. Just dont want to wire up relays if you dont have to. I'm still using the one remote daily with mine and everything is good to go. Hoping to do power windows on it soon.
Find the Keyless Entry System here - amzn.to/3q3c45t
No one ever shows how to take those manual window handles off. Thanks for being so detailed. Love this video.
Glad it was helpful!
@@Fentertainment There is a special tool that makes the window handle easy to remove. The Snap-on number is A159 but lots of others available. Great video!
with those clips you can usually just push them down and slide the window crank off. The clip will pop back into place and never comes off.
Same exact kit i just got in the mail today. Im stoked to do the install. VERY well documented, sir. Thanks for the details.
This video is fabulous, thank you for making it. Great tips and explanations!
Finally, a good installation video. Thank you sir!
I second that. Good walkthrough.
This was a great video. Best I’ve seen on this. I bought the same kit and have nearly the same truck(2001 Silverado). Thanks for sharing
I really appreciate this video! Very clear and short video that got to the point!! Thank you!
this video just made me ok with buying a truck that does not have power locks. thanks!
Watched your window install video and now this. Even have the same truck so you have given me confidence. A paint can opener is useful for removing door clips as well.
Thanks a ton for the video! A lot more clear than other videos I've seen, actually explained what everything did.
I have to say that this was a clear and easy to understand video. need more videos like this on youtube. thanks bro.
Your tip with the 9 v battery made my day and was worthy of a sub haha
Awesome, I appreciate it.
@@Fentertainment please can you do a video explaining the absence of relays
Awesome install
You have a great way about you sir, humble to the point and an excellent example for others to follow for their own vehicle .. God Bless you and your family
Thank You. I just hate watching diy videos that jump around and dont explain things properly. I do appreciate your comment!
Watch many vids but yours is so clear , i wanna thank you for sharing!
Appreciate you leaving a comment. Thanks. Hope to have a power window installation video soon.
Thanks for the vid. I'm in the process of doing mine on express cargo van and the info really helpful
All very good advice. You can get the clip off with a thin fabric rag or towel by pulling the sheet under the handle away from the grip if you don't have the crows foot trim tool.
BRAVO !!! DOWN TO EARTH SPOT-ON , THANK YOU 👍⚡️😇
Very informative unlike the other videos out there
I just put this in my '97 2door Blazer. Thanks for the info!
excellent installation brother!! def, learned some good stuff
best video ive found so far. Thanks for posting brother.
Excellent Video! This will help Me tremendously. Thank You.
Great video brother. Clear and informative instructions!!!🤙
Glad it was helpful!
Excellent detailed instructions! Thanks 🙏🏼
Very professional job. Good explanation. Thank you.
Excellent details info on this install....Great job
This was really helpful. Thanks 👍
Within the first few minutes you already had me sub very detailed good job
Appreciate it man.
For the window crank clip removal try using a rag. You just spread the rag flat and run the edge in between the door card and the crank and try your best to catch the side of the clip with the rag. Try it both directions since the clip can be on backwards sometimes. It works surprisingly well in my experience and has a very low chance of scraping your door card if you haven't removed one of these before.
Thank you so much this helped and cleared up all my questions
haha...I installed the power window kit in my '99 Silverado from your video... now installing the power door locks from your video... Thank you sir!! just one note tho, you forgot to show the reason for the extra wires on the driver door...(central locking feature that unlocks/locks the pass. door if you manually unlock/lock the driver door😉) Great video tho my friend...love your content!
great video mate the power window video and this so helpful for my 1970 ford xw im doing with universal kit
App na bahut achacha batsya ha or central locking pata laga or smj ma bhi aaya thank you sir .
Great video I’m gonna put some on my cutlass
dang I was pretty much following along the whole process thinking "i think i can figure this out" till u got to the end talking about the electrical connections and stuff and i got lost lol wish u could do a little beginner tutorial video for that for non-electritians people hehe
same hahaha I dont think I can do this
@@ivanrodriguez268 ikr I'd have to watch 20 more videos
It's find a ground and a positive power cable . Not rocket science
If you’re confused about the bulk of wires shown it’s color coded so you just match and you’re ready to go. The “hardest” part is finding power source and grounding it.
Maybe you should just let someone smarter do it for you
Damn good tutorial. Thank you very much!
Great video mate. Thanks 🙏
very good installation video...subscribed!
Superb explanation. My god the window handle took me forever to remove. Y’all make it look so stinking easy. Thank you for focusing on that part and the importance of where the actuator is connected. I wish i could like the video multiple times!!
Glad it helped! Ive also heard of people using a old thin shirt or towel to wrap around the handle to pull the clip out.
Explained the best way possible! I got the same kit and installed it today, it took me a while to figure out the 2009 Chevy Cobalt auxiliary box. I read the car manual because my wires was so short and I couldn’t do the back doors, i also wasn’t sure if i was going to get it to the battery. I ended up getting a 12V from the floor fuse box since it’s under the glove box. Im not sure if that’s safe but i seen people do it and i just wanna know if it’s safe, I connected the red cable to the fuse and plugged the fuse. It works just great, i didn’t use any other fuses or “borrow” or depending on a power that’s for another thing, when i read the manual for the fuse box, ot said there is a fuse for unlocking the doors even tho my car doesn’t unlock automatically, but i used that fuse to get the 12V. i couldn’t find the alarm installation guide but I haven’t connected my trunk and second headlights, will you be able to tell me how to connect the trunk and also if the fuse method i used for the 12V os safe? And if i can buy wires to extend it to the back since the wires are short, and if im supposed to buy wires that’s the same color or any wire works? Thank you
awesome video well done!!
Great video sir… thank you!
Excellent instruction block. 👍
hey bro, thanks for all your help my 04 c.s. has cat eyes like yours i would think the wiring would be the same ... i got a couple of ?? if you don't mind. on your relay is the two black wires ground and what color wire did you tap for lights under dash? IF YOU HAVE TIME THANKS!!!
Great video, thank you
Very helpful thank you
Great video thanks for sharing.
Good video thanks for sharing👍
Really good video ... Thanks
Hey man great video, I’m doing this on my 2005 Silverado and was wondering what exact wire did you tap into for the lights? Please answer I need help thanks in advance!
Good job
Thanks, your tips worked good for me
Awesome!
Nice!
Nice job
Hey man thanks for the great video but do you know think there is a way to route bthe wire for the trunk pop to make the horn sound instead? I believe I have a close truck to yours. I'm 02 Silverado.
thank u it really help...
Ryan there is a brown and white wire from the module separate from the other set for the actuators. Is that for a rocker switch to manually lock & unlock the doors?
Hi , Great video, very informative. I have teh same truck silverado. how did you connect to the wires from the module to paring lights under the dash? did you connect the horn as well?
What did you use to mount the brackets on the door? Did you drill new holes in the door? How are your screws holding the braket to the door?
nice, how does the new door lock look like? I am hoping to replace mine, that has been broken in twice, some thieves used probably a screw driver and just ripped the locker.
If you ground either of the two wires that say main control module does it lock and unlock also? So you could add a switch in the vehicle?
I'm gIad stumble on your video ,,,,,,,just about to do the same thanks
Can you also wire this kit to an existing actuator that’s already on the vehicle ?
What wires did you hook up to the parking lights? Is it the brown and white wires from the junction box? Its the only other loose wires mine came with
Very nice
to remove the window lever, i use a strip of rug and tie a knot onto the shaft of the lever and pull it.
Nice vid man. Definitely going to be doing this with my 92 f150 restomod project!
What did you do with the white and brown wires that says connect to main unit ?
You are so awesome
bossman great video!! i bought two kits the other day after watching this..
i bought the one you got on amazon and i bought a viper alarm system . & i also purchased a additional set of actuators for the viper alarm since it didnt come witih it. so I wired the one from amazon everything works flawless no problems. Ive done it the same way with the viper alarm but everything works besides the doors unlocking and locking with the actuators. the viper alarm came w a relay. The amazon one didnt require one. do you think i need to use the relay or is there something i am missing ? thanks in advance !!
Nice 👍
Which were for the parking light under the hood?
I did something similar but used a viper alarm system so that I would have keless entry.
My question is,can I install a button connected to the relayinside the car so that I unlock the doors while the car is running?
The viper alarm will not unlock the doors while the engine is running. It automaticaly locks the doors when I start the car ( by choice in the settings)
I was thinking if I added another branch of power to the relays it would send current back into the alarm system and maybe destroying the alarm.
So the 12v red and the black ground are connected to your parking light or just the 12v power
hey man, great video! i have a quick question, i got a 2003 f150 and i'm wondering where to hook up the wires for the lights so that they blink when you lock and unlock. haven't installed the kit yet as I just got it today but I can't find anywhere where to hook up the two wires for the indicators, any help would be greatly appreciated!
Follow the links in the description. Put your year make and model in. Im unsure and I would have to look also.
Can you please tell me that if in my car ,there is company fitted manual centre locking system that means by only switching driver side lock all 4 doors are locked, then does it mean that in all of the doors there is an actuator motor , and if i want to install the centre locking system then what shoul i have to do .
Men, 3k likes aren't enough for such of help thanks
Thank you for showing this! Very helpful and informative. Are there kits that are alarm and power lock bundles you are familiar with?
No alarm
I need to hire you to do this on my 95 Sentra gxe 😂
Can I just wire my Red wire into a fuse under my dashboard on driver side, if so , which fuse should I tap into?
Can this work with mazda 3 2008 its have sentral lock fuctory
Will this work tor a 2021 Chevy Spark?
What was the relay used for ? Nice video by the way.
Definitely want to put this in my 68 Camaro. Can it be wired so when you unlock it your interior lights come on, and then go out after a few seconds after you've gotten in the vehicle like a normal modern car.
Sure, However this kit does not offer dome light supervision. This has exact question has been on my mind for a week now. Some more $$$ expensive keyless entry systems has this feature built in. I plan on doing this upgrade to my vehicle soon because I not only want just dome light supervision but I want to add some puddle lights to the bottom of my truck mirrors as well. Which is the same concept but on the exterior of the vehicle like newer vehicles! I didnt think anyone would want to know that but now, I plan on it! I believe It can be done for less than $10.
ths should work on a 2018 f150 no issues right?
Acker
1 day ago
My 04 tj works like I expected. One thing I noticed is if I use the manual lock button on the inside drivers door unlocks both doors unlock but only locks the drivers door. Is that normal
is there a way to program a new key fob?
Will this work with the key as well
Great video. Did you connect the ground wire to the battery terminal or to a spot on the cabin?
A spot under the dash.
hey i got a problem. i installed the actuators and everything but whenever i try to lock my truck it’ll just unlock right after so it won’t stay locked. do you know what might be causing this?
If I have a car that already has power locks do I just splice it in ?
And how do you rig up the horn to it
Can you make a video to install a push button to open the door to the Universal Car Door Lock-Actuators. I want to remove the door handle and replace it with just a button but i want the Universal Car Door Lock-Actuators to unlock the door
Great job! Really good description on the installation. Can you tell us where you got your 12V from?
You can look up the color of your power wires for your radio online by the year of your vehicle and follow that wire to the fuse box. Then tap off of it. They do sell devices to do so to avoid crappy connection or just splice and solder with battery disconnected.
very clear video!! funny enough I was looking at that very same kit before seeing your video.
However, I realize that the actuators I previously bought all have two (2) wires, each. Possible to just purchase an unlock system with the remotes and utilize em?
Your video was very straight forward!
Possibly with a good kit from dei (directed electronics inc) they make viper, avital , Clifford etc. Just dont want to wire up relays if you dont have to. I'm still using the one remote daily with mine and everything is good to go. Hoping to do power windows on it soon.
@@Fentertainment I will definitely keep posted for that one. I think i might just get the full kit and go through fully.
@@skylinekid4life ten4
Can this be controlled over WiFi / internet? Is there anything that will do this?
I have a Nissan Versa Sedan.The only downside is having manual windows/locks. Would I need to buy another kit for the two back doors in the back?
This kit has 4 actuators to do a sedan.
would like to see how exactly the park lamps are wired in
Ay what car did you do this on
How is it holding up? Any problems with the unit? How far does the key fob reach? I really like the 9v test learn something new everyday.
Still going atrong. Its about the same as the oem range maybe a tad further.