How to Replace Driver's CV Axle 06-08 Mazda 6
HTML-код
- Опубликовано: 19 сен 2018
- Buy Now!
New CV Axle Shaft from 1AAuto.com 1aau.to/ia/1AACV00194
1A Auto shows you how to repair, install, fix, change or replace broken, worn, or vibrating CV axles. This video is applicable to the 06, 07, 08 Mazda 6
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oHb/1AXAA00013
• Pry Bar 1aau.to/odb/1AXAA00020
• 10mm Socket 1aau.to/ow2/1AXAA00017
• 12mm Socket 1aau.to/oA7/1AXAA00015
• 15mm Socket 1aau.to/oA7/1AXAA00015
• 17mm Socket 1aau.to/oA7/1AXAA00015
• 32mm Socket 1aau.to/ou/1AAST00003
• Ratchet 1aau.to/oHJ/1AXAA00016
• Torque Wrench 1aau.to/oka/1AXAA00044
• Rust Penetrant
For More Info visit us at 1aau.to/h/afY/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. 
Авто/Мото
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Is this the same procedure on the manual transmission?
This mechanic is one of the best teachers on RUclips
Outstanding video, very detailed instructions, thanks
This video has help me out on my 2010 Ford Fusion(cousin model of the Mazda 6).THX. One thing tho, those equipped with manual transmissions, you want to drain or catch the gear oil, I would say 1.5 to 2 qts had poured out the output shaft when I removed old axle.
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +Pierre Exalus
Thanks so much for the video. It gave me so much confidence to replace the left axle. No more clunking noise when going over bumps and turning into driveways. This is 2005 Mazda 6I.
+Folabi Olat Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Would this replacement be similar to doing it on an '07 Mazda 3?
Would this be the same tools/procedures for my 04 mazda 3
Excellent tutorial - thanks!
+Darren Wilson Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
I'm pulling the motor and trans out of my 07 mazdaspeed6, very helpful to know how to get the CV shafts out!
Very informative video as usual!
Personally I am one of those clean freaks! LOL
Just a suggestion to go 110%, focus on cleanliness a little deeper, such as ensuring splines, for example, love to be greasy. Its great to spray them like you do, but I find myself spraying, using a bristled brush, then hit the splines with a rag and apply a tad of bearing grease on both splines, but that's just me!!
Keep up those informative videos!! :)
+Dreux Lescell Thank you for the suggestions! 1aauto.com
REALLY appreciate it!! Others dismantle way to much😉
Own a mazdaspeed 3 your videos are very helpful lol
hey guys
BE AWARE!
I just changed the transmission axel seal because I had a leak after changing the clutch. changed the seal, and the seal was still there. turns out there are TWO CLICKS when you push in the axle. if you only do the first, the axle is in, but not far enough that the seal mates with the sealing surface on the axle. it's easy to push in by hand, if you are in this situation, without dismantling anything.
+Sebastien Tremblay Thanks for the tip! We'll pass this info along to our production team.
Thank you. May I ask: that tip w/TWO CLICKS, is it for every passenger car or just for certain models, like this one shown in the film? I need to replace CV Axles on 2001 Saturn SL2 (automatic).
I guarantee the slight video edit at 2:45 was because she went crazy and started beating the sh*t outta that cotter pin, kicking and screaming and cussing it! Not that i personally would do that, just a hunch.
Probably because she was using snips as plyers. Rookie mistake.
You are so clean to work a professional
I just finished installing a new cv axle
but after driving it for about a block the abs, car skidding and tcs (tcs off) lights turned. Any reason why this happened?
i wanna see more video of how to replace 2010 mazdaspeed3 rear lower control, if you have any video of it plezz post. thanks
Just need to know what fluid came out when i pulled driver side axle out. More came out when i started vehicle with axle out. 2020 cx5 awd
Can u put auto drive shaft in manual atenza for a 05 mazda atenza wagon fwd
Awsome video and thorough
+TheBrakeMan Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com:
1aau.to/m/Shop-1AAuto-c
Will this be the same for a Mazda bongo? Can’t find much info for this on a bongo. Thanks
Excellent video tank saludes
Sue, i have a 2015 cx-5. Looks like in my car there's less suspension parts to move. Is it generally the same process?
I noticed some differential oil leaked out when you removed the axle. Is the differential on an automatic car sharing the transmission fluid and you top it up via the transmission dip stick, or is the differential separate and you top it up somewhere else?
Excellent videos.... Any way you could maybe do an R&R of the rack and pinion on the Mazda 6.... I think I may need to eventually replace mine... I think the seals are leaking...
Thank you for the feedback! +Flyby 1000
Does the part that connects the tranny/Wheel axle need grease, i know the other side mazda have this intermediate shaft???
Very good video.Detailed.
Thank You
+ilho G Thanks for the feedback!
Video well done....😃
Can you tell me why my mazda6 06 is still making noises after I replaced it monday. When I turn right I hear a squealing noise
I have a question, when you disconnect the tie rod, does the car misalign or nothing happen? passager side
Do you have to take the wheel well liner off?
Very very curious is this is a customer's or employee's vehicle. Either way, love the videos.
So I had a tear cv axle so I replaced it but I still hear a pop noise on the cv axle
I replaced why is that ?
Sue, I love your videos and they are very informative. However, when you tightened the lower control arm nut at the wishbone, the hub must be raised to avoid tearing the bushing. I own this model and tighten the nut when the wheel is on & the vehicle on the ground. Conversely, you can put a jack under the brake disc & raise it the correct height. Am I incorrect?
+Stuart Bear Thanks for checking us out. You can put a jack under the control arm of the vehicle to raise it to the correct height, be sure to consult a local mechanic if you are unsure of where to place the jack. 1aauto.com
That over spray on that inner fender liner is mint
+Oh Billy TV Thanks for the feedback!
How to replace the steering box of a Mazda 6 2007 ?, or if you have a video on how to do it?
Rack and Pinion.... But yeah... I just asked that too....lol
I'm wondering if it's the same process for 2010 mazda 6 cause I see different part on the wishbone
+peaceWorker77 We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Thanks for checking us out! 1AAuto.com
Thank you
Can I use this video to change the rear axel on my 2007 Mazda 6
+Randy Huerta We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c
Would it be wise to replace the output seal at the same time?
I didn’t replace my rubber CV seal & I’m regretting it.
The best
SUE IS MY FAVORITE! 🤘💀🤘
I need to do this to my 2004 Hyundai Elantra. Hope it's similar.
+The Secret of Self It will generally be the same, but it would be best to try to find a video or some info online for your specific vehicle. Thanks! 1AAuto.com
Is it the exact same procedure on a 2006 mazda3 ?
+marc desaulniers We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
Mike can you come back to doing videos??
so you don't have to drain the transaxle fluid before starting?
No
I just got mine toda, im one socket short to remove it. Do yal have an instagram?
+Sde7th Offical Yes, our instagram name is 1aauto
thanks
Thanks for checking us out. 1aauto.com +Darth Masiah
Does this work the same on a Mazda 3
+Dante Hawthorne At this moment, the closest how-to video we have to your request is for this vehicle, which is very similar to the one you have. The steps may not be 100% the same, but should contain an adequate amount of information necessary for accomplishing this task!
So an alignment is not necessary after replacement?
The alignment is necessary. If you remove the Steering Knuckle you do need an alignment.
Is this the same method for the Mazda 3
+William Bayona We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
How much dollars is a work like this worth? With all the pieces included.. $400,500,600?
i need you to work on my m6 so many problems
its that easy to fix? amazon hear i come lol
Got that nice lift but no air tools?
+jessie lafferty Most people don't own air tools so we try to demonstrate with tools a common person would have available. Thanks for watching.
First like and view!
you make it look easy but itll take really like 2 or 3 hours haha
Good vid except you skip over the parts you have problems with. Which is where otehr people are going to have problems. So, yeah.