How to Replace Valve Cover Gasket 03-13 Mazda 6
HTML-код
- Опубликовано: 8 сен 2024
- Buy Now!
New Valve Cover Gasket Set from 1AAuto.com 1aau.to/ic/1AEG...
In the video, 1A Auto shows how to replace a bad or leaking valve cover gasket. The video is applicable to the 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13 Mazda 6
This process should be similar on the following vehicles:
2003 Mazda 6
2004 Mazda 6
2005 Mazda 6
2006 Mazda 6
2007 Mazda 6
2008 Mazda 6
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oek/1AX...
• 10mm Socket 1aau.to/odp/1AX...
• 8mm Socket 1aau.to/odp/1AX...
• Needle nose pliers 1aau.to/o8/1AXA...
• Needle nose pliers 1aau.to/o8/1AXA...
• Ratchet 1aau.to/oeA/1AX...
• Socket Extensions 1aau.to/odX/1AX...
• Torque Wrench 1aau.to/och/1AX...
Subscribe: / @1aauto
Check out our playlist:
Mazda 6 2002-2007 1st gen GG1: • Mazda 6 2002-2007 1st ...
For More Info visit us at 1aau.to/h/fN/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. Авто/Мото
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
i know it's kinda off topic but do anybody know of a good place to watch newly released movies online ?
@@emilioalfonso2395 Get browser extensions. There are free VPN's and pop up blockers for sites like these. I also just posted 2 reply with lots of information and 1A or You Tube deleted it....
@@emilioalfonso2395 If you are still looking you can message me. Go to my You Tube channel and I have lots of ways of contacting me or the top right of the front page a the bottom of the banner picture. Good Luck.
She’s a good mechanic. I like the way she explains what she is doing step by step.
Very detailed video.
Thank you :)
This tech should be treated like GOLD! Very clear and concise. Thank you
+klg1001 Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com:
1aau.to/m/Shop-1AAuto-c
I've been watching her videos since purchasing a 07' Mazda 6. She's a natural instructor with great tonal and oration skills. She tells you what you need to know and nothing you don't. These videos are a wonderful source.
I’ve been a diyer for a while now and work on many family/friends cars, but I always like to do my homework before each job to make sure it goes as smoothly as possible and I almost always throw 1A auto videos into the mix for torque specs and things I would probably overlook on my own (like removing the cam sensor). Keep them coming 1A and Sue!
I know literally nothing about cars, but the way you did this I understood every step perfectly
Huge help. Felt great when i did it myself rather than paying the shop to do it. Save me alot of money
+T.A.E Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
This helped me out greatly! Now if I can find a video on removing and replacing the Cat Converter and exhaust for this same car that would be great!
+Jose Maldonado Thank you!
This will be my next diy on my GFs car. I replaced the slave cylinder last week. The gasket needs replacing along w the coils & spark plugs. Kill 2 birds. This will be the most in depth repair i do yet. Thank you for so many great videos.
You are a badass. Thank you so much for these videos. Seriously. Not only do you get to the point with great detail, but the camerawork/lighting shows us exactly what we need to see - the best mechanic tutorials on RUclips.
О Боги! Это видео спасло меня! Я не могла снять два крепления, и уже была в отчаянии, нужно было срочно менять крышку, но большинство видео без подробностей, а Вы просто спасение!
+LEMUR Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Thank you Sue there's a few things I would've missed without watching your video
+robert sherman Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Thank You for the video, I just replaced my valve cover on my 2008 Mazda 6 following this tutorial. It went great!!
+Ector Rodriguez Thanks for checking us out! 1AAuto.com
Thank you very much. I just did this on 2013 Mazda 3i.
Awesome video, before you remove the coils, vacuum all the loose dirt out from the engine valve cover you do not want that falling down inside of the engine...
i thought the same. and the rtv on her gloves while she installs the cover.... she knows the procedure well but her lack of careful technique made me cringe.
Very clean work
Amo a esa mujer mecánico!!!.....
Muchas gracias por el video , ahora voy a hacerlo en mi carro!!👍👍👍
+Alguien DBser Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Brilliant - a great instructional video, clear, thorough and precise
Warning everyone !!! the torque specs said in video are to much! you risk breaking valve cover/snaping bolts off I recommend 72 inch LBS - 80 inch LBS all around as said by Fel-Pro directly thanks
+Devo Thanks for the tip! We'll pass this info along to our production team.
Great video. I like she tells you what to do, and how to do it. Most importantly she doesn't Babble on about things that have nothing to do with this job. GREAT Instructions.
A lot of these Mazda engines are very similar. I just replaced my 2010 Mazda 3 and the visuals and steps were almost identical to this video. Thanks!
My parents have 2008 Mazda5 and 2012 Mazda 3 and the work I've done so far, the engines are all very similar.
+DaxonTV Thanks for the feedback!
your kidding it's this easy thank you so much...I am a 1a auto customer and will continue to be one.....
Thanks for checking us out. 1aauto.com +u tuber
Love your accent
Nice video, but I always check or replace the spark plugs as well, while I have the cover off on where it is necessary to remove the cover to access them. Your videos have been very helpful!
Maybe you could do more Mazda 6 videos that include all years that the 2009 is the same, depending on specialty vehicles like the Touring model.
Explaining what the different sensors are for is also very helpful when you come across them, depending which video that you are doing.
Keep up the nice work, and thank you!! :)
Perfect video! About to do it on my 04 mazda 6 when the gasket comes in!
Absolutely the best instructional video i have ever seen! Well done!
thanks for the video watch it a couple of times to make sure i took the correct steps and it was as easy as the video thank you so much! saved me a few maybe $$$$$$$$$. and while i was at it i cleaned where the spark plugs where cause of the little oil it had inside. but other than that it was easy too instal. thanks again!
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +Enrique tavera
Thank you so much
It is harder to get everything out of the way than it is to do the actual job without damaging all of the plastic components on these newer vehicles but great video nonetheless because I need to perform this same procedure on my wife's car!👍👍
+Just visiting this planet. Thanks for checking us out! 1AAuto.com
Thank you very much, the process is similar to 2011 Mazda CX-7 Classic.
Thanks so much for the help! You are the best mechanic ever explaining things!....
+Mary Hunter Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
You guys made me save so much money. Thanks for these videos
Thank you.
Thank you thank you thank you. You guys are the best!
Great video, torque is too high, striped a bolt. Aftermarket manual I have says 80 in lbs.
I can beleive that it s super shop. Please-1A Auto, come to Hungary!...Would be good.
Awesome this helps a lot it shows everything literally and it helps a lot
+Ezrin Morales Thanks for the feedback!
If no RV is used to further hold the gasket in place. Will that Lead to leakage? Or early signs of replacement.??
Super gut erklaert. Super klare Bilder- im Film Only my english is not enough, Danke Lady- Danke Sir.
big like
on 4:35 for me, it was very difficult to remove connectors. also good 20 minutes before attach, to glue gasket to cover because it always fall
What about adding petroleum jelly to the gaskets on install? This would also keep them in place when you flip the cover back over to install. And also keep the seals moisturized.
Can’t wait to do it my self
+Life Invader Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
Excellent tutorial!! I will use it shortly and thank you!!
Thank you for the vid! Awesome!
I could also refer to this video working on my 2011 Mazda CX-7 2.5L Duratec?
How long will this take on a 2012 is there a ball park estimate
I can see it's dangerous to bring your car to a bad/sloppy mechanics. They won't clean it properly or even worse they'll end up having debris falls into the engine.
My mechanic replaced this gasket like a year ago. I have an issue with it again. There is oil inside sparkplug hole cylinder 2 and 3. Do you recommend to add rtv around the small gasket that goes in the middle.?
wow didn’t break anything. good technician. those plastic bits really like to crumble at that age
Need a quote of valve cover seals. 06 2006 mazda 6 l3 engine,including shipping to gaborone..
Do i need to use the rtv?
If the bolts don't come out of the cover then would I have to replace the whole cover if a bolt breaks?
awesome, thanks
+PiKey You're welcome and thank you for checking us out!
@1A Auto Parts would you be able to do a vid for oil pan replacement?
+phoenixrising2430 We are always expanding our video library so we may have a video for you in the future!
@@1AAuto Transmission filter replacement as well please! Thank you!
My torque wrench failed me. One of the mounting bolts that dont come out snapped on me. Where do i find a replacement?
How do you clean out the oil from the spark plug hole
+Malik Browning absorb with rags, use an extraction tube/pump, or Spray brake cleaner inside the plug well, hold a rag over the plug hole and then spray with compressed air
What's the name of the sensor by the oil cap? I'm planning on doing a valve cover job and that's one of the areas it's leaking from. Also is there another gasket specifically for that sensor?
This is the VVT (variable valve timing) sensor and it was causing a misfire failure for me. It is why I was opening the valve cover in the first place but as it turned out, the cover was leaking in the center gaskets into the sparkplug holes. Did the whole thing in a morning including an oil change (this is recommended when changing the sensor).
PS there is the oil O-ring around the sensor in the valve cover but mine was fine.
Where did u get that exact torque wrench from
Would this be same with the speed 6? I know speed 6 is a turbo
Is it necessary to do all the cleaning and use the RTV? I found this video because I'm trying to save money by doing it myself, and I really would rather not have to spend *more* money to buy what I need to do that.
Yes it is due to the timing cover
Do you have to use RTV or is regular silicon fine?
+James Alston You will have to use RTV due to the higher temperatures they will be exposed to. 1aauto.com
Hell yea ima fix the car in our shop at school
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +Diving Duo
Is this process the same way for a 08 mazda 3 2.3?
+SupremeRaph This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-1AAuto-c
Can this torque method work for the 3.0 ?
+Gflackoescobar Official We don't have a how-to video for the 3.0L right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
That is a lot of RTV on the head.... none of that's gonna go get smashed into the head when you put the valve cover on?
I have mazda 3 2005 mines gotto change
Why did u change it?
Found out mine was gone while changing my plugs 😅
Does anyone know where I can get a new "blue plastic piece" for the emission tube?
I guess 1A auto ;d
Can you do a v6 please
+Jacob Ayala We're always cycling through common cars. We'll add this repair to our list! 1AAuto.com
My car is leaking oil from the valve cover, is this a common problem?
After a few years, valve covers need to.be replaces
👍👍
Can I use gasket maker as an RTV ?
84 inch/pounds and 123 inch/pounds?
+PASCA family Yes first go to 84 inch lb then finish them off at 123 inch lb.
@@1AAuto thank you!