MercedesBenz A200d | Manifold & EGR cleaning

Поделиться
HTML-код
  • Опубликовано: 17 окт 2024

Комментарии • 29

  • @fauxpro4561
    @fauxpro4561 2 года назад +12

    If you did a step by step detailed instructional video of this it would gain massive popularity on here I'm sure

  • @richbayley7246
    @richbayley7246 Год назад +3

    Tried to do this job today but there are so many gaps in the procedure, i don’t see the point in going to all the trouble of filming and editing to miss the tricky stuff that make it doable, we ended up just cleaning what we could get to as we couldn’t get to one of the bolts (center right of the plastic manifold)

    • @atlasboom5233
      @atlasboom5233 2 месяца назад +1

      DONT Whorry bro hi did not clean the intake manifold , just the egr and acceleracion tubs ans airsensor ... the intake manifold is just after this part , you have to take more off..is not a easy job ...

  • @pppam
    @pppam 2 года назад +3

    How many km on this diesel? Also fuel quality? So much carbon. Or is it normal?

  • @FleetAdmiral215
    @FleetAdmiral215 Год назад +2

    This is happened twice in 6x months to my Wifes 2016 B200d AMG with just 27K on the clock, Merc need to do something!

  • @CARSONWEBEU
    @CARSONWEBEU 9 месяцев назад

    how many kilometers?

  • @simondeleon6397
    @simondeleon6397 9 месяцев назад

    I have a question, it is possible remove the manifold without removing the compressor ?

    • @TMCHL
      @TMCHL 4 месяца назад +1

      👎 nope 😢 genius mercedes design!

  • @DiscoveringSpain
    @DiscoveringSpain 2 года назад +2

    Any chance of you answering the questions?

  • @holty929
    @holty929 2 года назад +1

    Does any fluid come out of the Egr cooler when you took it off ?

    • @zenrana99
      @zenrana99 3 месяца назад

      Yes normally when you remove the black pipe it will leak out coolant.

  • @alexandrepetitjean7991
    @alexandrepetitjean7991 6 месяцев назад +1

    Le collecteur d’admission derrière il faut aussi le démonter et le nettoyer les volets sont encrassés aussi autant dire que la le problème est pas réglé

  • @RaviKumar-xi3wi
    @RaviKumar-xi3wi 2 года назад

    How much labour for this work bro

  • @Adrian-yw4td
    @Adrian-yw4td Год назад +2

    This operation is much more complicated than it appears in this video.

  • @W.deutschmusik
    @W.deutschmusik Год назад

    What material did you used to clean it

  • @youuu4307
    @youuu4307 8 месяцев назад

    Great job man ! thanks ✌👍👍

  • @safirajimenezhernandez8297
    @safirajimenezhernandez8297 Год назад

    Hola como se llama la pieza que as desmontado

  • @mariuspopusoi4764
    @mariuspopusoi4764 Год назад

    Thank you.

  • @BMRStudio
    @BMRStudio 4 месяца назад

    Nope. You have to take off the intake manifold line too.
    Swirl flaps always has double amounts on them what You see on the throttle valve…
    EGR is killing all diesel engine. Most stupidest idea ever in car industry.
    You can get same less NOx emission with a simple water injector!

  • @themaestro1888
    @themaestro1888 10 месяцев назад

    What’s the point of doing all that and not remove the inlet manifold?
    Waste of time

    • @TMCHL
      @TMCHL 4 месяца назад

      Removing inlet manifold of this engine is a nightmare!

  • @markvroomen
    @markvroomen 7 месяцев назад

    Just do a carbon cleaning and it is gone

  • @CARSONWEBEU
    @CARSONWEBEU 9 месяцев назад

    на авто ездил извозчик) судя по состоянию воздушного фильтра! дальше можно не смотреть.

  • @anacletodeluca8194
    @anacletodeluca8194 Год назад

    It isn't a good job of you don't check the collector.