Mazda 6 Valve Cover Gasket Replacement
HTML-код
- Опубликовано: 15 окт 2024
- Replacing the valve cover gasket on my 2009 Mazda 6 after noticing that it was leaking a bit of oil.
Disclaimer: I am also learning as I am going along. I do not claim to be a professional or that I am doing things the proper way. I am just vlogging how I went about replacing the valve gasket and always encourage everyone to do their own research before starting a new project on their car.
Songs Used:
LiQWYD ~ Waves
LiQWYD ~ Flight
Outro Song:
Ehrling ~ No Worries
great video ,and very helpful so the guess work is done for us doing one for the first time. thank you
Thank you, I appreciate it.
The way I got around taking off the boys on the ignition coils is I just put on a regular socket and removed it from the ratchet. Then I put the ratchet over the socket. You won’t be able to attach the ratchet all the way into the socket but it will go in JUST enough for it to catch and you can start turning the socket to loosen the bolt. Good luck guys!
The hardest part are those bolts on the left side that have a plastic tab over them. I tried watching the tutorial and did not understand how you got those off besides practically breaking the plastic tabs. I also lost the part where there is pushable tabs to release the teething pressure on the bolt to remove the plastic fasteners.
Amazing video bro, so comprehensive.
Thanks, I’m glad it was useful.
just did this after replacing spark plugs, noticed the two middle cylinders were drenched in oil. When you look at the design, there's not many bolts around the center gasket areas. seems after a while, it's a good idea to pull the plugs and see if oil is present. otherwise the mazda 6 has been great at 190K now.
very good video, my exact same model. i have the same issue, the middle two coils are all in oil. the middle gasket definitely has some design issue
The VVT actuator seal should also be replaced when doing this job, as it cannot be removed and installed with the cover in place.
Thanks for sharing!
Great job. Just did 1.✨👌👌👌
This is awesome thank you!
Thank you, glad it could help.
I got 2006. Mazda 6 2.0 petrol. I need to do same job as you. Well done for video!!!
Lv u brother
What's the part number
Ur cylinders head bolts are missing too
2 bolts