Are u just showing off here your speedy technic or teaching to someone who wish to learn the armature winding?.while changing the winding to other slot why do you hurry to turn the armature ? you think that you are a magician ? don't you do it slowly.
Car oil very little of it will do better too my friend the stuff you sprayed cleans it and is only temporary i used that stuff it last only.certain amount of time only cleans don't last long as soon as that stuff cleans put very little car oil in not satiate it but to spread with finger and it will work
Sounds cool like vacuum cleaner you made it newer than when you first got it now i under stand you sprayed that stuff on there to slide it in there okay that's an idea
Holaa buenas agradecer por la informacion escribo desde colombia ,,, es que no se que tipo de alambre usas ( 0.6 o 0 60) cuantas vueltas se deben dar ?? Muchas gracias
why the wire can be burned? if dc motor cannot rotate, do we should change the Cooper wire too? or this come from diffremt reason? how we can solve this? my fan cannot rotate, and i don't smell burn from motor
You recorded a video of more than 10 min., But did not teach anything. What is the purpose? Number of turns, where to connect each coil. Afff. I wasted my time too.
Oh, just fast forward. The number of turns would obviously vary by your actual motor. How much space is in the stator, your wire gauge, etc. You match the gauge as closely as you can just eyeballing it, and wind till there is no more space, taking care to count and balance the windings so they are the same all around. Of course this means your motor is no longer the same spec as before your refurb, but you're probably not using exactly the same wire anyway, so the spec is sure to be out. This isn't precision engineering here. We just want the motor to turn.
Olá beleza tudo bem gostaria de um favor e trocar umas ideia com você. Assisti seu vídeo, eu tenho um motor na minha sucata da mesma família que o seu, sendo bem menor mais com bastante velocidade gostaria de recupera ló e diferente do seu, só tem três locais para bobina o mesmo não tem mais os fios foi tirado e vendido para o ferro velho pode me ajudar. Na dúvida mande uma resposta para o E-mail: joaoqpapelaocoisavelhapidichao grato Manaus AM Brasil.
Fixed an old burned out DC motor like fixing burned out old light bulb good job man
I came here cause I was stumped at how to get the back of the motor off LOL. Glad I found this video, now I know how to repair it too :) . Thanks!
How do you open it with breaking it
Are u just showing off here your speedy technic or teaching to someone who wish to learn the armature winding?.while changing the winding to other slot why do you hurry to turn the armature ? you think that you are a magician ? don't you do it slowly.
My drill motor is smelling like it's burning out so maybe it's time for me to repair it. And this video is what I needed for help😉
Thank, very nice video. How many turns did you roll for each channel?
Fantastic vídeo conglatulation for you friend!
Very nice video
Very very nice this works How much turns are winding now
Very good
You skipped the crucial soldering part... You deliberately want us to struggle with it? Its a no for me. Losing my time here
And like fixing an old burned out car engine brang it back to mechanical life good excellent
Nice 👌👍😍💕👏👏❤️
Car oil very little of it will do better too my friend the stuff you sprayed cleans it and is only temporary i used that stuff it last only.certain amount of time only cleans don't last long as soon as that stuff cleans put very little car oil in not satiate it but to spread with finger and it will work
How to calculate number of turns for windings
Sounds cool like vacuum cleaner you made it newer than when you first got it now i under stand you sprayed that stuff on there to slide it in there okay that's an idea
one advice dip it in oil for some time before dismantling iy
Good job
*C'est pas compliqué en fait, il suffit de compter les tours de fil et de mesurer sa section lors du démontage et le tour est joué!*
Thank you!!
You didn't show how many turns you made around each section, because it's important !!!
Great 😍
how to open it...?
Holaa buenas agradecer por la informacion escribo desde colombia ,,, es que no se que tipo de alambre usas ( 0.6 o 0
60) cuantas vueltas se deben dar ?? Muchas gracias
एक सिलौट में कितने टन लेने हैं
How to repair USB charger
Sir
Make a video rewinding for dc motor 550
What a great music! Name?
Good video
How many turns?
Save me trying to count them!
i think 10 or 15 turns
Sim entende, encontrei outro do mesmo e abri tinha 35 voltas para cada bobina muito agradecido ok
100
You can use 0.5 mm copper wire they dont burnt fastly 100 turns and bboooom motor is much more powerful
0.6mm....?
0.8mm.....?
Why is your channel called American Tech when you aren‘t from the USA?
What is number of turn coil
how can i fix my motor if it only rotate 1/5 of a revolution..? can you pls tell me what to do.?
I have a question , how many rund of a coper ?
how do you open it, band it ?
The Balance?
What size copper wire do you use
Is seriously?? But if in the same video it shows what size it uses. which is 0.6mm
Good job ! Dear what is the diameter of the wire used?
Main repairing karna chahta hun 1 side how much ruling please thoda help
what is your training
Bro pls please clear how many turn .
It's a lot of work for a $25 motor
Only worth it when the motor size is hard to find etc. or no replacement
kaç tur ???????
Nice😉😉
Kitne time ki winding kar rahe hain to pata nahin chal raha hai
burnt...
easily...
Сколько примерно метров провода 0.8 нужно для перемотки 775 мотора и сколько витков?
why the wire can be burned? if dc motor cannot rotate, do we should change the Cooper wire too? or this come from diffremt reason? how we can solve this? my fan cannot rotate, and i don't smell burn from motor
Learn some basic physics and electronics first
Great
Winding Slow Karo
11 minute video with 17 Ads.
NO THANK YOU
get a job
I fast forwarded through it. Didn't catch a single ad. Don't know why, maybe RUclips thinks I've watched enough ads today.
How many turns ???
GET A NEW SONG ALREADY!
mark collard for real, and he should explain
Aap kisi ke comment ko reply nahi karte
Não diz quantas voltas o vídeo é editado e acelerado não deixando acompanhar as voltas dadas affs não ajudou muito não
Show,,,,,,,,,,
You recorded a video of more than 10 min., But did not teach anything. What is the purpose? Number of turns, where to connect each coil. Afff. I wasted my time too.
Oh, just fast forward. The number of turns would obviously vary by your actual motor. How much space is in the stator, your wire gauge, etc. You match the gauge as closely as you can just eyeballing it, and wind till there is no more space, taking care to count and balance the windings so they are the same all around. Of course this means your motor is no longer the same spec as before your refurb, but you're probably not using exactly the same wire anyway, so the spec is sure to be out. This isn't precision engineering here. We just want the motor to turn.
Bhai video mein samajh nahin aaya
Olá beleza tudo bem gostaria de um favor e trocar umas ideia com você. Assisti seu vídeo, eu tenho um motor na minha sucata da mesma família que o seu, sendo bem menor mais com bastante velocidade gostaria de recupera ló e diferente do seu, só tem três locais para bobina o mesmo não tem mais os fios foi tirado e vendido para o ferro velho pode me ajudar. Na dúvida mande uma resposta para o E-mail: joaoqpapelaocoisavelhapidichao grato Manaus AM Brasil.
Copyright content
💯%🔝👌👏👏
👍
Non technical
:(
Excellent very good
Very good
good job
How many turns?
12 to 15
bos how many turns???
0.55 wire with 28 turns per loop